Video jumps into corner when full screen enabled

When I try to switch a video (it doesn't matter what format) into full screen mode, the video jumps into the upper left corner of the screen so that only a corner of the video can be seen. I have tried reinstalling Media Player, and my graphics drivers are up to date. Any ideas on how to fix this?

what features make adope playe better then media player? and which formats dose it supports?
Download Islamic Books

Similar Messages

Watching video clips on web page full screen

how can you watching video clips on web page full screen?

Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

Can't set window's title when full screen

Hello. I have seted window's title in Property Inspector, but
it isn't show it on the system Toolbar when full screen publish
setting.(Director 11 )
But it's OK when It isn't full screen.
Thanks.

what do you not understand in the mode "FULLSCREEN"????
Wolfgang
(full scream)

Video intro slow when full screen

The avi runs great even in authoring mode. Movie and avi is
1024x768. Also runs smooth when running movie.exe as long as it is
run from a window. When I make the movie go full-screen (using an
xtra), the avi has a lot of stops/starts (stutters) and is not
running at full fps. All other parts of my movie run fine at
full-screen. I can't figure out why it slows down to a crawl at
full-screen mode.
Anyone know what the problem is?
Thanks!

Your processor/video card doesn't have enough horsepower to
play the movie. Remember that you are running the digital video
player inside Director, and so Director takes some of the
computer's processing away from the dv player. You may be able to
solve the problem by lowering the data rate of the video, or by
changing the codec altogether. If this dv file really is an AVI
then you are far better off by changing to another, more modern,
file type.

Imovie'09 crashes when full screen preview of project

Hello,
When I try to preview a project that I made in full screen, the application crashes. Is this a problem with the application or the OS?
Thanks for you suggestions.

@thomasfrommaitiand -- are you referring to the projects when you say left side of my screen?
I will share my findings.
I cleared my issue basing on inputs that I received from this thread https://discussions.apple.com/thread/3343087?start=0&tstart=0
Basically, I had to duplicate my project so that I do not loose my original version and then started deleting each clip, audio overlays, transitions from the project one by one. I had photos interlaced in my project along with the video and some audio clip overlaying the video.
Luckily about 1 minute int the project, I identified that a Title slide that I had inserted into the project was causing the full screen to crash. Once I deleted that 1 slide, I was able to run my project in full screen without any issues. It is quite cumbersome and manual especially if you have multiple pieces in your project. However, you are desperate to have your project working like mine, this is the only best solution that I could garner. However, I also followed the instructions from the above mentioned thread posted by "elikness" and deleted the imovie.plist. That didnt really help but I followed those instructions too.

Videos no longer play in Full Screen-why?

My music videos and movies no longer play in full screen. I don't know what I did wrong, but I'll tell you what I did right! They've been playing correctly, and today I went to play a new music video i downloaded from iTunes and I noticed it was a small thumbnail. I checked the others and they all played back the same. I went to my iPod settings to ensure that I had it set up to play in full screen. Can someone help and tell me what (if anything) I've done wrong? Thanks so much. Lori

Hello,
Thank you for contacting Mozilla.
I understand that you are having problems with playing videos on Firefox for Android. In order to better understand and investigate on the issue that you are encountering, please reply to this message with the following information:
* What is the manufacture and model of your phone?
* What is the Android version of the phone?
*What version of Firefox do you currently have?
* Please provide the exact steps to reprodcuce the issue you are encountering.
*Are you encountering an error message? And are you able to provide a screenshot?
Please be sure to include as much detail as possible, including any websites that may exhibit this issue, and any error messages that you may be receiving, exactly as they appear. This will ensure that we will have all the information needed to investigate into this. Thank you for your help and we look forward to hearing from you!

Flash player skipping audio when full screening

Hi, whenever I full screen or go out of fullscreen using flash player, youtube or twitch.tv, the audio stops for like 1 second, and then resumes. This is extremely irritating and has caused me to use Chrome for the last few years, even though I like Firefox better. Is this something that is fixable?

This problem is not with firefox, problem can be with some extension.
Press Ctrl+Shift+ A and disable flash player plugin , restart Firefox, then check youtube, if audio still lags.
Firefox had got cisco video codec which is enabled by default. it is HTML 5.
if problem still exist. follow these steps.
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
* Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
* Do NOT click the Reset button on the Safe Mode start window
* https://support.mozilla.org/kb/Safe+Mode
* https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Hotshot video conversion resolution? No full screen ever?

I have the Pantech Hotshot. The screen resolution of the phone is 400wide x 240high. When I convert a video to that resolution the phone always reduces it to 320 wide instead of filling the screen to the 400 wide and makes the 240 high even smaller. If I convert the video to a larger size it makes the video on screen even smaller. The only video resolution that works decent is 320x240 which fills the screen top to bottom but leaves black bars right and left. If its the phone software that's doing it than what's the point of having a screen 400x240 if you can never view a video in that screen filling resolution? And the video player has no option to zoom or fill the screen. What is the best resolution to convert a video to view on this phone to fill the screen completely like every phone I've ever had was able to do? Thanks

"The screen resolution of the phone is 400wide x 240high. When I convert a video to that resolution the phone always reduces it to 320 wide instead of filling the screen to the 400 wide and makes the 240 high even smaller. If I convert the video to a larger size it makes the video on screen even smaller."
I think you have not found the solution to your situation. We have a non-smartphone (Samsung u370) that, like your phone, has a screen resolution of 400x240 and, like your phone, seemingly won't play a video at the correct resolution when the video is a resolution that exceeds 320x240.
On this u370 phone while playing a video, there are icons on the screen one of which looks like an "X" with arrows at the end of each of the ends of the "X". Tapping this icons causes the video player to expand the video so that now it's playing at the full horizontal resolution of 400.
The video player on our flip phones works the same way. Our LG vx8370 has a 320x240 screen. When I play a 320x240 video, initially the video players plays the video at a resolution of 240 x something. When I push up on the directional pad, then the phone expands the video and then plays it at 320x240.
One more thing. My experience on two different Verizon non-smartphones is the same when it comes to playing widescreen videos -- when I play a video of a resolution such that I have to select the option to expand the video so that the video is playing at the full horizontal resolution of the video, the video player won't show the correct vertical resolution of the widescreen video. Instead, the video player stretches the video to fill the vertical resolution of the phone's screen. While that is tolerable to me for a 16x9 video, my preference is that I find a stretched 2.35:1 video to look unwatchable. The only way that I can preserve the aspect ratio of the widescreen video is to use a video conversion tool that lets me pad the video with blank lines. FFmpeg and mencoder are two tools that have this padding option. So this is what I came up with. Suppose I have a 16:9 widescreen video. The video would need to be about 400x224. Since the video player software on the Verizon non-smartphones will play incorrectly by showing a video stretched to fill the whole screen, I'll need to use the padding command in ffmpeg and add 16 blank lines -- 8 lines above the video and 8 lines below the video. The ffmpeg command for that is
scale=400:224,pad=400:240:0:8
ffmpeg will scale the video to 400x224. The pad command tells ffmpeg that the converted video will have a total of 240 vertical lines of which 224 are the video and 16 of which are blank lines. The "8" tells ffmpeg how to center the video -- there'll be 8 lines above the video and 8 lines below the video.
Since ffmpeg uses a command line interface, two free graphic user interfaces for ffmpeg that I like are Avanti and Pazera:
http://www.videohelp.com/tools/Avanti
http://www.pazera-software.com/products/audio-extractor/
Pazera uses an older version of ffmpeg which can be updated after installing pazera by, if I remember correctly, just deleting the older ffmpeg file and replacing it with the new one.

Why No Picture When Full Screen Button Is Pressed?

When I open up IPhoto all the thumbnails load OK. Yesterday I tried to show my grandson some of his younger pictures taken 3 years ago by hitting the Full Screen button. What we saw was a dotted frame with an exclamation mark inside. To my dismay many of my older pictures display the same thing. How do I solve this problem?

If you deleted pictures then you moved and altered things. Then rebuilding won't work.
You'll need to create and populate a new library.
To create and populate a new library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Remember: It is strongly advised that you do not move, change or in anyway alter things in the iPhoto Library Folder as this can cause the application to fail and even lead to data loss
You do everything in the iPhoto Window - there is simply never a need to do anything in the iPhoto Library Folder. Ever.
To delete pics: in the iPhoto Window put them in the iPhoto trash and then go iPhoto Menu -> Empty Trash. This removes pics from the Library and the HD.
REGARDS
TD

Second screen blacked out when full screen with dual displays

I have a MacBook Pro connected to an LCD display. I use both screens. When working from home I'd like to have my local machine showing on the LCD monitor and my work machine showing in the MBP screen. I can do this, however I can't have the work machine in full screen mode because ARD blacks out my main LCD monitor. This frankly drives me nuts as there doesn't appear to be a preference within ARD to change this.
iTunes does the same thing. If I want to watch a video full screen in one monitor it blacks out the other. C'mon Apple, Quicktime doesn't do this and has a preferences tab just for display settings!
Does someone have a suggestion, work around, or want to point me to what I might be missing to solve this issue?

I understand what you are doing, but when you are running as full-screen the second display is blacked out because your making your station only the target at that moment. You are telling ARD that you want nothing to do with your Admin station. Also because the target doesn't have a second screen, your is blank. This avoids any confusion as to what screen belongs to what machine. ARD is working as it was designed to.
iTunes does the same thing to hid extra screens that are not part of the presentation so they don't detract from the show.
With your Observe or Control in Windowed mode, make the window of you client to fill the display as much as possible. This is the best you can do. Besides, when you are Controlling a client in Full-Screen, you can't move files and such with drag-n-drop. So if you want to work on both at the same time, you need to stay in windowed mode.
If you would like to make the petition to have your idea supported, do so here

Another problem I need help on....trying to watch video on laptop using a full screen.

Yep..heres another problem I have...I am trying to figure this out. I want to watch a video or a movie and I can't seem to watch it at full screen capacity....I only am able to watch it on the little box...when I put it for full screen it shows nothing...just a blank grey colored dull mess. I can hear the movie or video playing but no picture. Please if anyone knows what the deal is can you please respond to my problem.

In addition to the (very critical) information Smithy asked for, are you using a "slightly unusual" configuration such as an external monitor on a laptop?
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Tabs When Full Screen in Lion?

When running Safari in full screen mode on Lion it looks like there's no way to open multiple pages (tabs) at once?

Navigate to maps.google.com, then click the small arrowhead that points left to hide the Google Maps sidebar (it's located just to the right of the Print and Link buttons). Then, click the Full-Screen button in the top-right of your browser window (Lion has full-screen apps, right?). That'll get you pretty darn close to full-screen Google Maps as I can think of.

When full screen - where is the Styles Drawer?

Hi -
I was exploring IBooks Author and having a ball. It looks great in full screen mode.
What I can't figure out is where the Styles Drawer is supposed to be when in full screen mode? I know where it is in normal viewing mode but it can't be reached in that spot when FS.
Is there a trick to it or just something Apple missed.
TIA your input.
J2

By design, items hung outside the primary window are disabled. Use the built-in menus are needed and if you like, feel free to request a different option, etc, via iBA's Feedback menu.
My advice, tho is to use the biggest monitor you can and more than one if possible

CS4 video jumps and shakes when exporting to any video format

Hi,
I created a project in CS4 and exported the video into a Mpeg2 format and the video skips/jumps/shakes instead of playing continuously. When I test the project inside the project the video plays fine. What could be causing the problem. Please help!!!!!
Bhavani

Some suggestions

Mouse pointer jumps to corner of secondary screen

We just upgraded to a new server running the latest Solaris with Sun VDI 3.1 which includes Sun Ray Server Software 4.2. I have multihead enabled and have 3 stations with dual-monitors/Sun Rays. On the second monitor, especially when dragging or scrolling, the mouse pointer jumps to the top-left of the screen. All three of us are experiencing this. Two have xinerama extension enabled, one does not have it enabled and says he's seeing the same behavior with the mouse. We have mix of Sun Ray 1G's and 2's, and one I'm using is a 170. I did not experience this with our old server running SRSS 3.1. Anything I can do to fix this problem? I appreciate any help.

demmeister wrote:
Do you know when the next patch is due?Patch schedules are highly unpredictable. This patch is now in what's supposed to be its final QA cycle but if QA finds problems, or if a serious new issue is reported (especially if it's a security issue) then the whole thing might have to be rebuilt and possibly resynchronized with other patches in progress, and then retested on all supported platforms (which means reassigning QA resources that had been committed to other efforts). The best case for this patch that has reached this stage of the process might be two or three weeks. The worst case could be a month or two.
Alternatively, is there a hotfix available as many of our users are having difficulty at the moment.If you have a support contract then you can open and escalate a support call against the bug. After the escalation has been filed you can request an "IDR" ("Interim/Diagnostic Relief"), which is essentially an early build of the patch that contains the intended fix for that bug. The IDR will not have been tested by QA so there's some risk involved in taking it. This is one reason why we don't routinely publish IDRs. You have to decide whether that risk is outweighed by the pain the bug is causing.
OttoM.
Disclaimer: I work for Oracle, but I do not speak for Oracle.

Video jumps into corner when full screen enabled

Similar Messages

Maybe you are looking for