Video looks fine on NTSC / TV, looks bad on computer screen?
Hi, sorry for the basic question, but i seem to have forgotten the best method for converting my video to a format best suited to play on a computer screen.
I understand the difference between ntsc and computer screens, as well as why ntsc or most standard tv's play interlaced video well, but i can't seem to find a good codec for exporting (or converting) my video so that it will look sharp on a computer screen.
The project is for a school, and the primary playback for them will be 1, via a computer out to lcd projector, and 2, simply on a computer. BY the way, the school uses PC's (UGGG!).
I'm currently doing tests with quick time conversion and trying (amongst other things) Dvix, wmv, and h264.
The videos are all 720 / 480, dv/dvcpro ntsc as far as fcp sequence settings, and have all been exported via compressor > dvdsp4 as standard DVD's. All of them look great on the tv (of course) and now it's just a matter of whipping out versions that are formatted to play best on computers.
Any advice
apparently there is a de-interlace filter in FCP. i don't know much about solving your problem. it has always been a mystery to me. but found this article yesterday which could be your problem. check it out:
http://docs.info.apple.com/article.html?artnum=25318
for some reason this link is not working. google this:
"Interlacing: How to prevent jagged lines in video"
itll be the apple.com article of the same title.
Similar Messages
-
Output resolution looks pixelated, project looks fine + more Qs :)
captivate 4.0.0
hi all,
I've just downloaded the latest captivate 4 as a trial and am starting work on a new project. Sorry if these things have been asked but I looked around and couldnt find anything.
I'm setting up a project template with a few standard interlude screens between the videos, while looking at them in Captivate in Edit View they look fine, crisp text, images look fine etc...
but when I preview, and output (in high quality flash 8 min) the text looks more bold, less clear slightly pixelated and image start to appear a bit fuzzy. Is there something I'm missing? my resolution for the cap videos is set at 1010x615 and I'm viewing it on dual monitors and both are looking ugly....
any ideas?
alos another quick Q, if I create a design template and base a project off it, then update said template, will the project update with the new stuff when I re-open it?
I expect to be asking a lot more questions over the next week or so as im not up to scratch on captivate at all.....thanks!!!!!!!Hi there
Are you playing back at the same identical size as you recorded? If not, things may not look as expected. Captivate works best if you record and play back at the same resolution.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
Video looks fine in preview... goes mosaic, loses audio on DVD????
I have 3 and 1/2 hours of video edited in FCP and burned on a dual-layer DVD with iDVD. The video looked good in FCP and looked fine in preview in iDVD. The DVD burned without any pop-up warnings of problems, BUT when I put it in to check it, it goes bad about 40 minutes from the end. The picture goes mosaic (it looks like a satellite picture losing signal - sorry I don't know the exact technical term) and the audio completely disappears. On the menu page if I forward to the last chapter the counter (minutes) keeps counting away but we never leave the menu page and I can't move to other chapters.
There aren't any edits or transitions where the video goes bad. I've tried re-saving to QT and reburning with the same problem in the same place. Anybody have any ideas on what's causing this and how I resolve it?Hi
Just thinking. Can iDVD 5 handle DL-DVDs OK ?
I would.
• Use iDVD'09
• Pro-encoding Quality
• from FCP - Export out as QT.mov file, NOT Selfcontained, NO QT-conversion.
• Low free space on internal boot hard disk gives all kind of strange resulst
My mimimum 25GB for 4x3 SD video and x5 for 16x9 HD
I use
• Verbatim DVD-R
• DVD-R
• burn speed set down to x1
Yours Bengt W -
I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?
The default settings mostly likely use an audio sample rate of 32k. This doesn't work probably in FCP. You're probably better off capturing the tape in iMovie.
-
When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?
Thanks David. I had to convert the mts file to Quick Time (using AunSoft Conversion software) before I could import it into Final Cut Express. And I made sure I kept the size of movie (720 X 480 with letterbox) to compliment what I set my Panaconic AVCCAM video recorder at (720/60). Even after I fully render it, it still looks fuzzy in the Canvas window at the right that plays what I have editing down in the Timeline. A friend that edits some using Final Cut Pro helped me to narrow things down to this problem. This is also wierd. If my Viewer window at the left is set to 200% to get the person's head the same size in the Canvas window at the right we needed to put it to 400%. Does this make any sense. We think we need to control the Time line resolution somehow but cannot find any options from my manual, or the help, or in the various drop down menus. Do you have any clue? What is going on?
-
Premiere elements 13: I have created a video and it looks fine and sounds fine until I publish. the MPEG has perfect audio but no video,
anyone have publishing problems with elements 13?Premiere elements 13: I have created a video and it looks fine and sounds fine until I publish. the MPEG has perfect audio but no video,
anyone have publishing problems with elements 13? -
Using local/testing server with cs5 inserting images look fine in the split screen but do not show
Hi
If I open example: header.php and insert any photo jpeg/.html ecs i can see the images in the split screen but not in the browser if i save then refresh. I am able to make any change to the code ecs. and they are reflected just fine. I have tried this with my fireworks images .html and when that did not work i tried a strait jpeg off the desktop. This all did not work. I have deleted the local server then step by step created a new one via devnet instruction. This did not work! everything looks fine i even tried in 3 sep browsers with 0 luck....There is no remote server connected at this time because i am making a child theme for my current site. After all changes are done we will the ftp the word press files to site and change.
Ps i even started over from scratch with 0 positive affects....After a lot of pain!!!!!!! the issue is fixed lol After 3 weeks I have overlooked the obvious !!! so the simple fix was the path of the image. Yes i feel stupid 10 years in lol....
Apparently dreamweaver cs 5 will not use the full path when inserting images into the page example: If you drag the image out of your assets folder or however you do it, DW will give you a path like this <img src="images/glass.jpg" width="800" height="729"> This is not the full path and when your pist!!! you cant see things like that ;( so the image path should look like this:
<img src="wp-content/themes/adszoom/images/glass.jpg" width="800" height="729">
also in the html files example of bad then good!
<!--======================== BEGIN COPYING THE HTML HERE ==========================-->
<img name="navigation" src="navigation.gif" width="1000" height="50" border="0" usemap="#m_navigation" alt="">
<map name="m_navigation">
<area shape="poly" coords="804,7,994,7,994,47,804,47,804,7" href="http://adszoom.com/699-2/" title="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" alt="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" >
<area shape="poly" coords="602,8,792,8,792,48,602,48,602,8" href="http://adszoom.com/wp-admin/edit.php/" title="VIEW OR EDIT YOUR CLASSIFIED ADS" alt="VIEW OR EDIT YOUR CLASSIFIED ADS" >
<area shape="poly" coords="405,8,595,8,595,48,405,48,405,8" href="http://adszoom.com/post-an-ad/" title="NEW CLASSIFIED AD POST" alt="NEW CLASSIFIED AD POST" >
<area shape="poly" coords="206,8,396,8,396,48,206,48,206,8" href="http://adszoom.com/help/" title="HELP WITH YOUR CLASSIFIED ADS" alt="HELP WITH YOUR CLASSIFIED ADS" >
<area shape="poly" coords="3,9,193,9,193,49,3,49,3,9" href="http://adszoom.com/" title="HOME VIEW CLASSIFIED ADS" alt="HOME VIEW CLASSIFIED ADS" >
</map>
<!--========================= STOP COPYING THE HTML HERE =========================-->
</body>
NOW THE GOOD!
<!--======================== BEGIN COPYING THE HTML HERE ==========================-->
<img name="navigation" src="wp-content/themes/adszoom/images/navigation.gif" width="1000" height="50" border="0" usemap="#m_navigation" alt="">
<map name="m_navigation">
<area shape="poly" coords="804,7,994,7,994,47,804,47,804,7" href="http://adszoom.com/699-2/" title="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" alt="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" >
<area shape="poly" coords="602,8,792,8,792,48,602,48,602,8" href="http://adszoom.com/wp-admin/edit.php/" title="VIEW OR EDIT YOUR CLASSIFIED ADS" alt="VIEW OR EDIT YOUR CLASSIFIED ADS" >
<area shape="poly" coords="405,8,595,8,595,48,405,48,405,8" href="http://adszoom.com/post-an-ad/" title="NEW CLASSIFIED AD POST" alt="NEW CLASSIFIED AD POST" >
<area shape="poly" coords="206,8,396,8,396,48,206,48,206,8" href="http://adszoom.com/help/" title="HELP WITH YOUR CLASSIFIED ADS" alt="HELP WITH YOUR CLASSIFIED ADS" >
<area shape="poly" coords="3,9,193,9,193,49,3,49,3,9" href="http://adszoom.com/" title="HOME VIEW CLASSIFIED ADS" alt="HOME VIEW CLASSIFIED ADS" >
</map>
<!--========================= STOP COPYING THE HTML HERE =========================-->
</body>
THIS LINE IS YOUR ISSUE
<img name="navigation" src="wp-content/themes/adszoom/images/navigation.gif" width="1000" height="50" border="0" usemap="#m_navigation" alt="">
Ok thanks and if there are any issues with dw please ask: [email protected] -
I made an iMovie, 6.0.3 using music from iTunes and photos from the Internet. It looked fine on iMovie, but when I uploaded it to youtube, some of the photo near the beginning were corrupted on youtube. I tried a different photo, and the corruption took place at the same moment of the video. How do I prepare the video for export to get it ready for youtube? I wasn't sure whether to clik web or web streaming. Am I supposed to clik Quick Time after I clik Share?
I unfortunately cannot remember where I got the 'trrndlines' plugin... I assume that it must have been from CFX (as it is located under /Users/Dom/Library/iMovie/Plug-ins/cfx/XXXtrrndlines.bundle).
As for what it does, I also do not know, as I do not think I ever used it in my previous video projects.
At this stage, I think I just need to uninstall it so that iMovie doesnt try to use it.
Do you know how to uninstall a CFX plugin in iMovie?
NOTE: I have re-installed iMovie 6.0.4 (instead of iMovie 6.0.3), but still encounter the same issue. -
Static image looks fine in media pane but renders with problems
I have a project in which I am placing a few static JPGs over the video portion for a few seconds at a time here and there to illustrate certain things a speaker is touching on. The JPGs are usually not quite big enough to cover the entire frame of the media pane, so I end up having to resize them and make them bigger to either cover the rest of the video that’s still showing, or to effectively ‘crop out’ a portion of the JPG that I don’t want to see in the final output.
Everything looks fine in the media pane. The problem arises when I output the final video to FLV. Some of the JPGs look fine – just as they did in the media pane preview. But a lot of them end up showing portions that I had cropped out, or even portions of the video that I know were covered up. It appears completely random. And when I re-export and try again, sometimes the problem disappears.
Windows XP SP3
Adobe Premiere Elements 9.0
Export format: FLVOne JPG sample is 960x720 pixels.
The Project Preset Frame Size is 1280x720 pixels.
For this particular sample, I stretch the JPG so that the text at the bottom of it falls below the media pane (since both the JPG and the project have the same pixel height). It becomes a little more pixelated, but that's fine. Sometimes it does get cropped out of the final FLV, sometimes it doesn't... -
Monitor has weird, pixelated colors, but external monitor looks fine
I have a MacBook Pro. It is a couple of years old. Recently the monitor started fritzing out. At first it would happen only happen when I ran windows through boot camp. A couple of days later, it began happening in os x too.The screen seems to be operating on a reduced amount of colors, a preponderance of green and everything is pixelated. There are blobby shaped circles of rainbow all over the desktop. Windows on top of the desktop look better, but still way too green and pixelated. All parts of the screen are equally bad. I tried changing all the settings in display. Also ran disc utility. The display on the external monitor looks fine. Any ideas on how I can fix this?
Some MBP have bad nVidea graphics chips that can do wheat you describe, except it usually affects an external monitor as well. It's covered by a warranty extension program here:
http://support.apple.com/kb/TS2377 -
i need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.
ASk in the DW firum and be much more specific. Web page rendering issues are specific to specific versions of browsers and you may simply be using some bad code that messes up your page.
Mylenium -
I just restored my ipod to its factory settings, hoping it would start working again. Yet when it finally turns on I find that i can't unlock it. The display looks fine, as everything still moves and the languages still change. Is there any way for me to restore the touch screen?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Likey a bad digitizer
Apple Retail Store - Genius Bar -
Compressing Video for DVD Burn Makes Text Look jagged
Hello,
I'm currently at the final steps of a lengthy video production project and am struggling to make the text elements of my finished video display correctly after compression prior to burning it to DVD.
I create and produce music for a living and don't have nearly as much experience with video editing. I'm a bit new to all of this and am using FCE 4.0.1 to create my video & Compressor and DVD Studio Pro 2 to compress and author video for DVD.
*My main issue is this:*
I'm using an imported still image as the title card for my film. It's a mixture of large plain Helvetica Neu font text with some additional stylized lettering created in Photoshop (which is why I'm not using FCE's built-in text generators for the title card). The typography isn't very wild and crazy, it's basically big bold letters and a few gentle curves. I exported the image (1200x600) from Photoshop as a .png and imported it into FCE.
When I export my finished video file (.png title card and all) out of FCE, I export it as a raw uncompressed Quicktime file:
Apple Intermediate Codec 1440x1080i
29.97 fps
Pixel Aspect Ratio: HD (1440x1080) (Anamorphic not checked).
Field Dominance: Upper (Odd).
(It displays in quicktime at 1920x1080 though.)
After initially exporting from FCE, the title card image and all the other text in my movie created from FCE's built-in text generators look fine. It's only after I compress the finished movie in DVD Studio Pro or Compressor that I get jagged looking edges on the curves of my letters, primarily the title card image (the text generated by FCE's generators holds up okay).
In compressor I'm using the "MPEG-2 6.2 Mbps 2-pass settings for DVD" preset and in DVD Studio Pro. Using '2 pass VBR', 'Best' motion tracking, 'best' and 'highest quality' on all the compression settings I can find. I'm encoding at a total rate of 6.5Mb/sec max and 6Mb/sec average. These are standards for compressing to DVD and since I'm preparing a master for reproduction, I've been told I shouldn't increase the data rate over this or I'll run into player compatibility issues down the line.
Any ideas on how I can make this text image last through the compression process and still look clean and crisp without having to increase the data rate of compression? I'm going to play with different file formats for now, but it that doesn't work I don't know where to go from there.
Thank you for any help insights you can provide.I started with a variety of HD raw footage (most of it gathered on Canon 5D Mkii SLR Digital camera in the form of: H.624 1920x1080) but converted all my raw footage prior to editing into:
Apple Intermediate Codec 1440x1080i
29.97 fps
Pixel Aspect Ratio: HD (1440x1080) (Anamorphic not checked).
Field Dominance: Upper (Odd).
I edited everything in Final Cut Express 4.0.1 using the AVCHD Apple Intermediate Codec 1440x1080i60 at 29.97 fps sequence preset.
When I finished editing all my video I exported it as a raw uncompressed quicktime file which is also:
Apple Intermediate Codec 1440x1080i
29.97 fps
Pixel Aspect Ratio: HD (1440x1080) (Anamorphic not checked).
Field Dominance: Upper (Odd).
But when played in quicktime this finished video displays at 1920x1080, which I'm happy with. (I'm assuming this is the proper behavior of Apple Intermediate Codec? It seemed to take 1920x1080 footage, converted it to 1440x1080, and then spit it back out as 1920x1080 after the whole editing process.)
But seeing as how my issue is with an image file I'm creating in Photoshop and importing into my video sequence, I don't quite understand how the rest of my footage would really effect it. I've made sure to create the image using the same dimensions and pixel aspect ratio as my sequence frames by using one of the standard Photoshop screen templates (HD widescreen 1440x1080). I save my title card image as a non-interlaced .png file and import it into FCE.
When I place the imported image on the timeline, FCE doesn't resize it because it matches the frame dimensions of the sequence. When I view the image at 100% in FCE's viewer all of the image's lines, curves, and shapes display properly as they appear in my original photoshop file.
But for some reason FCE treats this imported .png image file as a 'rendered proxy.' So while it looks fine in FCE prior to rendering and exporting, when I export the video sequence containing this newly imported title card image, the resulting uncompressed quicktime file contains jagged horizontal lines across some of the characters in the title card image. It almost looks as if there's some interlacing issue going on.
However after much experimentation and trial and error I landed on a custom compression setting in Compressor that seemed to take care of this issue. I did as you recommended and selected a high quality 7.5 Mbps encoding preset (7.5 Mbps max/6.4 Mbps average), but noticed a 2 pass VBR rendered better results. What really seemed to do the trick was adding a deinterlace filter to the compression preset, and that miraculously seemed to eliminate the jagged lines in my title card image, restoring it to its original appearance (at least during my initial inspection in Compressor's preview mode).
After letting Compressor crank away, I looked at the finished compressed video in quicktime and the jagged interlaced-looking lines in my title card image have returned. Compressor's preview was somehow misguided.
Now my plan is to burn this compressed video to a DVD and view it on a TV to see if maybe these jagged lines in the final compressed version are only being caused by viewing on my computer's monitor. I'm hoping this is the case, otherwise I'm at a loss of what to do next.
If you need any more details please let me know. Otherwise I hope this is enough to give you a better idea of what issues I'm dealing with.
Thanks again for your insights. -
First ipod,used 5th gen 30gb, restored, synced, everything looks fine except no sound!
Used 5th gen ipod 30gb classic. Restored, synced and everything looks fine....except there is no sound! Is it damaged or is there something I can do? I am just learning...can anyone help me? Thanks
Does Kenwood say it will work with a 5G iPod (or iiPhone 5)?
Did the iPhones have iOS 7? Sometimes an iOS update breaks compatibility
Sometimes this works
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
I 've had the newest iPad for about one week. Just started using face time..why does face time camera take pixelated pictures? The iSight camera pictures look fine.
Kathleenfromks wrote: ...why does face time camera take pixelated pictures? ...
Because something is wrong.
You will need to troubleshoot to find out what needs to be fixed.
One of these suggestions may resolve your trouble.
FaceTime (and other video) quality problems can be caused by problems at either end of the connection. Unless your video callers' FaceTime connections work properly with everyone else but you, both parities to the video call should consider these possibilities.
(1) Restart your iPad and test again. Sometimes a simple restart fixes things.
(2) Use a fast broadband internet connection for best possible FaceTime video.
Broadband speed matters at BOTH ends, so you use something like http://speedtest.net/ to test both ends of your video connections.
Speeds less than 300 Kbps (up and down) at both ends are unlikely to give best results.
(3) Try from a different wi-fi connection.
If the problem is ONLY at your current location, restarting your internet connection may help. Shut down your iPad or turn Airplane Mode "on". Then check your cable connections, restart your modem and wireless access point, reconnect iPad to the wi-fi, and test again.
If the problem remains but ONLY at your current location, there may be a problem with your internet service. Contact your ISP for help.
(4) Always use as much light as possible for best images (including video) from your iPad.
Message was edited by: EZ Jim
iPad2 iOS 5.1
Maybe you are looking for
-
HP LaserJet Pro 100 color MFP M175nw does not connect to wireless network
I recently upgraded my wireless network router. I had my HP LaserJet Pro 100 color MFP M175nw connected to the old wireless network router. The SSID is password protected (WPA2) I need to connect the printer to the new wireless network router. Howeve
-
How do I re-install Acrobat XI Standard?
How do I re-install Acrobat XI Standard?
-
Some thoughts on trade-offs between usability and user-friendliness
I use Awesome as a window manager over LXDE. Recently, a friend of mine tried to use my laptop. The experience frustrated him somewhat--he managed to start the browser through the menu shortcut, but it opened out of sight under the "web" tag. Once he
-
Phase displays? Compared to what ref?
I am using Labview 7 and I have a question about some of the new features. I am trying to input 2 channels and graph the output amplitude and phase difference. I have tried using the "new" interfaces for "spectral" and "tone" measurements but I am un
-
Nokia 808 PureView, is it still being made and are...
Nokia 808 PureView, is it still being made and are there any official stores selling this phone in Hyderabad, India???