Video has gaps - Audio from second source intact Merge/Sync question

I have multiple video files (the camera shut down and restarted 6 times) with a single complete audio file. I have been able to merge the first video file with the entire audio file*, is there anyway to sync the next video (which has a section of identical audio) to the new merged file, and then continue with clips 3, 4, 5, and 6?
* Net result is a 10 minute video synced perfectly to a 2 hour audio file.

You'll have to do this manually.

Similar Messages

Satellite L-50 can't play audio from multiple sources

I can't play audio from multiple sources. This is very annoying when I have 2 youtube videos playing, if I start playing something on the media player, there is no sound on media player, it's the same when I have 2 media players open and 1 youtube video playing, youtube video doesn't have sound..
I already have all the latest drivers, last DTS driver update was in 2014, sound update this year's february..
25/02/14
DTS Studio Sound
DTS Inc.
Windows 8.1 - 64 Bit
1.01.2700
I don't know if this makes sense, but I got newer DTS sound driver which I found, It's not my laptop model, but they all seem to be the same - v1.1.88.0
I uninstalled DTS software and still had the same problem, so it's not affecting sound driver in any way..
10/02/15
Sound Driver
Integrated Device Technology Inc.
Windows 8.1 - 64 Bit
6.10.6491.0
IDT audio driver has newer release date, but the driver version is the same as the 2013 one..
Why are toshiba releaseing old driver as 'NEW' ?
2nd is my speakers advanced settings, nothing changed when I disabled "Allow applications to take exclusive control of this device"
Attachments:
audio.png ‏6 KB
test2.png ‏7 KB
specs.png ‏16 KB

Can you check the full model and part number from the laptop?
- Peter

Satellite L50-A-19N can't play audio from multiple sources

I can't play audio from multiple sources. This is very annoying when I have 2 youtube videos playing, if I start playing something on the media player, there is no sound on media player, it's the same when I have 2 media players open and 1 youtube video playing, youtube video doesn't have sound..
It goes away when I plug out my headphones..
I already have all the latest drivers, last DTS driver update was in 2014, sound update this year's february..
25/02/14
DTS Studio Sound
DTS Inc.
Windows 8.1 - 64 Bit
1.01.2700
I don't know if this makes sense, but I got newer DTS sound driver which I found, It's not my laptop model, but they all seem to be the same - v1.1.88.0
I uninstalled DTS software and still had the same problem, so it's not affecting sound driver in any way..
10/02/15
Sound Driver
Integrated Device Technology Inc.
Windows 8.1 - 64 Bit
6.10.6491.0
IDT audio driver has newer release date, but the driver version is the same as the 2013 one..
Why are toshiba releaseing old driver as 'NEW' ?
2nd is my speakers advanced settings, nothing changed when I disabled "Allow applications to take exclusive control of this device"

I see that the option called “give exclusive mode applications priority” has been checked.
Usually different applications and programs can access the sound card simultaneously.
For example: you can hear the sound in game, while you can run your own music via an external player.
This is prevented with these options “give exclusive mode applications priority”.
Maybe you should disable (uncheck) this option to prevent the different applications for using this exclusive mode stream.
I did it for my DAC. I set the DAC for exclusive mode. Once my audio playback software starts to play music, no other software is able to share the DAC.
However, I use Win 7 and Realtek sound driver… It’s another configuration.
So it’s not known to me if your issue is related Win 8.1 system or maybe limitation of sound driver… it could be also possible that one of your sound applications don’t allow multiple sound streaming.

Premiere Pro CC (2014) has ERASED AUDIO from my original media?

I know there are a lot of threads out there about not hearing audio, or missing audio. Maybe this is a related problem, but I didn't find anyone who described the same problem I'm having, or had a solution.
I opened up a project today that I've been working on for a few months, a documentary of sorts, with interviews, b-roll etc. I'm editing with the native footage, which is AVCHD, shot on a Panasonic AF-100. Today, I noticed that two of my interview clips seemed to not playback as I watched it. I wasn't too concerned at first because I know PP can be buggy, but here's all the things I did and how the problem escalated:
- I tried playing it again, to see if it was a fluke... no audio
- I looked at the audio in the timeline... no waveform, just a flatline... no audio.
- I looked at the whole interview's audio waveform... about HALF of it is FLATLINED... like PP had erased or overwritten the audio somehow!
- I restarted PP... no audio. Then I restarted the whole system... no audio.
- I went back to the original clip in the Media Browser to try to re-import it... no audio.
- I opened Prelude to try to look at the original media from different software... no audio.
After a few months of work (and an editing budget of tens of thousands of dollars), I am 4 days away from the delivery date, and PREMIERE IS ERASING MY MEDIA!!!
If this is not solved, I stand to lose more than just this job, but this entire client, my reputation, and my livelihood. ARE YOU LISTENING, ADOBE? This is my career we're talking about. Please help.

Thanks for the reply shooternz, to answer your questions...
Any recent updates? eg O.S
- Nope. I'm running OSX 10.9.5 on a 2014 Mac Pro. I've been told to avoid Yosemite at all costs.
Have you checked the source files of the affected clips in another player?
- Other than Prelude, no. One thing I hadn't tried yet was to fire up my old version of Final Cut and see if I could transcode it from there with audio. What other player can read a raw .mts file?
What does the Clip in the Bin and the Source monitor indicate ( Info)
- The icon indicates that there's audio, and when I look at the waveform in the source monitor, it looks like just what I hear... a few minutes of regular audio, then flatline, then some audio again, then flatline.
Have you tried your back up project file?
- No, I didn't want to lose the editing progress I had made today.
Is the audio from camera or from other recorders?
- from the camera
Anything common between the affected clips? eg merge, FX,
- not that I can tell, at least nothing that wouldn't also be true of a dozen other clips which seemed unaffected. no clip effects, etc.
What does the Audio Mixer and Audi Meter show?
- shows nothing (where it is flatlined in the original clip) as I would expect.
AFAIK - There is no way PPRO can "erase" just the audio from your source file. At least not without the editors input.
- That's what I would think too. But even if it's not "technically" possible, it seems to be "effectively" possible because nothing in the creative cloud seemed to be able to read the clip properly. As I mentioned in my post above, it seems to have only been solved by relinking the clip to a .mts file recovered from a back-up of the project from a couple weeks ago. Though, for what it's worth, the file sizes are identical and created/modified dates match as well... so yes, it would appear that the file has not been altered, but regardless, I can't point to it and get the proper audio.

Recording Audio from additional sources: Why doesn't the "Audio File" show

Hi, when recording audio from another source and saving: where does logic store the file? Shouldn't it be in the "audio' folder or the set path you set it to>?
For some reason after we record the "Audio File" we recorded is not to be found in the "Audio" folder we created within our project?
clues?

Can you define "from another source". I'll assume for now, you mean, from an external live source, like a vocal, or guitar.
Yes, if you had saved the song using the "Save As Project" command, the audio path to that songs audio folder should have been set. and all audio files recorded into that song would reside in that location.
The only thing that you might want to check, is hit "A" with the song open, and make sure "choose path" is set to "Song Recording Path" and not "Global Recording Path".

Audio from flash sources is playing in the background, even though the sources of these have been closed.

Audio from flash sources are still playing in the background after their sources have been closed; audio also starts playing when I start the browser. Closing plugin-container.exe in task manager solves this, but I do not want to do this every time I have audio in the background that should not be there. Not a good move to launch a browser where the kinks haven't been worked out. Have tried to inactivate addons etc. This problem is related to FF5, but have also happened earlier, with FF4. Solved that time by moving to Chrome instead.

Sounds that the plugin-container process isn't closing properly.<br />
See http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
There are other things that need attention.<br />
You have a corrupted Firefox 3.6.13 user agent: Firefox/2.0.0.14;MEGAUPLOAD 1.0
See:
* [[Web sites or add-ons incorrectly report incompatible browser]]
* http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

In v.11, how can I capture video but not audio from a camera?

In v.11, how can I capture video but not audio from a camera?

Rodney
I see what you mean....Premiere Elements 10 appears to be the last version that had options for the user to select Capture Video and/or Audio in the its Capture Window.
If you are doing DV data capture firewire into the Premiere Elements 11 Capture Windows and want a final file without audio and you cannot do this at the camera level, then consider....
1. Do the Capture "to the Timeline" - video linked to audio result on the project's Video Track 1
a. Right click the Timeline DV AVl and select Delete Audio and then edit accordingly.
or
b. Import the DV AVI but, when you go to export it, in the export settings, remove the check mark next to Audio so that the export contains only the video portion.
Publish+Share/Computer/AVI with Presets = DV NTSC Standard
Please let us know if any of that worked for you.
Thank you.
ATR

Recorded video has no audio

Hi, i have lumia 1020, the problem is that the recorded video has no audio. It worked for the first 2 video i have made . But it doesn't anymore.I have done a factory reset. But it still not working. The sound is not recorded anymore.
Is there a way to solve this problem.
Thanks !

Hi gent123,
This is for a Lumia 925, right? When did this issue start to happen? Did something happen to your phone prior to this issue? Are you also experiencing the other issues mentioned above, like issues with voice commands and audio note recording? What troubleshooting steps have you tried so far?
The video audio is captured by the phone's secondary mic, which is located on the top of the phone, beside the headset port. If you have a phone cover that might block the secondary mic, try removing it for a while and see if the audio will be captured when recording videos. Try also to reboot the phone by pressing and holding the volume down + power keys until it vibrates and restarts.
Make sure that the phone's software and system apps are updated as well. Check this link for steps on how to verify if the system apps are up-to-date: Nokia Windows Phone 8 App Updates.
Let us know if this information helped you.

Autosync - Sync Detection Problem with Video/Audio from different sources

Hi,
i've got the following problem:
I'm editing a feature film, where video comes from tape and audio from harddisc-recorder. The clips are combined/linked manually via in-point (slate).
If I cut this video/audio combined clip in the timeline, and move only the audio 3 frames to the right, sync detection informs me correct about the out of sync problem (3 frames). BUT: If I split the audio file in two pieces, the left clip still has the "out of sync" info in the timeline and remains "linked" to the video, but the right clip doesn't show his relation to the video anymore !!!
Is this a bug ?
Because, if I use video and audio from one "media-source", ex dv, the sync detection in the timeline is working correct with the above example ?
I'm lookin' for a similar way to sync clips like autosync with media-composer and thought combine audio and video clip to a new combined clip should do this....
Thanks for help !

I have my waveforms back! Thank you SO MUCH! I looked everywhere and just couldn't find a setting for this.
As for the sync, I guess that's OK - it's no worse than what I had before (and with the waveforms back, less of an issue to do manually). Would be nice if they'd add the ability to offset the audio track in the Modify Clip screen at some point (and it would open up the multi-cam sync feature to more users), but I can cope without for now.
Thanks again for your help.

No audio from second Channel using Webcam Capture with ASIO source

I am trialing elements version 10 as I am looking for a capture / recording / editing solution for making music videos. I want to be able to record from my webcam and also record two audio streams silmutaneously.
I am using a logitech webcam pro 9000 and a line6 Ux2 Audio recording Sound device. The UX2 is an ASIO compatible device that allows two streams to be recorded; in my case guitar and Microphone for voice. I am able to do this in ASIO comaptible audio editing software.
So I have tried selecting the Audio device settings prior to starting a capture but each time I start a capture the audio device reverts to standard windows Realtek audio device. I then select the Line6 Device in the capture window and procede to record but I only get video and one audio channel. Is there a way to record live from webcam AND get both audio channels using ASIO driver?
Cheers
Greg

Only if your camcorder records in stereo. Otherwise, you will only get one channel of audio and you will need to use the Fill Left or Fill Right audio effect to spread the audio across both.

Looking for a wireless audio from any source`

I have an Apple TV, iPhone 6, and Dell PC. I am shopping for a self-amplified speaker system which can WIRELESSLY stream audio over my home WIFI network (probably not Bluetooth) for BOTH the following:
MUSIC AUDIO, from ITunes, Spotify, apps from iPhone or PC
VIDEO AUDIO, from Apple TV or broadcast TV
Shopping around there seem to be several brands which do one or the other, but it’s not clear to me there is any system that does both. Is that true?
For example, Apple’s AIRPLAY enabled speakers (or normal speakers hardwired to my TV) seem require streaming though Apple TV. Can I also stream Spotify or other apps with AIRPLAY speakers? And NON-AIRPLAY speakers (like SONOS) clearly support most streaming sources, however do they also work with Apple TV for video, and if so without hardwiring the speaker to the TV?
I’m looking for something that does it all, and without complicated workarounds, and with a seamless interface on my device. Wirelessness of the speaker itself—i.e. not hardwired to signal source like SONOS does—would be an added bonus, but not necessary.
Some brands I am looking at: KEF SONOS Bowers & Wilkins Bose
Can you help me, or set me straight if I am wrong about these assumptions?

you should checkout the program called airfoil it let the user stream audio with airplay from any program not just itunes
so that would make spotify be able to play out of airplay speakers be it an Apple TV or airport express with speakers connector or a
device which was build to support airplay

Static in entire video after detaching audio from clips

After exporting, I was having some audio/video sync issues with my 1 hour and 38 min movie.
It was suggested that I detach the audio from the clips...so I tried it on my 6 minute preview with good success. I exported the preview and the sync problem was fixed.
So I started detaching the audio to fix the regular 1h 38m movie. I got through most of the clips and then went back to play a certain section of the movie...and I noticed that now there is a bunch of static in the entire movie.
How do I get rid of the static?
This also has seemed to really slow the project down. Anything I try to do on the project and iMovie just tanks.

Thanks for your reply Geoff,
I basically have a soundtrack 3.28 minutes long which I want to be the only noise thats playing throughout my interchanging video clips, so I would like to completley move the audio from the all of the indivdual video clips that I am adding in, I thought the 'detatch audio' button would be the one for this, but as I continuously play back bits of the movie to prefect editing I can still slightly hear the sound from the individual videos that I am adding?
So frustrating, but Im sure thats its something real basic that I am missing.....

Stream audio from a source

Hi,
I was wondering if it were possible to stream audio from an internet radio station. Can anyone point me in the right direction?
Many thanks in advance!

I found this: http://techtips.salon.com/use-iphone-webcam-3623.html
I would suggest the use of an analog capture card, like a Dazzle, and the official Apple Composite video cable. I'm not sure if it would work, but the systematics would be (Output) (phone)—(Input)-Output (capture card)—Input (your PC)
I can't verify this, maybe if I get the Apple AV cable I can, since I have everything else.

Videos has no Audio

So, has anyone found out what version of Quicktime will work with iTunes, to give me audio with my iPod converted videos ?? It plays the videos fine outside of iTunes and my iPod.

If the videos are multiplexed MPEG files then the audio and the video are muxed onto the same track. QuickTime, and therefore any application that uses QT like iTunes, the iPod, iMovie (Mac app), etc. expect two separate tracks, one video and one audio. So when you convert these muxed files, the video is played and the audio is not heard.
iPod plays video but not audio of some exported files
http://docs.info.apple.com/article.html?artnum=302588
So you need to do a conversion on the file first. As Niel already pointed out, MPEG Streamclip is a popular one that comes in both Mac and Windows versions and is known to "repair" this problem.
There are other applications that can do this as well. Try searching the iLounge.com web site for more conversion help. But your root cause is the muxed MPEG files.
Patrick

Photoshop Video has no audio when playing WMV files, please help.

Hello. My Photoshop video editor works great with MOV files after installing Apple Quicktime the other day.
Today I tried to load a WMV file into Photoshop's video editor. I get the video, but no audio. (The subject file plays perfectly in Windows Media Player.) The master audio mute at the left end of the timeline window says the audio is not muted (and I test toggled while running the video). And the video properties dialog that is accessible on the video clip icon itself shows the audio is not muted, and that the volume is set at 100%. I see no other place where the audio could be killed.
QUESTIONS:
1) Is this another file type compatability issue, and if so, how can this be fixed?
2) Would Apple Quicktime PRO be appropriate to convert the WMV file into a MOV file, so that I could then work with all of my WMV files?
Thank you for your assistance, Chuck

Load the movie into QuickTime Player, open the Movie Inspector (Window menu), and look at the Format section. That will show the codecs used for the video and audio, the audio being the second one listed. Post that information here and someone can probably tell you what you'll need.
Regards.

Video has gaps - Audio from second source intact Merge/Sync question

Similar Messages

Maybe you are looking for