Video Imports and Exports Too Small

I'm sure this is basic, but it only just started happening and I can't figure out the solution.
When I capture any video (HD or DV) it appears much smaller in the player window than it should. When I export, same thing.
The weird thing is, it worked fine for a long time, but then I started capturing video from my Flip Mino HD. Now, I'm back to capturing video off of my Canon XL2 (DV) and the video window is too small.
I cannot find any capture settings that set the dimmensions of the video. Can someone help?

I was looking at the capture settings and the export settings.
The shooting specs. will determine your Project/Sequence Preset. It might match one of the existing Presets, or need to be setup as Desktop (Custom), and all attributes need to match. Then, you will be Capturing the exact matched footage into a matched Sequence.
If you need to alter things on the output end, you can do that with your Export settings in AME, but to start, everything should match perfectly.
Good luck,
Hunt

Similar Messages

Confused about import and export formats

I have a load of 8mm video footage that I want to archive before the old camera dies. As a first step I have used my DVD/HDD recorder attached to my TV to save the footage from the camera, do a little bit of editing and then burn onto DVD at the highest quality available. Doing this I can get 60 mins of footage onto each DVD and the quality is a good as the original. I now want to play with a few of these by importing into iMovie 09 so that I can add a few titles and link clips together with a few transitions. Nothing too complicated. Here's where I get a bit lost with all the formats available to me for importing and exporting. What's the best way of doing this? Having read around a bit it looks like conversion to DV is good for getting into iMovie in the first place. To do this I have tried using MPEG Streamclip and it looks OK, but what about all of the settings options DV25, DVCPRO25, DVCPRO50, frame blending, downscaling etc etc no idea what any of this means. Then having added a few bits and pieces, what's the best way of saving it again to make sure that I keep the quality as high as possible - DV? Ultimately I'd like to have the edited movies back on DVDs with the footage quality the same as I started with i.e. no compression artefacts. If I save the final version in DV format I could then keep copies to view with Quicktime and then do I just use iDVD or MPEG Streamclip to convert to a format playable on a DVD player. Is there any guide somewhere as to what all of the different formats are for pro.s cons etc. Also confused as to why files get bigger and bigger e.g. a 20min clip on a DVD is about 1.5GB, but when converted to DV becomes almost 5GB. I can understand how compression makes files sizes smaller, but what's happening here??
Neil

A Quick Time .mov movie can play on any PC as log as they have the Quicktime player
free http://www.apple.com/quicktime/
To do it, open iMovie, pick you project, then "Share to Media Browser" and pick the "HD" setting. It can take hours/movie depending on their length. Once it is done you can find it inside the iMovie project's file. TO get there, go to Users Folder -> your User name folder -> Movies -> iMovie projects -> and find the project that you made the movie from. Right click on that file (or use the control key as you click on the file) and you will see a menu -> Show Package contents -> Movies and your 720p .mov movie will be in that Movie folder. you can drag it to your desktop and copy it to your external HD or flash drive.
roger

Nokia Photo Transfer for Mac - import and export y...

Hi, Nokia has published new Nokia Photo Transfer for Mac application, which allows importing and exporting photos and videos from Nokia Lumia with Windows Phone 8 smartphones to Mac.
- Importing photos and videos from your Nokia Lumia with Windows Phone 8, for example Nokia Lumia 1020, to your Mac
- Exporting photos and videos from Mac to your Nokia Lumia with Windows Phone 8
- Deleting photos and videos from the phone.
- Nokia Photo Transfer for Mac supports also full resolution photos taken with Nokia Lumia 1020; photos taken with Nokia Smart Cam and Nokia Smart Shoot applications; photos taken with Nokia Cinemagraph application.
You can download Nokia Photo Transfer for Mac from Nokia Photo Transfer for Mac web pages.
Nokia Photo Transfer for Mac supports Nokia Lumia smartphones with Windows Phone 8 operating system. Supported operating systems for Mac are Mac OS X 10.8 Mountain Lion and Mac OS X 10.7 Lion. You need to have compatible USB cable for your Nokia Lumia smartphone.
Let us hear what you think about the application. Nokia Photo Transfer for Mac informs you about new updates automatically.
Cheers, Samuli

Ultimateone wrote:
I believe that after the OS Mavericks came out that this app is NOT broken.
Not mentioned as compatible in this link: http://www.nokia.com/gb-en/support/product/nokia-photo-transfer-for-mac/ and no longer works upon Mavericks for me!
Happy to have helped forum in a small way with a Support Ratio = 37.0

IMovie importing and exporting slow as molasses!

I can not figure out why it takes SO long to import and export into iMovie.
I try to import quicktime files into iMovie in order to edit and it seems to take hours sometimes.
Then when I'm editing it's like everything moves static and it's just not smooth. Really annoying.
Then when I Finally am able to edit and I want to export it back into a quicktime a 5 minute project can sometimes take HOURS. There were times i left it to export overnight even and it was still going in the morn.
There has GOT to be something I'm doing wrong here. My projects turn out great once they are done but this time thing is a serious issue. Please can someone offer advice. I even bought an external and took movie files off my HD and off iMovie thinking that was the problem but still it seems to take really long. Are there settings or something i'm missing? I'm no tech guru so anyone who can help would...I would so appreciate it your patience and kindness.
Thanks so much!
Hil

A .mov file can contain .mp4 data or other form of compression. .mov is essentially a wrapper and doesn't in itself tell you what the type of actual compression being used might be. YOUR .mov files may well be H264 compressed video. You can convert these to any one of several other compressed formats and in doing so you can choose how much quality you wish to convert them to in most instances. You could take that original .mov file and convert it to ProRes 422HQ and get a huge uncompressed files or convert it to a smaller and more compressed form for viewing at a small size and higher compression. FCPX creates those uncompressed (less compressed) ProRes 422 files if you tell it to optimize your media. File size (literal pixels vs pixels ), amount of compression, data rate and type of compression all contribute to the eventual quality of the resulting file. I would strongly advise you to NOT dump the original files. In fact when you copy your data from your camera you should copy the ENTIRE folder and keep that as an archive. Larry Jordan has some good information on why that's important. If you downsample to a smaller form that uses less hard drive space an toss the originals you will NEVER be able to get back the full quality. It's like taking a RAW camera still shot and making a small jpg and then tossing the RAW footage. You can't get back data that you throw out. There is no free lunch. FCPx doesn't HAVE to copy from the external drive. You can control that in your preferences. I can promise you that if you toss the original footage in favor of saving some drive space, if that is good footage worth keeping, you will regret it later if you ever choose to reuse that footage and want the best possible image. Buy more hard drive space and get used to doing that cause it won't be the last time you have to buy more storage space.

Import and Export sections of material present in the Timeline

Hi,
I know it is possible with Premiere EL 11 to import and export titles.
I have an existing movie and am working on a new one. I wish to utilize part of what I created on the previous movie. Is it possible to copy part of the old movie and paste it into my new project being a different file? If yes, how to?
If not, then I start understanding why they sell EL for.
Thank you

If you wish to move the elements in the Timeline, separate, then you will need a ClipBoard Extender app., like ClipMate, to Copy the desired Clips, Titles, etc., then Open a different Project move the CTI (Current Time Indicator) to the desired location, and Paste. You cannot do that, without a Clipboard Extender.
If you are using the WAB (Work Area Bar) to Export/Share a portion of the Timeline, you will NOT get the separate elements, i.e. Clips, Titles, etc., but an AV file, with those written to the new, output file. Editing that output file will be tougher, as the elements are now all combined, and all Handles in Clips, etc., will not be included. If one goes that route, then MPEG would not be my choice, and I would go with one of the suggestions in this article: http://forums.adobe.com/message/4556586#4556586
Remember, with that output method, the Clips (Audio & Video) will NOT have any Handles, and Titles will be burned in.
From your comments, I think that you want the ClipMate (or similar) workflow.
Good luck,
Hunt

JCA IConnection call to BAPI with table in table as import and export param

Is it possible to call a BAPI with a table in table as import and export data?
Please give small code example if this is possible.
Thanks in advance.

Inner tables can be handled with:
IRecordSet innerTable = (IRecordSet)outerTable.getObject("INNER_TABLE");

Is it possible to make a video preview and export it from edge animate?

is it possible to make a video preview and export it from edge animate?

Hi Johan,
If you are looking to export video through Edge Animate.
Well, there is no direct way to do it but you could use a screen recorder to make an mp4. Then you can import the mp4 in PS and if you have the plugin for gif then you just save aa a gif.
Regards,
Devendra

How do I import and export PDF's from Ibooks

How do I import and export PDF files from Ibooks on the IMAC running Mavericks?
How do I sync my PDF files in IBooks to the IPAD when they were not purchased from the bookstore?
I noticed that I could email the PDF and then add it to IBOOKS on the IPAD.
Is there a 3rd party IBOOK type reader that will address this issue?
When I upgraded Mavericks it moved all of my PDF files in ITUNES application to IBOOKS and removed all reference to those
books in ITUNES. When I purchase a book from IBOOKS store on the IMAC, the books shows up in IBOOKS on the IPAD.
All of my PDF files will not sync up with the IPAD.
I do hope this is a problem that Apple will address and would like to know when the fix will be available.

Hello,
Thank you. I found that option you pointed out. I can now change it from 1080i to 1080p and I can chance the resolution. However I still can't change the frame rate. It still stays at 29.97.
Could this be due to the camera? I am using a Canon VIXIA HF S100 with 30p and 24p frame rate options. I suspect that it does not really shoot at true 24p and only does 24p within 60i.
Frankly, I don't really care about getting 24p support too much but it would be very nice to have the option.
I'll keep toying with the program. Still, anymore ideas or thoughts would be greatly appreciated.
Thank you Wild Giles.

Premiere CC support Closed Captions with mpeg2, mpg, ts import and export embedded

Using a side-car file is not an option. This question is about embedded closed caption files.
Will Adobe Premiere Creative Cloud support the import of closed captioned data from already captioned mpg, ts, mpeg2 video files, and will it support the export of mpg, ts, mpeg2 video with closed captions embedded? If they are adding this feature, do you know when? At least a rough estimate?
I create content that broadcasts ON DEMAND for major cable television providers and currently we are working with Mac Caption/ Caption Maker and Manzanita to individually caption each video. We need the ability to take the finalized captioned content and occasionally cut sections out and replace with other finalized captioned content. We wanted to do this without needing to RE-Caption every video after we export from Premiere, as that will add many additional hours of work per video.
Researching online I found that CC supports the import and export of embedded QuickTime closed captioned files. Our provider's standards are mpg/ts. One youtube video I found said that Adobe was adding mpeg2/ts support for closed captioning but I can not find any official word on the subject.
I appreciate any and all help/information on the subject.

Hi Waga Fox 5,
waga fox 5 wrote:
Is there somewhere that we can request this as a feature? We have not upgrade to 2014.1 yet, but it looks like that is still not a feature as you mentioned.
Yes, here you go: http://www.adobe.com/go/wish
Thanks,
Kevin

LR 5.6 keeps on crashing on even selecting adjustment brush and import and export, very flustrating considering i have just purchased a monthly contract, using both raw and jpeg files .

LR 5.6 keeps on crashing on even selecting adjustment brush and import and export, very flustrating considering i have just purchased a monthly contract, using both raw and jpeg files . please can anybody help , it runs incredibly slow too.

LR 5.6 keeps on crashing on even selecting adjustment brush and import and export, very flustrating considering i have just purchased a monthly contract, using both raw and jpeg files . please can anybody help , it runs incredibly slow too.

Importing and Exporting Data with a Clob datatype with HTML DB

I would like to know what to do and what to be aware of when Importing and Exporting data with a Clob Datatype with HTML DB?

Colin - what kind of import/export operation would that be, which pages are you referring to?
Scott

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

Problem with Import and Export Data Wizard

Downloaded and installed SQL Server Express 2008 R2 today because I want to explore how Access interacts with SQL Server (using my home computer). I'm using Access 2010 (under Windows 7), so the 2008 version of SQL Server Express seemed to be the version
to use.
After a couple of false starts, installation appeared to go okay. After the installation. My Start menu listed Microsoft SQL Server 2008 and Microsoft SQL Server 2008 R2. The latter listed Import and Export Data (64-bit). When I clicked that, the first Import
and Export Data Wizard page was displayed. I wasn't ready at that time to explore the wizard, so I closed it. An hour or so later I again attempted to open the Import and Export Data wizard. This time, the wizard didn't open. Instead this error message was
displayed: "The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered."
I found DTS.dll on my computer at C:\Program Files\Microsoft SQL Server\100\DTS\Binn, so the file is available, but don't know whether it is registered.
How can I correct this problem?

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

What is the best way to import and export footage from the 5D Mark II?

Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!

ascreenwriter wrote:
Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!
1. Follow the advice above. Also use the Media Browser to import the footage in case you have spanned media files. Import files with the Media Browser.
2. It largely depends on what you wish to ouput to: Blu-ray, web, etc. This FAQ gives the best answer: What are the best export settings?
3. Use the Replace with Adobe After Effects Composition function.

Looking for a program that can handel import and export of palm doc files

I am looking for a program that can handel the import and export of palm doc Files that can convert them to to either txt or RTF files for Vista 32, running Palm Desktop 7.1.
Could anyone give me a few suggestions of any plug-ins that would be good me?
Hearns
Post relates to: Palm IIIxe
This question was solved.
View Solution.

Ok, you need to clean uninstall Palm desktop 6.2. Install Palm desktop 4.1.4 and download and install documents to go version 6.
Here are the clean uninstall instructioins for Vista.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. Use the username that is on the handheld.

Video Imports and Exports Too Small

Similar Messages

Maybe you are looking for