VIDEO/LIVE TV Playback stuttery/jumpy after 20min on WMC, Win 7, Touchsmart 600-1070a

A few weeks ago the playback of either recorded or live TV on my Windows Media Centre in Windows 7 on my HP Touchsmart 600-1070a PC started becoming jumpy after about 20 or so minutes of viewing. I turn WMC off and back on, but it still lags about 20 frames behind the audio playback, which interestingly is still smooth and even. I initiated a complete system restore back to factory settings which I thought might fix the problem. Unfortunately the problem is still occuring. Just this morning though, I received a message on my desktop saying: "Display Driver Stopped Responding and Has Recovered. NVIDIA Windows Kernal Mode Driver Ver 186-60 stopped responding and has successfully recovered." Could this be the problem? I have run HP diagnostics, and there are no errors appearing, although there really should be at least some indication as to why the image begins to lag behind the audio. Also, my digital TV signal could not finish as it could not receive a channel. My digital antenna was working fine until a few weeks ago when this stuttering appeared. Interestingly, watching a movie online also gives me a jumpy, stuttery playback after about 20 minutes. Can anyone help? Many thanks, Olga

Hello Varonte
Are you running Windows 7 32bit or 64bit? Have you tried updating or downgrading your video card drivers? Based on your first post it sounds like a driver issue. Since your video card driver is reporting that it is crashing is one symptom and the delay in video and not audio also indicates it may be video driver related.
NVIDIA Unified Graphics (Windows 7 32bit)
http://goo.gl/jza34
NVIDIA Unified Graphics (Windows 7 64bit)
http://goo.gl/8FnE2
Hello raysananto
Do you have Windows 7 32bit/64bit? I would suggest updating your video card drivers as well. As I stated above the problem sounds like a driver issue.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Similar Messages

Playback control over the video live.

I can not to see playback control over the video live.
I have to image attachet that I do not can to see.
can you can help me?

There is a freeware out there http://www.download3000.com/download_5285.html

Solid State RAID or no? GTX 470, playback is jumpy still

I am currently shooting with 3 Sony HDR CX550v cameras. When trying to edit it's very jumpy, almost impossible to edit. I used to use 3 Sony HDR SR1's. Both used AVCHD codec. On CS4 I was able to edit 3 tracks and sometimes more and it would scrub decent and playback most of the time decent, it was bearable at least. Transitions would be jumpy and I would render to preview when adding any effects. I knew I probably needed to upgrade my hard drives to a RAID.
Here's my Hardware as it was:
Intel® Core™2 Quad Processor Q9650 (12M Cache, 3.00 GHz, 1333 MHz FSB)
Asus P5K3 Deluxe WiFi Intel 935 Socket 775 Motherboard
EVGA GeForce 8800 GTS Superclocked 640MB PCIe
Western Digital Raptor 150GB Serial ATA HD 10K/16MB/SATA-150
2 more 320 GB Serial ATAHard Drives slaved
OCZ 850w GameXStream Power Supply
Corsair 8 GB DDR3 1333
Before I upgraded/installed Premeire Pro CS5 I reinstalled windows 7 64 bit, nuked everything, started fresh. Then installed CS5, then updated it. After trying the hack I replaced the EVGA GeForce 8800 GTS Superclocked 640MB PCIe that I though was future proof when I bought it over a year ago, the hack didn't work on the 8800 GTS despite the fact that it has over 100 CUDA Cores. I replaced it with a PNY GTX 470 so I could use the mercury playback engine.
It seemed at first to edit better with the GTX 470 then with the 8800 GTS in that transitions played back smooth. I even changed the brightness on one of the video tracks and it played back fine without having to render. But, about half way through I started experiencing jumpy playback.
I believe I need a better hard drive configuration. According to windows my primary hard disc is 5.9 out of 10, everything else is either 6.9 or 7.3. And, with the task manager open viewing the Performance while I play the timeline the CPU and memory seem to be doing great but playback is jumpy. So, I guess I need to upgrade to a RAID.
My mother board can do a RAID 0 or 1. But, I don't know enough about RAID to do it confidently and I don't trust anyone in this small town to do it for me. So, I need to know, should I:
do a RAID using my mother board to control it? if so, RAID 0 or RAID 1 (I can occasionally back up stuff to a slaved drive, right?)
do a RAID with 2 solid state drives or 2 hard drives?
Get a solid state drive for the operating system and have a RAID separately for programs?
do an eSATA RAID?
Serial Attached Storage (SAS)
iSCSI
Networked Attached Storage (NAS)
Number 5, 6, and 7 are some options my friend told me to look into. I did a little and being getting stressed with all the options. I really don't want to understand all the options, I just want to know what will work and move on.
I found on the forums something about RAID 3 being the best but a friend that knows about this stuff didn't know why that would be better than RAID 5.
I'm so swamped with my day job, being a father, and trying to get my video business going that I don't know if my brain can handle trying to figure out much more. I got excited about Solid State and thought that would be an easy option, but the more I got to digging the more I found that it has some flaws too.
The bottom line is, I just want to edit AVCHD without having playback issues during the editing process. I've tried Neoscene by Ceneform but that turned out to be converting the files to an insanely large size. I canceled the conversion when I saw that my 4.7 gig AVCHD was growing over 30 gigs! Yikes! and it was taking forever. I would prefer to not add another step to the work flow and what not. Life is too short for all that mess. I just need to edit without playback hesitations.
I'll move the timeline indicator and there's this annoying delay, I hit the space bar and delay, I playback and it's jumpy, I try to scrub the timeline and it's not showing anything. While there are some subtle improvements with the new graphics card and MPE enabled to use it, it's otherwise all worse than before it seems. PLEASE HELP!!!!!!!!!!!!!!!!!!!!!

Ok, I should have said this.
With my current processor and good old set up I didn't have these playback issues.
Now, here's an update, this is what I shared with someone else earlier today:
I am editing multiple tracks of AVCHD video. The project at the moment is about 50 minutes long with three video tracks. The computer has a fresh, new Windows 7 Pro 64 bit install on it. Really, that's all that's on my system along with the Adobe Master Collection CS5.
Since my change from CS4 to CS5 I have not been able to edit video as well, it's really bad now. First I reinstalled windows and installed CS5 and didn't change any hardware. The performance was not good so I removed my GeForce GTS 8800 video card and purchased and installed a new GTX 470 certified adobe video card. That didn't work so I purchased 2 new hard drives to create a RAID, that didn't work either, still the same performance issues. After all of this in the last week, and now I'm wondering what do I do next? Here is my system hardware at the moment:
Intel® Core™2 Quad Processor Q9650 (12M Cache, 3.00 GHz, 1333 MHz FSB)
Asus P5K3 Deluxe WiFi Intel 935 Socket 775 Motherboard
GeForce GTX 470 "Adobe Certified Video Card"
Two Seagate Baracuda 1 Terabyte drives for a RAID 0 using the ASUS RAID controller off the board
Western Digital Raptor 150GB Serial ATA HD 10K/16MB/SATA-150
2 more 320 GB Serial ATAHard Drives
OCZ 850w GameXStream Power Supply
Corsair 8GB DDR3 1333(Twin 3X2048-1333 C9)
I have the OS and CS5 on the RAID, the project on the fast WD hard drive, the media cache and preview files on a slaved drive, I even tried moving my media files to a slaved drive. It continuously, no matter what I do, performs the same.
The permance issues are:
when I move the timeline indicator there is often a pause before it will play
when i jump around using the page up and page down keys there is often a pause
when i move tracks there is often a pause
when I hit the space bar to preview there is a pause/delay, and then it may sometimes playback fine but in certain spots the video stops and then resumes and does this often
when i scrub the timeline the preview doesn't display
I did add one effect on one track, that is brightness, but that is all.
What's weird is when I would edit AVCHD in CS4 I didn't have these problems. But, in CS5 I do notice some minor improvements, like in CS4 simple default transition would hang up for a bit, but the rest of the editing experience was easy. This is the other way around. It plays through almost all the transitions, even when the brightness effect is on one of the tracks, but everything else is horrible!
I've also been trying different settings, I've updated my video driver, RAID driver, and everything else in the device manager looks great.
I need help bad, otherwise I'm going to have to return CS5 and go with a different NLE real soon. I've wasted too much time now, please help.

Premiere CS5 - Project Monitor playback is jerky after resintall of operating system and CS5

PROBLEM: Premiere CS5 - Project Monitor playback is jerky
This had NOT been an issue prior to reinstalling the operating system and all software. I have read numerous articles on the forums and have tried everything I can find...with no results.
STEPS TAKEN TO RESOLVE THE PROBLEM:
I have scoured the articles here http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=choppy%20video&cat=support&pr oduct=premierepro and others at Cretive Cow
I have installed all updates for CS5 Master Collection, immediately following a fresh install of the operating system and SC5 Master Collection.
I have ensured that sequence settings match resolution and frame rates of footage - the problem persists.
I have tested by importing both standard def AVI files created from tape and high def SONY MP4 files - the problem persists.
I have ensured the latest Video drivers are installed (clean installation selected, so that the Windows default would be removed) - the problem persists.
I have tried the 3D settings in NVIDIA control panel | Program Settings tab... selected Adobe Premiere Pro from the drop down menu | and chaged 'Multi-display/mixed-GPU acceleration from the value of 'Multiple Display performance' to the value of 'single display performance'; although, I ran two monitors before using this latest NVIDIA video driver and I didn't experience this jerky footage issue - the problem persisted after affecting that change; so, I switched it back.
Since I have 96 GB of RAM, I don't use a pagefile. A zero MB page file is the same setting I had prior to rebuilding the C: Regardless of whether I have a pagefile or not, the problem persists.
I have tried creating a fresh user profile, where the user profile is created on the C: drive by default; and, where I left it there on C: to test for the jerky playback in a new PrPR project - the problem persists.
Regarding the C: (system drive) and why I reinstalled everything, it had become unstable and was locking up. I ran DISK ERROR CHECKING with the FIX parameter and the system was still locking up on me. Keep in mind that the System drive is a solid state drive. Anyhow, I had no choice but to dive in and reinstall everything. I wiped the system partition of the SSD using quick format and started installing the operating system. Now, I've read the CLAIM that this cuases performance issues; but, the only place I see issues is in the video monitor playback in PrPr. Everything else - Office applications...printing...browsing the Internet...works just fine, everything is responsive, whereas, I couldn't do ANYTHING with it before.
SYSTEM CONFIGURATION:
The Operating system and all software is installed on C:
All data files and most profile related folders are stored on D:
C:\ (one Intel Solid State Drive - SYSTEM DRIVE) Used Space: 57.5 GB Free Space: 388 GB
D:\ (four Western Digital 2TB drives in an on-board INTEL hardware RAID5 array & hotswapable backplane) used space: 1.28 TB Free space: 4.16TB
Adobe Premiere Pro CS5 VERSION: 5.0.3 (005 (MC: 218798))
Operating System    Microsoft Windows 7 Ultimate Version    6.1.7601 Service Pack 1 Build 7601
System Manufacturer    Intel Corporation
System Model    S5520SC
System Type    x64-based PC
Video    NVIDIA Quadro FX 4800 driver v.320.78
Display        Dell 27" LCD (DisplayPort)
Display        Dell 27" LCD (DisplayPort)
Processor    Intel(R) Xeon(R) CPU           X5680 @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
Processor    Intel(R) Xeon(R) CPU           X5680 @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
Installed Physical Memory (RAM)    96.0 GB
Page File Space    0 bytes
PREMIERE PRO CS5 SETTINGS:
Monitor PLAYBACK RESOLUTION: Full
Monitor PAUSE RESOLUTION: Full
(regardless of this setting, the problem persists)
PREFERENCES:
MEMORY:
Installed RAM: 95.9 GB
RAM reserved for other applications: 10 GB
Optimize rendering for: Performance
(Changing this setting to 'memory' does not resolve the problem)
MEDIA:
Media Cache Files
X - Save Media Cached files next to originals when possible
LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
(User Profile folders were relocated to D:\ from within the properties of each folder's 'LOCATION' tab. This is the same configureation I had prior to rebuilding the C:\drive. Testing under a new profile where it's allowed to stay on teh system drive does NOT resolve the problem.)
Media Cache Database
LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
PROJECT SETTINGS:
Scratch Disks
Path: D:\Users...\My Documents\
General
Video Rendering and Playback: Mercury Playback Engine GPU Acceleration
(Setting Viideo Rendering and Playback to 'Sofware' does not resolve the problem)
If any of y'all have any other suggestions, I'm all ears.
Thank you.

I'VE RESOLVED THE PROBLEM!
PREFACE:
OK, I am hoping that through this week-long Operating-System-and-Software-reinatalltion excerise of mine, I have revealed something that everyone -- whom have been cursing Adobe over -- can apply to their systems to resolve this jerky video problem within PremierePro CS5 (and quite possibly other versions, too).
If you've read my post above, you've seen all the steps I've taken to resolve the problem. I've read many posts, some of which have mentioned hardware upgrade / opitmization steps that one may take to enhance performance, and hopefully resolve the problem. I've read where people have taken these steps and have still experienced the problem...and then they curse Adobe. Fer-shame, fer-shame, fer-shame! (nod to Gomer Pyle).
In my case, I knew it wasn't an Adobe issue, as it had worked flawlessly before; and, it wouldn't require a hardware upgrade or reconfigureation, as my system is completely maxed out with two processors, a system drive and a hardware RAID5 array, a CUDA-suported nVIDIA 4800 FX card, and 96 GB of RAM. bla bla bla, puke...whatever. Bottom line is this:
It's not a software issue. It's not and Adobe issue; and Gawd no! It's NOT a PC vs. Mac issue! HA HA. The software had worked swimmingly well prior to the reinstallation / 'lobotomy' I perfomed on the system drive.
SOLUTION FOR ME:
Download and install the updated drivers for the motherboard. Mine is an Intel Workstation Board S5520SC. Intel has an INTEL DRIVER UPDATE UTILITY which automatically scaned my Intel system and identified drivers which needed updating. A very handy, time-saving tool!!! Here's the URL: http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
The scan revealed two Intel drivers needing an update:
Intel Chipset
Wired Networking
and one non-intel driver:
Creative Labs Sound Blaster X-fi
I downloaded and installed these three drivers, rebooted, and tested PremierePro, and was extatic to find this resolved the problem.
If you have a motherboard from another manufacturer, then you may want to navigate over to their wibsite to locate chipset and other updated drivers for your motherboard.
ROOT CAUSE:
While Microsoft Windows 7 Ultimate was able to install certain default drivers during the Operating System installation (keeping in mind that this was done on an Intel Solid State Drive that I formatted using Quick Format) these default chipset drivers apparently weren't current and were ultimately the root cuase of the jerky video playback within PremierePro CS5.
Peace

Video rendering and playback option greyed out on Premiere Pro CC 2014

I cannot even click on the Video rendering and playback drop down menu as it is greyed out.
I have a GeForce GTX 660 2GB card which should be supported as it has enough memory. I am on Windows 7.
Would really appreciate if someone has a solution how to enable Mercury Playback Engine in this situation.

Managed to fix the problem by downloading and installing the GeForce CUDA drivers as well as updating graphics card firmware.
The Mercury Playback engine enabled itself in premiere after the updates.

Streaming out video live

Is there a blackberry phone that will stream out video live to ustream like the iphone and android? I want to do this with my tour. I would love to do this. I'm debating on keeping my blackberry or getting the HTC EVO 4g
-ToNY
www.abovethefirehouse.com

Get a new phone. Blackberry, including Playbook do not support ustream. I'm on the verge on switching my phone and tablet over to apple. I tried to remain loyal but day after day....the tablet is not supported.

ITunes downloaded videos have choppy playback

I've noticed over the last few days that any music videos I've bought off the iTunes store have had terrible playback. The audio is fine, but the video lags and goes all fuzzy after about thirty seconds. The same thing happens on my Apple TV and iPad, but I've yet to check my iPhone. The lagging and distortion happens in the exact same place in the video each time I play it. Does anyone know the reason for this?

Hi, I don't know the reason why this is happening but I have the same issue with music videos. I conducted an experiment on another machine and after doing a fresh install and fresh download from the itunes store the experimental computer played the music videos without any issues so I know it is a setting on my Mac. I will let you know if I find a solution.

HT1454 why i can not get video out from my ipod touch after i did the upgrade

why i can not get video out from my ipod touch after i did the upgrade

why i can not get video out from my ipod touch after i did the upgrade

Update video in cs6 playback

I have cs6 cloud, premiere 6.03. Three cameras, video clips about 50 mins. Using CS5, muilticamera works fine in all respects. When open the project in CS6 and play it, the video often freezes, unfreezes, freezes, etc. If is very difficult to create the project originally in CS6.
I am thinking about getting a new video card (I have a GTS 650, hacked for mercury), but wonder if that is ths issue?
Would appreciate any advice, reactions, etc. Thanks.

Thanks Jim, always appreciate your quick replies.
I still need a little help.
From the linked document, it would appear that the CPU is more likely to be the problem than the video card. They speak of "video configuration." What do the mean by that?
On the other hand, the forum is full of discussion about video cards and the need for an appropriate one.
One more question. When the video freezes on playback, if I wait for a minute or so, it restarts. What is happening during this minute? (Cleaning the cache doesn't change anything).
Thanks again.

HT4623 i no longer have video capability on my ipad mini after downloading ios7. has anyone else had this problem?

i no longer have video capability on my ipad mini after downloading ios7. has anyone else had this problem?

Describe the problem. Won't show videos? Won't take videos? Or other?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
 Cheers, Tom

Need some help in saving video message from viber to my Iphone. I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery"

Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.

Probably a good question to ask Viber or look at their support site.

Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit

Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit I m Tired I m Finding & Finding Drivers
But I Wont be Able To Play Games & Other Apps Please Solve This And Give Me Link For Video Card Driver Or
Graphic Card Driver For Windows 7 32-bit (x86)
THANKS
PROFESSOR TOM........................................

Hi:
See if this W7 32 bit graphics driver works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100029-2&cc=us&dlc=en&lc=en...

Video clips won't play back after capture

I am a long-time user of Premiere Elements, currently using version 9.0. I am capturing video clips from the same videocamera that I've used in previous versions of PE. My video clips won't play back after I capture them. The clip is in my "media" area, but when I try to play it back, the audio plays but the picture remains frozen on the starting image. What is happening?

It is a Sony Handycam DCR-HC28, mini DV, using a firewire connection.
Operating System is Windows XP Pro, Service Pack 3, system specs are SATA 2 RAID 1 with dual 1 TB hard drives. 4 GB RAM. As far as how fast my processor is, I looked on my invoice and it says, "Intel Core2 processor Q6600 (2.4 Ghz, 1066 FSB) with Quad Core technology and 8 MB cache, 4 GB DDR2 SDRAM at 800 MHz.
I defragmented my hard drive before beginning and have 779 GB or 83 percent free space on hard drive.
I have not placed my video clips on the timeline yet so don't know if there is a red line on top, indicating it hasn't been rendered. I merely wanted to play back my clip to set "in" and "out" points. This has never happened before in my long history of using Premiere Elements. Would prefer not to have to go back to PE 8, as that was a disaster.

I have a problem with youtube...i can't watch some videos from youtube! They stop after few seconds of playing!! what can i do to fix it?

I have a problem with youtube...i can't watch some videos from youtube! They stop after few seconds of playing!! what can i do to fix it??

Try loading the same video in different browsers (Firefox, Chrome, Safari and Internet Explorer are your best options). If the issue is across all of them, make sure you've downloaded the latest version of Flash at http://get.adobe.com/flashplayer/
If it's still stopping after that...Do the tried and tested method for everything: reset your router.

HT2729 Is there a way to store videos into a separate album right after you shoot it on iPhone camera?

Is there a way to store videos into a separate album right after you shoot it on iPhone camera?
Finding videos in iPhone photo album requiers you to search through everything on your album. Is there a way to create separate video album or have them automatically save to a dedicated video album?
It's a pain finding videos when you use the camera so much and as it is I'm constantly organizing the photos.

Not even an app that might do this?

VIDEO/LIVE TV Playback stuttery/jumpy after 20min on WMC, Win 7, Touchsmart 600-1070a

Similar Messages

Maybe you are looking for