Video looks horrible

Ok, Thi is my 1st time using FC: Express and had a question. I would like to know how I can keep the original quality video I am done editing it in FC. Ususally when I am done and export it, the quality looks horrible.
The original file I had was an RAW version from a FRAPs I did, about 20gigs. From there I encoded the video with divx from vdubb and shrank it to about 375mbs The quality is still crystal clear at this point at 1576x986 resolution.
I create opening and cloasing credits from Live Type and input everything into FC, add music and then create my file. however like I said when the file is create it looks like crap.
Any help would be great

Hi(Bonjour)
Final Cut Express HD support 3 kinds od material:
+Plug-and-play support for most DV25-format camcorders and decks: MiniDV and DVCAM (NTSC or PAL)+
+Plug-and-play support for most HDV-format camcorders and decks: 720p, 1080i+
+Plug-and-play support for most AVCHD-format camcorders and decks: 720p, 1080i*+
Final Cut Pro supports many formats in both Standard Definition and High Definition:
+DV, DVCPRO, DVCAM HDV+
+DVCPRO 50, IMX DVCPRO HD, XDCAM HD, and XDCAM EX+
+Uncompressed 8- and 10-bit SD Uncompressed 8- and 10-bit HD+
Compressor (included with FCS 2) can convert to a multitude of formats.
Your workflow is not a standard one, so you have to use workaround to get your media in FCE HD.
Michel Boissonneault
Message was edited by: Michel Boissonneault

Similar Messages

Help with exporting. Video looks horrible after export, but great when in premiere pro

Hey guys, looking for some advice on exporting.
When I finish a video, the color and everything looks great while in premiere pro, but after exporting it, the color ends up looking dull and the whole video looks blurry. I'm filming with a canon vixia hf200 at 60i. It imports as a AVCHD file, I deinterlace it, and then export at the Vimeo HD settings. What can be causing the video to look horrible after exporting? What settings should I be exporting under? Any help would be appreciated!

It looks like you're coming up against some of the colorspace handling issues that the Premiere pipeline has.
Since your source is 60i AVCHD it's HD and thus rec709 colorspace. If it gets encoded with the standard rec601 colorspace (SD sizes are this) then all the colors get crushed. Look for a "709" and "601" radio button in your export settings. If it's not there you're out of luck.
The "blurry" is probably a poor quality de-interlacer. If Vimeo permits interlaced vs progressive do that instead. it's always cleaner to stay in the same video format all the way through.
TECHNICAL ASIDE:
rec709 is a triangle of possible colors that can be expressed by mixing of ratios of 3 emitters (the R G B corners of the triangle). (they are the RGB phosphors of a CRT and now LCD pixel elements)
rec709 is a bigger triangle than rec601 so it's capable of more colors. but if you accidently map that triangle's corners to the coordinates of rec601 it gets crushed.
In photography the "sRGB" uses the rec709 triangle. A bigger triangle that that is "Adobe RGB". So if you work in Adobe RGB and export to sRGB without conversion the colors get crushed because sRGB in inside the triangle of "Adobe RGB".
http://en.wikipedia.org/wiki/Srgb
http://en.wikipedia.org/wiki/Rec._709
http://upload.wikimedia.org/wikipedia/commons/8/8f/CIExy1931_sRGB.svg

Video Looks Horrible after Render?

I am working in a HDV 60i timeline with a mix of 60i and 30f codecs. The video looks great until I render. Once the video is rendered it gets really pixelated and ugly. I usually just export without rendering but when I tried it with this video it took about 15 hours and the final result looked exactly like it does after I render. I checked the render settings and they all looked they they are set to the highest quality. When I dump my render files in the timeline the video goes back to looking good? What the heck?!! Please help!!!! I am using FCP 6.06 Thanks.
Jeremy

So that is what is weird. The long export looks great now, (after exporting the smaller pieces, and then bringing the smaller pieces back and exporting the long one) The video looks great, plays great in both quicktime and final cut pro. The file doesn't appear to be corrupted...But after 4 different attempts at compressing to Mpeg2,(on different computers) the video crashes while in compressor. This is the error I am getting. 3x Crash Down. Sorry I kind of combined by two problems, but the problems were essentially the same. Here is a link to my other post. http://discussions.apple.com/thread.jspa?threadID=2363793&tstart=0
This is my normal workflow I use all the time. I have heard your not supposed to use HDV and change to Apple Pro Res, but the HDV workflow works 98% of the time. I tried a couple different settings with the Apple Pro Res, but it seems degrade the image quality quite a bit. I am about to try the Adobe Media Encoder.
Thanks again for your time. Jeremy.

Just bought the best mac mini, but Netflix looks horrible.. Why?

I bought a mac mini 2.6 ghz, late 2012. I'm using it on a Samsung 40 in smart tv with an HDMI cable. When I get on netflix the videos look horrible, and I'm wondering if there's something I can do to fix the quality of video (other than downloading sliverlight and placing the quality to high on netflix). Thanks for the help

Sorry for the confusion, I meant that I had already done those things and am wondering if there's anything else I can do. I think I solved the problem, though. The quality is just taking a little longer than my last mac to buffer into HD video.
I'm also wondering if I should just use the HDMI adapter that came with the mac mini, things like brightness control and volume control can no longer be controled straight from the keyboard because it assumes I'm not lazy and will grab the controller! Also, web pages and just the overall all look is a bit distoreted because it's trying to push it to 40in..I guess.
Thanks for the comment!

Video looks good, text does not

My video looks good, but the titles, Ariel bold - 78 pt bold and 68 pt regular, white text on top of black bar set at 50% opacity look lousy. The text is not crisp and angular as it should be. It looks great on my monitor and when rendered to flv, but when rendered mpeg-2 to dvd with the highest specs as instructed, it looks lousy. In fact, it looks the same as when I rendered it with the default settings to dvd. Any suggestions?
I just found this on the web, is this the best solution?
"Never use premiere for effects, titles, ect. Use After Effects then render it to a uncompressed animation clip - alpha settings selected. reimport to premier lay it down and gaze at beauty. Compression is bad, premier compresses everything it renders, the more you compress-layers, the more degredation and pixelation"
I posted the Creative Cow message on the After Effects forum and was told to ignore it. I have rendered in so many different ways and configurations to mpeg-2 and my titles that are 68 px and 78 px still look almost rounded instead of angular and crisp. Help....
Thanks so much,
Lisa

Well first off i will start with mpeg2 dvd is ancient and horrible technology and always looks bad to me... that being said what are your specific specs. If you have an hour or video or less then you should be encoding as 9mbit CBR and that is as good as your going to get.
for all we know you could be trying to put 3 hours of video on a single layer dvd and using 3mbit data rate which will look very bad.
there could be several issues, are your fields correct? reversed fields can make graphics look pixelated. what are you viewing your dvd on that makes it look so bad? i have noticed many hdtv lcd flat panels when given a SD DVD video look horrible.
export a single still image of your text and view it in photoshop, then render out a mpeg2 version of your video and import it back into premiere and export a single frame of it also. then load them into photoshop and compare, you can composite them side by side and post a pic for us to see what you are describing and try to troubleshoot it for you.

Video looks great on MBP, horrible when projected....

I am projecting a video that I created in FinalCut on the MBP onto a screen using a Dell 1610X projector Check it out at http://accessories.us.dell.com/sna/products/HomeTheaterProjectors/productdetail.aspx?c=us&l=en&s=bsd&cs=04&sku=224-7541
During my tests, I noticed that the video looks great on the MBP but really dark when projected.
I don't want to re-color the video to make it work on the projector... any thoughts, hints, insight you can provide?
Thanks in advance.

You are comparing two different things and expecting them to be equal. That won't work.
The computer monitor emits light, the projection screen reflects light.
The reflectivity of the projection screen plays an important role. A white painted wall will not look the same as a proper screen with a silver or glass bead coating such as those used in movie theaters.
Ambient light from the auditorium or leaking through the drapes will dilute the contrast on the screen.
How are you connecting to the projector? The model you linked has VGA and HDMI inputs. VGA does not have the ability to display the range of color and contrast that your computer does. HDMI might improve things somewhat.
I don't want to re-color the video to make it work on the projector...
Then you have to block as much of the ambient light sources as possible and get a decent screen.

Imovie project when burned thru idvd looks horrible

I have worked for several months on making my first Imovie. It is about 1hr in length. It combines both narration, video, soundtrack and still images. When I previewed the project on imovie looked great. I can also export thru quicktime and it looks good, but not as good as it does in imovie. When I followed the directions on how to export to Idvd, I was unaware of how poorly the finished project looked in Idvd. I burned it and was let down as all my titles where pixelated and the still images are combing real bad. Also some of the images are jerky in the ken burns effect. I find this frustrating as I can save it as a quicktime file and it looks pretty good (but not as good as in imovie). It appears to me that everything I have tried as far as importing to idvd looks horrible when Idvd gets done with it. In fact even the Idvd menu I made looks pixelated and horrible. I am making this dvd to sell to others and to present at talks I am giving. The quality is so poor I am thinking about bagging the whole project. I noticed on the forums regarding both idvd and imovie many of the questions about the quality degredation in idvd dont get answered. Or when they do get answered, the answer is to purchase final cut or more software in general. What I want to know is can I make my excellent looking imovie look acceptable in idvd? If not, why? Why would mac make a option to make a movie project look good in imovie, but the only way to export it is to make it look horrible? Also, is there a way to make a dvd in idvd that looks as good as my Imovie project (without dropping 1,000$ for more software which I am not going to do as now I don't trust it until I see it first)? What am I missing here?

Hi Adam,
Just some general comments about exporting from iMovie '09. From posts on the forum, and from my own experience, it's best not to use Apple's preset export option "Share to iDVD". You may not have used this, but it produces an AIC (Apple Intermediate Codec) movie that doesn't look good when burned through iDVD, for some reason. Odd, considering that iMovie edits in this format. _The option "Share to Media Browser" gives much better results._
You don't mention what format your source footage is (to the best of my recollection). This may have a bearing on the final result (burned DVD). Is it DV or AVCHD or some other format? iMovie '09 has a reputation for producing less than stellar results with DV footage, due to the way it handles interlaced material. AVCHD footage turns out quite well on DVD after editing in iMovie.
If you have not already tried this, export using "Share to Media Browser". In iDVD, from the Media tab, drag your movie into the background area of the iDVD theme, then proceed to set up the DVD as usual. When sharing to the Media Browser, you have a range of sizes to select from. Try Large (960x540) and also HD (1280x720). I've used both but see little difference, if any, in the final DVD. But I do get quite good results with both. The picture is softer and less saturated when compared with the original AVCHD footage viewed via the camcorder on an HD TV. This is to be expected, given one is HD and the other SD, of course. But it shouldn't be as bad as you are describing.
There are many posts about DVD quality on the forum. As you would be aware, some offer very good advice. Try different methods using a short test project to see what gives the best results for you. Look out for an e-book by Steve Mullen - not free, but some good tips there.
Hope this helps in some way. Quality issues can be frustrating!
John
Message was edited by: John Cogdell

DVDs look horrible on Apple Cinema Displays

I compress my HD video using Compressor or Adobe Media Encoder, using Compressor's 'Best Quality 90 min' settings. Then burn to a single layer disc through DVD SP. It looks fine on an SD CRT monitor, but when playing back on an Apple 23" Cinema Display, it looks like it's been digitally uprezzed - basically it looks horrible.
However, when purchasing an SD DVD from the store, it plays back beautifully on the Apple displays.
I don't think it's the compression settings. Could it be that I'm burning & duplicatin instead of stamping & replicating? I'm getting lost with this.
Any thoughts?
Thanks!
Kenny Miracle
Mac Pro 8-Core, 12 GB Ram, ATI Radeon HD 4870
Final Cut Studio 3

I find the best way is to export as a self-contained movie to a codec such as ProRes (do not use things like HDV) then bring that into Compressor. In Compressor make it a SD m2v as suggested. Though frame controls add time, it is not too painful when using Better (not Best) settings, especially for resizing. The difference between Better and Best is not worth the trade off most of the time in terms of the length of time needed to encode.
Set up virtual clusters to help with time to encode. Also make your own preset and/or make sure to tweak the Apple presets. If using the 90 Minute preset, for example, it is two pass @ 6.2. If you have an hour worth of material, for example, you can go higher. Sometimes the incremental difference may not be seen, but for an hour you can go up more to where it is noticable. YOu could even try a high CBR rate. Take a look at the links below.
http://dvdstepbystep.com/faqs_7.php
http://dvdstepbystep.com/faqs_3.php

DVD looks horrible on LED flatscreen

Thanks for any help on this. Have been making DVD's w/ DVDSP for years... always looking great on computer and various players. Just tested on a Samsung LED 40" and it looks horrible, unwatchable, pixelated, blurry. Unfortunately, this is where the DVD will be screened. Have tried various TV settings and can't figure out the problem. Have a deadline for viewing and I'm in a bit of a panic...any advice appreciated. Thank you!

Hi Russ.
Thanks so much for your response. I'm shooting 1920x1080 30p on a Canon DSLR. I've been shooting this format and encoding the same way for a long time. This particular project is fairly basic. It's a three camera workout DVD, with outdoor natural light plus HMI and very smooth jib moves.
This is just the first time I've looked at the DVD on this new flatscreen. Previously I had only seen it on my computer, a stand-alone, portable DVD player, or an older television connected to a DVD player. Obviously, the quality was never amazing, as it was downsized to SD, but there was no pixelation or stair-stepping.
So I'm shocked to see how this looks on this TV. I've gone through all the TV settings to see if it's something I can adjust on that end. The DVD player that's connected to it is older, so I thought I could maybe adjust some settings there, but haven't figured it out. When I play commercially made DVD's they look fine, so I figured the devices can't be the problem.
Here's the recipe I've been using, that's worked for me. But maybe it needs some tweaking. I am so appreciative of your help and would welcome any advice.
Thanks again.
Description: Fits up to 90 minutes of video with Dolby Digital audio at 192 Kbps or 60 minutes with AIFF audio on a DVD-5
File Extension: m2v
Estimated size: 1.23 GB
Type: MPEG-2 video elementary stream
          Usage:SD DVD
Video Encoder
          Format: M2V
          Width and Height: Automatic
                    Selected: 720 x 480
          Pixel aspect ratio: NTSC CCIR 601/DV (16:9)
          Crop: None
          Padding: None
          Frame rate: (100% of source)
                    Selected: 29.97
          Frame Controls Automatically selected:
                    Retiming: (Fast) Nearest Frame
                    Resize Filter: Linear Filter
                    Deinterlace Filter: Fast (Line Averaging)
                    Adaptive Details: On
                    Antialias: 0
                    Detail Level: 0
                    Field Output: Same as Source
          Start timecode from source
          Aspect ratio: Automatic
                    Selected 16:9
          Field dominance: Automatic:
                     Selected Top first
          Average bit rate: 5.5 (Mbps)
          2 Pass VBR enabled
                    Maximum bit rate: 7.2 (Mbps)
          High quality
          Better motion estimation
          Closed GOP Size: 12, Structure: IBBP
          DVD Studio Pro meta-data enabled

Premiere Elements 8 video looks bad when editing

Hi -
I'm brand new to Premiere Elements 8 - in fact just installed it on an HP/Compaq 6530b laptop running Windows Vista (32 bit). Initially, I tried to edit a Flip video (MPG4) and also a Flip video that I converted to AVI. I also have a new Canon Vixia HF M31; regardless of what video I use, the video editing window looks horrible. There's a "double image" - the one on top is heavy green and there's another "double image" of the video below it that looks better but is below the green-shaded video (see inserted image below). I'm wondering if it's an issue with the laptop, especially since multiple video formats have the same problem. Where do I begin to resolve this?
NOTE: I've taken this same video and it looks fine with Windows Movie Maker (at least the MPG4 - haven't tried the Vixia .MTS video yet as I'm guessing it won't work with Movie Maker).
Thanks,
Calvin

Thanks Bill and everyone else. I appreciate all of your thoughtful responses.
I've tried PE8 on my personal desktop PC (though its only a trial b/c my corporation has a license for PE8 but only for PC managed on our network) and things look much better, other than that annoying "Trial version" banner inserted on my videos.
I've render some video of my daughter playing volleyball as a PC-based media file and I'm pretty surprised at all the presets available and how using one of the various MPEG2 or NTCS presets makes a huge difference in the quality of the video. Where can I read more about this? What I do notice is the MPEG2 video looks very clear but is choppy when the camera is moving while the NTSC that I used is a bit pixilated but the video is not choppy when the camera is moving.
In the end, I'm trying to decide if PE8 is for me - this is my first HD camcorder and in the past I was happy with Pinnacle (way back on Version 10); I've heard that really it's down to PE8 or Sony Vegas. I'll keep doing research and I think there's a trial download of Vegas but I always appreciate the advice of experts.
Thanks again!

Video looks Blocky, Blurry, Fuzzy in AE (1280X720 29.97fps)

Im trying to make a montage of gameplay I have recorded of myself playing PS3 the files are .m2ts, so im using Adobe Premiere Pro CS5.5 to cut the video into clips so I could then export them into AE (After Effects).
So it can make it esier to work with other than cuting the video in After Effects this way I have all my clips organized the way I want.
The way im doing that is by going over to Export --> Media --> with these settings Format: QuickTime Video Codec: Photo - JPEG Quality: 100
Now I open the rendered .MOV file using Windows Media Player and everything looks flawless nice video quality is not gone.
So then comes the AE part now my clips are ready to be mastered and added effects to so I go into Import --> File --> and choose my .MOV file which I have exported from Premiere Pro
But for some reason my video looks Blocky, Blurry, Fuzzy real low quality which is not what I want I have it set on Full and yet it looks horrible.
It looks like AE is having trouble opening the video properly or something in the settings is wrong but from my point of view the composition matches everything from the clips: 1280X720 29.97fps
Here is the picture of how my video looks on After Effects as you can see the text is wierd looking and in the settings you can see I have it on 100% and Full
This next picture below is how it looks on my Windows Media Player as you can see everything looks way nicer
Now this last image is the settings that come up on AE so that you can see my video has the right settings
If anyone can help me out with this I would really appreciate it I know there has to be a solution out there!
Thanks in advance

I recommend you read this for starters and then work your way through thze AE help, including the topic relevant here.
Mylenium

Digibeta output looks horrible

I edited together three episodes of a series. The video was imported from Digibeta NTSC via SDI though a Kona3 card Uncompressed 8 bit. I created the sequence and then output the final sequence back to Digibeta using edit-to-tape through the Kona3 via SDI again.
The final master looked horrible with interpolation and aliasing all over the place.
I am not sure what the problem is. Should I have captured 10 bit, is there certain settings I should be using to output the final sequence. Any help would be appreciated. If you need more info let me know.
Thanks!

I had the wrong input chosen on the deck... I was recording composite instead of serial component - no wonder it looked horrible!!!!!

How can I get audio to play from my TV when using hdmi cable? Video looks great, just no sound.

How can I get audio to play from my TV when using hdmi cable? Video looks great, just no sound.
I've tried plugging the hdmi into the TV directly and the receiver.
I get video every time. HBO to Go , Xfinity, ABC, Youtube, etc...
just no audio. Any suggestions?
I've tried starting the apps then plugging in the hdmi cable.
I never tried this before I upgraded to IOS 5.

Claudiamil-
I had not tried it with mine since upgrading to iOS 5, so I just did. I'm using a small Vizio HDTV. I did not try YouTube, but did try several videos and musical numbers. In all cases there was sound, including stereo when the source had it.
I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down. Dah*veed's suggestion to reset may be what you need.
Fred

I have a Black i-phone 5, iOS 7 on a black phone is horrible, there should be a darker setting for black phones... it look horrible on a black phone because it does not match... its too bright... I think there should be a darker option!!

I have a Black i-phone 5, iOS 7 on a black phone is horrible, there should be a darker setting for black phones... it look horrible on a black phone because it does not match... its too bright... I think there should be a darker option!! Is there going to be a darker option of the software???

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Adobe Bridge full screen previews look horrible??? Any ideas???

OSX finder previews and ViewNX look tac sharp????? I have scoured through other forums and have found this is a known issue but none of the tips are working. Full screen previews still look horrible!!!

Have already played with all the Preference settings as recomended by other forums with the same issue.....

Video looks horrible

Similar Messages

Maybe you are looking for