Video Issues with HTML5 Output

Hello there,
I have a project with several videos on seperate slides that are located inbetween normal content slides.
Works fine with SWF output and HTML5 output viewed on the pc, but...
when I test the course on an iPad the video plays quite fine the first time I watch it.
However when I jump back to the video the screen stays black for the duration of the video.
When there is audio in the video the audio plays but the screen stays black!
What I happening here?
Someone any ideas?
Thanks in advance
Ruwen

Hello there,
Have you inserted multi slide synchronized video or event video?
and which format of video have you inserted?
Please tell the complete version of Captivate 6 (help> about captivate) and which version of iOS is it?
You can also try improve the slide quality to optimized or 24 bit in the properties of the slide (for every slide).
Thanks.

Similar Messages

Need help on resolving the issue with adobe output server - error MSG256 & MSG 210 not in .ini file

Hi,
I am using adobe output designer 5.5 for designing the label template and using the Adobe output server for printing process.
In the Jfmerge.ini we given the condition "DiscardUnknownFields=Yes" for ignoring the unwanted fields in the .dat file.
During the process, I faced some issue with the output server in printing the labels.
When the .dat file is placed in the Data folder of adobe, the label is not getting printed in the printer.
The file is move to the error folder and an error file is getting generated which contains the error message as given below:
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [256]** Message Msg256 not in .ini file **
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]** Message Msg210 not in .ini file **
2009/08/26 02:59:02 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [210]** Message Msg210 not in .ini file **
The output server is a new installtion and I verified the Jfmerge.ini file. It contains the message details of Msg256 and Msg210.
I also verified the license and it is a valid licence.
Kindly help me out in solving this issue.
Thanks
Senthil

I assume this is too late to help you, but other might need a hint. I had the same problem, and found some possible causes that I posted on http://codeznips.blogspot.com/2010/02/adobe-output-server-message-msg210-not.html.
It is quite likely that you are missing some double quotes around the path specifying the ini file (-aii), if its installed under "Program Files".
Hope this helps anyone....
Vegard

Reporting an audio/video issue with a TV show from a Season Pass? How?

I would like to report some audio/video issues with the latest The Unit and The Seeker episodes but I can't find them in my Purchase History??? I own a Season Pass for both. Any idea how to do it? I'm lost. Thanks!

Is this the lack of audio on "Shadow Riders"? I've just got to that episode, and I tried to report the problem, but the whole series of hoops you have to jump through seems to have changed. Rather than get to the page where you add comments for the problems, it merely sends you to an internet link on apple that has no bearing on the problem.
If you open your account information (store > View my account) you can click your purchase history there. The theory is that you find your program, click the arrow next to it, then click "report a problem" and it should allow you to enter a comment, or the problem... Anyone else having this troubvle?

Online video issue with OS 2.0.0.7111

I have an issue with OS 2.0.0.7111. I can only view one online video (youtube, vimeo, etc...) successfully upon which if I try to view any other video my broswer crashes and becomes unresponsive. When I close the browser the icon is permanently greyed out and the only way to get it back is to do a hard reset. I've tried doing a security wipe, reverting back to OS 1.0 then reinstalling OS 2.0 and I still have the problem. I thought it was initially a flash problem but I enrolled in the html5 program for youtube and it still occured. I recorded a video of my issue so you can have a better idea of what happens.
http://www.youtube.com/watch?v=ikkNr5J9sWU
Any thoughts on a solution?

have your tried a different wifi router or hotspot?
have you rebooted your wifi router?
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

RTF templates- Issue with inconsistent outputs

Hi All,
I have an issue with rtf templates.We are on XML Publisher 5.6.3 with EBS with Bursting.Bursting is set at G_HEADERS in the contorl file.
I am using the <?start@last-page-first:body?><?end body?> function.It displays amount total for single page output and amount total only on the last page for multiple pages output.The above logic works perfectly when I have single header data in the XML file(single G_HEADERS).
<XX_MAIN>
-<LIST_G_HEADERS>
<G_HEADERS>
Lines Data(tree sub levels)
</G_HEADERS
<G_HEADERS>
Lines Data(tree sub levels)
</G_HEADERS
<G_HEADERS>
Lines Data(tree sub levels)
</G_HEADERS
</LIST_G_HEADERS>
</XX_MAIN>
However when there are multiple headers(G_HEADERS) in the same XML data file at the same tree level, all the outputs get generated as minimum 2 page outputs.Even though the data fits in 1 page for some of the G_HEADERS, it shows continued on the first page and just prints the total on the last page along with the header.
I appreciate your help with this.
Thanks,
Lavina

Hi,
I'd like to know if anyone out there has come across this issue before..
Thanks
Lavina

Audio and Video issue with Windows 8.1 upgrade on Ideapad n585

I upgraded my Ideapad N585 to Windows 8.1 the other day, took forever, but it made it through. Unfortunately, I now get boot erors for the Dolby software, and the AMD Vision/Catalysyt Control Center. Neither of these programs are able to start, from startup or even manually. They just won't run. Sound seems to come out fine still, but I do have video issues.
First off, my computer doesn't seem to recognize a HDtv as a monitor through the HDMI port. I still get an image, but it's set to current screen resolution instead of 1080i. I tried using the detect button to force it to look for a second monitor (my TV), but it showed nothing connected, though at the time I was using two screens. Now my monitor's screen resolution seems to be a little higher than my TV's, but it doesn't fit the screen properly, and will sometimes put a black border around the desktop, not using the full screen. I have also noticed, that when plugged into the tv, if a background program like a screen saver starts (and I am one of the few people who still use them, I like BOINC, sue me), it will reset the screen resolution to what it requires. When the program exits, the screen resolution stays, and that becomes the new max screen resolution until I restart the computer. So far, it only does this through the tv, if I run the laptop monitor alone, it doesn't happen.
I did try updating the software with what's available through the support site, but nothing happened. I even went as far as to use the Windows 9x~XP standbys of completely uninstalling, manually removing everything from the system registry I could find relating to these two programs, and then finally reinstalling the software. Giving the audio and video a complete clean slate to work from, and got no positive results. I restart the computer, Dolby and Catalyst won't boot, and blind to HDtv. Problems as described above still apply.
Anybody else have this issue? Anybody got a fix?

have you found a solution to this?
My computer updated to 8.1 without my wanting it to, I have the same problems as you. I installed the video driver because the brightness was locked on what I had it. (the bar would move but did not change)
I searched for brightness and n585 and I was able to find a driver, now brightness works but HDMI still does not. When I plug in the TV both screens go black with all 4 options in the "project" screen.
*edit*
this worked for me i stumbled across this
I unplugged the power cable with the hdmi cable plugged in. Hit (windows key+p) scrolled to duplicate and it worked.I plugged in the power cord back in and it still worked.

Video issues with macbook pro

My 1 year old MacBook Pro has suddenly developed issues with playing all videos. They are very slow and stop constantly making viewing almost impossible. I have downloaded Flash player again but no help. I have strong internet via cable.

I'm also getting some really bad sound quality on facebook notifications. I've been forced to disable them they sound horrible like they are clipping.
Trying to figure out if this is a problem on all Late 2013 15" macbook pros or if mine is defective? This occurs even at around 20-30% volume levels with the Facebook notification sound problems...

Video Issues with Boot Camp / WinXP Pro

I have a MacPro 2.66, Radeon X1900 with a 23" Cinema HD Display.
The problem I'm running in to was the same one I first experienced when installing XP Pro. No video. There was a video signal to the 23" display, but I got nothing other than a black screen.
I found a solution to use a different monitor, as apparently there are some "issues" with Boot Camp and/or XP Pro and the 23" display.
The install of XP Pro went fine on a different (smaller) monitor. It's the post-install that is not working.
I got XP to boot up once or twice and all seemed to be fine.
Now, when I boot back up in to XP Pro, I get a video signal and can hear XP boot up (Nice cozy XP startup music), but I only get a black monitor screen. No video whatsoever. No posting, no nothing.
Granted, I have not done it yet, but I'm sure I can slap on the smaller tube and get XP to boot.
I'm suspecting a video driver issue with the Radeon X1900 and the 23" display, but was wondering if anyone else had experienced this problem and what the solution might be?
I'm probably going to have to wait to see if Boot Camp 1.2 fixes this issue....seeing how there is already an sata issue that needs to be addressed as well.
Any thoughts?
Michael

Well, I'm not sure what one should do if another display isn't available. But, I was lucky to have an old 17" Cinema to use instead of the 23" to install drivers with the X1900 card installed.
I went here...
https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&folder ID=293
... and downloaded their Catalyst Control Center, installed it, and went to "Advanced" to do display discovery. Then I did a full shutdown and restart.
The 23" works now. Though, as others have said, it's black until just before the XP desktop loads (as I assume the drivers load with the desktop).
Aside from it being a pain to get working on XP, the card screams (on both platforms)! There is a slight bit of fan noise which is pretty subtle and only seems to rev on startup/self-test but so far it's definitely worth it. I didn't think it'd be observable outside of 3D apps but with Mac OS GPU acceleration even Tiger seems faster!

Issue with query output

hi there,
I have an issue with the display of hours 00:00:00 in the query output in BW.
The system assumes it as 0 or blank and therefore display it under unassigned hour.
I am using the reference of 0TIME for this hourly display.
When I checked the 0TIME i could not find the corresponding SID value for 00:00:00 hours.
Can anybody please advise what needs to be done?
Thanks in advance,
Kind regard,
Kate

Hi Kate,
I am experiencing the same problem as you: an InfoObject, created referencing 0TIME, represented in the BEX Query as "#" when the Value is "00:00:00".
How did you work it out?
The Formula Variable strategy is not applicable in this case because 0TIME is not a key figure !
Bye
Aldo

Strange issue with PO output

Hi All,
I have an issue with PO form.
It is Sapscript. After transporting the form to quality system for second time, I noticed in the output that Only for one window the output was not as per the code. I checked in SE71, new code was there but when I checked in debugger mode(while displaying the form via ME23n) the old code was still there. For other windows the code is just fine.
It seems quite strange to me.
Please let me know if anyone has a clue.
Thanks!
Regards
Archana

Hi
Check in DEV system whether the code is removed or commented properly.
Activate again and Re import
If you have access to SE71 in QAS (rarely), then check the script code.
Shiva

Strange issue with cvs output

I have a report that works fine.
in the report I have the cvs enable output turned on.
when I click on the link to get the output and it opens in excel, all the columns are there, but one of the columns has the header but is blank on data. in the screen report its there, but not in cvs. has anyone see this type of issue before?

I have seen odd behavior like this, not this one exactly, when downloading reports to csv. I found that if the data in a column has certain characters, it would mess up the layout of the csv report. These characters were usually "non-printing" characters that were in a certain cell. The one that messed my report up was the character that indented the data within a cell. I also had intermittent issues with double quotes in the data and "soft" line breaks in the data (entered by pressing ALT-Enter key sequence in the original spreadsheet that we had uploaded). Open the csv file in an editor like Notepad++ or even MS Word. and see if you can figure out what is going on. Look carefully in the area where the discrepancies first apear; it could be coming from another cell.

Issues with PDF output

Hi,
I have a report registered for language=English and territory=Netherlands. But when I run the report, I cannot see the output. I get the following message:
"Unable to find published output for this request"
The report fetches data and creates the XML correctly. I have registered the template with Language = ENglish and Territory = Netherlands. I run the above report from a Netherland installation.
Any pointers how to debug this.
Thanks,
Ashish

Hi Aashish,
I suggest you to check the RTF Template of your report ....as if your xml output file on submit request form--->diagnostic --->view xml ...is generated ... it means that your data defination file is perfectly fine but there is issue with your rtf template....may be some of grouping or tag is not put properly...
one thing i want to suggest you to pls save that data file as .xml extension and upload in rtf u designed on youe desktop.... check theprview if its coming fine or not.
let me know if u still facing the same problem.
regards
Ratnesh P

My visit to the Genius Bar regarding video issues with Leopard

Having video hang up issues with imove 08 and viewing videos on my webgallery. We opened a video on my web gallery on 3 computers with Leopard and two computers with Tiger at the Genius Bar. The Tiger machines allowed immediate playback where the Leopards took 3-5 minutes to view. Crazy!
Also noticing fickering with my footage in imovie 08 which I never had with Tiger. Plus when I delete a clip in my project, my workspace goes completely black and I must go into another project open it, then back to the first project and it reappears....Very frustrating.

DVD Drive is dead. Hopefully was the issue.
Thanks for all the input

Known "stutter" issue with HDMI output of standard def DV?

Standard def 60i material, via a Geforce 660 ti and HDMI out, has motion artifacts -- readily seen on pans. Doesn't look like reverse frame order, but the motion stutters a bit.
Is this a known issue? Thanks all.

I wanted to reply that I just discovered that my Lenovo AIO no longer likes my converter. I'm not sure why as I have proven that it works by using it on another device. The other device is a laptop running Windows 7 Pro.
On a haunch, I plugged in my HDMI TV which has a native HDMI connection and it WORKED. So, I suppose I'm back to the drawing board and this is indeed not a Lenovo hardware issue.
Does anyone know of any issues with using a HDMI to VGA converter on a Lenovo B540 AIO? Link below:
http://www.startech.com/AV/Converters/Video/HDMI-to-VGA-Adapter-Converter-for-Desktop-PC-Laptop-Ultr...
I have the one above but I just noticed there is a HD2VGAE which I'm not sure what the difference is.
Thanks!

Issue with HTML5 video not playing

Hi,
I've set up a simple HTML5 video test in Dreamweaver CS4. I pulled the code needed from the W3 schools site:
http://www.w3schools.com/html5/html5_video.asp
After making a few adjustments in my code for file path and dimensions, I uploaded the clip and web page it to my server. Here is the result and I'm having trouble with browsers; in Chrome it plays great; in IE 9, the video is jerky and the toolbar does not have the fullscreen option like in Chrome:
http://designerandpublisher.com/multimedia/5/video.html
I also uploaded everything to a second server, one completely different than the one above. The result is worst - again, the video plays fine in Chrome, but in IE9, the video does not even show up at all. See below:
Does anyone know how to resolve this? Thanks.

In the end, you should end up with a piece of code that looks something like this:
<video id="YourID" width="600" height="400" preload="auto" autobuffer autoplay controls>
<source src="YourVideo.mp4" type='video/mp4; codecs="h.264, aac"' />
<source src="YourVideo.webm" type='video/webm; codecs="vp8, vorbis"' />
<source src="YourVideo.ogv" type='video/ogg; codecs="theora, vorbis"' />
<object width="600" height="400" type="application/x-shockwave-flash"
    data="flowplayer-3.2.7.swf">
    <param name="movie" value="flowplayer-3.2.7.swf" />
    <param name="allowfullscreen" value="true" />
    <param name="flashvars" value='config={"clip": {"url": "YourFullVideoPath.mp4", "autoPlay":false, "autoBuffering":true}}' />
    <p>Download video as <a href="YourVideo.mp4">MP4</a>, <a href="YourVideo.webm">WebM</a>, or <a href="YourVideo.ogv">Ogg</a>.</p>
</object>
</video>
This has all 3 video formats and a Flash fallback that plays the mp4.
I use http://www.mirovideoconverter.com/ to convert to all the formats required, which I just realised Jon has already mentioned. It's a very easy converter.

Video Issues with HTML5 Output

Similar Messages

Maybe you are looking for