Video import crash

I have been trying to import video into Priemer Pro (6) and every time I import a video that is longer than 5 minutes it crashes. If I go in and import individual files the audio imports fine, but video files causes it to crash. I have ran the latest updates. I use a Panasonic P2. Any advice or help would be greatly apperciated.

FAQ: What information should I provide when asking a question on this forum?

Similar Messages

Final Cut Pro Video Import Crash Problems

Whenever I try to import video files into Final Cut Pro X the program crashes. I've tried numerous formats and nothing is working. If it does pull the video in and lets me see it briefly prior to crashing, the footage appears shaky and with bright green lines running through it. It does not look like this if you play the clip outside of FCP. I've used FCP to make videos within the last year without this problem and have updated as well as uninstalled and re-installed the software to see if that would helped, but nothing has worked. I am stumped and my client is getting antsy for a finished product. Please advise.

I've had the same problem on both my laptop and my desktop:
Laptop specs: 13" MacBook Pro (2012) / 2.5 GHz Intel Core i5 / 8 GB 1600 MHz DDR3 / Intel HD Graphics 4000 513 MB / 450 GB Free space
Desktop specs: iMac (2009), Intel Core 2 Duo, 2.66 GHz / 296 GB Free space
I'm feeling like a tech moron though as I am not sure about finding this information, "Frame size, frame rate, video codec, audio codec, sample rate."

Video import crashes iTunes 7.5

I just bought a new PC and I'm trying to get my iTunes library set up again.
I backed up iTunes to about 7 DVDs from my old computer, but I really don't want to change the way all my music is organized if I just shove in the restore disc. I've had a file/folder structure I've been using for 10 years for my MP3 files and I'm not willing to give that up.
I imported all my straight MP3 files without issue, as well as the folder "iTunes Music" from the old PC that I copied over to this PC.
The problem comes when I try and import my videos. I know for a fact these video files are good and in the proper format, they worked on my old PC.
When I select the videos folder, it imports about 50 videos then dies on a certain file. I've removed that file from the folder and tried it again. I got most of the videos to import but there are a few that are causing issues. As soon as the folder import hits one of the "bad" videos, iTunes just crashes out.
Like I said, I know these video files are good as they are on my 80GB Classic right now.
I did upgrade to iTunes 7.5 right prior to importing all the videos, which could have something to do with it. I'm not sure at this point but it's kind of frustrating. First of all I'm going to have to do a complete sync with the iPod again, and now I'm going to lose some of the videos I had before on it.
Upon exiting iTunes 7.5 I also frequently get a message that iTunes has stopped responding.
Any ideas?
Message was edited by: DonnieZ

Same here, though on XP. Have tried cleaning registry, reinstalling, deleting preferences. Created a new user with no library and I have the problem there, too, so it's not the library.
Is there no one to call about this??

Panasonic HDC-SD9 video import crashes iMovie

Everytime I try to import video from my Panasonic HDC-SD9 using iMovie it crashes the program.
A google search on the problem led me to installing the Quicktime plugin Perian 1.1 but this did nothing to help the issue.
Other people have recommended purchasing ShedWorx’s VoltaicHD Converter but I'd rather not have to purchase software to import video into a mac that just supposed to work with everything... additionally ShedWork's site said that Intel Macs should be able to import AVCHD files.
Anyone have any luck fixing this issue? Or know when Apple plans on supporting this camera?
Thanks in advance for any help, I appreciate it.
-- Mike

You have lots of company. Have you checked out this thread?
http://discussions.apple.com/thread.jspa?threadID=1413097&tstart=15
Here's a simple solution. Sell the cam and buy miniDV.

IPod Touch 4G, "Video" program crashes after Update to iOS 4.2

After updating iPod Touch 4G to iOS4.2 the program "videos" just crashes.
Details: I can sync the iPod touch with the computer and the videos reappear on first launch of "videos". All videos play o.k. Second launch of "videos" gives me a white screen for several seconds, then "videos" crashes. Every time I launch it, it keeps crashing.
There are 2 conditions that make them reappear and "videos" runs normally (but only once!):
Method 1: Sync with my MacBook
Method 2: I fully close the program "Videos", then change language on the iPod touch to english (any other language seems to work, too. It's the change that seems to be important). Launching "videos" after that successfully shows all my videos. Second launch and the crash is back. Every time. Until I change the language again.
I tried full restore, and I tried Resetting the iPod, both with no success.
BTW: The Video Files are o.k., I can launch them using playlists and they work just fine.
This is really strange. Can anyone help?
Or, can anyone help how to revert back to iOS 4.1?

Check out the thread I have posted below. I've been having the same problem and have been posting on this thread.
Very annoying problem and it hasn't been solved in the new iOS 4.3 either!!
After two genius appointments, no solution has been offered from Apple, only a new device, which unfortunately came with iOS 4.2 installed, so I couldn't even leave it on the old iOS 3 and not update it. Although having said that, on this device the Video app was working, but only every other time. Weird I know! But now it won't work at all after the newest update... back to square one.
There are work arounds though, as mentioned in the above posts, if you change the music videos into films then they work perfectly.
Strange how it's only Music Vids that seem to cause this problem!?
COME ON APPLE....READ THESE THREADS AND FIX
http://discussions.apple.com/thread.jspa?threadID=2662550&tstart=0&messageID=129 80915#12980915

New Macbook video import problem.

Hi all,
I have just gone and bought myself a new Macbook Pro and I am very pleased with it. From a video standpoint I plan to use it to import and edit HD video from my Canon HV20. The new Macbook only has a Firewire 800 port and so the cable that I would normally use to connect computer and camcorder will not work as it is 'mini' Firewire to Firewire 400. I am assuming that there is/will be a 'mini' to FW800 cable available, but in the interim I am using a Firewire hub that is connected to the Macbook by a 400-800 cable. And herein lies my problem ! Although iMovie8 detects my HV20, it will not display or play or import any footage from the tape ! It just remains on the blue import screen and although the camcorder is merrily 'playing', no footage is actually making it across to the computer. I think the issue is the Firewire hub part of the connection but I thought it best to garner an opinion from users of this forum. Help !!
Many thanks in advance, kroguk
PS
I will also post this on the Macbook forum, so apologies if you see this post twice

Well, I can't find my Belkin FW800-to-4-pin (9-pin-to-4-pin) cable right now ..I'm doing some "tidying up" ..which is always hopeless for finding things afterwards!.. but I DID buy the other day - in the German Mac specialists, erm, can't remember the name - a Sonnet Fast-something (..which I've just put down, and now can't find..) teeny 9-pin-to-6-pin adapter (..so small that I can't find it!..) and I've just tested that with a Sony HC1 HDV camcorder.
Using the Sonnet adaptor..
..which is mentioned on their website at top-left here: http://www.sonnettech.com/product/adapters/index.html ..on a normal 6-pin-to-4-pin FireWire cable.. I just connected my camcorder and successfully imported HDV from the Sony.
I tested it twice with iMovie HD 6, in the most adverse conditions: 1; connecting to the 9-pin FW800 socket on a G4 17" laptop (..which is generally too slow to import HDV in real-time..) and 2; looped ("daisy-chained") through the 9-pin FW800 sockets (..one socket from the drive to my Mac, the other socket from the drive to the camcorder..) of an external iOmega FireWire drive connected to my Quad G5 Mac, also with iMovie HD 6. Both imports worked perfectly.
I'm also trying it as I write this - I just found the adapter again! - to import into iMovie '08 on the G5, daisy-chained through the external disc (..the G4 is too old or underpowered to run iMovie '08..) and that works as well ..though I did have to "kick" the program into starting a new Event; at first the camera transport ran, but no video imported, so I just Stopped and re-imported.
I bought this adaptor "on spec", as no previous device or adapter had worked properly for me (..converting between 4-pin on a camcorder and 9-pin on a Mac..) and this is the first to have worked, for me. But I have great faith in Sonnet, as they make the extra S-ATA driver card and other bits and bobs which I put in my floorstander G5, and that all "just works".
Ah; the shop where I bought it is ..hold on a moment.. the "m store" in Munich. (Karsten may know them: when Gravis moved from Lindwurmstrasse to Im Tal, the m store opened up right next door to where Gravis had been before) and they're at Lindwurmstrasse 5a, their phone number - they speak English, too - is 0049 89 24 22 35 24 and their website is ..aaaarggh; they don't seem to have one.
Anyway; the Sonnet SimplyFast FireWire 400-to-800 Adapter works perfectly - for me - on the end of a normal 4-pin-to-6-pin FireWire 400 cable, and importing works flawlessly every way I've tried it ..even daisy-chained through an external drive.
I can heartily recommend it.
But - as always - "your mileage may vary" ..meaning that it might not work so smoothly for you.

In Windows 8.1 Premiere Pro video imported clips shows up black screen in Source & Work space. Everything is updated on my PC.

In Windows 8.1 Premiere Pro video imported clips shows up black screen in Source & Work space. Everything is updated on my PC. They say it could have been a Windows update? Is anyone else having this problem and found a solution any suggestions.. Thank you.

Hello, thank you for your help. I finally was able to contact someone from Adobe on line.. It took about 1 hour on hold but I finally won the lotto...Lol. Pr.. /Project/Project Settings/General/ I had the (Mercury Playback Engine GPU Accelerated (CUDA) and not the (Mercury Playback Engine Software Only) It only took 1 second for Adobe to figure it out...Lol.
Although I have a high rated Nvidia card that did handle the software for some time after a hack, I believe a Windows update may have altered my Premiere Pro CS6 settings.
Video card is Geforce Nvidia GTX 765M non compatible with (Mercury Playback Engine GPU Accelerated (CUDA). Thank Ronin Edits and cvid01

I'm having trouble with video imported from my camera memory card.

I'm having trouble with video imported from my camera memory card.The video breaks up and pixelizes when it's directly imported from the memory card. That makes the video useless. Why does this happen? It doesn't do that in any other video editing software. Thanks for the help.

More info please:
Type of camera?
Was the card formatted in the camera doing the shooting?
Type of files the camera is set to record?
Al

Video import from PAL camcorder

I have just bought a Canopus ADVC110 which converts analog video to digital and have it hooked into my Powerbook Pro via a firewire lead.
I have my analog PAL camcorder tied into the canopus and am attempting to import some PAL video but not getting very far.
I fire up iMovie and it does indeed detect the camera but when I create a new project it appears as DV-NTSC and not DV-PAL. I have changed the 'New Project frame rate' preference from 29.97 to 25 but still no good. When I click on Import I get the video/audio but the video is VERY jumpy and in black and white and the audio is totally garbled. As the video is PAL and the project says DV-NTSC this might be the issue? I would have thought that the Canopus would remove any PAL/NTSC issues as it is being converted to digital anyway? I don't know how to change the new project from DV-NTSC to DV-PAL, again I thought switching frame rate to 25 would have done this?
So, can anyone help me get a smooth video import onto the Apple? I dont care what resulting file format is as long as I can import and play it. I don't mind buying a different video application if necessary and do have Toast Titanium if that helps.
Many thanks,

It sounds like you may not have set the dip switches of the Canopus correctly to PAL.
See page 16 of instruction manual for the canopus ADVC110!
(I use the same one)

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Macbook Video Importing Problem with Audio

I am trying to import videos to my macbook from my video camera in .mpg format (which i have done hundreds of times) and for some reason the audio will not play on the videos. The video imports fine except for no sound. I have no idea why this is doing this. It worked previously today but now it will not play any sound in the videos i import.

I am trying to import videos to my macbook from my video camera in .mpg format (which i have done hundreds of times) and for some reason the audio will not play on the videos. The video imports fine except for no sound. I have no idea why this is doing this. It worked previously today but now it will not play any sound in the videos i import.

New Photo/Video Import Lost Due to Power Cut - Any Ideas?

I am using OS X 10.9.1, and iPhoto '08, V7.1.5. My iMac was in the closing stages of a photo/video import from my iPhone 5 when a power cut occured. I had thought the photos would already be in the new album that I'd just created because I had just been asked the question Keep or Delete Original Photos (I responded DELETE). When I restarted after the power cut, the new iPhoto album contained nothing at all, and 80% of the originals had been deleted off my iPhone. I have tried looking in the main iPhoto library and Last Import folder with no joy. Is there anythig else that I can try please?

Quick update to say that I found them! I convinced myself that when the power cut occured, there's no way that a few GB of media could be instantly deleted, and thus they must be somewhere on the HD.......similar to data getting stored in a TEMP folder on a PC. I managed to access the main LIBRARY folder via Finder >> GO >> OPTION KEY and then did a search for one of the photo numbers that I knew was missing. Amazingly found it together with all the other 588 missing photos & movies buried in a folder called 26Dec2013_2 (strange considering this happened on 01Jan2014 and all the photos/media were from the period 27Dec to 01Jan). Note that my earlier search of the entire iPhoto Library package had also proved fruitless. Not sure where that folder was actually residing, but I copied the entire contents to my Desktop and then imported them into iPhoto. In short, I am so happy! Lesson learned about the dangers of power cuts, especially living in a city short on energy. I will not do that again. Hope this helps someone else sometime in the future. Thanks.

Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras

Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras & Firewire cables; source DV tape has no audfio static.

I forgot to write down my computer specs:
iMac 27 Mid 2011
2.7 GHz Intel Core i5
4 GB 1333 MHz DDR3
AMD Radeon HD 6770M 512 MB
OS X 10.9.2

Adobe flash video constantly crashes when starting to play

The flash player crashes every time I try to play a flash video in browser (vk videos as well as dailymotion and as well as youtube). Flash games are okay, though... Kongregate.com at the very least... At the same time google Chrome does not crash and plays video okay.
There're no crash reports for these crashes in about:crashes.
I tried downgrading flash to 10.3. I tried to update real player. I turned off hardware acceleration. Nothing helps! The video just crashes at the very first moment of playback.
PS: it all started recently. In august. There were no problems in July.

Same problem here. Every new Shockwave version has gotten worse. I'm beginning to wonder if there's compatibility issues with the other plug-ins and/or add-ons I use?
Is there a Mozilla or Firefox 'tool' that checks the compatibility of the plug-ins and add-ons?

Short Slo Mo video imported to Aperture or iPhoto via cable (Air Drop not supported on my iMac): only the SloMo section imports. Not the rest. Any fixes?

Short Slo Mo video imported to Aperture or iPhoto via cable (Air Drop not supported on my iMac): only the SloMo section imports. Not the rest. Any fixes?

Okay, as I'm working through this I see that I have to add the "Admin" account to each file with "read only" permission. Simply changing the "everyone" account access does nothing.
So how do I change the permissions settings in iPhoto or Aperture to give each exported file the desired permissions? I cannot locate a setting in the iPhoto or Aperture applications.
Also, I added a password to the user account. It did not change how files are output.

Video import crash

Similar Messages

Maybe you are looking for