Video is Digital like motion after I reversed the video??

Video is Digital like motion after I reversed the video image? Any solutions. Thanks

The you tube app isles entry optimized for the iPhone. When you use it on your ipad stuff is scaled up and looks fuzzy.
I suggest trying a different app like Jasmine to view YouTube videos on your iPad.

Similar Messages

Do i need to reinstall programs and applications like FCP after upgrading to the new Lion OS?

Do i need to reinstall programs and applications like FCP after upgrading to the new Lion OS?

I've installed Lion over Snow Leopard and all my non Apple software is still here - you may want to check if your software will work with Lion and I would definately recommend having a bootable backup in case anything goes wrong
Regards,
Colin R.

Satelite A500-ST5606 Digital Signiture Errors after restoring from the Recovery Disks.

I had to replace my hard drive, I reinstalled Windows 7 Home Premium (64bit) from my recovery disks. I get a digital signiture error the following drivers:
Display Adapters
IDE ATA/ATAPI controllers
Network Adapters
Sound drivers.
Also unable to update windows using windows update, I get service is not running with it.
Please advice.
Thanks

Satellite A500-ST5606
A known problem. See my message about that.
After Restoring to New Hard Disk, No Windows Update
You may need to repeat the restore and then immediately install the new storage driver.
-Jerry

[Solved] Midnight Commander, no lynx-like motion available

I just installed Arch on a laptop yesterday and it went quite well considering this is my first brush with this distribution.
I found the Midnight Commander package included in Arch to be lacking a feature I really use, and that is the setting for "lynx-like" motion which allows using the left and right arrow keys to navigate into and out of directories. Considering that the version of the mc package is rather recent, this is a bit surprising as this feature has been available for many years. Is this just a quirk of how the Arch maintainer built the package or is it something else? I find mc much less user friendly without this feature.
Thanks!
Last edited by Nate_KS (2011-01-04 21:20:57)

Indeed it is in the panel options menu. I thought I looked there.
Thanks much!

I'm using a Canon HV20 video camera that uses digital tape. After importing to my Events Library in Final Cut X, there are some timecode breaks between clips resulting also in gaps between the clips. Is there a way to avoid this?

I'm using a Canon HV20 video camera that uses digital tape. After importing to my Events Library in Final Cut X, there are some timecode breaks between clips resulting also in gaps between the clips. Is there a way to avoid this?

Thanks Russ. I'm a beginner but Lynda.com has a video on making an archive, so I'll follow her video to try this method.

Who is the best app for video effects ?, some one like adobe after effects ? Thank u for ur help.

Who is the best app for video effects ? Some one like adobe after effects ?

Tweakers Page - What video card to use?

Digital Signatures/Javascript After Signing?

Hello everyone,
I'm currently developing forms for my company, post processed through Adobe Acrobat 9 Standard, that require digital signatures. Working in the food industry requires compliance to specific FDA guidelines, specifically CFR 21 part 11. In order to meet the requirements I must develop an SOP (Standard Operating Procedure) that proves signatures are accurate and secure.
The process is tedious, and I have called a few meetings thus far to discuss some of the unforseen circumstances. During the discussion a question was brought up stating; What protects forms stored in the archives (3 years for compliance) from being corrupted by a disgruntled employee? Specifically, what stops an employee from clearing a digital signature? I realize we can set up file access rights to the forms to prevent such happenings, but majority of the forms are setup to hold 6 months to a year of info, thus wouldn't be archived until filled completely.
My question: Does anyone out there know of a javascript or trick to disable the "Clear Signature" function after signed? I've been searching and have turned up empty handed. Also, does anyone have any other javascripts that are used after digital signature occurs?
Thanks in advance for any help you can give me,

George,
Thanks for your response.
The issue is not if the file is deleted, the issue is if the files becomes "manipulated". I think "corrupted" was the wrong choice of words.
To explain: Any form that is completed has several digital signatures within the contents, depending on which QA Technicians complete the task (e.g. Calibrations, Metal Detector Settings, etc...). Forms are setup by days, weeks, or in some cases years, and have designated signature areas for the time period the test was conducted. So, after "John Smith" completes his portion of the form he is required to digital sign the document, after signing is complete all information is set to read only and cannot be altered unless the signature is deleted.
Digital signatures can be deleted in two ways:
1. The user who signed the document, based on active directory, has the ability to "clear signature". As and FYI: no other user is capable of deleting a signature signed by another employee. (does not apply to the form author)
2. The file creator can add a "Reset button" control, thus being able to delete any data specified.
So as I said I'm looking for a way to lock all signature functions, after sign is completed, even for the original signer. So if form "Calibration01" is currently being filled out and has signatures x,y,and z on it; I want to make sure if "x" is disgruntled they do not maliciously go and clear their signature. Also, I would like all fields associated with the signature to be locked without any way for the user to manipulate or revise data.
If anyone has any javascripts that run once signer digitally signs, it would be a great help,
Thanks,

User Manual FCP X pdf_format (like Motion 5)

Exist an HELP document for FCP X in pdf-format like Motion 5?

Yes, try here:
http://manuals.info.apple.com/en_US/final_cut_pro_x_user_guide.pdf
There are also plenty of good video tutorials online, for example Izzy's.

Weird "click" motion after keyframed filter

So I've got some text that flies onto the screen, left to right. I put a defocus filter onto the text, and then used the record button so that the defocus filter's amount goes from 10-0 over time... giving the effect that it comes into focus. Only thing is that after the last frame where the filter is applied, it seems like the text kind of "clicks" into place. It does this IN motion, so it's not an export issue. I was thinking maybe I could just put a stop behavior on the last frame that has the filter on it, but I can't figure out how to use the stop behavior, or even how to find it. (i checked the manual, but it didn't help.) Any suggestions?

hi,
As far as I'm aware you can't use the stop behaviour as this is to stop the action of other behaviours. You have keyframed the refocusing so it wouldn't apply.
It occurred to me that this artefact could occur of your keyframes are too close together. If you ramp from a high defocus to 0 in a very short period of time motion has to interpolate the value from frame to frame. it could be that in the last two frames the defocus value is a big step, giving you the jump or click. Try using a lower value to defocus from, and /or put a tiny fade up at the beginning as well. The eye will be fooled into thinking its only defocusing up.
Hope this helps
regards
adam
moojoose ltd

When I use Photoshop CS 6 to edit video, I don't know how to change video speed after I converted the clip to smart object?

When I use Photoshop CS 6 to edit video, I don't know how to change video speed after I converted the clip to smart object? The clip color turns purple and it only allows me to add motion but not change the clip duration and speed anymore.

Thanks for the reply and as a work around method I used the Photoshop to do all the adjustments then export the video to iMovie to finish the final cut. I also have a problem to paint or clone on a blank video layer created in Photoshop. It tells me the time is beyond the target frame time, I don't understand the message. Can you explain to me what did I do wrong? Thanks a lot!
John Wang
801-3618742
[email protected]
http://johnwanggallery.shutterfly.com

"Interlaced-like" motion artifacts when exporting

I am using CS4.
I rendered using the YouTubeWidescreen HD preset.
My original footage is from a FlipHD camera (H.264) and a JVC Piscio GC-FM2.
My intention was just to make some cuts to the in and out points, but otherwise not alter the orginal footage.
Two questions:
1. I have the right sequence settings (Sony XDCAM-X 720p), so that the FlipHD Camera footage comes into the timeline with any redline (or yellow line.) So, Premiere doesn't have to re-render the foogage to display it. But when I export the footage, it seems to (slowly) re-render everything. Back in the days of DV SD, I could (quickly) export DV footage without Premiere re-rendering it at all. Is there any way to do this with HD footage?
2. I am getting some sort of motion artifacts with the exported file. Looks a lot like interlacing to me. But the cameras shoot in progressive mode as far as I know.
The first photo is a screenshot of the original footage.
The second photo is a screenshot of the export video file.
The person on the left is spinning around.
In the original footage, each frame is without any motion artifact even though the person is moving quickly.
How do I fix this?

It turns out the JVC camera is at 59.94fps, not at 30fps that I had my sequence set to.
So, when I changed the sequence settings and export settings to match that, it fixed it!
Also, turning off frame blending also fixed it.
Is there any way to get Premiere to just export the original video without re-rendering/re-compressing?
This is way the way it worked with SD DV. If you didn't add any titles or any other effects, it would just export the original file (fast).
It seems I am losing some quality no matter how I export it.

I want to make a video for indian digital theater. Plz tell me the format.

I want to make a video for indian digital theater. Plz tell me the format, resolution and other settings i shoud use for the same. I am an amateur so please provide a very clear solution.

...indian digital theater...
Like this?
What happened to 'Ultra HD"?
http://forums.adobe.com/thread/1215507?tstart=0

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

Hello SamSax
Check out the assist page below for troubleshooting call connectivity.
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HT1454 why i can not get video out from my ipod touch after i did the upgrade

why i can not get video out from my ipod touch after i did the upgrade

why i can not get video out from my ipod touch after i did the upgrade

Invoice is not coming in open status even after reversing the payment docum

Hi,
I have posted an invoice Through Transaction code FBA7(Post vendor down payment) for an amount of 2500. After that i made payment of 2500 through F110.
Now the status in FBL1N is that invoice document is showing as cleared and payment document which generated through F110 is open status.
I want to reverse the payment document inorder to keep that invoice in open status. I reversed that through FB08. But still that invoice is shoiwng in cleared status.
Requesting you to please provide me valuable suggestion on this.
Points will be awarded.
Regards,
Shree

Hi Sudheer,
I am trying the steps as you suggested i.e reversing and resetting. But it is giving the following error.
Use the transaction for resetting check payments
Message no. FS642
Diagnosis
When resetting a check payment, you must specify a void reason code.
Procedure
Use the transaction defined for resetting a check payment.
Information about the check concerned is stored in company code 5454, house bank SIGCO, account MEON under check number 0000000918388.
Proceed
Now when i am proceeding, it is taking me to T.code FCH8.
Regards,
Shree.

Video is Digital like motion after I reversed the video??

Similar Messages

Maybe you are looking for