Video/LCD config problem with x86 Sol 10 EA
I'm trying to install Sol 10 EA and the video card/screen keeps
defaulting to the minimum LCD size of 720x400,
instead of the configured size of 1280x1024.
The Solaris 10 installation says "VESA No Matching Modes".
If I set it to 640x480 the sunwindows comes up o.k.,
but does not set the LCD, so the LCD goes to the default size
of 720x400. The installation assumes a much larger size, and are
thus truncated, leaving the windows so small it is impossible
continue the installation.
The NEC manual has no way to manually override the screen size.
Hardware:
Asustek A7V400-MX
NEC LCD71V 1280x1024
'kdmconfig' shows:
Video Device: XF86-VESA VESA-compatible video cards
Screen Size: 17-inch (43 cm)
Resolution/Colors: 1024x768 - 256 colors @ 75Hz
Monitor Type: Plug and Play Mfreq 17 Inch NEC661D (up to 1280x1024 @
The only way to successfully install the system is to use the
Text-Only installer, and 'Bypass & Supress' any attempted usage of
kdmconfig. After installation, if I run kdmconfig, and get the same
problem. I want to be able to run X-Windows in 'init 2' mode.
Now all I can use is the console.
Any suggestions ?
R.
The installation assumes a much larger size, and arethus truncated, leaving the windows so small it is impossible
continue the installation.
I have seen this before with a build 63. Is yours b63?
Changing "virtual screen resolution" might help, though it did not do anything for my case.
"VESA No Matching Modes".
Video Device: XF86-VESA VESA-compatible video cardsOn b63, it is known that there are issues with some video drivers.
A possible workaround is to use XF86 drivers, so maybe use some non-vesa driver.
Text-Only installerUsing this method where you able to install all CD's?
Hope this helps you.
If not check if your hw is compatible (hcl) or wait for the next beta-release.
Awaiting your answers and results.
Eric
Similar Messages
-
Video/LCD config problem with Sol 10 EA
I'm trying to install Sol 10 EA and the video card/screen keeps
defaulting to the minimum LCD size of 720x400,
instead of the configured size of 1280x1024.
The Solaris 10 installation says "VESA No Matching Modes".
If I set it to 640x480 the sunwindows comes up o.k.,
but does not set the LCD, so the LCD goes to the default size
of 720x400. The installation assumes a much larger size, and are
thus truncated, leaving the windows so small it is impossible
continue the installation.
The NEC manual has no way to manually override the screen size.
Hardware:
Asustek A7V400-MX
NEC LCD71V 1280x1024
'kdmconfig' shows:
Video Device: XF86-VESA VESA-compatible video cards
Screen Size: 17-inch (43 cm)
Resolution/Colors: 1024x768 - 256 colors @ 75Hz
Monitor Type: Plug and Play Mfreq 17 Inch NEC661D (up to 1280x1024 @
The only way to successfully install the system is to use the
Text-Only installer, and 'Bypass & Supress' any attempted usage of
kdmconfig. After installation, if I run kdmconfig, and get the same
problem. I want to be able to run X-Windows in 'init 2' mode.
Now all I can use is the console.
Any suggestions ?R.
The installation assumes a much larger size, and arethus truncated, leaving the windows so small it is impossible
continue the installation.
I have seen this before with a build 63. Is yours b63?
Changing "virtual screen resolution" might help, though it did not do anything for my case.
"VESA No Matching Modes".
Video Device: XF86-VESA VESA-compatible video cardsOn b63, it is known that there are issues with some video drivers.
A possible workaround is to use XF86 drivers, so maybe use some non-vesa driver.
Text-Only installerUsing this method where you able to install all CD's?
Hope this helps you.
If not check if your hw is compatible (hcl) or wait for the next beta-release.
Awaiting your answers and results.
Eric -
Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3. Flash palyer 10.2 was the last version without the listed problems.
For anyone interested you may see here what 'ringing artifacts' means : http://en.wikipedia.org/wiki/Ringing_artifact
More about Image artifacts/errors related to video scaling here : http://en.wikipedia.org/wiki/Video_scaler
Test configuration :
Windows 7 x64
Intel HD Graphics with lastest available drivers from manufacturer.
Any solution from Adobe?Could you please open a new bug report on this over at bugbase.adobe.com? Please post back with the URL so that others affected can add their comments and votes.
Thanks,
Chris -
Hi,
When viewing a video in combination with data channels (we have 3 EEG channels, tdm data, that we watch in parallel), diadem crashed rapidly when playing the video and data together in Diadem 10.1 and 10.2. We do not have any problems with Diadem 10.0. so we keep on using the older version to avoid any troubles. This just to notify, since other people may have the same trouble.
Cheers
ElseHi Else,
We'd really like to reproduce this problem and get to the bottom of what is causing it, so that you could upgrade in the future. Would you be willing to send me a data set consisting of your TDM, TDX, TDV, and video file? You can either post here or send it directly to my email at:
[email protected]
Thanks,
Brad Turpin
DIAdem Product Support Engineer
National Instruments -
Video/Audio Connection Problems with 10.4.5
I'm experiencing problems today using iChat to connect with another Mac user. I've been connecting to this user with no problems and then tonight, I could only text chat. When I accept an incoming video chat it appears to be connecting and then I get a message saying I've left the chat. On the other end, they get a message saying I didn't accept. The opposite happens if I initiate the video chat. No luck either with just audio.
Unfortunately, I have two variables and I'm not sure which one is the culprit. This afternoon my system updated to 10.4.5. As part of that update, there apparently was a change to iChat but there isn't any documentation. My other variable is that I also switched from my cable modem provider to DSL. I originally thought it was a DSL issue but have followed all the steps I could find to take the DSL modem out of the equation. I'm using BellSouth for DSL and a Westell 6100 modem. I've set the modem to bridge mode and disabled DNS so that my Airport Extreme is handling all those duties. As far as I can tell, the Westell is only acting as modem and Airport is doing the rest, just as it did when using the cable modem.
Unfortunately, I'm still not connecting. While I didn't get a chance to test the DSL prior to the 10.4.5 update, I'm wondering if there's a problem with the update since it did have an iChat component. The other Mac user is still on 10.4.4.
Anyone have any ideas?Hi Eric,
I would stop and actually check the Airport is getting the Public IP address.
Open Airport Admin Utility for the Applications/Utilities folders and log on
Go to the Internet Tab.
This should be set to the connection Type of the ISP and show DNS Subnet and IP details.
The IP details should be the same as what you see when you go here http://www.myip.dk/
It might also pay to try without the Airport first and check if the modem is in fact the problem (or at least the ports or Firewall), despite what you think you have set. -
Video playback causing problems with SBLi
I have a Sound Blaster Li've! x-Gamer, and a NVidia GeForce2MX400 video card. In my old system (Win98SE, PIII) they worked great. I've installed them in a new system (XP SP2, P4), and am having problems when playing back video files or DVD's. As soon as the movie starts I get static and pops from my soundcard. I've stripped the audio from my AVI files and played them separately, both mp3 and wav and have no problem. As soon as I introduce the video to the mix, it craps out again. I've run several different players (WMP 0, NERO ShowTime), and get the same problem. It also happens during games. I have turned the hardware acceleration down on both cards with no effect. Help please!!
<OMG !! I've got the same problem (isn't the most using sentence on this forum?)
OK for serious i've got similar problem
Now i've got: SB Audigy Platinium (model SB0090), Ati Radeon X800 XT ICEQ2 (256MB GDDR3 - rulez!), P4 3,00GHz, ,0GB RAM, motherboard Abit IC-7 v., Windows XP HE SP2.
On my old system (motherboard Albatron(intel PX865PE), XP HE SP2 or XP Me, Intel Celeron 2.0GHz, Radeon 9550) everything was alright.
What's wrong: <FONT color=#3366ff>during playing video files or DVD's (any kind of player) everything is alright until i do something with my voice volume (increase, decrease) then ofcourse sound goes increase or decrease but when i STOP, PAUSE, MOVE SLIDER FORWARD or BACKWARD on the player then my sound goes back to the volume i start watching the movie. Even when i turn off the sound and do any of actions mentioned below on my player, the sound also goes back to the volume i start watching the movie and i have to move the volume slider to the desired effect again.
Ok i can get used to it (and i almost did) but (!):
<FONT color=#3333ff>During playing mp3, wav, etc i don't have this problem with volume slider but my system boot up itself. I'm listenig the music and BUM! my computer suddenly restart (it's annoying - u know grhgrh).
I try to turn off my SB Audigy in my system properties and turn on my onboard RealTek AC'97 and everything was okey. I got this problem only with my SB Audigy. I could use my onboard RealTek AC'97 but let it face - the sound it's not so good (or maybe i'm wrong?)
<FONT color=#3300cc>Can anyone help me with this? ..::P.L.E.A.S.E::..
And one more question - no one could find answer for this question since october last year?!
PS. Sorry for my english -
MS6712 Video and LAN problems with Windows 98SE
Can anyone help please with a problem that’s been baffling me for weeks.I
The computer in question is a TIME Powerstation with AMD 2600+ processor with 1024MB RAM, Nvidia Geforce FX5200 and Windows XP Home.
Have set this computer to Dual Boot to Windows 98SE (Using Acronis OS Selector software).
My problem is that after many attempts, have so far been unable to successfully load drivers for the Nvidia GeForce FX5200 graphics card or to get the LAN function to work in Windows 98.
For the graphics card have tried a number of the more recent Nvidia Detonator Win98 drivers, all have either produced an error message (‘While initialising device IFSMGR: Windows Protection Error’) or a blank screen. Necessitating reverting back to the Standard VGA Driver with its maximum of 16 colours! The LAN function does not work at all in Windows 98SE, though it does in Windows XP – again suspect a driver problem.
The motherboard of this computer is a MSI Microstar MS6712. Have tried the ‘VIA Chipset 4 in 1 Driver’ to no avail. Are any more/different drivers required for Windows 98SE?
Would appreciate any advice in what originally was envisaged as a simple task: getting Nvidia Geforce FX 5200 graphics card and the motherboard’s built in LAN to run correctly on Windows 98.I have your board.
1. Windows 98 won't recognize more then 512MB of RAM.
2. I had problems with the FX 5200 Ultra on this board. Occasionally when I booted the system, I would get a black screen right after the post when the OS was about to load. I've been hearing a few people lately stating problems with the KT4V-L mobo and the FX 5200 Ultra. I promptly returned the card and got a Radeon 9700 Pro instead. I have never been more happy since I made that decision. I will never put another Nvidia card in this mobo again. I also had issues with the Geforce4 MX card I had. I've come to the conclusion that Nvidia sucks.
3. Make sure your BIOS is updated to 1.9, and al lyour VIA drivers are updated. That may help you too.
That's all I can offer. -
Servlet streaming video to client, problem with Movie not loaded.
Ok, I am sorry if this question is beyond the scope of Servlets/Java or J2EE but I figured it was worth a shot:
I have two servlets, one is a very simple class consisting of a doGet which just calls doPost and the doPost which just plucks out a single parameter from the request and prints out some HTML. Here is the code:
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
String videoDir = request.getParameter("directoryofvideo");
response.setContentType("text/html");
PrintWriter out = response.getWriter();
if (videoDir==null||videoDir.equals("")||!new File(videoDir).exists()) {
out.println("<script type=\"text/javascript\">alert(\"There was an error locating the selected videos\");</script>");
//return;
out.println("<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01 Transitional//EN\">");
out.println("<HTML>");
out.println(" <HEAD><TITLE>A Servlet</TITLE></HEAD>");
out.println(" <BODY>");*/
out.println(" <object id=\"player1\" width=\"480\" height=\"360\" data=\"/MyApp/serveUploadedFile?url=//ns20/data3/Video/player_flv_maxi.swf\" type=\"application/x-shockwave-flash\">");
out.println(" <param value=\"/MyApp/serveUploadedFile?url=//ns20/data3/Video/player_flv_maxi.swf\" name=\"movie\"/>");
out.println(" <param value=\"true\" name=\"allowFullScreen\"/>");
out.println(" <param value=\"configxml=/MyApp/serveUploadedFile?url=//ns20/data3/Video/1.xml\" name=\"FlashVars\"/>");
out.println(" </object>");
out.println(" </BODY>");
out.println("</HTML>");
out.flush();
out.close();
}In case that is hard to read, the HTML printed is this:
<object id="player1" width="480" height="360" data="/MyApp/serveUploadedFile?url=//ns20/data3/Video/player_flv_maxi.swf" type="application/x-shockwave-flash">
<param value="/MyApp/serveUploadedFile?url=//ns20/data3/Video/player_flv_maxi.swf" name="movie"/>
<param value="true" name="allowFullScreen"/>
<param value="configxml=/MyApp/serveUploadedFile?url=//ns20/data3/Video/1.xml" name="FlashVars"/>
</object>The second servlet, appropriately named: serveUploadedFile, reads in from the file off the file system and streams the data back to the client and I know it works because I can hit /MyApp/serveUploadedFile?url=//ns20/data3/Video/player_flv_maxi.swf and get the swf player but if you'd like to see the code I can copy and paste that in here as well.
The problem is by page loads blank, all the html is written but in firebug the only thing actually downloaded to the client is the first swf player, and if I right click in the window it says "Movie Not Loaded" on Firefox, IE and Safari. I have a working example of a video that is hosted on our NAS with the exact same HTML (which is where I got that from) except the swf and xml files appear as just their names because they are in the same directory as the index.html.
Any ideas?
Thank you so much in advance.Also, I realize the parameter is not being used here that is because in order to eliminate possibilities of the problem I hard coded the path into the println statements and I am sure the path and all the files exist as well ;)
-
Installation/Config Problem with Sun Directory Server Control Center (6.0)
Hi All,
I have recently attempted an installation of Sun Directory Server EE 6.0 on a x86 Solaris 10 machine.
I have selected to install Core Directory Server and Sun Directory Server Control Center with my installation.
After installation, if I check the status of the SUNDSCC, I receive the following message:
bash-3.00# ./dsccsetup status
DSCC Application is not installed
DSCC Agent is registered in Cacao
DSCC Registry has been created
Path of DSCC registry is /var/opt/SUNWdsee/dscc6/dcc/ads
Port of DSCC registry is 3998
I have also tried to re-start the Sun Java Web Console using the /usr/sbin/smcwebserver start command but that does not do anything.
If i try to initialize the SUNDSCC usin the ./dsccsetup initialize command, the registry got created, but it still displays as "application not installed".
I do not understand. I have already installed this application using the JES installer.
please help!
Regards,
Saahil GoelI had a similar issue. Here is how I fixed it.
Run dsccsetup status with the -v option. it will show you where it is trying to find the DSCC Application. Then do a find on your system to see where it is actually installed. Then simply copy it over to where dsccsetup is looking for it. Then do dsccsetup initialize. Below is what it looked like on my system when I did it:
# ./dsccsetup status -v
## /usr/sbin/smreg is present
## /usr/sbin/smcwebserver is present
## /opt/server/sun/dscc6/dccapp is MISSING
DSCC Application is not installed
## /opt/sun/cacao/bin/cacaoadm is present
## /opt/server/sun/dscc6/lib/jar/nquickmodule.jar is present
## Running /opt/sun/cacao/bin/cacaoadm list-modules -r
DSCC Agent is registered in Cacao
## Running /opt/sun/cacao/bin/cacaoadm status
## Running /opt/sun/cacao/bin/cacaoadm list-modules
## Running /opt/sun/cacao/bin/cacaoadm get-param network-bind-address
## Running /opt/sun/cacao/bin/cacaoadm get-param jmxmp-connector-port
## /opt/server/sun/ds6/bin/dsadm is present
DSCC Registry has been created
Path of DSCC registry is /var/opt/sun/dscc6/dcc/ads
Port of DSCC registry is 3998
# find / -name dccapp
/opt/server/dscc6/dccapp
# cp -R /opt/server/dscc6 /opt/server/sun
# ./dsccsetup dismantle
DSCC Application is not registered in Sun Java(TM) Web Console
Unregistering DSCC Agent from Cacao...
Deleting DSCC Registry...
All server registrations will be definitively erased.
Existing server instances will not be modified.
Do you really want to delete the DSCC Registry ? [y/n]y
Server stopped
DSCC Registry has been deleted successfully
# ./dsccsetup initialize
Registering DSCC Application in Sun Java(TM) Web Console
This operation is going to stop Sun Java(TM) Web Console.
Do you want to continue ? [y,n] y
Stopping Sun Java(TM) Web Console...
Registration is on-going. Please wait...
DSCC is registered in Sun Java(TM) Web Console
Restarting Sun Java(TM) Web Console
Please wait : this may take several seconds...
Sun Java(TM) Web Console restarted successfully
Registering DSCC Agent in Cacao...
Checking Cacao status...
Deploying DSCC agent in Cacao...
DSCC agent has been successfully registered in Cacao.
Choose password for Directory Service Manager:
Confirm password for Directory Service Manager:
Creating DSCC registry...
DSCC Registry has been created successfully
Hope this helps. -
Video play: having problems with certain files.
I am unable to play certain videos on my Macbook.
I have installed flip4mac, and it shows as a plugin on Safari.
I have installed WMV 9.
I have installed JAVA.
I have all current OSX and Quicktime updates installed.
An example of a video that I want to play, from tv station KWTX.COM, looks like this:
javascript:playVideo('1245766',%20'Heart%20Health%2002.15.07',%20'v',%20'Health' ,%20'95167',%20'Health',%20'fvCatNo=&backgroundImageURL=',%20'ww2.KWTX.com');
I'm stumped. I don't know what to try next.
Any help appreciated.Matthew
I believe this forum is appropriate for your question.
Your symptoms sound like an issue with negotiation of segment size and fragmentation. Path MTU Discovery is generally used in setting up a TCP connection to discover the largest frame that can be sent without requiring fragmentation. However there are things that can prevent PMTUD from working properly. Most especially there are some networks that block the ICMP response of Fragmentation Required but DF Set. So the end stations do not find the optimum frame size. If the end station sends a maximum frame size (as most would) and somewhere along the path the frame needs fragmentation, then the packet will be dropped.
Your symptoms sound like in trying to go to those sites you open the TCP connection, the first several frames are relatively small and succeed, so you see the initial message from the site, but then are sending large frames which get dropped.
One way around this is to configure ip tcp adjust-mss and set a smaller size. I have encountered symptoms like yours, have set the size to something around 1360, and had things work very well. I suggest that you give this a try and let us know if it helps.
HTH
Rick -
Apache/Jserv Config Problem with JSP
Problem: Any JSP that contains a bean reference is not being loaded correctly.
The first thing I did was to create a softlink from the ".../Apache/Apache/htdocs" directory to
the directory which contains my *.html and *.jsp files (as instructed in the httpd.conf file).
Then, I followed the instructions on page A-9 of "OracleJSP Developer's Guide and
Reference, Release 1.1.0.0.0". They instruct you to add a wrapper.classpath entry into
jserv.properties that points at your directory that contains the .class files for your bean
classes. I did this too.
I then attempted to load my JSP file from the browser URL entry line. If my JSP does not contain
a reference to a bean, then the page loads fine. If it contains a reference to a bean, then I
get the following message:
Request URI:/webdocs/vps/hellouser/hellouser.jsp
Exception:
oracle.jsp.parse.JspParseException: Line # 4, Error: Unable to find class for bean: myBean defined
by tag with class: hello.NameHandler
I cannot for the life of me get Apache to look in one directory for the .jsp file and another for
the .class file(s). Any suggestions would be greatly appreciated!
MORE BACKGROUND:
If it matters..... My first venture was servlets and I've managed to workt that just fine: I
successfully modified "jserv.conf" to add a mount point (ApJServMount) for my new servlet zone
which I have specified in "jserv.properties". I have also created an associated properties file
for my new servlet zone. I've tested this configuration and all works fine for servlets, just not
JSP.
Once again, thanks in advance for any help regarding a solution to this problem!!!
DaveProblem: Any JSP that contains a bean reference is not being loaded correctly.
The first thing I did was to create a softlink from the ".../Apache/Apache/htdocs" directory to
the directory which contains my *.html and *.jsp files (as instructed in the httpd.conf file).
Then, I followed the instructions on page A-9 of "OracleJSP Developer's Guide and
Reference, Release 1.1.0.0.0". They instruct you to add a wrapper.classpath entry into
jserv.properties that points at your directory that contains the .class files for your bean
classes. I did this too.
I then attempted to load my JSP file from the browser URL entry line. If my JSP does not contain
a reference to a bean, then the page loads fine. If it contains a reference to a bean, then I
get the following message:
Request URI:/webdocs/vps/hellouser/hellouser.jsp
Exception:
oracle.jsp.parse.JspParseException: Line # 4, Error: Unable to find class for bean: myBean defined
by tag with class: hello.NameHandler
I cannot for the life of me get Apache to look in one directory for the .jsp file and another for
the .class file(s). Any suggestions would be greatly appreciated!
MORE BACKGROUND:
If it matters..... My first venture was servlets and I've managed to workt that just fine: I
successfully modified "jserv.conf" to add a mount point (ApJServMount) for my new servlet zone
which I have specified in "jserv.properties". I have also created an associated properties file
for my new servlet zone. I've tested this configuration and all works fine for servlets, just not
JSP.
Once again, thanks in advance for any help regarding a solution to this problem!!!
Dave -
Xf86-video-ati-git: problem with git bisect
Hi,
I want to do some git bisecting. To be exact from 2-27-2009 to 17-05-2009. As far as I know old ati code won't compile against new xorg-sever so I did a downgrade to 1.6.3 but source code still won't compile.
What version of xorg-server should I install?
Currently I have
xorg-server 1.7.6
xf86driproto 2.1.0
xf86-input-evdev 2.3.2
xf86-input-keyboard 1.4.0
xf86-input-mouse 1.5.0
xf86-video-vesa 2.3.0
mesa 7.7.1
ati-dri 7.7.1
libgl 7.7.1
libdrm 2.4.19
I'm using this PKGBUILD
# Previous Contributor: vbmithr
# Contributor: Flamelab <[email protected]>
pkgname=xf86-video-ati-git
_realpkgname=xf86-video-ati
pkgver=20090217
pkgrel=1
pkgdesc="X.org ati video driver"
arch=("i686" "x86_64")
url="http://xorg.freedesktop.org/"
_latestver=6.11.99
provides=("${_realpkgname}=${_latestver}")
depends=('libdrm>=2.4.18-3' 'libpciaccess' 'ati-dri>=7.7' 'pixman>=0.16.4')
makedepends=('pkgconfig' 'xorg-server' 'fontsproto'
'glproto>=1.4.10' 'xf86driproto' 'diffutils' 'xorg-util-macros' 'xineramaproto' 'mesa>=7.7' 'git')
options=('!libtool')
license=('custom')
source=('xf86-video-ati-17-02-2009_cur_ok.tar.bz2')
_gitdir=31bd6d28dd35021e0e706d4f094989deb856c26a
build()
cd ${srcdir}/xf86-video-ati-${_gitdir}
msg "Starting configure..."
./autogen.sh --prefix=/usr --enable-dri || return 1
#./configure --prefix=/usr --enable-dri || return 1
msg "Starting make..."
make || return 1
package()
cd ${srcdir}/xf86-video-ati-${_gitdir}
make DESTDIR=${pkgdir} install || return 1
Error log (xserver 1.6.3)
http://aur.pastebin.com/zMrYj5cE
Error log (xserver 1.7.6)
http://aur.pastebin.com/2PipDjQv
Last edited by kfgz (2010-05-06 11:47:21)It's now adopted
http://aur.archlinux.org/packages.php?ID=15374 -
Transfer video to itunes problem with lion
Now I have installed OS Lion. I am trying to transfer some video from my HD to itunes so I can watch on my apple TV. Watching the AVI on my computer opens quicktime and runs perfectly. After transfering the video to itunes, and watching it in itunes the sound is all jumpy. This didnt happen before installing lion. Any ideas as currently my apple TV is now useless for my own movies.
OK just tried again
I was able to import and MP4 file by import - not by drag and drop.
Why is it my older files (regardless of the format) I could put into iTunes and then convert
Why can I not do this anymore? -
Problems with downloading videos from the internet....please help
sorry if this the wrong forum to post but I don't know where else to post my issue.
Normally when I download videos from the internet I click on "window" then "activity" then the largest file ie ? of ? (which is the MB file) and it downloads then I use isquint to put it to mp4 format. However now when I do that the file I download says that "video _ts folders can't be directly converted" and there is a button that says "Inadequacy". I can't even download videos from youtube. Any help would be great.
thank youOther than the videos on YouTube, can you post a link or URL of the videos you having problems with for us to test out for you?
I use Firefox which has quite a few video converter add ons that allows downloads of any type of video from the net. The one I use is called +Flash Video Downloader.+
"Is there anything else I need to have installed in order to be able to download videos?"
The latest versions of the following:
QuickTime
RealPlayer
Flip4Mac
VLC Media Player
Perian (AVI and FLV support)
"I also have divx and 3ivx installed"
You can get rid of those if you have any of the above installed.
" Mac OS X (10.5.2)"
Use Software Update to update your OS which is seriously out of date. The last version of Leopard I believe was either v5.6 or v5.8. Also, update all the other things listed that pertain to the OS & your model computer if applicable to your needs.
!http://i50.tinypic.com/izvwo1.gif! -
Problems with importing mp4 files into iTunes.
Hi all,
Since a few days I am the proud owner of an iPad 2. When I was looking for a solution to sync my video files (no problems with my pictures nor with my music files), I saw that I had to convert them from .avi to .mp4.
Through this community I learned that there were several free and paid options. Such as handbrake, convertavitomp4.com, etc etc
In the end I have tried around 4, but when trying to get the files into my library of iTunes it fails. In the beginning I did not receive any error message. It just did not work. I tried through CTRL-O, drag and drop. Nothing seems to be working.
Does it have something to do with the fact that I have the newest iTunes (10.5) and the latest OS for the iPad?
Does anyone have The same experience or knows a solution?
Thank you in advance,Hi Swen,
I am checking out flex player after your recommendation. However, I have since resolved my problem. I am running windows 7, 64 bit, and discovered that the problem was windows 7 security settings. All my itunes data was on a hard drive that I plugged into my new pc running windows 7. Despite allowing me to access the hard drive in the usual way, I discovered (after some help from someone more knowledgeable) that the problem was that all my itunes data was protected and I did not have "full control" rights in the security settings. Very odd, given that I have only one user account on the pc. And why it could not tell me what the problem was I don't know. But what I did was right click the drive and make sure my user account had "full control" rights and now I can drag and drop movies into itunes. This may not fix your issue but hope you resolve it soon.
Maybe you are looking for
-
Please help I really don't want the erase settings option
-
Update JQuery Version 1.4.2 to 1.11.1
Hi, We have multiple SharePoint custom solutions refering to JQuery version 1.4.2. We are planning to upgrade existing version to 1.11.1. Below are few points which we need to confirm before - Does the latest version supports IE 6, 7, or 8? What is t
-
IPhoto6, Page Setup and Preview
Trying to print from iPhoto6 and have difficulties... I believe I have the latest driver for the PSC1600 File->Page Set Up: check any Orientation File-> Print-> Print Preview: always shows the picture in landscape. What am I doing wrong here and how
-
My iPhone 4s screen is locked in portrait mode, even though the screen lock is "off". I tried to reset the phone by holding the "off" and "home" keys similtaneously, but this did not work. The screen froze after installing WhatsApp. Any suggestions?
-
BBM voice note can't save and send
Help! I updated my torch 9810 to OS 7.1.0.2263 through I don't rember the previous previous OS bundle but it was 7.1. Now, after some time when I try to send a voice note using bbm, it starts recording but fails to stop when I press the stop button u