Video hides everything else in Projector mode!

I have a M4V video file embedded in a Flash movie, and I need to play the Flash movie at full screen using the Macintosh Projector format. When the Flash file is done in Actionscript 2, everything appears as it should, but if the Flash file is done in Actionscript 3 (which this particular needs, since it uses armatures), then the video fills up the whole screen and hides everything else. I figured out how to prevent the video from scaling to fit the screen (set the scaleMode parameter to "noScale"), but it still shows the video in the center of a black screen. How can I get it to stop messing with the file and just play the @#$! video where I put it?

if you're using an flvplayback component, assign its fullScreenTakeOver property to false. if you're using some other method to play your video, use the help files to see if there's an identical property for the class you're using.

Similar Messages

Youtube won't load any videos? everything else loads but the video is a blacks screen :(

I have a new macbook pro, i haven't had it for very long but just earlier this week it started messing up, not sure if it's my wifi (bigpond) but I really want it to work is anyone else having this problem?

Hi ..
Most YouTube content requires Flash ... and doubt it's a Wi-Fi issue.
Open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Using Safari to view YouTube? With Safari open, press Command + Option + E to empty the Safari cache.
Quit and relaunch Safari to test.
If that doesn't help, you may have the YouTube HTML5 beta enabled.
Opt out here > YouTube
Message was edited by: Carolyn Samit

When I connect my iPad2 to my tv using the AV adapter I can hear sound for everything else except for my movies. I can hear tv shows, music, videos off YouTube, etc. I just can't hear the movies. Any ideas of what may be wrong?

When I connect my iPad2 to my tv using the AV adapter I can hear sound for everything else except movies. I can hear tv episodes, music, YouTube videos, etc. anyone have an idea of how to fix this issue? Thank you for your help in advance.

Just connect the new iPod to your computer and setup the iPod via iTunes (instead of via wifi).
If you want to copy all the infor from an old iPod touch to the inew iPod see:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

Why do videos look so bad in QuickTime X and look good in everything else?

Why do videos look so bad in QuickTime X and look good in everything else?
Any way around this or is this something apple needs to fix?

OK, videos!
What kind of videos?
Have you tried using Quicktime Player 7?
Mac OS X 10.6 includes QuickTime versions 10.0 and 7.6.3. The QuickTime 7 player will only be present if a QuickTime Pro key was present at the time of installation, or if specified as part of a custom install, or individually downloaded.
http://support.apple.com/kb/dl923
Snow Leopard update 10.6.4 included an update to 7.6.6 (if installed). You can install it from the above link even though it says for 10.6.3. It's the same version of QuickTime Player 7.6.6.
Only QuickTime Player 7.6.3 or 7.6.6 can be updated to "Pro".

I watched a video on my iphone, and it worked fine. I wanted to watch it on our MacBook for sound and clarity, and every time I accessed it, it locked up. To the point that the only solution was holding down the power button. Everything else worked, and

I watched a video on my iphone, and it worked fine.
I wanted to watch it on our MacBook for sound and clarity, and every time I accessed it, it locked up. To the point that the only solution was holding down the power button.
Everything else worked, and I could freely enter information and open other Facebook entries, but when hitting the "play" button or clicking on the video it immediately bought up the spinning beach ball, and would never clear. Any solutions?

Did you try viewing the video in a different browser? Firefox or Chrome maybe?

My ipod touch is disabled for 22 million minutes and I want to fix it but I dont want to lose my pictures and everything else. Help please

my ipod touch is disabled for 22 million minutes and I want to fix it but I dont want to lose my pictures and everything else. Help please I dont remember the last time I updated it. Idk I think its been a year in an half since I known about it being disabled. What do I do? Im scared to restore it because I dont want to lose my stuff.

You have to restore and thus erase your iPod. that is how it works.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Photos
- If they are in an iPod backup then restore from that backup. See the restore topic of:
iOS: How to back up
- If they are in the iTunes backup then get them from the backup by:
Recover iPhone, iPad or iPod photos from backups with Picturescue
- If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer

Can't get photos onto iPod. Everything else is OK.

When I try syncing photos from iTunes to my iPod I get the "The disk could not be read from or written to." error message. Everything else gets synced (music, video, podcasts).
I tried reseting my iPod, rebooting Windows, the software was just installed when I got the iPod so it should be fresh.
Any ideas?

Hello . I have the exact same problem . After playing with reset - reinstall and speaking to apple directly for over 2hrs. I have found that there is no simple solution . It must be an Xp problem . Customer support suggested that the problem may be remedied if I create a new Xp user and reinstall to that user . It did not work . However - if you want to get pictures on your ipod and you can get videos on your ipod then do as follows - use microsoft movie maker - free with Xp - to make a slideshow of your photos . Then convert the .avi slideshow into ipod format . Put the video slideshow on your ipod and enjoy . You can pause during the slideshow to show people individual pictures . Just a note I can now no longer get podcasts on my 30g video ipod . Starting to wish I kept my hassle free , itunes free flash usb mp3 player .

Why would my Ipod Classic 160 GB (Late 2009) have remaining 224 MB or 0.20 GB of Used "Other" Capacity when everything else was restored to default as I intended?

I'm running the latest version of Itunes 10.3.1.55. I have updated the most recent update of Ipod software 2.0.4 PC. After a recent OS crash on a different PC running Vista I lost all files so upon this installation of Itunes I performed Restore to accept my loss of media and start a new library on this Windows XP SP3 PC. Upon restoring to factory settings, Itunes, and my ipod in the about menu say I have 224 MB of Used "Other" Capacity. This reads as 0.20GB on Itunes. I have 0 songs, 0 photos, 0 videos, 0 podcasts, 0 iTunesU, 0 Contacts, 0 notes, and the 3 default games which I assume are apart from the total capacity as they were the first time I plugged my Ipod in. The 0.20GB is part of my total available capacity taking it from 148.79 to 148.5 or so. I have restored 3 times, the first of which was when all my Ipod contained was 5.1 gigs of unknown to myself "Other" files. which it diminished to the 0.20 I am at now. I am confused as to why Restoring would eliminate all except whatever is left that I can't identify, when it cleared everything else that I intended it to. Any Ideas would be appreciated. This is not Urgent as I'm currently importing albums and expect them to sync correctly, and the used space is not significant, but I am confused as I've explored the disk in windows, and seemingly all but manually formatted the drive. It may even change after I sync for the first time again so I hope I haven't spoke too soon. If that is the case I will post when that time comes. Haven't seen this situation on the forums or on google search. If you want to take this task on, Good Luck!

my summary tab shows the total capacity of my ipod as 74.31 GB's with only 5 GB's of music and other on the ipod. What is taking up the other space? It should be showing a total capacity of 80 BG with 75 GB's left. What's up? Any body know?
All hard drives never have the full advertised storage space, and as a general rule it's around 7% less than stated.
It's because hard drive manufacturers calculate hard drive space different than computers actually read it.
For a full technical explanation, see these.
Hard disk: Is it missing space?
How much content will fit on my iPod?

My notes won't open on my iPod touch 5 g it lags and closes everything else is fine I need my notes all my passwords are written there in my notes.

My notes won't open on my iPod touch 5 g it lags and closes everything else is fine I need my notes all my passwords are written there in my notes.

If on a computer browser you go to icloud.com and sing in are you notes there? If so get them off.
Next,
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iCloud and delete the iCloud account from the iPod,. Note this does not delete the account, only deletes it from the iPod. Then sign back in.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Backup and then restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

How do I get 'everything else' from my ipod to the mac?

Hello,
I have a video ipod with music, videos and pictures on it. Since it was originally synched to a PC I wanted to get a macbook pro I recently purchased authorized so I did that and followed the directions I found in a doc on apple support to transfer purchases, which all worked well.
The music is there but problem is 'everything else' on the ipod isn't on the macbook and it looks like the popup message indicate that if I chose to sync it they will all be deleted. It looks like the 'original' computer I have, which is in storage at the moment, is the only that cany do this type of sync.
My question is how to I get 'everything', including music I didn't purchase through the store, from my ipod on to the mac so when it synchs I won't get the popup message wanting to delete everything on my ipod? I would hope there is a way to do this but so far I haven't found it.
Thanks for all your help.

check this post by Zevoneer.
JGG

Media Encoder Slows Everything Else Down

Hello,
I'm a happy new user of CC 2014 for the most part, just having one issue so far. Whenever I transcode with AME CC 2014, everything else on my computer becomes unbearably slow. Most of my searches for this issue have turned up complaints about AME itself being too slow. I'm having the opposite problem. AME is ripping through transcodes like no one's business, and I'm very satisfied with its vastly improved performance from Compressor and other older software, but I need to be able to do other things while I'm transcoding! (NOTE: I was not experiencing this issue with AME CS 6)
Based on some advice I got, I made sure that my Renderer was set to Mercury Playback Engine Software Only and not Mercury Playback Engine GPU Acceleration (OpenCL). Unfortunately, I noticed no change between the two options. I tried changing the Memory allocation in Preferences as well. Here is a screenshot of my CPU's memory usage across two test transcodes. The first hump shows ~96% CPU usage by AME when I allocate 10 GB to AME and 6 GB to other software. The second hump, also ~96%, is from allocating 1 GB to AME and 15 GB to other software. No improvement noticed when tweaking Memory allocation settings.
When AME is transcoding, my Wacom tablet (USB) slows down until the cursor is moving through sludge, appearing and reappearing constantly. Interestingly, my bluetooth mouse does not experience the same decrease in responsiveness, but basically all other software becomes unusably glitchy and slow.
I like the new AME render speeds, I just want to strike a balance between fast rendering and multitasking in other video software. Any ideas of how to fix this problem?

Interesting. But to the extent that I'm describing? The jump from AME CS 6 to CC 10 is enormous, with CC 10 I basically can't transcode and do anything else on my computer at the same time. I doubt that Adobe designed their product to be used exclusively in this way.

I can't print. When I go to file-print, nothing happens. My printer is working just fine with IE and everything else.

I can't print. When I go to file-print, nothing happens. My printer is working just fine with IE and everything else.

Try the Firefox SafeMode. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

I have an Imac. When I click to open google maps a permeable but dark screen covers my monitor screen and I get a note that tells me to shut down the computer and restart it. This hasn't helped. Everything else seems to work fine.

When I attempt to open google maps in Firefox on my Imac, a dark screens descends over my monitor screen and a note tells me there's been an error, no number is noted, and that I need to turn off and restart my computer. This doesn't help, but everything else works, including google maps in other browsers.

This is a kernel panic.
First verify that Firefox is fully updated including all extensions.
If this fails to fix....
Restart in Safe Boot mode then open Firefox.
* shutdown
* start the Mac and *wait* for the startup chime to sound
* after the sound, press and hold down the shift key
* keep holding and *wait* until the grey  Apple logo appears
* now release the shift key and just wait (it could take a few minutes)
* eventually the login screen appears with the words SAFE BOOT
* login and open Firefox.
If you continue to have problems see this article for more options to fix.
http://www.macworld.com/article/2027201/how-to-troubleshoot-a-kernel-panic.html

I'm unable to steam flash videos in Firefox. I can view youtube videos, but nothing else. Some videos take forever to load and my webpages are starting load slo

I can view youtube videos, but nothing else. Some videos take forever to load and my webpages are starting load slowly as well.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

No sound with apps and alerts unless headphones are in. Everything else works well. I tried resetting but it didn't solve problem.

No sound with apps and alerts. Everything else works. Tried resetting, didn't solve problem. Apps have sound with headphones only

Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Video hides everything else in Projector mode!

Similar Messages

Maybe you are looking for