Video ipod data became corrupt and now wont do anything

my video ipod 30G said it was corrupted one day which made me angry so i reset it to the factory settings took like 10 minutes to reset and now it doesnnt show up in itunes. it shows up in mycomputer but when i try to access it it just freezes up.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
  Apple Retail Store - Genius Bar

Similar Messages

  • I was on the facebook app last night and my ipod closed the app and now wont turn on or do anything even when plug into my laptop :/ help anyone

    I was on the facebook app last night and my ipod closed the app and now wont turn on or do anything even when plug into my laptop :/ help anyone

    Try here:
    iPod touch: Hardware troubleshooting

  • I have a generation 3 ipod 80 gig.  When I updated itunes to 11.1.11 and tried to sync the ipod it erased it and now wont recognize it.  I can't seem to make this work  I have reset the ipod, reloaded itunes all to no effect.  Any ideas?

    I have a generation 3 ipod 80 gig.  When I updated itunes to 11.1.11 and tried to sync the ipod it erased it and now wont recognize it.  I can't seem to make this work  I have reset the ipod, reloaded itunes all to no effect.  Any ideas?

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Ipod touch shut down and now wont turn on, not even when plugged to the computer

    ipod touch shut down and now wont turn on, not even when plugged to the computer what can i do

    If you get an network timed out error, try disabling the security software on your computer.

  • My ipod is stuck in recovery mode and now wont do anything

    I've got my ipod in recovery mode and its stuck it just says waiting for ipod!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • TS1363 itunes will not update on my computer and now wont detect my ipod. it says i have to contact an addministrator. what do i do?

    itunes will not update on my computer and now wont detect my ipod. it says i have to contact an addministrator. what do i do?

    Hi enp518,
    Welcome to Apple Support Communities.
    We have some information in this article that may be helpful:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    To install iTunes or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator account access, you may find this Microsoft article helpful:
    Windows 7: How do I log on as an administrator?
    Otherwise, refer to the Help documentation from Microsoft, contact your IT department, or visit support.microsoft.com for more information.
    Best,
    Jeremy

  • I connected my ipod before installing softwear and now it wont work

    i connected my ipod before installing softwear and now it wont work...like abosolutely nothing...its frozen

    First of all, try resetting the iPod. It may take several attempts and is best done connected power.
    Then download the iPod Updater, install this to your computer, restart the computer, run the Updater, then connect your iPod when prompted (not before), then follow the set up procedure.

  • My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

    My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

    Shootist007 wrote:
    If the system won't boot from the new drive the OP bought and install OS X on it it certainly won't boot from the original drives Recovery HD partition.
    Sorry genius.....but if the Recovery disk shows up that means the disk cable isn't bad.  Could be he did have a screwed up HDD and when he put the NEW HDD in (after putting the OS on it via USB) the computer didn't reconize it and therefore didn't boot the OS.  Just maybe right genius?  Don't rush to criticize someone's recommendations until you realize other possibilities.  (I did say "if it does")
    Thank you

  • Record about my phone (bought in Verizon store and connected to Verizon for 4 years) has been corrupted and now I can not make any changes to my data plan. Several sessions with the technical support and management have not resolved this issue. Each time

    Record about my phone (bought in Verizon store and connected to Verizon for 4 years) has been corrupted and now I can not make any changes to my data plan. Several sessions with the technical support and management have not resolved this issue. Each time technical people and top managers promised that this issue will be resolve tomorrow and they will cal me. Nothing happend!! I can not even cancel my service not just to upgrade it. Completely locked. 
    Any advice?
    Thanks.
    Alex.

    Cannot figure out what your talking about since it makes no sense.
    If you are the account owner you can go to the My Verizon web portal http://www.verizonwireless.com
    You must log in with your cell number and your my Verizon portal password. Not the account pin.
    Once there you can change your plan and services. However repeated incorrect login attempts will lock you out of the site. It a fraud prevention measure.
    1-800-922-0204 call support with your cell number and or account number and account pin and they can assist you.
    If you don't have the information then there is nothing they can do.
    If you can verify who you are they may be able to reset your account access. But only if you are the account owner.
    Good Luck

  • My ipod touch shut off and now it wont turn back on, how do i fix that?

    my ipod touch shut off and now it wont turn back on, how do i fix that?

    Hey lattifahfromny,
    Thanks for the question. Based on the information you have provided, the following resource may assist you:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    1. Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thanks,
    Matt M.

  • My ipod touch 32g turned off on its own and now wont turn on or connect to itunes

    my ipod touch 32g turned off on its own and now wont turn on or connect to itunes

    Start here.
    iPod touch: Hardware troubleshooting

  • I updated my ipod 2 1.2 and now i cant c ma songs list just my ipod pic

    this is really ******* me off iv been tryna do this 4 a week and still nuthing i updated my itunes and my ipod 2 1.2software and now when i connect my ipod to itunes all that comes up is a pic of my ipod video and thats it i cant play my songs and i cant put it to normal im gona break it soon if i cant do it sum can u help me plz

    That happens sometimes.
    An "other" that large usually indicates that the "other" included corrupted files.  Usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
    To restore from backup see:
    iOS: How to back up
    To restore to factory settings/new iPod see:
    iTunes: Backing up, updating, and restoring iOS software

  • My daughter register her ipod with my account and now all my contacts are gone?

    my daughter register her ipod with my account and now all my contacts are gone and I have her contacts in my iphone I need my contacts back!!

    If you are sharing the same iCloud account your data will be merged.  Then if she deleted your contacts from her device, they would have been deleted from yours too.
    The first thing to do is migrate your daughter's iPod to her own iCloud account (you can continue to share the same iTunes ID; it does not need to be the same as the ID you use for iCloud).  To do this, start by saving any photo stream photos she wants to keep to her camera roll (unless already there) by opening her my photo stream album, tapping Select, tap the photos, tap the share icon (box with upward pointing arrow), then tap Save to Camera Roll. Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud), choose Keep on My iDevice and provide the password to turn off Find My iPhone.  Then sign back in with a different Apple ID to create her new account and choose Merge to upload your data.
    Once she is on her own account, you may be able to recover your contacts from your iCloud backup by following these steps: https://discussions.apple.com/docs/DOC-4841.

  • My i phone 4s, battery died and now wont come back on just vibrates on charge but will not come on, have tried rebooting i just want to be able to access the memory to back up the phone to icloud  as i stupidly have not done this yet is this still possibl

    My i phone 4s battery dies and now wont switch back on, when plugged into the charger it just vibrates and sometimes beeps, but the screen will not come on? i have tried rebooting it but it still wont work, i just need to be able to access the memory so i can save all my stuff to icloud as i stupidly havent done this yet, is there anyway this can be done?

    Hey tessatony,
    Thanks for the question. I understand that your iPhone 4s is not functioning properly, and that you wish to try to make a backup before troubleshooting. From the information you have provided, it sounds like the device is indeed turning on and responding when plugged in, however the display is not lighting up. Have you attempted to plug the iPhone into a computer with iTunes? If iTunes recognizes the phone, you can attempt to back it up:
    iTunes: About iOS backups
    http://support.apple.com/kb/ht4946
    Afterwards, attempt to restart and/or reset the phone:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If your issue persists, your iPhone may need to be serviced. The following link should help you get started with the process. Included, you will find information on topics such as warranty, service pricing, and express replacement service.
    Apple - Support - Service Answer Center
    http://www.apple.com/support/iphone/service/faq/
    Thanks,
    Matt M.

  • Safari 4.1 started crashing and now wont load at all...

    Hi ..please help! Safari started crashing last night ('The Application quit unexpectedly....') and now wont start up again after a variety of attempts; just keep getting that message repeatedly. I have:
    - repaired permissions and restarted
    - deleted icon from dock then deleted app from folder then re installed Safari 4.1 for Tiger
    - moved safari plist from Preferences to desktop
    - emptied Safari cache folder
    But it just keeps on trying to start up and giving me the crash window.
    The crash log reads:
    Date/Time: 2010-07-10 12:37:59.975 +0100
    OS Version: 10.4.11 (Build 8S165)
    Report Version: 4
    Command: Safari
    Path: /Applications/Safari.app/Contents/MacOS/Safari
    Parent: WindowServer [70]
    Version: 4.1 (4533.16)
    Build Version: 2
    Project Name: WebBrowser
    Source Version: 75331600
    PID: 265
    Thread: Unknown
    Link (dyld) error:
    image not found /System/Library/Frameworks/Security.framework/Security
    Model: PowerBook5,6, BootROM 4.9.1f1, 1 processors, PowerPC G4 (1.2), 1.67 GHz, 1 GB
    Graphics: ATI Mobility Radeon 9700, ATY,RV360M11, AGP, 64 MB
    Memory Module: SODIMM1/J25UPPER, 1 GB, DDR SDRAM, PC2700U-25330
    AirPort: AirPort Extreme, 405.1 (3.90.34.0.p18)
    Modem: Jump, V.92, Version 1.0
    Bluetooth: Version 1.9.5f4, 2 service, 0 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    PCI Card: TXN,PCIXXXX-00, cardbus, PC Card
    Parallel ATA Device: MATSHITADVD-R UJ-845E
    Parallel ATA Device: FUJITSU MHT2080AH, 74.53 GB
    USB Device: Bluetooth USB Host Controller, Apple, Inc., Up to 12 Mb/sec, 500 mA
    USB Device: Apple Internal Keyboard/Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
    Im running a Powerbook 1.67 OS10.4.11. Never had any problems with Safari before.
    Any help very gratefully received!! (Really hate Firefox, its so slooooooow...come back Safari please...)
    Thanks
    KFB

    Hi KB
    that is indeed the whole report - & the pertinent line is, as ~Bee said
    image not found /System/Library/Frameworks/Security.framework/Security
    What this means is - Safari tries to load another piece of software, and can't - either because it's missing or damaged somehow.
    you didn't attempt to remove anything manually whilst trying to get Safari re-loaded... ?
    If not, I do suggest you use Disk Utility while booted from your install disk to Verify the HD, and then startup normally & repair disk permissions from Disk Utility found in Applications/Utilities/
    If that all seems fine, obviously you need to get that file replaced, and hope that it's the only one missing/mangled ( often does seem to be the case )
    Either archive/install Tiger, followed by all necessary software updates
    or
    Hope that it's part of the 10.4.11 combo - http://support.apple.com/kb/DL170 assuming that the file doesn't stop Installer from running.
    or
    bring /System/Library/Frameworks/Security.framework over from another mac running the same OS version, place it exactly where it should be, and hope that it's the only thing missing/mangled ( often does seem to be the case )
    I don't know if it's part of the 10.4.11 combo, haven't a copy to hand. Also, there might have been other reasons, (and a whole different report), why Safari first started crashing. So you may find the archive/install less trouble overall.

Maybe you are looking for

  • Should I have concerns about the integrity of Best Buy's Mac sales?

      I bought my iMac OS X, Early 2008 Model from a Best Buy store. I was a naive & pensive 1st time [ever] PC buyer. The sales [kid] led me to an iMac that had been returned, and referred to it as an "open box sale." I was re-assured the Mac had been c

  • Mail authentication problem - PLEASE HELP

    I was trying to set up my email account on my new Droid phone. Apparently, it requires that the incoming mail server use authentication. I went into my Mac Mail account settings and changed the Advanced setting to Password. Now I can't receive any ma

  • Approve/Post Journal works in 32-bit, but not the web Client?

    We have HFM 4.01 sp2 and sometimes when a user tries to approve/post a journal in the HFM Web Client they receive a security error (even though they have the post role and ALL access to the Entity), then they login to the 32-bit client and they can a

  • Song wont play and just jumped to next song automatically

    Hi guys, Im using MacBook Pro OS X 10.9.2, iTunes 11.1.5(5) and iPhone 4S Actually, i added my musics on iTunes library and all of them play properly in iPhone but when im going to play a specific one it wont play and automatically jumped to next tra

  • Copied examples of many javabeans sample programs but none works for me :(

    y is it that my javabeans in jsp always don't works always say blah.class not found... <jsp:useBean id="user" class="UserData" Scope="session"> Do i need to do anything to the "UserData" class first? public class UserData { String username; String em