Video looks ok in source window but distorted in Program window.
I am trying to work with video clips shot using a Canon XF 305 at 1280 X 720 at 60P FPS. Using the Canon XF utility, I have injested the clips from the card to my hard drive where they are stored as MXF files. Using Premiere’s media browser, I imported them into bins from my hard drive. I set up the sequence to match the clips settings . The video looks fine in the Source window but when I bring over onto the timeline- the same clip looks distorted with artifacts in the program window. I then used Adobe Prelude to convert the MXF files into ProRes 422 LT files with same resolution of 1280 X 720 at 59.94 frames FPS. I used the media browser to bring those pro-res clips into Premier and set up another new sequence to match the clips setting. I get the same problem- the video looks good in the source window but terrible in the program window when I bring them into the timeline. They are completely distorted with artifacts. This is the first time I have tried working with 1280 x 720 60p fps clips. I have successfully worked with 1920 X1080P 30P clips from the same camera with no issues. Any ideas on what I am doing wrong and how to correct my workflow will be appreciated.
I am using a 2009 Intel Mac Pro with Snow leopard 10.6.8
Is your 'Playback and Pause' resolution set to 'Full' for your program monitor?
Also, why not just drag one of the clips to the 'New Item' button at the bottom of the project window to make a sequence with the settings of your clip?
Similar Messages
-
Videos will not work in Firefox but work fine in windows explorer. why?
I tried to verify my plug-in's and all are enabled. I found where was suggested to remove and reinstall Firefox but that did not fix problem either. I tried to change viewer for videos but still no luck. Not certain why Quicktime doesn't work. Note, videos when browsing will not open but everything else works fine. Videos work fine with windows Explorer, but not Firefox.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Premiere Pro CS4 Sequence Error? (Timeline Window says No sequence, Program Window says no sequence)
Hey, I was trying to edit a bunch of .mpg files together, in a new project file, in a sequence 01, and all the primary editing windows came up, and while I can easily get the source window to recognize sequence 01, both the timeline and the program window say no sequence and dragging sequence 01 or any of the .mpg videos does nothing.
Since I can't even see the timeline of this I can't edit, so if someone could help me as soon as possible that would be greatDouble click any sequence in the bin to open it.
This kind of basic functionality is pretty well covered in the Help file. I recommend reading it all the way through before you use Premiere. -
Videos look dark displayed using projector, but OK in my laptop?
this one seems to be a common problem. I have been lecturing in several medical meetings and when colleagues show embedded videos in their presentations, they look very dark. Sometimes they are so dark that miss completely the point. I have had the same problem, to the point where I have had to skip a slide with video because it is so dark that it cannot be seen on the main projector screen. The curious thing is that in my laptop screen they look fine when I am presenting... but very dark when they are projected. Any ideas to solve this problem? Thanks in advance!
I don't have the same problem (i.e. videos too dark) but I'll bet it's the same solution. My problem was that the Keynote presentation on the LCD were way too dark. Funny thing was that if I opened up the systems preferences dialog box, they looked fine. Hummm.
Turns out that it was an issue with a change in the latest OS and how apple now handles the gamma setting in external displays. I don't recall all the details but Snow Leopard seems to use the new standard gamma of 2.2, making output too dark. The output gamma should be closer to 1.8.
To fix this, you need to adjust the color profile for the LCD projector that you are using.
To fix a projector, the projector must be plugged in and turned on to do this.
If you go to System Preferences, Displays and the Color option. You'll see a list of Display Profiles. There will be a dialog box on both the computer screen and the projector screen. To get them both on the computer screen to make editing a little easier you can click Gather Windows at the bottom of the dialog box on the computer.
I found it easier to just Calibrate the monitor and same a new profile - you can also uncheck the Show profiles for this display only and pick another profile like one of the sRGB profiles. To calibrate, click the Calibrate button (be sure you do it on the dialog for the LCD projector) I'd click Expert Mode - this will give you more options when adjusting the Gamma. Run through the Calibration routine making sure that you select a Gamma that is closer to 1.8 instead of the 2.2.
At the end, same the profile and then everything on the external display should look much better.
When researching my issue, there seemed to be consensus that using a digital interface the projector was better than the normal VGA cable. Didn't have a cable to try that.
Once you do this, the machine should always recognize the projector and behave properly. Seems a pain to have to do this but I didn't find any other alternative. The good thing is that I have not had to do this on every projector that I use. I have my own projector that has always worked properly.
I teach at a university where the rooms have mounted projectors - some work with no change, others I have to calibrate...
Try it out, hope it helps... -
Does anyone have ideas to sharpen the video i made. Looks good on computer but not on tv. the transition between pictures blurs the images. Is it my tv that causes this?
Does anyone have ideas to sharpen the video i made. Looks good on computer but not on tv. the transition between pictures blurs the images. Is it my tv that causes this?
-
i have an iphone 4s. I can take a video and play it on the 4s just fine, i have always been able to down'load to my pc and view videos with no trouble. But since mid-october 2012, when i download the video to my pc, and try to play it, same as always, I am getting only audio and the video part is black. I can hear everything happening, but no picture. any thoughts?
Try updating to QuickTime 7.7.3. (That has helped a few people who were getting that when trying to play the videos with version 7.7.2.)
-
Video looks great in the simulator but picture shifts to the right on DVD
When I preview my encoded video clips in DVDSP4 using the simulator they look great and are centered perfectly... however, when I write my project to DVD and play it back on a consumer DVD player, the video (picture) is offset to the right by about 15 units (pixels). All my menus look off-centered. How can I keep my clips centered on the written DVD? Help!
DVD Studio Pro 4 Mac OS X (10.4.5)This is certainly a new issue. I haven't seen any reports of it.
Could you tell us how it looks on other set tops or your computer? -
That is the details. When I click on "new tab" it will not open a new tab in the current window. When I click on something that will open a new tab it works that way. I can open new windows, that is not problem This only happened the last week or so.
This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
Your system details show that toolbar in the user agent as AskTbEPC/3.13.1.18107
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Creative Cloud has stopped working. I have the window but nothing within the window. Any help?
Photoshop CC and Bridge are working fine. I can not get the CC updater to work, I only have a blank window. What should I do next?
Maybe you should post on
Adobe Creative Cloud
or
Creative Cloud Download & Install -
I have reset Firefox, then reinstalled, removed all of the extensions and plugins, uninstalled and reinstalled Flashplayer, updated Java, etc. I have also created new profiles, which have the same problem.
The problem does not appear in Safe Mode, which is odd because I have disabled all of the built-in extensions and have run the program in regular mode, and the problem still occurs. Right now I am using no extensions, no plugins, and no themes, and Firefox still freezes for a short period of time whenever I try to open a new window.
This problem does not happen in IE or Chrome. I have not installed any programs recently; the problem started happening randomly.Hi,
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode] also disables the themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. and hardware acceleration - the manual setting is '''Tools''' > '''Options''' > [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u Advanced] > '''General''' > '''Use hardware acceleration when available'''. All these settings/options/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if a theme, or hardware acceleration is causing issues. Disabling/enabling hardware acceleration, and some types of add-ons in normal mode may require a Firefox restart - a quick way to restart Firefox is to press [https://developer.mozilla.org/en-US/docs/Tools/GCLI '''Shift''' + '''F2'''], type '''restart''' and '''Enter'''. -
Video looks great on MBP, horrible when projected....
I am projecting a video that I created in FinalCut on the MBP onto a screen using a Dell 1610X projector Check it out at http://accessories.us.dell.com/sna/products/HomeTheaterProjectors/productdetail.aspx?c=us&l=en&s=bsd&cs=04&sku=224-7541
During my tests, I noticed that the video looks great on the MBP but really dark when projected.
I don't want to re-color the video to make it work on the projector... any thoughts, hints, insight you can provide?
Thanks in advance.You are comparing two different things and expecting them to be equal. That won't work.
The computer monitor emits light, the projection screen reflects light.
The reflectivity of the projection screen plays an important role. A white painted wall will not look the same as a proper screen with a silver or glass bead coating such as those used in movie theaters.
Ambient light from the auditorium or leaking through the drapes will dilute the contrast on the screen.
How are you connecting to the projector? The model you linked has VGA and HDMI inputs. VGA does not have the ability to display the range of color and contrast that your computer does. HDMI might improve things somewhat.
I don't want to re-color the video to make it work on the projector...
Then you have to block as much of the ambient light sources as possible and get a decent screen. -
Using Command + ` toggles ONCE through my Safari windows, but won't cycle BACK. Why?
I read up on how to toggle through my Safari windows by using the Command + ` and it works fine to go forward, but it won't go back to the other window once I use it.
Example: I have 2 (two) open Safari windows, I use Command + ` to move to the other window, but once at that window, using Command + ` again will NOT move me back to my original Safari window. Why?
What keyboard shortcut can I use to go back/circle all the way through? I know about using Expose' and other shortcuts, but I am looking specifically for a KEYBOARD shortcut.
Thank you in advance,
mViceOkay, I was sadly mistaken!!! The bête noire tis back! It seems as if whenever I have a video playing within Safari, it prevents the window cycling to go past the window playing the video.
So lets say I have four windows open:
1=google.com
2=facebook.com
3=projectfreetv.com(home page)
4=breakingbad.projectfreetv.com(actual video).
If I am on #1, I can cycle to #2, #3, and #4, but it stops after its hits #4, (actual video). I then can manually click on #3, and it will cycle to #4, but then it stops. If I manually click on #2, it will go to #3, but stop after #4. If I am on #4, it wont cycle.
So, N.Hillyer, I tried your suggestion, but alas, if I am watching a video, it will not allow me to cycle past that window. What is the deal? And no, it's not just projectfreetv's website, it also prevents cycling from uverse.com, abc.com, mtv.com etc. This is quite frustrating! No matter how many times I clear the cache, once I start watching a video it prevents me from cycling :-( Please help!
Thanks in advance,
mVice -
Close window but not application
I have an application that starts with a splashscreen (with no system chrome) which then loads settings and launches the main application window ( a new window with system chrome). I then want to close the splashscreen window but leave the new window open. The only function that seems to work is air.NativeApplication.nativeApplication.exit() which closes the application not the window.
Appreciate any helpNot working.
You can see the air file here (and the source) : http://www.spiders-design.co.uk/bayamocms.air (it may put a zip extension on the end if so rename it).
On line 41 of splash.html I want a piece of code that will close the window but leave the newly opened window open. -
No Video plays in Program window but works in source window
I'm using the trial version of Premiere Pro CS6 and I can't get any of the videos I import to play in the program window; only the sound works. If I double click the program window in the general area of where the video should play I get the paused image of the video at wherever the timeline is stopped at. In the source window the video and sound plays perfectly.
I'm working on a Win 8 PC. Intel Core i7-3630QM Nvidia GeForce GTX 660M>Win 8 PC. Intel Core i7-3630QM Nvidia GeForce GTX 660M
Back when Win8 first came out, there were several messages about video not working... with the solution, as I remember, being a video driver update
nVidia drivers updates should be from the nVidia site, for your model card, NOT via Windows Update
nVidia Driver Updates http://www.nvidia.com/Download/index.aspx?lang=en-us
How to determine your nVidia driver version
Right click in any open area of the Windows desktop
Select NVIDIA Control Panel from the popup window
Select SYSTEM INFORMATION at the lower left corner
Driver version should be the 1st line in Details
I have a GTX285 using driver 296.10 and Win7 -
As soon as video touches my Source or Program windows the Mac Pro (3,1) shuts down
Linc,
You keep showing up when I search for this problem so I hope you can help.
I'm having the same issue in Premiere and Media Encoder (but not After Effects). My Mac just restarts itself as soon as video is loaded. I can start Premiere and open a project and go through relinking media, but as soon as video touches my Source or Program windows the Mac Pro (3,1) shuts down.
I've fixed the problem temporarily two times. The first time I was troubleshooting what was wrong and wound up putting in my old video card and after that fixed the problem, I switched back to my GTX 680. I also did a driver update. After doing that I was ok for a few days so I figured it was a driver thing or maybe the card just needed to be reseated. Then when it started acting up again I figured something was going on.
So I started searching again and came across one of your posts that recommended removing CUDA. I did that and it worked perfectly for a week until about 20 minutes ago. Crashed in the middle of an edit and now each time I restart Premiere it crashes as soon as video touches my monitors.
I found this post because I specifically searched for "com.nvidia.web.NVDAResmanWeb(8.2.7)" from my Problem Report.
Any thoughts?
Thanks,
Darren
Fri Jan 16 14:43:42 2015
panic(cpu 5 caller 0xffffff7f999066a4): NVRM[0/4:0:0]: Read Error 0x00002100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x8a000000 0xffffff827e13b000 0x0e4000a2, D0, P2/4
Backtrace (CPU 5), Frame : Return Address
0xffffff82776cbbe0 : 0xffffff8018c22f79
0xffffff82776cbc60 : 0xffffff7f999066a4
0xffffff82776cbd20 : 0xffffff7f999e0774
0xffffff82776cbd70 : 0xffffff7f99c1605d
0xffffff82776cbdc0 : 0xffffff7f99c4ea83
0xffffff82776cbe20 : 0xffffff7f99a05b8f
0xffffff82776cbe40 : 0xffffff7f9990ca2d
0xffffff82776cbef0 : 0xffffff80190b0a20
0xffffff82776cbf30 : 0xffffff80190af4c2
0xffffff82776cbf80 : 0xffffff80190af597
0xffffff82776cbfb0 : 0xffffff8018cd7607
Kernel Extensions in backtrace:
com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f998b1000->0xffffff7f99b5cfff
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f992bf000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9989b000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f993a3000
dependency: com.apple.AppleGraphicsDeviceControl(3.6.22)[91D61DEC-2946-3790-8134-B808C016C4 C9]@0xffffff7f998ab000
com.nvidia.web.NVDAGK100HalWeb(8.2.7)[E7D6DD93-319A-39C6-AE77-19D08D903496]@0xf fffff7f99b6c000->0xffffff7f99d36fff
dependency: com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f998b1000
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f992bf000
BSD process name corresponding to current thread: kernel_task
Boot args: nvda_drv=1
Mac OS version:
13F34
<Re-Titled By Host>Thanks for the reply. Sorry for the shortened log. Here's the full thing. By the way, where do you learn to read these things? Are there keywords like "error" that you just learn to look for or is it something for in depth?
Thanks,
Darren
Mon Jan 19 08:02:40 2015
panic(cpu 5 caller 0xffffff7f9cd066a4): NVRM[0/4:0:0]: Read Error 0x00504610: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x8a000000 0xffffff82813fc000 0x0e4000a2, D0, P2/4
Backtrace (CPU 5), Frame : Return Address
0xffffff82927dbaa0 : 0xffffff801c022f79
0xffffff82927dbb20 : 0xffffff7f9cd066a4
0xffffff82927dbbe0 : 0xffffff7f9cde0774
0xffffff82927dbc30 : 0xffffff7f9d03e562
0xffffff82927dbc50 : 0xffffff7f9d015a35
0xffffff82927dbd10 : 0xffffff7f9d015e05
0xffffff82927dbd70 : 0xffffff7f9d016096
0xffffff82927dbdc0 : 0xffffff7f9d04ea83
0xffffff82927dbe20 : 0xffffff7f9ce05b8f
0xffffff82927dbe40 : 0xffffff7f9cd0ca2d
0xffffff82927dbef0 : 0xffffff801c4b0a20
0xffffff82927dbf30 : 0xffffff801c4af4c2
0xffffff82927dbf80 : 0xffffff801c4af597
0xffffff82927dbfb0 : 0xffffff801c0d7607
Kernel Extensions in backtrace:
com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f9ccb1000->0xffffff7f9cf5cfff
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9c6bf000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9cc9b000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9c7a3000
dependency: com.apple.AppleGraphicsDeviceControl(3.6.22)[91D61DEC-2946-3790-8134-B808C016C4 C9]@0xffffff7f9ccab000
com.nvidia.web.NVDAGK100HalWeb(8.2.7)[E7D6DD93-319A-39C6-AE77-19D08D903496]@0xf fffff7f9cf6c000->0xffffff7f9d136fff
dependency: com.nvidia.web.NVDAResmanWeb(8.2.7)[F79A7264-B40F-34B4-9999-D6F903ED90E0]@0xfff fff7f9ccb1000
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9c6bf000
BSD process name corresponding to current thread: kernel_task
Boot args: nvda_drv=1
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide: 0x000000001be00000
Kernel text base: 0xffffff801c000000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 234985677156509
last loaded kext at 1019554175070: com.apple.filesystems.smbfs 2.0.3 (addr 0xffffff7f9e577000, size 335872)
last unloaded kext at 421976737662: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7f9e428000, size 8192)
loaded kexts:
com.nvidia.web.GeForceWeb 8.2.7
com.nvidia.web.NVDAGK100HalWeb 8.2.7
com.nvidia.web.NVDAResmanWeb 8.2.7
com.blackmagic-design.desktopvideo.iokit.driver 10.3.1
com.blackmagic-design.desktopvideo.iokit.framebufferdriver 10.3
com.ATTO.driver.ATTOExpressPCIUl4 4.4.1
com.apple.filesystems.smbfs 2.0.3
com.apple.filesystems.afpfs 11.1
com.apple.nke.asp-tcp 8.0.1
com.apple.filesystems.msdosfs 1.9
com.apple.filesystems.ntfs 3.11
com.apple.iokit.CSRBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleUSBDisplays 360.8.14
com.apple.driver.Oxford_Semi 3.4.1
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.XsanFilter 404
com.apple.driver.AppleIntel8254XEthernet 3.1.4b1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AirPortBrcm43224 700.36.24
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.security.SecureRemotePassword 1.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleUSBHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBAudio 2.9.5f8
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1
com.apple.iokit.IOFireWireSBP2 4.2.6
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.7
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IOAcceleratorFamily 98.23
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleSMC 3.1.8
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOSCSIParallelFamily 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOATAFamily 2.5.2
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
System Profile:
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 3 GHz, 20 GB, SMC 1.25f4
Graphics: NVIDIA GeForce GTX 680, NVIDIA GeForce GTX 680, PCIe, 2048 MB
Memory Module: DIMM Riser B/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser B/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.2.7f3 14616, 3 services, 14 devices, 1 incoming serial ports
Network Service: Ethernet 2, Ethernet, en1
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce GTX 680, Display Controller, Slot-1
PCI Card: NVIDIA GeForce GTX 680, NVDA,Parent, Slot-1
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,0
PCI Card: DeckLink HD Extreme 2, Video, Slot-4
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,1
Serial ATA Device: OWC Mercury EXTREME Pro 6G SSD, 480.1 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
Parallel ATA Device: PIONEER DVD-RW DVR-112D
SCSI Device: SCSI Target Device @ 0
SCSI Device: SCSI Target Device @ 0
USB Device: Hub
USB Device: Keyboard Hub
USB Device: Microsoft Wireless Optical Mouse® 1.00
USB Device: Apple Keyboard
USB Device: USB 2.0 FD
USB Device: Apple Cinema HD Display
USB Device: USB2.0 Hub
USB Device: External
USB Device: NS1068
USB Device: NS1068
USB Device: Hub
USB Device: FCR-HS219/1 Mobile Reader
USB Device: Live! Cam Connect HD VF0750
USB Device: Apple Cinema HD Display
USB Device: Elements 10B8
USB Device: External USB 3.0
USB Device: Bluetooth USB Host Controller
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, OWC Mercury Elite-AL Pro, Up to 400 Mb/sec
Thunderbolt Bus:
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 3 GHz, 20 GB, SMC 1.25f4
Graphics: NVIDIA GeForce GTX 680, NVIDIA GeForce GTX 680, PCIe, 2048 MB
Memory Module: DIMM Riser B/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser B/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser B/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
Memory Module: DIMM Riser A/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80CE, 0x000000463732353142363245363830304600
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.2.7f3 14616, 3 services, 14 devices, 1 incoming serial ports
Network Service: Ethernet 2, Ethernet, en1
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce GTX 680, Display Controller, Slot-1
PCI Card: NVIDIA GeForce GTX 680, NVDA,Parent, Slot-1
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,0
PCI Card: DeckLink HD Extreme 2, Video, Slot-4
PCI Card: ATTO ExpressPCI UL5D LP, SCSI Bus Controller, Slot-2@2,4,1
Serial ATA Device: OWC Mercury EXTREME Pro 6G SSD, 480.1 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Serial ATA Device: WDC WD5000AAKS-41YGA1, 500.11 GB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
Parallel ATA Device: PIONEER DVD-RW DVR-112D
SCSI Device: SCSI Target Device @ 0
SCSI Device: SCSI Target Device @ 0
USB Device: Hub
USB Device: Keyboard Hub
USB Device: Microsoft Wireless Optical Mouse® 1.00
USB Device: Apple Keyboard
USB Device: USB 2.0 FD
USB Device: Apple Cinema HD Display
USB Device: USB2.0 Hub
USB Device: External
USB Device: NS1068
USB Device: NS1068
USB Device: Hub
USB Device: FCR-HS219/1 Mobile Reader
USB Device: Live! Cam Connect HD VF0750
USB Device: Apple Cinema HD Display
USB Device: Elements 10B8
USB Device: External USB 3.0
USB Device: Bluetooth USB Host Controller
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, OWC Mercury Elite-AL Pro, Up to 400 Mb/sec
Thunderbolt Bus:
Maybe you are looking for
-
JTree - node text doesn't fit when shown with icon
When I start off my JTree with a long string text for the node (without any icon...used setLeafIcon( null )... it displays fine. But during the execution of hte program an icon may appear next to a particular node - but when this happens, the icon di
-
ok so my computer crashed and eveyrtime i turned it on it went straight to kernal panic, long story short i got a new harddrive. i reinstalled all my files via time machine, it worked great and everything went back to normal for a bit. i had to get a
-
Throw "java.util.Vector" exception?
In my servlet, I got catch(Throwable t), t.getMessage() is java.util.Vector. Can anyone tell me where I should look into for this problem?
-
When does an app uses my data package
when downloading an app, how do i know if it is using my data pakcage when i run the app? for example, i have an alarm clock app does it use my data package every time i set an alarm? will it tell me in the description of the app, and if so what will
-
to version 5.1.1 and everytime while backing up, around the same spot it says, An error occurred while backing up this ipod. (-43) would you like to continue to update this ipod? Continuing will result in the loss of all data