Video is not playing in preview window

In the preview pane the movie is not visible. I can press the play button, every thing runs normal inclus. sound but i cannot see the movie.
If i click in the preview pane then the current frame appears. But no running movie...
When i start PRE9, i get the message "We have detected an incompatible display driver. To get better and faster playback performance, please update your display driver.  Display driver details :   NVIDIA Geforce 7650 GS/PCI/SSE22.1.2".
I tried to download a driver from the NVIDIA site but i seem to have the latest driver...
Who can help ?
Kr,
Luc

The "points" are little "awards" for those, who furnish "the correct answer," and then there are two for "helpful answers."
If Steve's suggestions solve your issues, then he gets the "big-10."
Good luck,
Hunt

Similar Messages

  • Video does not play in preview window.

    I have recently upgraded to CS4 from CS3.
    In any part of CS4 that uses video; Encore, Premeire and After Effects, video will not play in the preview window from a timeline when the play button is pressed. The playhead doesn't move, but the Play button toggles from Pause to Play when pressed.  However, when I scrub the video, I can see it in the window.  Video played fine in CS3.
    My graphics card is a PNY nVidia Quadro FX 570 with the 178.26 driver.  My computer is a Dell Precision 670.
    I recently completed a project where I had to trim about 48 QuickTime video files created in Premiere 2.0, compressed with Sorensen 3.
    The files were then added to Encore, and a DVD was created.  The DVD worked fine.  At no time could I preview video, unless I opened the edited video in QuickTime.
    This has also happened with still and AVIs.
    At no time do any of the CS4 programs freeze or crash the system.
    Has anyone had this happen to them.  Is it a graphics card issue.... I can't seem to find any info on a similar problem.
    Thanks.
    sSix

    Try turning off (or lowering) Hardware Acceleration for your graphics card.
    At the Windows Desktop, Right Click and select "Properties".  Under the "Settings" Tab, select "Advanced".  Select the "Troubleshoot" Tab and reduce the Hardware Acceleration.  You will need to restart you computer to see if it worked.  First, try it with no Acceleration.  If it works, try increasing the Hardwar Accelearation one notch at a time - rebooting your computer each time.  \
    I obtained this procedure from the Adobe Technical Staff.
    rmv1414

  • IMovie, some photos on timeline will not play in preview window

    There are a bunch of photos on the timeline that will not play in preview window.
    I've tried all the tricks that were suggested in other posts. (moving photo to the desktop and then reimporting, etc)
    several hours have been lost on this problem.
    IOS 10.7.5
    iMovie '11    rev. 9.0.9

    I think it's a bug. It happens to me as well. You have to switch between windows, refreshing it. 

  • Just started CS5.5 but video does not play in preview

    I just got a brand new (to me) Panasonic AC130P Camera for my work / office and recorded some simple test shots.
    All of the videos were shot in MTS format / AVCHD 1920 x 1080 (1.0).
    When I put them in my bin then click on it, the small preview box on the top does not move and only audio comes through. When I click and drag it to the preview box, it only plays audio. I have messed around with the output icon to see if I can get something but all I can get are the waveforms etc to work, not the actual video I shot.
    I'm maybe considred old scool (Worked with a lot of DV, SVHS, etc but never digital HD, this is my first time) so a lot of the HD settings are really new to me. Am I missing something here?
    I have a feeling that it has to do with the video / graphics card but has anyone else experienced this before? Any advice would be helpful. Thank you!

    Thanks for the reply! I did watch that video however, doesn't solve my issue of playback or preview.
    I don't have issues with the sequence rather, I have an issue of the video showing up at all in Premiere. I don't see it in the preview or sequence monitors however I hear audio and the other output devices can read the RGB frequencies.an
    I've used CS3 in the past and never had an issue like this. The footage that I took can be previewed through Windows Media Player and other devices but it seems like Premiere doesn't want to play it back for me, visually.
    So visually you can see this:
    As you can see my sequence cursor is placed right in the middle of the sequence with no video playing and also, the preview box for the clips in the bin also has the cursor in the middle which should also allow some sort of video to be shown. Instead, I have these bleek boxes of gray.
    If anyone has experienced this, please let me know. Thank you!

  • Video podcast not playing in separate window

    for some unknown reason, when I click onto the small video window where the artwork shows, it doesn't show the video podcast in its own window any longer
    the window appears on the taskbar, but it doesn't maximize
    I downloaded the latest version of iTunes, but still no luck
    any suggestions/
    thanks

    my mistake

  • I have a HP-6210 Laptop with Windows 8.1 ... and Videos are not playing from youtube espn etc

    I have a HP-AMD A4-6210 Laptop with Windows 8.1 ... and Videos are not playing from youtube espn etc
    This question was solved.
    View Solution.

    Hi,
    Try a clean installation of the flash plugin/activeX as follows.
    First, download the Flash uninstall utility on the link below and save it to your Downloads folder.
    Flash Player Uninstaller.
    When the download has completed, close all browser windows, open your Download folder and run the uninstaller.  After this has completed, restart the notebook.
    When windows has reloaded, download and install the latest version of Adobe Flash.  Note: You may want to deselect the option to include McAfee Security Scan Plus before downloading.
    When the installation has completed, restart the notebook.
    If the above doesn't correct the issue, then try the following.
    First of all, download and run the Shockwave uninstaller on the link below.
    http://fpdownload.macromedia.com/get/shockwave/uninstall/win/sw_uninstaller.exe
    After this has completed, restart the notebook.
    When windows has fully reloaded, download and install the latest version of Shockwave on the following link.
    http://get.adobe.com/shockwave/
    Again, after this installation, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Why video does not play when embedded in a PDF when viewed in Windows 8?

    I have a situation where video must be embedded within the PDF document and it was working for us using older versions of IE and on 32 bit machines and using acrobat X. When the same file was tested on Windows 8 it looks good and behaves well except the embedded video does not play. The same video (.mp4) will play on the new OS if it is not embedded in the PDF.
    Is this because the PDF is looking for a 32 bit flash player? Am I doing something wrong and/or is there a fix for this situation?

    Are you watching the pdf file from Adobe Reader?
    Windows 8 by default has a diferent reader for pdf files that does not support rich media elements.

  • My quicktime videos will not play on my hp envy (windows 7). the computer freezes and i have to res

    my quicktime videos will not play on my hp envy15 (windows 7 64).  the screen goes black, freezes and i have to restart.
    I have tried to open files by opening itunes or quicktime or media player.  I have been able to play the videos broefly but then they typically freeze.

    Uninstall Quicktime, Then reinstall it. 
    http://www.apple.com/quicktime/
    THX

  • Videos will not play in presentation mode.

    Videos will not play in presentation mode. They play fine when I preview them in Keynote but once I am presenting it trys to play and then skips the slide. 

    Hi dalekw83,
    Thanks for visiting Apple Support Communities.
    If videos will not play in iTunes for Windows, start with the troubleshooting tips found here:
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/ts1718
    All the best,
    Jeremy

  • Video does not play on external plasma monitor

    Forum
    Here is my situation.
    I received footage captured with a Panasonic HVX-200, the specs are:
    29.97fps, Compressor: DVCPRO HD 720p 60, frame size: 960x720
    I use an Intensity Pro video card for monitoring on a 42" Samsung LCD. When the Intensity Pro card is set to HDTV 720p 60 (1280x720) the video does not play on the LCD, all I get is a still frame. When the Intensity Pro card is set to Intensity NTSC 720x486, it plays on the LCD but it's not at its best quality. The footage always plays fine in the FCP Canvas and Viewer windows.
    Any ideas on what may be going on?

    YOu need to be using DVCPRO HD 720p60 8-bit 59.94...and whatever DECKLINK header that is there for the card. I use the Kona 3, so mine is AJA KONA DVCPRO HD 720p60 8-bit 59.94. 59.94 because no matter what frame rate you shoot, the video stream is a 59.94 stream to the monitor.
    I hope that does it. No experience with the Intensity.
    Shane

  • Some videos will not play (blank screen).

    Some of my videos will not play. I select the video and a "Play" arrow shows in the upper left portion of the screen, but the screen is dark (blank). I can press Menu and return.
    I don't believe it's a size issue because certain other larger videos do play. Nor do I think it's a format issue because all of the videos are the same format (*.m4v). It also doesn't appear to be a time/sync issue because some videos added after others do play and some don't.
    I really don't have a problem reformatting and starting over if that is the best or only solution as I only use iTunes and don't have calendar, notes, etc.
    Thanks in advance.
    iTunes Ver 10.5.1.42
    iPod Classic 30Gb Ver 1.3
    O/S Windows XP SP3

    Where are these from? Are they from the iTunes Store or where they downloaded elsewhere and then added to your library?  Perhaps you can try restoring your iPod to factory settings and then resyncing the videos back over to it.
    If the videos are not from iTunes, perhaps you can try and re-convert them using a third party utility such as Handbrake or MPEG Streamclip.
    http://www.squared5.com/
    http://handbrake.fr/
    B-rock

  • Yahoo music videos do not play with v4 - rolled back to v3.6 and had no problem

    yahoo music videos do not play with v4 - rolled back to v3.6 and had no problems.

    DustinMedlam, I have the same exact problem. I started using my Iphone 4S for shooting video about 2 months ago and tranferred them to my Windows machine with Windows 7. I use the clips in Sony Vegas pro 11 and make short movies. I upgraded to ios 6 last week and every video that I shoot with my iphone 4S now is not usable in Quictime or Sony Vegas???? My old videos from before ios 6 play just fine and I can use them in Sony Vegas with no problems. The only way to play the files is with Windows media player. this does me no good as I just began making short films and now I can not use any of the video I have shot since ios 6. I also have a Samsung Galaxy S2 and I shoot video with it and use the clips in Sony Vegas with no issues!?? I can not believe this is not BLOWING up on the internet like the WIFI issue is..... What do we do? All my video gear is for my Iphone not my galaxy S2. This is very annoying. I also notice that no one from Apple response to these support forums. So why are they available?? What a JOKE!

  • NMH 410 "Remote Access" - Videos Do Not Play

    When accessing my Media Hub from a "remote" location the videos do not play (I only have videos on my Media Hub). 
    Instead, I get the following error message:
    Error: Could not play the selected title
    Windows Media: this media player was detected but is not responding. 
    The version, plug-in, or codec may be incorrect.
    These same videos play without any problem on my home network using the same PC(Windows Vista), IE browser (8), and Media Player (11.0.5x).
    Does anyone have any keys to success that they can offer?
    My Network:
    DSL with "bridged" modem
    E4200 Linksys router
    Ports forwarded 80, 443, 9000
    Media Hub 410
    Windows XP desktop (wired)
    Windows Vista laptop (wireless)
    MAC 10 laptop (wireless)
    IE 8
    Windows Media Player 11.0.5x
    Video Files (all) .wmv format
    Files imported to Hub through Media Importer
    Files manually moved from Import Folder to Video Folder on Hub File Browser
    All Video Thumbnails shown on Hub Homepage
    As mentioned there is no problem playing these video files at home, nor is there a problem accessing the Media Hub "remotely".  I just cannot get the files to play from a remote location.
    Any ideas or recommendations?
    dutch184

    Hi Fhizoo8:
    Thanks for that knowledge base listing.  The items there only served to re-enforce those things that have already been attempted. 
    I have not tried your suggestion to uninstall and reinstall Windows Media Player.  I'll do this on the laptop that I use while at remote locations, and on the desktop that I have wired to my home network.  At this point I'll reach for any straw that might allow these videos to play (remotely).
    To answer your question, yes I have all 3 ports forwarded on my router (80, 443, 9000) and married to the IP of the Media Hub.  I also access the Media Hub through the HTTPS format, and through the DYNDNS format without any problem.  I do not use the www.cicomediahub.com method of remote access.  That route is never reliable, nor is it ever working and when it does work the videos are buffering every 3-5 seconds.  
    I will try the unistall and reinstall of the Windows Media Player.  I will get back to let you know if it had any positive affect.
    Thanks
    dutch184    

  • 24 fps video does not play in CS5.5 source monitor without choppy motion

    Problem: 24 fps video does not play in CS5.5 source monitor without choppy motion. 30 frame will play fine. I took the same 24fps shot, using the exact same setup parameters, and played it in my CS5.0. No problem. I did them side by side and checked to make sure everything was EXACLTY the same. The 24fps shot played smoothly in the CS5.0 source monitor. Can anyone tell me what the solution might be to get the CS5.5 to play smoothly? When I rendered it on the timeline in CS5.5 it played smoothly on the timeline. Perplexed.

    Thanks Tood,
    Here's the other info. I am running CS5.5 on a windows 7 ultimate 64bit (service pack 1) OS. All of the recent updates have been installed on both the OS and the CS5.5. The source footage is H.264.mov from a nikon d7000 at 1080p 24fps. My video card is an Nvida GeForce GTX285. My processor is an Intel Core i7 3.33GHz with 12GB ram. I am running no third party codecs or effects. I am using the Mercury Playback engine GPU accelerator. I am using a DSLR24 frame project setting.
    Here is the problem: When I bring a 1920x1080 24fps.mov file into my DSLR24 frame project, or any project setting, in my CS5.5 and open it in the source monitor it plays as if it is trying to catch up; stuttering and skipping; it plays the same on the sequence timeline until I render it.  I get no error messages. When I bring the exact same file into my CS5.0, with the exact same project settings, it plays perfectly in the source monitor and on the timeline without rendering. When I bring in a 1280x720 24fps.mov or any other size file into my CS5.5 in any project configuration, it plays perfectly smoothly. Everything plays smoothly without renedering in the source monitors of my CS5.0 and CS5.5 except for a 1920x1080 24fps.mov file in CS5.5. The exact one that I need to play there.
    I would have no problem cutting in my CS5.0 if it intergrated with audition; which is why I bought the CS5.5.
    Thanks,

  • Video does not play in Viewer or Canvas

    Hi, I am new to Final Cut Pro. I just imported a couple of .mov files into FCP and have added them to a sequence. When I try to play the files on the Canvas, the video does not play (just shows the first frame). Same goes for Viewer window for an individual file. Help!

    You can't really use H264 directly in Final Cut Pro without a lot of hassle.
    Your audio has the wrong sampling rate. Digital audio for video is always 48000 kHz.
    Use QuickTime Player or Compressor to export a copy of your files using the ProRes codec with the correct audio settings. Bring those into FCP.

Maybe you are looking for