Video issues since Windows 7 installation

Hello,
I recently updated my T500 2081-CTO to Windows 7 (formatted the drive for a clean 64bit install). Since then I've had two issues with the Discrete graphics. The first is that I can't change the brightness when I'm in high performance mode, and the second is that the graphics performance has gone way down since the update. I have a 3D screensaver from Planesoft that used to run at 20-25 FPS under Vista, now that I'm running Windows 7, it's at about 5-7 FPS.
I've seen a lot of posts about the brightness issue, but I've updated the drivers and it hasn't helped yet. I haven't seen anything about the graphics performance issue.
Thanks in advance

I'm not certan, but doesn't the switchable driver _include_ the appropriate Intel driver? You might be able to install the Intel driver you are trying if you set the machine in integrated graphics mode, but I don't think that's the right thing to do.
Which ATI driver are you running? This one in the driver matrix has an interesting comment in the Changes section:
"(Fix) Fixed an issue where the LCD brightness could not be changed when the graphics mode was set to high performance on starting the computer."
ThinkPad Switchable Graphics Driver for Windows 7 - ThinkPad R400, T400, T500, W500
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Unable to install itunes 10.5 after update issue. "windows installer package error"

So when the update for itunes happened, it wiped my ipod, and then my ipod would not work with itunes. So I uninstalled itunes and tried to reinstall it and it gives me that error message. "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I have tried all the fixes from deleting everything to running command prompts. I think i tried everything.
Method 1: Right click on the setup file and, from the drop down menu, select 'run as administrator'
Method 2: Open command prompt in elevated mode and, then unregistered and re-register Windows Installer.
1. In the Start search box and then type 'cmd', when the command application appears at the top of the start window, right click on it and, from the drop down menu, select 'run as administrator' and type each of these commands in the command prompt and press Enter
   • msiexec /unregister
   • msiexec /regserver
msiexec.exe belongs to the Windows Installer Component and is used to install new programs that use Windows Installer package files (MSI)
http://windows.microsoft.com/en-US/windows7/Command-Prompt-frequently-asked-ques tions
Method 3: Start the Windows Installer service
1. Click Start, type Services.msc and press {ENTER}
2. Double-click Windows Installer
3. Set the Startup type of Windows Installer to Manual
4. Click Start to start the service. Note down the error message if any.
5. Click OK.
If the above mentioned steps don’t resolve the issue, then
follow the steps and check whether you can resolve the issue:
Method 4: Empty your Temp directory and restart
1.       Choose Start > Computer
2.       In Computer, open the "C:" drive.
3.       Open the Users folder.
4.       Double-click the folder titled with your username.
5.       If you see an AppData folder, skip to step 10. If you don't see an AppData folder, proceed to the next step.
6.       Choose Organize > Folder and Search Options.
7.       Click the View tab.
8.       Select the option to "Show hidden files and folders." (In Windows 7 this option will be called "Show hidden files, folders, and drives").
9.       Click OK.
10.    Double-click the AppData folder to open it. If Windows needs your permission to continue click Continue.
11.    Double-click the Local folder to open it.
12.    Right-click on the Temp folder and choose Delete.
13.    In the confirmation dialog that appears click Yes.
14.    If you are unable to delete the Temp folder, close all programs, especially those in the Notification area ("System Tray") of the Windows Task bar and repeat step 12.
15.    Restart your computer.
Method 5: Removing iTunes
Note: iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes.
1.       Quit iTunes.
2.       From the Start menu, click Control Panel.
3.       In Control Panel, click Uninstall a program. The Programs and Features Control Panel opens.
Alternately, in Classic Panel of Control Panel, click Programs and Features.
4.       Select iTunes from the list of currently installed programs, then click Uninstall.
5.       When asked if you would like to remove iTunes, click Yes.
6.       After the uninstallation is complete, do not restart your computer if you are prompted to.
7.       If other program entries were listed for iTunes in Programs and Features remove those as well.
8.       In Programs and Features, also remove any iPod Updater applications that are listed in the same fashion as you removed iTunes.
Method 6: You may also try downloading the Windows Installer Cleanup utility and run that to remove the leftover ITunes installer files that may be causing issues with your current installation.
You may refer the following article to download the Windows Installer Cleanup Utility:
http://support.microsoft.com/kb/290301
1. Click on Start > All Programs and then click Windows Install Cleanup; the Windows Installer Clean Up Utility window appears, listing software that is currently installed on your computer.
2. Select iTunes from the list and click Remove. If you have multiple iTunes files, remove all of them.
3. Once you have completed the above steps to Empty your Temp directory, Completely remove iTunes and QuickTime, and Clean up iTunes installer files on the computer, you can install the latest version of iTunes from
To this:
This solution correct my bug.
I had the same error in with the i-tunes installation and i did this and it worked.... This works for any i tunes that fails to install itself on 64 Bit
You have to go into your registry.
Start, run, type in “regedit”.
Next go to HKEY_LOCAL_MACHINE.
SYSTEM
CurrentControlSet
Services
MSIServer
To the right you’ll see WOW64. Double click on it, or right click on it and click on modify. Change the setting from 1 to 0.
Next, go to the start menu again and type in the search box: “services.msc”.
Look for and find the Windows Installer service.
Double click on it and tell it to stop. Next, tell it to start.
You should now be able to install your programs.
------ By the way I dont have the WOW64 option is not available.
I was able to install quick time just fine. All of the other apple software associated with itunes installed fine but itunes did not. Im not sure if there is a virus that could do this. I didnt delete anything but apple folders.
I have tried other things but i cant remember exactly there were.
When the install process for itunes is running it changes with the error message shows up during install.
Thanks.

I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
Apple helps you find Original Sin with the Windows.

Audio and Video issue with Windows 8.1 upgrade on Ideapad n585

I upgraded my Ideapad N585 to Windows 8.1 the other day, took forever, but it made it through. Unfortunately, I now get boot erors for the Dolby software, and the AMD Vision/Catalysyt Control Center. Neither of these programs are able to start, from startup or even manually. They just won't run. Sound seems to come out fine still, but I do have video issues.
First off, my computer doesn't seem to recognize a HDtv as a monitor through the HDMI port. I still get an image, but it's set to current screen resolution instead of 1080i. I tried using the detect button to force it to look for a second monitor (my TV), but it showed nothing connected, though at the time I was using two screens. Now my monitor's screen resolution seems to be a little higher than my TV's, but it doesn't fit the screen properly, and will sometimes put a black border around the desktop, not using the full screen. I have also noticed, that when plugged into the tv, if a background program like a screen saver starts (and I am one of the few people who still use them, I like BOINC, sue me), it will reset the screen resolution to what it requires. When the program exits, the screen resolution stays, and that becomes the new max screen resolution until I restart the computer. So far, it only does this through the tv, if I run the laptop monitor alone, it doesn't happen.
I did try updating the software with what's available through the support site, but nothing happened. I even went as far as to use the Windows 9x~XP standbys of completely uninstalling, manually removing everything from the system registry I could find relating to these two programs, and then finally reinstalling the software. Giving the audio and video a complete clean slate to work from, and got no positive results. I restart the computer, Dolby and Catalyst won't boot, and blind to HDtv. Problems as described above still apply.
Anybody else have this issue? Anybody got a fix?

have you found a solution to this?
My computer updated to 8.1 without my wanting it to, I have the same problems as you. I installed the video driver because the brightness was locked on what I had it. (the bar would move but did not change)
I searched for brightness and n585 and I was able to find a driver, now brightness works but HDMI still does not. When I plug in the TV both screens go black with all 4 options in the "project" screen.
*edit*
this worked for me i stumbled across this
I unplugged the power cable with the hdmi cable plugged in. Hit (windows key+p) scrolled to duplicate and it worked.I plugged in the power cord back in and it still worked.

Playback & Video issues since CUDA upgrade

I'm on a 2014 Retina MacBook Pro running Yosemite 10.10.2.
Two days ago the CUDA Preferences panel said there was an upgrade, and installed CUDA Driver Version 6.5.36.
Since then, I'm getting lousy playback performance ... video is not smooth, playhead jumps around, often the whole screen or portions appear "scrambled." (see source monitor in attachment)
This 'scrambling' occurs OUTSIDE of Premiere as well.
When I tried to do an export with Media Encoder, my whole system started 'freezing' for 5 seconds every 2 seconds ... to the point where even the mouse cursor was unresponsive.
Had to force restart.
In Activity Monitor "aerendercore" shows as "not responding" around 10 times a day.
Premiere crashes 2-3 times a day.
I checked nvidia website, and they had a 6.5.37. Installed that, but same issues.
I tried changing the Mercury Playback Engine to OpenCL and to Software Only -- but that didn't help.
CUDA Panel also says "GPU Driver Version" is "10.2.1 310.41.15f01" ... not sure if that is something that can be updated.
I'm rebooting 4-5 times a day.
Not sure what to do ... is anyone else having these issues?
Should I downgrade the CUDA Driver?
Update: I found this post where someone reports a similar issue but with now solution:
Yosemite NVIDIA issue on MacPro 5,1 | Apple Support Communities

@jstawen -- I don't know what any of that means! I'm just wondering if OpenCL still uses the nvidia card in my machine, or the Intel...
I tried rendering a timeline ... with CUDA, 50 seconds.
WIth OpenCL ... jerky progress for 90 seconds, then CRASH, "We're sorry, Premiere has died..."
(Twice)
This is ridiculous.
Should I edit in OpenCL then switch to CUDA?!?!
Feature request: hot key to toggle between the two!
ARG!

Video issue since installing ios6

since i installed ios6 i have notice the video feature keeps disappearing from the camera app has anyone else experienced this?
Been searching and have not seen anyone mention this as of yet and was wondering if anyone has seen this and if there is a fix for it

Hi all,
it seems that the root cause for this issue is identified:
Unfortunately it's not a bug, but a bufix which is responsible for this changed behaviour of autocomplete function in Safari browser.
The bugfix was introduced in iOS 6 and corrects that password input elements on HTML forms with the autocomplete attribute set to "off" were being autocompleted although they should not.
You can check if this is also the root cause in your case by searching in the source code of the webpage with the HTML form if the autocomplete tag is present and set to "off":
<input type="Password" name="password" ... autocomplete="off" ... >
References:
[1] http://support.apple.com/kb/HT5503 (search for string "CVE-2012-0680")
[2] http://www.cvedetails.com/cve/CVE-2012-0680/

Flash Video Issue in window 8.1

We are using 25/30 system running with window
8.1 professional (64 bit ) .we have an intranet site (w3.infratelworld.in) and
uploaded some flash video on it and the
same video is working on window 7/8 professional (In any Browser) but it is not
working on win 8.1 even we have tried on Mozilla and Chrome but it's not
working and we are not getting any error too
So Please support for the Same ASAP.

Flash Player in Windows 8.1 get updates through Microsoft Update, so you may try run Windows Update and make sure latest version of Flash Player been installed.
You may visit this website for more help regarding to Flash Player:
http://helpx.adobe.com/flash-player.html

Pc and mac gmail issues since fios installation

I have several gmail accounts. Before Fios install I received all emails into pc and mac. Now I receive some in the pc, but not in the mac and vice versa. I have to always keep the gmail server open to make sure to not miss anything.
IMAP AND POP ENABLED ON GMAIL SERVER.
IN MAC ALL ARE SET FOR POPMAIL
IN PC HAVE IMAP.ON MICROSOFT OFFICE 2003/advanced setting 995/465.
help!!

Yes it's multi-platform and you are permitted 2 installations.
If you are not in a hurry PSE11 is due soon, but in the meantime why not give the free trial for PSE10 a go.

Windows installer issues

Good day, I'm having issues with windows installer on a xp sp3 pc. I downloaded the newest version of windows installer and ran it a couple of times. Every time it installs without problems and then I restart the pc but when I try and install the program
I need the same error comes up to say that windows installer crashed or is not working.
How can I resolve this issue?

What do you see in event logs?
Can you post the exact error?
Arnav Sharma | Facebook |
Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread.

Windows installer popup in certain page

Hi
when I open some page in ie 11 I get a quick windows installer popup and then it disappear what is that ?
Thanks

Hi,
The Windwos installer popup means that there are some programs need to be installed.
Does the behavior persist if you start IE in No Add-ons mode? Start > (All) Programs > Accessories > System Tools > Internet Explorer (No add-ons).
If no errors occur, the problem is caused by one of the add-ons that typically load together with Internet Explorer.
You may also try to use the Windows Installer CleanUp Utility or the hotfix below to check the issue:
The Windows Installer CleanUp utility deletes all files and registry settings associated with a program's Windows Installer configuration.
Fix problems that programs cannot be installed or uninstalled
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Does NOT remove an application, allows you to re-install one.
http://technet.microsoft.com/en-us/magazine/2008.08.utilityspotlight.aspx
I also would like to suggest you remove any 3rd party anti-virus from your system.
In addition, please ensure the computer currently fully-patched at Windows Update.
Regarding the event you've found, most times it isn't an issue, try this on for size:
Troubleshooting DCOM:
http://technet.microsoft.com/en-us/library/cc751272.aspx
error: “The application-specific permission settings do not grant Local Activation “:
http://blogs.msdn.com/b/mutaz/archive/2009/02/11/error-the-application-specific-permission-settings-do-not-grant-local-activation.aspx?Redirected=true
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Itunes 64 bit wont install on my Dell XPS due to Windows Installer problems. Can somebody help me out with this?

I have Windows 7 home premium, running on a Dell XPS 15, with 64 bit OS, and when i went to install itunes for my new phone, it would almost install, but then say that it couldn't install due to issues with windows Installer. has anybody had this happen to them? can anybody help me out with this?

Many thanks.
"There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor".
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Install problems due to Windows Installer not being accessed

I have been trying to correct the issues with Windows Installer for days. IO have tried "re-start" through the "run" program via the start menu. I have tried "fix It" throught Windows web site. I am running Windows XP media edition and IE 8. What can I do to allow Windows Intaller access and download Adobe Reader?
TAROZ

A blank message isn't very helpful...
If I were you, I would try running the Actobat and Reader Cleanup Tool
http://labs.adobe.com/downloads/acrobatcleaner.htm
to remove all traces of any versions of Reader.
Then, if you want to reinstall Reader, download its full installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

Having trouble installing ProIX on new Windows 8 machine after XP crash. Get almost ll of the way through and get an error box ... contact system support. Only way out is to abort and then it un-installs. Wondering if a licensing max issue since we did

having trouble installing ProIX on new Windows 8 machine after XP crash. Get almost ll of the way through and get an error box ... contact system support. Only way out is to abort and then it un-installs. Wondering if a licensing max issue since we didn't get an opportunity to uninstall off of crashed machine?

Hey robr72339266,
With a single user license, you can install Acrobat on maximum two computers, say, your laptop at work and desktop at office.
But, you cannot use Acrobat on both the machines simultaneously.
You will first need to deactivate Acrobat from the old machine, then install and activate the software on the new OS with the same serial key.
Please Contact | Adobe to seek help on the same.
Regards,
Anubha

Video issues in mac os 10.6.4 and windows 7 64x

To start with, my computer is the late 2008 model Imac, has 3g of memory, and wasn't experiencing any video problems until earlier this month. I've already had it serviced, and was told that the issue was resolved, and was unrelated to hardware. Fifteen minutes after repair and setup, the exact same symptoms occur.
I'm thinking, Ok, perhaps this is a bad install of windows, since it happened in a windows program (everquest 2, an online game), and rebooted into Mac. Almost immediately, I saw video problems (snow, pixels, lines, distortion)on the mac side, which had occurred with the windows side.
My husband is angry, I'm angry, so I decide that I'm going to trash everything and start off completely fresh. I intended to reinstall mac 10.6.4 after erasing everything, so I removed the windows partition, and attempted to reinstall snow leapard, without using the original leapard disc that came with the system. I didn't realize until too late that I had forgotten to erase the original os, but I figured I'd see if there were any problems and go from there. I had no initial problems with the install of either os (mac or windows), except to note that I couldn't install the apple software updates on the windows side. I was able to fully update the mac side before attempting any installation of the windows os.
I started having video problems really quickly in the windows side after the full installation and update, but the system disabled the initial nvidia drivers and went to plug and play drivers. The only thing that displayed any further problems was the ISight camera, but that was to be expected without the apple updates.
I did read the bootcamp manual afterwards, and saw that my IMac, being an earlier version, might not properly install bootcamp drivers for windows 7 64x, although we had successfully located and manually installed the drivers earlier when first installing windows 7 64x. Keep in mind, I'd had the os installed for several months without any video problems, and in fact, it worked like a dream in both os after the computer had a previous repair of the hard drive, sound card, and logic board.
Anyway, to continue, after the video symptoms occurred on windows, I switched back over to mac to look for and install a video firmware download that I had located through these same forums. I had to change os because it was a dmg, so I did so. Now, I still had the snow leapard install disc in the computer, so that's the first thing I saw on the screen when booting into mac. I immediately started also seeing the pixels and some distortion, but it stopped briefly. I tried bringing up Firefox to get to the download, but the computer froze (showed the little round ball)and wouldn't respond further. I tried several reboots, and could usually at least get into snow leapard, but the computer froze each time.
Finally, after several attempts, the computer won't boot into either os, and won't go into the install disc either. I'm completely at a loss, because I'm told this IS NOT a hardware issue, and the problem was resolved with simply resetting everything. The problem was NOT resolved with that reset, because I'm able to reproduce this issue consistently with multiple reboots, and have even recorded it with a camera I have. I'm at my wit's end, because I'm on a fixed income, and this costs me time and money I just don't have. It's caused me to get behind on one of my bills, because I have to have a computer, and further repairs, while covered under warranty, are going to cost me further money to get to and from the service center. Not to mention the fact that it's going to take another month for me to wait for my money to become available so that I can pay for the ride back and forth for the repair.
Anyone, anyone at all, have any suggestions that may help? I have access to another computer, and can try using that computer to help me boot the other computer up, if I know how. Please, this is so frustrating to me, so I'm hoping someone can suggest something that may help.
I know I mentioned in the post what type of video issues I'm experiencing, but I figured I'd reiterate to make it easy. The computer will display a distorted image on bootup, like a pixelated off-center image. You know, kinda like 2 punch cards held up to each other, with the same holes, but off center. You also get snow, when able to boot up, with the screen sometimes showing half the screen, flickering. Like the screen is broken, but it's not even scratched. And it's not all the time either, if it was, I would think maybe an internal screen was broken or cracked (I've worked tech support for devices with internal screens, so I understand you can have a perfectly good outer screen, but a cracked inner screen). Right now, on bootup, I get that punch card effect, then the screen goes blank. I should mention that sometimes the system will show that, but then boot into windows with no immediate distortion, but will show distortion in the mac side if I'm able to boot into snow leapard. Hope this information helps someone give me an answer that helps.

To start with, my computer is the late 2008 model Imac, has 3g of memory …
I'm assuming you mean the Early 2008 iMac since there is no "late 2008" one. AFAIK, it came with 2 GB of RAM standard & the common BTO option would have been 4 GB, so can we assume that you have installed an aftermarket memory module to get to 3 GB?
I've already had it serviced, and was told that the issue was resolved, and was unrelated to hardware. Fifteen minutes after repair and setup, the exact same symptoms occur.
What repair and setup? Is this something you did after getting the iMac back from service? If so, what exactly did you do?
I had no initial problems with the install of either os (mac or windows), except to note that I couldn't install the apple software updates on the windows side.
Do you mean the Windows drivers or something else? Did you follow the Bootcamp install procedure exactly when reinstalling Windows or not?
I switched back over to mac to look for and install a video firmware download that I had located through these same forums.
What video firmware download do you mean? AKAIK, there are none for early 2008 iMacs.
No offense intended, but it is hard to understand exactly what you have done because while you mention much, you don't say a lot about the specifics for a lot of that. In general, it is best to concentrate on those things & keep the commentary to a minimum.

Lightroom 4.4 video issues, I think it may be a windows 8 issue.

I am not sure when this started happening or what has changed. I went to import some video and in the import dialog box all my video files show "Preview unavailable for this file" in the thumbnail in the grid view. And if I try to import them i get a dialog box with a message that says Import Results > Some import operations were not performed. > There is a problem with the video file (1) > [Filename].AVI
I am currently using windows 8 and I have imported video to this catalog before from the same camera. The video plays fine in the video players(windows media player, quicktime, and the new video app on windows 8 that is the default player in the OS).
I went throught the http://helpx.adobe.com/lightroom/kb/troubleshoot-video-issues-lightroo m-4.html and did all those suggestions. I am now turning to the forums before I reach out to support.
Has anyone else run into this issue or a simililar one that may be able to give me a workaround or solution?
I am a cloud subscriber and all my programs are up to date. Windows is current, all players are current, and this specific catalog has .AVI files in it from the same camera and the firmware on the camera has never been updated since I started shooting video.
Thanks,
Alex

I had the same problem -- also on Windows 8. I was trying to import .MOV files from an Olympus OM-D E-M5 into Lightroom and got the error you mentioned.
I believe it was a problem with my QuickTime installation. I was using an unofficial distribution of QuickTime called "QT Lite", and apparently it doesn't play well with Lightroom. Uninstalled that, installed the latest QuickTime and video imports started to work.
Unfortunately I then ran into this other problem, which sometimes causes video editing to fail: http://forums.adobe.com/thread/972420

Windows Installer repair issue for per-user folders/files

Intro:
I have doubts that this is the right place to ask about this, since this issue has existed for me on many windows platforms, please suggest where this should be forwarded if this is an inappropriate place to ask.
Please do not be confused by the directory paths for XP, this issue is also true for Windows 7.
Description:
Windows Installer does not repair files in per-user directories, such as [AppDataFolder], when initial installation is performed using system account (for example - distributing the package through SCCM or using psexec) and repairing under a user with administrative
privileges (limited user repair works fine).
Example.
.msi installation installs a custom .xml configuration file to "[AppDataFolder]". We're installing .msi by using psexec /s. log output:
MSI (s) (D8:F0) [15:19:01:214]: Executing op: FileCopy(SourceName=SETTIN~2.CON|customXML,SourceCabKey=customXML,DestName=customXML,Attributes=16384,FileSize=2633,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,,,InstallMode=58982400,HashOptions=0,HashPart1=-1992414570,HashPart2=1238809189,HashPart3=-80616146,HashPart4=146746036,,)
MSI (s) (D8:F0) [15:19:01:214]: File: c:\WINDOWS\system32\config\systemprofile\Application Data\customXML;
To be installed; Won't patch;
No existing file
MSI (s) (D8:F0) [15:19:01:214]: Source for file 'customXML' is compressed
MSI (s) (D8:F0) [15:19:01:230]: Note: 1: 2318 2: c:\WINDOWS\system32\config\systemprofile\Application Data\customXML
When a user with administrative credentials accesses the advertised shortcut repair is run on the component that has the .xml configuration file, event viewer has an entry about this.
The verbose repair log file shows the following entry:
MSI (s) (D8:E4) [15:22:27:667]: Executing op: FileCopy(SourceName=SETTIN~2.CON|customXML,SourceCabKey=customXML,DestName=customXML,Attributes=16384,FileSize=2633,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,,,InstallMode=16908288,HashOptions=0,HashPart1=-1992414570,HashPart2=1238809189,HashPart3=-80616146,HashPart4=146746036,,)
MSI (s) (D8:E4) [15:22:27:667]: File: c:\WINDOWS\system32\config\systemprofile\Application Data\customXML;
Won't Overwrite; Won't patch;
Existing file is unversioned and unmodified - hash matches source file
Limited user repair log reads:
MSI (s) (78:8C) [15:26:27:406]: Executing op: FileCopy(SourceName=SETTIN~2.CON|customXML,SourceCabKey=customXML,DestName=customXML,Attributes=16384,FileSize=2633,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,,,InstallMode=16908288,HashOptions=0,HashPart1=-1992414570,HashPart2=1238809189,HashPart3=-80616146,HashPart4=146746036,,)
MSI (s) (78:8C) [15:26:27:406]: File: c:\Documents and Settings\test\Application Data\customXML;
To be installed; Won't patch;
No existing file
Your suggestions will be very much appreciated.

Hello,
Did you ever get to the root cause of this?
I have a similar problem with a custom XML that is reported as "empty or is not a xml file." in the logs.
Wondered if you had found the root cause?
Kind regards,
Sio.

Video issues since Windows 7 installation

Similar Messages

Maybe you are looking for