Video isn't stable when capturing in Premiere Pro

Hello, I'm hoping someone can help with my problem.
I'm on a two year old Dell PC, Windows 8.
I recently installed this video capture card to work with Premiere. The card was installed properly, and the driver is up to date.
When I attempt to capture video, the video is very glitchy. Only a few frames of the video is seen in the capture window, then a black screen. The audio plays fine however. I am able to record the video, and despite not being able to see what I'm recording, it does work. After I stop recording, the full video file is available in my project folder with no glitches at all. What's going on here? Why can't I see what I'm recording?
I have verified that the card works fine in other programs. In Windows Movie Maker, I am able to view and record video no problem at all.
Any troubleshooting would be greatly appreciated.

The card description says it has 4 pin power connector... did you plug in a power supply connection?
This is more about not capturing at all, and MAY be only for Win7, but reading can't hurt
http://helpx.adobe.com/premiere-pro/kb/cant-capture-dv-hdv-video.html -and more about Windows http://forums.adobe.com/message/4708997
I have NOT used either, but many say to try these for SD capture http://windv.mourek.cz/ or http://www.exsate.com/products/dvcapture/
I have NOT used it, but many say to try this for HDV capture
-archived at http://www.videohelp.com/tools/HDVSplit
-Click the 1st link under "Download sites:" for the latest version

Similar Messages

Captured video using Premiere Pro CC on MAC, wont import when moved to Premiere Pro CS6

Using a Captured video on Premiere Pro CC on my Macbook air, my video wont import when moved to Premiere Pro CS6 when i try to edit it on a pc (Windows 7)
When I try to import the file into CS6 it says *error while decompressing file*
If anyone has any idea what could have happened or what I might have done wrong please reply.
Joseph

mojo,
Do you have QuickTime and the associated codecs installed in your PC?
Thanks,
Kevin

99 or 100% when it says Premiere Pro has stopped working and needs to close. What's going on?

I am using the premiere pro trial at the moment and have been trying to render a video for a solid week now. My computer is far more powerful then the recommended specs and yet it still takes 2 hours to attempt to export a 3 minute video (that isn't even heavily edited) and not only that but it will get to 99 or 100% when it says Premiere Pro has stopped working and needs to close. I have used earlier versions of the product before and never had such problems, even my 2 year old laptop could breeze exporting. What's going on?

Thanks, I'm a bit new to asking for help!
Version : Premiere Pro CC 2014.2 (8.2)
It is up to date
I'm using Windows 8.1 build 9600
My sources are contained in .mov, .mp4 and .png. The codec I'm trying to use is H.264
After I set the project to export I got this error message every time it gets to either '99' or '100%' completed. "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
I have never had such a problem with the program which makes me think it might have something to do with a recent update.
No other notable software was running during the export.
I don't have any third-party effects or codecs installed.
I have 64 bit OS and processor, Intel i5 - 4670K quad core clocked at 3.40 GHz. 12 GB of RAM. And a GTX 770 with 2GB of video RAM.
Unless it was installed in the trial, I do not have the Mercury Playback Engine.
And finally, it can be noticeably choppy during the preview when it gets to the part I don't have rendered but is fine again for a bit if I replay those parts. A part from being a bit slower then usual, I didn't actually run into a major problem until I started exporting.
Thank you for the help! Any suggestions?

How do I get audio back on single clip that loses audio when imported into Premiere Pro CC?

I've got one clip out of many that for some reason won't play any audio when imported into Premiere Pro. I am new to Premiere Pro so am hoping it's something stupid I've done, but this is a problem with just a single clip exported the same way as all my others, the original audio is loud (not quiet) and none of the FAQ issues seem to apply (ie I haven't muted the audio or anything stupid like that)
The clip was exported from Plural Eyes into a "master" Premiere Pro project where the audio is fine. I exported it as a short MP4 clip and if I play the clip in Windows Media Player the audio is there loud and clear.
But when I import the clip into a fresh Preimiere Pro CC project this clip appears with just the "film strip" icon on the far left in the Timeline panel, unlike other clips which have an icon that shows "film strip" in the background and "audio wave" in the foreground.
I'm hitting so many glitches with the CC editions of Premiere Pro and After Effects which have annoying inconsistencies between them I'm tempted to just go back to Sony Vegas Pro (single program, no hassle) but hoping most of these issues are down to "newbie incompetence". Very hard to understand why this one clip out of many should be giving me this specific problem though. Any ideas?

I'm getting so many weird results. Most go away by simply closing the project and re-opening and I only have 6GB memory but even so, I'm disappointed by what I thought was supposed to be more "world class" video editing software than Sony Vegas Pro which I found to be a lot more stable. Also struggling with differences between Premiere and After Effects. Every time I want to do something in Pro I seem to need to go to After Effects and vice-versa. After Effects lets me do more of what I could "just do" in Vegas Pro timeline, but it's hideous for lining up audio and having to render anything in RAM to even get a clue as to what a change has done. Need to add Audition to the long list as well I suspect. Fun times!

Phantom Flex footage dark when imported to Premiere Pro

Hi everyone (and hopefully Adobe Staff, also),
I am aware this has been posted before, though from what I can see no one, Adobe Staff or users, have found a solution. I am hoping we can change that!
I recently directed a Music video that was shot on the Phantom Flex. Everything went smoothly and after dropping the 3TB of footage via Seance (program by gluetools for Mac) I am now faced with a problem. While all the footage looks fine in Seance and on the Finder; when imported to Premiere Pro (CC v8.1, Caravan (latest update currently) it goes very dark, blue and flat. Premiere Pro is interpreting the colour/luma of the footage wrong.
Adobe states that Premiere Pro supports Phantom Flex .cine files but it seems that while you can edit with them, the colour/luma is interpreted incorrectly. Many other people also seem to have this problem.
These images below are all screenshots from Macbook Pros, one with ‘Glue Tools Phantom Cine Flex 4K’ installed (the gear house’s laptop) and one without (mine).
I need to find a way to get Premiere Pro to interpret the colour/luma properly in Premiere Pro to edit the project, it seems the Glue Tools plugin is not the solution I was hoping for, as some people have suggested elsewhere.
Is there a way to fix this within Premiere Pro or a plugin etc?
Has anyone successfully edited Phantom Flex footage in Premiere Pro?
Any help would be extremely helpful as I am really stuck here.
Thankyou so much.
Here is an example with some footage shot by the crew before me (still left on one of the cards), as you can see it is not just my footage that isn't working in Premiere Pro.
Thankyou,
Jack

It looks to me like Seance (and Finder) are applying a LUT to the footage, whereas PP is showing you the flat image as it was actually recorded, which is normally the desired result. Was there a LUT applied in the camera viewfinder or on-set monitor, something you might also apply in PP?

Media Encoder crashes when exporting from Premiere Pro

Media Encoder crashes when exporting from Premiere Pro. I am queueing multiple files for export and Media Encoder will crash. The computer system has 32GB of RAM and the videos export fine in Premiere, but that requires exporting each one individually. Each video file is being down converted and some can be quite long (upwards of 3-5 hours). Nothing else is running on the computer that would take up memory.
Any idea why Media Encoder will crash?

Try turning off GPU acceleration.

Bridge CC crashes when opened in Premiere Pro CC

Bridge CC tends to crash regularly when open in Premiere Pro CC. Sometimes it takes longer to crash than other times. sometimes it doesn't crash at all but it appears if I leave both programs open for an hour and then come back to work on a job it will crash in the middle of looking at footage to import into premiere. Is this a bug or is there some way to fix it on my computer?

Need more info. What OS and ram?
Bridge is a processor intensive program and if processing video in Pro CC it could starve computer for resources.

Capturing with Premiere Pro CS5 & Canon Legria HV40

Hello everyone,
I have an issue trying to capture footage from my Canon Legria HV40. My desktop operates with Windows 7 / 64bit and I use a firewire port when attempting to capture from the DV cassette on the Canon Legria HV40. After opening Premiere Pro 5 (not a trial version) I connect my camera via all the correct ports and open the capture window in the software. After setting up all my preferences for the capturing process the software recognises the camera and I am able to operate the camera from my desktop (fast forward, rewind, play etc...).
The issue starts at this point. When i press "Tape" or "Play" then "Record" to start the capturing process the camera kicks into action. However the software does not record anything from the camera.
Does anyone have any suggestions or have they come accross this issue before. Any help would be appreciated.

MKoffy Hi,
It works just fine here, same set up, but with CS5.5.2 not older version.(5.5.1 or 5.5 did not work), other contributers spoke of a "LEGACY" driver?, I think Harm Millard he may know more than I do. We are PAL, the camera obviously works, make sure you have camera set at 1920 x 1080 i.And the same setting in PP, however PP should automatcally set that for you.
In fact when Exporting to Tape it is amazing and starts the camera with out having the record button executed., it (the HV40 is Anamorphic at 1440 x 1080 (the limitation for Pro tape) and will record at Progressive, the pixels are rectangle not 1.0 , but the output is i). Do not save clips to another DRIVE.It is best in the RAID set up. according to Canon Specs it records at HDV 1080/50i , 1080/25i (PAL) These settings must match the set up in Premiere Pro 5.5.2 exactly.I do not set IN or Out points, it might have been a good thing to stripe the tape in the first place as it will recognise the Indexing numbering better that way.
I must add the quality of the Export even to Blu-ray astounded me. Nearly as good as the Canon 5D Mark II 1920 x 1080p but, that was from a CF card.
Good luck
Ps. Frankly the Premiere Pro CS5.5.2 surprised me when it recognises all that when it went to work. Because when you used Premiere Pro 1.5.1 everthing was manual, well nearly.

When I run Premiere Pro CS5, it works for awhile then locks up

My machine has 16gb of memory and a Intel 7 processor. When I run Premiere Pro CS5, it works for awhile
and then locks up for anywhere from a few seconds to over a minute. Can anyone dignose this problem?
Could it be where Premiere is installed in relation to where my files are stored?
Any help with this vexing problem would be appreciated.

I edit AVCHD with the computer described in http://forums.adobe.com/thread/652694 and have no problems
My 3 hard drives for video editing are configured as...
1 - 320Gig Boot for Win7 64bit Pro and ALL program installs
2 - 320Gig data for Win7 paging swap file and video project files
When I create a project on #2 drive, the various work files follow,
so my boot drive is not used for the media cache folders and files
3 - 1Terabyte data for all video files... input source & output export files
How many hard drives do you have, and where is everything located?

Can I directly upload video from my HDR-SR11 SONY to Premiere Pro???

Can I directly upload video from my HDR-SR11 SONY to Premiere Pro???

thank you Shoot. I was afraid that the n word would answer that querie. OK. Please recommend a FREE software that I can use to import on to the hard drive that is reliable and w/out error messages e.g. "Browser will close" as in sonys PMH a new replacement for PMB that fails horribly. I uninstalled and installed the Sony PMH four or five times w/Sony "Techs" [I you want to call them that]. And they admitted that the software has problems. The final solution from the "tech" on the phone was that to just keep on uninstalling and install until it worked. Wow! That coming from Sony the electronics Giant. Below is the transcript of one of the chats concerning this issue.
3:37 PM Connected. A support representative will be with you shortly.
3:38 PM Support session established with Angie (C70I).
3:38 PM
Angie (C70I):
Hello! Welcome to Sony Online Support. My name is Angie.
3:38 PM
Customer:
GLAD to see you
3:38 PM
Customer:
same problem
3:39 PM
Customer:
browser will close error
3:39 PM
Customer:
I was in settings this time when it froze and closed
3:39 PM
Angie (C70I):
I understand that when you run 'PMH' you get an error as 'Browser stopped working'.
3:40 PM
Customer:
es
3:40 PM
Customer:
yes
3:40 PM
Angie (C70I):
Thank you for confirming.
3:40 PM
Customer:
hmmm
3:41 PM
Angie (C70I):
Well, based on the information you have provided seems that issue can be with operating system.
3:43 PM
Angie (C70I):
As we have solved the issue earlier and worked fine, there can not be a problem with the 'PMH' software.
3:43 PM
Customer:
"seems" seems very vague
3:43 PM
Customer:
can I just reinstall the pmbrowser
3:44 PM
Angie (C70I):
This is the first time we have come across such issue.
3:44 PM
Customer:
r u saying that PMH does not work w/Windows 7!!!
3:44 PM
Customer:
you s
3:45 PM
Customer:
think Sony would be so stupid to eliminate themselves from the market like that??
3:45 PM
Angie (C70I):
I suggest that you contact your computer manufacturer before you uninstall the software and install 'PMB'.
3:45 PM
Angie (C70I):
'PMH' is a compatible software for Windows 7.
3:45 PM
Customer:
So you agree that PMH can not work on my computer as well???
3:46 PM
Customer:
so make it work
3:46 PM
Customer:
do you have a supervisor
3:47 PM
Customer:
check the web it is not the first time this issue has risen
3:47 PM
Customer:
are you trained

Capturing in Premiere Pro

Has anyone run into problems capturing video from a HD desk SDI to Premiere Pro? It cuts off after 40 minutes. Currently running Premiere on Mac tower 2013 running 10.8 Processor 2 x 2.4 GHz 6-Core Intel Xeon 16RAM Graphic card ATI Radeon HD 5770 1024 MB. Also, what I can capture I cannot see T.C in QT player only in Premiere. Any help would be great!

PostTech,
Yes, tc is embedded and you should be able to read it if you are using QT7 Player and choose TC in the lower left toggle in the QT player window.
~Myron

What types of video files can be run on Adobe Premiere Pro CC 2014?

What types of video files can be run n Adobe Premiere Pro CC 2014. Please answer this fast. I need it ASAP.

Adobe Premiere Pro Help | Supported file formats

I get an error when I open Premiere Pro (CS4)

Hi guys i hope you can help me :)
When i open Premiere Pro the Windows
opens normally and starts loading the
program parts. then i get the following
error message:
Premiere Pro has encountered an error. [..\..\Src\ImporterProcessClient.cpp-127]
i don't know why ?? please help me ;)
greets mark

Eddie, Thank you for your update. When it crashes, I did submitted the crash Report to Adobe, so, you should have all the information you need. See below the copy of the crash report. <?xml version="1.0"?> <!DOCTYPE crashreport SYSTEM "AdobeCrashReporter.dtd"> <crashreport version="1.1" crVersion="3.0.20080806" applicationName="Adobe Premiere Pro CS4" applicationVersion="4. 0. 1. 0" build="unknown"> <time year="2008" month="12" day="21" hour="18" minute="38" second="3"/> <user guid="c118a540-9d5f-4415-ab8b-b1c6e3906423"/> <system platform="windows" osversion="6.0.6001 SP 1.0" applicationlanguage="Language Neutral" userlanguage="en_US" oslanguage="en_US" ram="3325" machine="Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz" model="x86 Family 6 Model 15 Stepping 6" cpuCount="2" cpuFreq="2330 MHz" busFreq="" locale="English (United States)"/> <crash exception="EXCEPTION_BREAKPOINT" instruction="0x00c2dd10"> <backtrace crashedThread="0"> <thread index="0"> <stackStatement index="0" address="0x00c2dd10" symbolname="dvacore::debug::DVA_DebugBreak"/> <stackStatement index="1" address="0x00cb197a" symbolname="dvacore::utility::ThreadSafeMessageDialog"/> </thread> </backtrace> <registerSet> <register name="EAX" value="0x00000000"/> <register name="EBX" value="0x00000000"/> <register name="ECX" value="0x00000000"/> <register name="EDX" value="0x00000000"/> <register name="ESI" value="0x00cb177e"/> <register name="EDI" value="0x00000000"/> <register name="ESP" value="0x0012f2a0"/> <register name="EBP" value="0x00000000"/> <register name="EIP" value="0x00cb197a"/> <register name="EFL" value="0x00000246"/> </registerSet> <binaryImageSet> <binaryImage start="0x00400000" end="0x004fa000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\Adobe Premiere Pro.exe"/> <binaryImage start="0x77910000" end="0x77a37000" type="__TEXT" path="C:\Windows\System32\ntdll.dll"/> <binaryImage start="0x762e0000" end="0x763bb000" type="__TEXT" path="C:\Windows\System32\kernel32.dll"/> <binaryImage start="0x10000000" end="0x10010000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\CrashReporter.dll"/> <binaryImage start="0x718b0000" end="0x7198c000" type="__TEXT" path="C:\Windows\System32\dbghelp.dll"/> <binaryImage start="0x768a0000" end="0x7694a000" type="__TEXT" path="C:\Windows\System32\msvcrt.dll"/> <binaryImage start="0x77710000" end="0x777d6000" type="__TEXT" path="C:\Windows\System32\advapi32.dll"/> <binaryImage start="0x767d0000" end="0x76892000" type="__TEXT" path="C:\Windows\System32\rpcrt4.dll"/> <binaryImage start="0x75850000" end="0x75858000" type="__TEXT" path="C:\Windows\System32\version.dll"/> <binaryImage start="0x00170000" end="0x0017f000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\LogUtils.dll"/> <binaryImage start="0x76ab0000" end="0x775c0000" type="__TEXT" path="C:\Windows\System32\shell32.dll"/> <binaryImage start="0x763c0000" end="0x7640b000" type="__TEXT" path="C:\Windows\System32\gdi32.dll"/> <binaryImage start="0x77ad0000" end="0x77b6d000" type="__TEXT" path="C:\Windows\System32\user32.dll"/> <binaryImage start="0x76280000" end="0x762d8000" type="__TEXT" path="C:\Windows\System32\shlwapi.dll"/> <binaryImage start="0x775c0000" end="0x77704000" type="__TEXT" path="C:\Windows\System32\ole32.dll"/> <binaryImage start="0x728e0000" end="0x7297b000" type="__TEXT" path="C:\Windows\winsxs\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.143 4_none_d08b6002442c891f\msvcr80.dll"/> <binaryImage start="0x72660000" end="0x726e7000" type="__TEXT" path="C:\Windows\winsxs\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.143 4_none_d08b6002442c891f\msvcp80.dll"/> <binaryImage start="0x00c00000" end="0x00d55000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\dvacore.dll"/> <binaryImage start="0x769a0000" end="0x76a2d000" type="__TEXT" path="C:\Windows\System32\oleaut32.dll"/> <binaryImage start="0x001a0000" end="0x00229000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\ASLFoundation.dll"/> <binaryImage start="0x74980000" end="0x74b2b000" type="__TEXT" path="C:\Windows\winsxs\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.60 01.18065_none_9e7abe2ec9c13222\GdiPlus.dll"/> <binaryImage start="0x760f0000" end="0x760f7000" type="__TEXT" path="C:\Windows\System32\psapi.dll"/> <binaryImage start="0x00240000" end="0x00246000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\PRM.dll"/> <binaryImage start="0x6ef50000" end="0x6ef6e000" type="__TEXT" path="C:\Windows\System32\shimeng.dll"/> <binaryImage start="0x75fc0000" end="0x75fec000" type="__TEXT" path="C:\Windows\System32\apphelp.dll"/> <binaryImage start="0x6de60000" end="0x6dee8000" type="__TEXT" path="C:\Windows\AppPatch\AcLayers.dll"/> <binaryImage start="0x76040000" end="0x7605e000" type="__TEXT" path="C:\Windows\System32\userenv.dll"/> <binaryImage start="0x76020000" end="0x76034000" type="__TEXT" path="C:\Windows\System32\secur32.dll"/> <binaryImage start="0x733b0000" end="0x733f2000" type="__TEXT" path="C:\Windows\System32\winspool.drv"/> <binaryImage start="0x75bf0000" end="0x75c04000" type="__TEXT" path="C:\Windows\System32\mpr.dll"/> <binaryImage start="0x76190000" end="0x761ae000" type="__TEXT" path="C:\Windows\System32\imm32.dll"/> <binaryImage start="0x76700000" end="0x767c8000" type="__TEXT" path="C:\Windows\System32\msctf.dll"/> <binaryImage start="0x77ac0000" end="0x77ac9000" type="__TEXT" path="C:\Windows\System32\lpk.dll"/> <binaryImage start="0x764f0000" end="0x7656d000" type="__TEXT" path="C:\Windows\System32\usp10.dll"/> <binaryImage start="0x74ed0000" end="0x7506e000" type="__TEXT" path="C:\Windows\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1d f_6.0.6001.18000_none_5cdbaa5a083979cc\comctl32.dll"/> <binaryImage start="0x003c0000" end="0x003d4000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\Startup.dll"/> <binaryImage start="0x023a0000" end="0x024dc000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\adobeowl.dll"/> <binaryImage start="0x024e0000" end="0x027e2000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\UIFramework.dll"/> <binaryImage start="0x027f0000" end="0x028d8000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\ImageRenderer.dll"/> <binaryImage start="0x7f840000" end="0x7fa07000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\MCDVD_32.DLL"/> <binaryImage start="0x74800000" end="0x74832000" type="__TEXT" path="C:\Windows\System32\winmm.dll"/> <binaryImage start="0x74720000" end="0x74759000" type="__TEXT" path="C:\Windows\System32\oleacc.dll"/> <binaryImage start="0x76a30000" end="0x76aa3000" type="__TEXT" path="C:\Windows\System32\comdlg32.dll"/> <binaryImage start="0x00f70000" end="0x00f9b000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\dynamiclinkui.dll"/> <binaryImage start="0x022d0000" end="0x02350000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\dynamiclink.dll"/> <binaryImage start="0x00fc0000" end="0x00fe1000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\processcoordinationclient.dll"/> <binaryImage start="0x011f0000" end="0x011f9000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Pro CS4\proce

I'm using windows 8 and when I open premiere pro then it says i need application manager, so i get it and that says i need adobe support advisor but that is discontinued and now i cant use adobe premiere pro

I'm using windows 8 and when I open premiere pro then it says i need application manager, so i get it and that says i need adobe support advisor but that is discontinued and now i cant use adobe premiere pro. what do i do now?

Do a clean (re)install:
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

When you install Premiere Pro as the admin on an iMac the audio functionalities work well but a second admin account on the same machine does not work. What can I do to fix this?

When you install Premiere Pro as the admin on an iMac the audio functionalities work well but a second admin account on the same machine does not work. What can I do to fix this?

It is a bad idea to hack computer passwords when you don't own the computer
Good luck with the school and the parents.

Video isn't stable when capturing in Premiere Pro

Similar Messages

Maybe you are looking for