Video iPod and 3rd Generation Docks

I have a 3rd Gen iPod and am considering a video ipod. Will my 3rd Gen. Docks work with it?
Thanks

Assuming all your songs are in iTunes, when you plug in your new iPod for the first time, it will transfer everything. There isn't a way to transfer directly from iPod to iPod, but it's not necessary anyway.
I believe all the accessories from the 3G iPod on which use the 30-pin plug are compatible with the 4G and 5G iPods and the nano. As stated above, the only hitch may be dock-style accessories where the newer, thinner iPods may not seat properly to make a connection.

Similar Messages

  • 5th generation iPod with 3rd generation dock connector?

    hello,
    I have a 30GB 3rd generation iPod, which is now a totally crammed... so I am planning on buying a new iPod Photo. With my 3rd generation iPod, a dock connector was included in the package. Will this dock connector work with the new iPod Photo, or do I need to buy one of those "Universal Docks"?
    I was looking in Apple Store, but couldn't find an answer there. Does anybody know?
    cheers,
    pj

    Hey,
    I just picked up my new 5g iPod and I am using it with the dock connector from my 4g with now problems. It sets the ipod at just the right angle to watch movies as well as charging, sync, etc.
    Rob

  • Can I sync info between 1st generation iPod and 3rd generation ipad?

    I am wondering if my older iPod calendar and my newer ipad can sync so I will have the same info on both?

    Use Icloud and it will work

  • Does the iPod nano 3rd Generation charge and sync in an iPhone 3G Dock?

    I wanna bye an iPhone 3G Dock. Now I have the question if I can connect my iPod nano 3rd Generation to the new dock for syncing and charging. On Apples homepage is the campatibility status set to only iPhone 3G, but I question this because older docks, like the one for the old iPod Photo works with other iPods as well.
    The dock connector on the iPhone 3G dock seems to be the same as the one on the charging cable and that cable has to be inserted in the dock. So why should it not work?
    I know I could bye the iPhone 3G cradle for the universal dock I already have, but I want to have the ability to make speakerphone conversations with the iPhone in the dock. That only works well with the original iPhone 3G dock.
    Can someone help me?

    Bit late on the old reply, but i'm using a different Apple Dock for my Nano. I have the Universal one,but it looked so big for the little Nano. I stumbled across an iPhone one by mistake, but only cost me £7 delivered, brand new.
    So in answer to your question, yes. And it enables me to get a skin on the iPod and still use the dock...

  • HT4972 I have an iPod touch 3rd generation with IOS 4.2.1 and the newest version of iTunes.  However, when I press "check for updates" it says that IOS 4.2.1 is the current version.  How do I update?

    I have an iPod touch 3rd generation with IOS 4.2.1 and the newest version of iTunes.  However, when I press "check for updates" it says that IOS 4.2.1 is the current version.  How do I update?

    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
    Identifying iPod models
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • Ipod touch 3rd generation is not charging in Bose Docking station. How to solve this problem ?

    My ipod touch 3rd generation is not charging in the Bose Docking station (manufactured 2005). How to solve this problem ? SOftware required or hardware adapter required ? Thanx

    - Is the iPod fully seated in the dock?
    - Does Bose say the dock is compatible with your model iPod and it iOS.
    - Did it every work?
    - Some users have reported that their iPod did not fully work with their dock after updating the iOS on the iPod.
    There or no setting for docks.

  • Hi, Just wondering whether the iPod Classic 3rd generation is compatible with current iPod docks. Thanks

    Hi,
    Just wondering whether the iPod Classic 3rd generation is compatible with any of the current iPod docks.
    Thanks for the help.

    Hey anster101,
    Great question, and welcome to Apple Support Communities.
    The following article outlines the compatibility of the Apple Universal Dock:
    Learn about Apple Universal Dock
    http://support.apple.com/kb/HT1380
    Thanks,
    Matt M.

  • I still have my iPod Nano 3rd generation, but my old computer crashed and I did not have itunes backed up, so I lost my library. Is there a way to get the songs from my old ipod to new computer library and then on to the new ipod?

    I still have my iPod nano 3rd generation, but my old computer crashed and I did not have itunes backed up. Is there a way to get the music from ipod to new computer library and then on to the new ipod ?

    Save all the photos from your Droid into a folder on your computer.
    Connect your device to your computer. On iTunes left Pane, select iPhone under 'Devices'; then on the right Pane, select PHOTO tab.  Make sure Sync Photo box is checked, and "from" box selected the folder that has Droid's photos.  Then click the SYNC or APPLY button on the lower right window.

  • The hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    the hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    it might be a malfunction in your device. you might ave to send it to repairation
    1.ave you try resetting it or restoring it?
    2. did your hold boutons whas working beffor?

  • The backlight on my ipod touch 3rd generation will not come on, but everything works perfectly. I even used the advice given on the tech support page, and it still will not come on. HELP ME PLEASE.

    The backlight on my ipod touch 3rd generation will not come on, but everything else is working fine I even took the tech support advice by plugging it in and resetting it, but that didn't fix the issue either. I need help.

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    Also heating sometimes works. See:
    Why can't I select my wifi settings?
    A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • IPod Touch 3rd generation is not turning on and gets really hot when I plug it in but is not charging...

    I have an iPod Touch 3rd generation and yesterday I was using it and noticed that it reset to a different time zone and when I dug a little deeper realized that it reset the date to December of 1969. I just went in and changed it all back. I was out of the house all day today and didn't take it with me, when I went to use it, it wouldn't turn on. I assumed it was dead, so I plugged it in and got ready for bed. I realized that the charging screen never appeared and it never made the little noise it does when you plug it in. I picked it up and right near where the charger plugs in, it was very hot. I use it when it'd plugged in from time to time and it is NEVER that hot. I then tried to plug it into the computer where it again didn't do anything and didn't show up as a device that was plugged in on my iTunes. Again, it got very hot very quickly. I am using the cord that came with it and an actual Apple brand wall charger. I don't know what else to do. Some people said to hold the two buttons down for a little bit, but nothing happened on mine. Please help!

    Warm is normal, too hot to handle, literally, is not.
    If you're concerned, make an appointment at your local apple store and have them check your charger out.

  • Ipod touch 3rd generation will connect to my wifi for a few seconds and then nothing will load. help please?

    I have an ipod touch 3rd generation 64gb and it has iOS 5.1.1 and it will connect to my WiFi for a few seconds and then nothing will load. It says I have full connection bbut nothing works. I have 2nd generation ipod and it connects fine. Along with my laptop and xbox 360. I have tried downgrading it and restoring it from itunes. I also tried forgetting the network and inputting it myself but it sti does the same thing. I even tried resetting my wireless modem but it still didnt make a change. I really could use some help. I can't call apple cause im no longer under warranty.

    Reset the iPod and connect to its syncing computer.  It it shows in iTunes restore the iPod.
    Next see if placing the iPod in recovery mod will allow iTunes t see the iPod so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • The lock and volume button's no longer work on my iPod Touch 3rd Generation?

    I've had my iPod Touch 3rd generation for about two years now, and have had hardly any problems with it... but now the lock button on the top of the ipod and the volume control button on the side of my ipod no longer work. Because the lock button won't work, I cannot reset my iPod. What can I do to fix this?

    Assuming that this is not a hardware problem have you tried restoring your iPod? If that does not work then the only thing may be to take it in for repair.

  • 1 iPod Nano 3rd generation and 2 user accounts on Mac Mini

    My husband and I share our Mac Mini and we log in under separate user
    names. He is the administrator for the computer. My problem started
    when I initially purchased Phase and I could not upload it to my
    iPod Nano 3rd generation. So in an effort to demonstrate the problem I had my husband log
    in to the Mac Mini under his user name and then logged into the
    iTunes store using my account information and bought Scrabble. He was
    able to upload Phase to the iPod but then when I logged into my user
    name on the Mac Mini and went to the iTunes store I could only see
    Scrabble (not Phase) and in order to download it I was forced to sync
    my Games on the iPod which overwrote the Phase game. So now I only
    have Scrabble on my iPod and I can't see Phase in my iTunes account.
    How do I remedy this?

    Hello HernanOtt,
    Depends on where you have it serviced.  Here are Apple's repair quotes.
    http://www.apple.com/support/ipod/service/prices/
    You would probably save a lot of money by having a 3rd party repair company do the job for you instead.  Just do a simple Google search for iPod repair and you'll get a plethora of results.
    B-rock

  • TS3716 I have an iPod nano (3rd generation). I've recently dowloaded iCloud. So now when I open iTunes the window is entirely different. And I don't have the previous menu options. I have downloaded audiobooks for years. Is it not supported by iOS5?

    I have an iPod nano (3rd generation). I've recently dowloaded iCloud. So now when I open iTunes the window is entirely different. And I don't have the previous menu options. I have downloaded audiobooks for years. Is it not supported by iOS5?
    Can I revert back to a previous version? Or must I upgrade to a newer device? Thank you for you expertise!!

    I have an iPod nano (3rd generation). I've recently dowloaded iCloud. So now when I open iTunes the window is entirely different. And I don't have the previous menu options. I have downloaded audiobooks for years. Is it not supported by iOS5?
    Can I revert back to a previous version? Or must I upgrade to a newer device? Thank you for you expertise!!

Maybe you are looking for

  • Time Machine won't automatically back up

    A little while ago I had a problem with my audio plug ins preventing some of my music programs functioning properly. I couldn't trace the exact file in the library so decided to overwrite my library with a previous version from my time machine disk.

  • Office 2007 Long loading and saving times

    I have a small network with a PC unit running windows 7 HP acting as a fileserver with an attached external hard drive being the primary storage location. It is mapped to about 8 PC's all running windows 7 HP with MS Office enterprise 2007 The users

  • Creation of XML dynamically helppppppppppppp

    hello all i had developed an application in java .corresponding to that i want to create xml that take its value of attributes dynamically Can anybody help me out how to proceed to this problem thanks in advance bye

  • Change default offset in signal calculatio​n step

    Hi All, I'm using LabVIEW SE 2012 on win7.  Is there a way to set DC Signal offset to be equal to the sum of another signal inputs offset plus a constant value (from a text or other?)    I want to be able to change the DC signal offset of one signal

  • Lion server 10.7.4 + Mail server + SSL

    Hi, since some weeks I'm responsible for a Mac OSX Lion 10.7.4 server. Enalbed services are calendar, addressbook and mail server. We try to use our server at a third party portal to send and recieve emails. But the problem is, when we try to configu