Video manager- sound but no video when uploaded to...

I hope someone can help with this, i have been searching threads for hours. I can take a video off my pc and put it in to nokia video manager. I can then load it on to my phone. (on to the memory card). Problem is when i play the video on the phone i get sound but no picture. Could someone please give me a step by step instruction on how to solve this. The phone is a nokia 6131i with an additional memory card. Thanks.No technical jargon please!

Hi,
Could you please confirm the video format you are trying to view in NOkia Video Manager? Following details are not meant to be jargon, as its mentioned in the help file of Nokia Video Manager for its normal users.
To be able to use Nokia Video Manager, make sure that you have Nokia PC Suite version 6.83 or newer installed on your PC. For system requirements, refer to Nokia PC Suite Help.
For video playback and conversion, make sure that you have the necessary codecs installed on your PC:
MPEG-2
DivX
xVid
QuickTime
For converting:
All the following formats can be converted to H.264/MPEG-4 AVC (.mp4)
avi, mpeg, mov, wmv, qt
For playing:
3gp, mp4, avi, mpeg, mov, wmv, qt

Similar Messages

Have sound but no picture when i click on the video.Elements 10 on windows 7.Can you help.

Have sound but no picture when i click on the video.Elements 10 on windows 7.Can you help.

Bigal.seamills
What is the driver version for your NVIDIA GeForce GT640?
There is a known issue specific to Premiere Elements 10 and NVIDIA GeForce. The Announcement at the top of this forum tells it all - detailed description of problem, references, fixes, and fix details.
The following is a copy paste of that Announcement....
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card
and you are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your
first line of troubleshooting needs to be rolling back the video card driver version instead of assuring that
it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and
unexplained workflow glitches specific to the Premiere Elements 10 user whose Windows computer
has a NVIDIA GeForce video card. If this applies to you, then the “user to user” remedy is to roll back
the NVIDIA GeForce video card driver as far as is necessary to get rid of the problems. The typical driver
roll back has gone back as far as March – July 2013 in order to get a working Premiere Elements 10.
Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found NVIDIA Driver Downloads - Advanced Search
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for
the driver roll back can be found http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
Please refer to the following for the driver version history of your NVIDIA card
Based on history, you should be using
GeForce 320.18 Driver
320.18
May 23, 2013
Please review and consider and then let us know the results.
Thank you.
ATR

I've bought a Digital AV Adapter to be able to connect my Iphone 4g to the TV. I only get sound but no picture when I look at TVPlay-canals. Photo gallery OK. I have updated my phone to the latest version IOS. Any solution?

I've bought a Digital AV Adapter to be able to connect my Iphone 4g to the TV. I only get sound but no picture when I look at TVPlay-canals. Photo gallery OK. I have updated my phone to the latest version IOS. Any solution?

Welcome to the Apple Community.
Your phone doesn't do mirroring, only the 4S will do that. It only does basic AirPlay.
Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).

Why won't CSS changes save - Are Reflected Locally, but not there when uploaded.

I have recently re-installed Dreamweaver CC 2014.1.1. I am editing an existing site http://www.travelight.tv/test.html. CSS changes won't save (i.e ".righthalf" and <strong> and H3.) I finally replaced the class with a table for the sake of time. Still can't save <strong> and H3 changes. CSS Designer Panel correctly shows the H3 font and the hex color (ee5e33) - but the color palate shows black. The uploaded document reflects gray. The changes are reflected properly locally, but not when uploaded to server. The time/date stamp doesn't update, despite saving several times. What am I missing?

Sorry about that, I managed to get the test URL wrong. http://www.travelight.tv/test/index.html. I had to remove the righthalf class from the document, but the <strong> and <h3> tags are still having issues.As for the location, I am opening the one that is linked to the document from the bar at the top of the document - it is the only one named travelight.css. When I logged in this morning, I noticed that it is showing the icon as a Wordpad document even though the File Type shows it as a Cascading Style Sheet - I have tried saving it as an html file and have re-created it, but it remains a Wordpad document. Below is the a screen shot of the folder.

Poor quality video when uploading to Youtube

Hi there
I'm using Premiere Pro CS5.5 and I've exported a video clip along with a after effects project (using dynamic link)
The video quality is fine until I upload it to youtube.
I'm a newbie to Premiere Pro so any help would be much appreciated.
I've attached a zip file along with the project files
http://www.4shared.com/zip/Uu4cPZse/Premier_Pro_Project.html
any help would be much appreciated.
Mark

Mark,
Thanks for the link.
Let's step back just a bit please.
Can you give us the full details of your Sequence Settings, and your Source Footage?
You mention using ADL (Adobe Dynamic Link) between PrPro and AE. Can you give us a description of what that involves?
Last, can you give us the full details of your Export settings?
Thanks, and good luck,
Hunt

Sound but no picture when importing.

Hi there,
I wonder if you can help.
A company I work with recently gave me a hard drive with various .mov files on for me to present to a client.
However, I can not get the picture of the videos to play, only the sound.
I've tried opening it in Quicktime, FCP, VLC player, Mpeg Streamclip etc, and each one gives a blank (black or white) screen, and just the sound.
Trying to move the footage into a FCP timeline results in the message 'Codec could not be opened'.
The file details are as follows:
Blackmagic 8 bit (2vuy), 720x576, millions, 16-bit integer (Little Endian), 48,000 khz, FPS 25
Any advice you may be able to give about how to open this file would be appreciated.
Many thanks,

As far as I know, you'll need to install the Blackmagic drivers for the Decklink card. It will also install the codecs.
[blackmagic software downloads|http://www.blackmagic-design.com/support/software>
Select the Decklink driver.
Do read the readme first. You might need an earlier driver version for your version of FCP, Quicktime and or OS X.
The archive of Blackmagic Drivers can be found here:
[Decklink Driver archive|http://www.blackmagic-design.com/support/software/archive/?s=DeckLink]
Rienk

IWeb snippets working locally but not working when uploaded to ISP

I am using iWeb 3.0.2. When I add an HTML snippet to a page to add an item to a shopping cart [ADD TO CART], then publish and view site, the snippet works perfectly.
However when I upload the page to the ISP, the snippet is not displayed even though I can see all the necessary 'widget1_markup.html' present in the page source, and when I browse for that widget URL it is present.
Is something missing from the ISP to process this type of facility, or is it something else.
Your suggestions gratefully received.

Welcome to the Apple Discussions. 3What's the URL of your site so we can examine it first hand? While this is just a guess without looking at your site I'd say that not all of the files in your site's Scripts folder are getting uploaded to the server.
How are you uploading the files? With iWeb's FTP client or a 3rd party client? If it's iWeb's client, publish your site to a folder on your hard drive and use the free Cyberduck client to upload the files.
OT

Sound, but no vision when streaming from iPad2 to ATV2.

Have downloaded FilmOn app and trying to stream a programme from iPad2 to ATV2 using AirPlay. Getting sound on TV but no vision.
Any ideas?

Hard to say, each store will offer different apps and there so many. The iTunes store has a section for airplay enabled apps. IOS 5 will introduce wireless mirroring though so that will help.
http://gizmodo.com/5781794/how-to-find-airplay+enabled-apps

Error: java.lang.OutOfMemoryError when uploading CSV files to web server

Hi experts,
I have made a JSP page from which clients load csv files to web server. I am using Tomca 4.1 as my web server and JDK 1.3.1_09.
The system works fine when uploadiing small csv files, but it crashes when uploading large CSV files.
It gives me the following error:
java.lang.OutOfMemoryError
     <<no stack trace available>>
This is the code that I used to load files....
<%
String saveFile = "";
String contentType = request.getContentType();
if ((contentType != null) && (contentType.indexOf("multipart/form-data") >= 0))
     DataInputStream in = new DataInputStream(request.getInputStream());
     int formDataLength = request.getContentLength();
     byte dataBytes[] = new byte[formDataLength];
     int byteRead = 0;
     int totalBytesRead = 0;
     while (totalBytesRead < formDataLength)
          byteRead = in.read(dataBytes, totalBytesRead, formDataLength);
          totalBytesRead += byteRead;
     String file = new String(dataBytes);
     saveFile = file.substring(file.indexOf("filename=\"") + 10);
     saveFile = saveFile.substring(0, saveFile.indexOf("\n"));
     saveFile = saveFile.substring(saveFile.lastIndexOf("\\") + 1,saveFile.indexOf("\""));
     int lastIndex = contentType.lastIndexOf("=");
     String boundary = contentType.substring(lastIndex + 1,contentType.length());
     int pos;
     pos = file.indexOf("filename=\"");
     pos = file.indexOf("\n", pos) + 1;
     pos = file.indexOf("\n", pos) + 1;
     pos = file.indexOf("\n", pos) + 1;
     int boundaryLocation = file.indexOf(boundary, pos) - 4;
     int startPos = ((file.substring(0, pos)).getBytes()).length;
     int endPos = ((file.substring(0, boundaryLocation)).getBytes()).length;
     String folder = "f:/Program Files/Apache Group/Tomcat 4.1/webapps/broadcast/file/";
     //String folder = "10.28.12.58/bulksms/";
     FileOutputStream fileOut = new FileOutputStream(folder + saveFile);
     //out.print("Saved here: " + saveFile);
     //fileOut.write(dataBytes);
     fileOut.write(dataBytes, startPos, (endPos - startPos));
     fileOut.flush();
     fileOut.close();
     out.println("File loaded successfully");
//f:/Program Files/Apache Group/Tomcat 4.1/webapps/sms/file/
%>
Please can anyone help me solve this problem for me...
Thanx...
Deepak

I know it may be hard to throw away all this code, but consider using the jakarta fileupload component.
I think it would simplify your code down to
// Create a factory for disk-based file items
FileItemFactory factory = new DiskFileItemFactory();
// Create a new file upload handler
ServletFileUpload upload = new ServletFileUpload(factory);
// Parse the request
List /* FileItem */ items = upload.parseRequest(request);
// Process the uploaded items
Iterator iter = items.iterator();
while (iter.hasNext()) {
    FileItem item = (FileItem) iter.next();
    if (item.isFormField()) {
        processFormField(item);
    } else {
        // item is a file. write it
        File saveFolder = application.getRealPath("/file");
        File uploadedFile = new File(saveFolder, item.getName());
        item.write(uploadedFile);
}Most of this code was hijacked from http://jakarta.apache.org/commons/fileupload/using.html
Check it out. It will solve your memory problem by writing the file to disk temporarily if necessary.
Cheers,
evnafets

K1 - Video captured by K1 has sound when played onboard, but muted when uploaded and played in PC

I am not sure if I have done anything wrong. But, all video recordings that I used K1 to capture will only have sound played out while on K1. When the videos are uploaded to my PC (Win7-64bit Pro) and played in WMP, the sound disappeared.
On the lower left corner of WMP below the glider bar, there is a wavy block. When I put the cursor on it, it shows the message: "Network is too busy to play file at original quality".
Any suggestions are appreciated.
H

Hi
I presume that the resulting "internet" video did contain the original 'dialogue' audio, just not your additional music?
When exporting to a movie, there is a dialog box where you can select which of the original movie's audio tracks to include (the "dialogue" audio). If you choose to keep this, you will get a video with multiple audio tracks (Dialogue and Music). Often the additional tracks are removed when uploading.
The solution is to import the original "dialogue" audio into Logic, mix appropriately, then export to movie *without* the original track from the original movie (ie you get 1 audio track with everything in it, directly from Logic).
HTH
CCT

Sound, but no video when streaming a quicktime file through shockwave

When I stream a quicktime movie in the html file hosted on localhost using the Apache server, I get sound but no video. I saved the quicktime movie as part of my cast, linked to http://localhost/~username/mymovie.mov
When I play the quicktime movie itself in my browser, or in a projector, or just within director, the video and sound play simultaneously. But in the browser after converting the dir movie to a dcr and html file, and hosting the dcr and html files on the server, when I open the html file in my browser, only the sound plays. Anyone else encounter similar problems? Any help would be appreciated!

Hi guys,
here's some quick notes on how I handle shockwave videos with my projects.
I tend to find that .swf format videos work best under all browsers using shockwave
easiest way:
you can do a standard import of a .swf video straight into a your cast. (not linked)
the problem with this is it tends to create a large dcr file for you users to download
'preloadnetthing' way:
upload your videos to a url location - something like www.mywebsite.com/the_programs_title/dsmedia/videos/video1.swf
(I never use capital letters or spaces)
file - import - internet - <enter the full url pathname to the file>
this will add the file to the add list
set media to : Link to External File (Don't use Standard Import)
now press Import
at this point Director will try to connect to your url - and do a trial download of the linked file
if it works you should now see a new linked video cast member added to your cast
if it fails - (which mine tend to do half the time?) - try it again until it works.
Here I normally view the linked videos property inspector - and change its settings - I turn loop off - and make sure preload is not set.
now comes the code part
To get your videos to play correctly, you will need to preload them into memory, before you play them.
(although it's possible to stream videos - I've never been able to get this to work well - there is a whole bunch of lingo code to deal with streaming videos)
*** a frame script for preloading a swf video ***
on beginSprite
floatPrecision = 2
tellStreamStatus(TRUE)
global gVideosName
set TEMP to "http://www.mywebsite.com/my_program/dswmedia/videos/" & gVideosName & ".swf"
global mynetID
set mynetID = preloadNetThing(TEMP)
set the text of cast "preload_results" to "0 %"
end beginSprite
on exitFrame
floatPrecision = 2
global mynetID
pStatList = getStreamStatus(mynetID)
if (pStatList.bytesSoFar > 0) then
    pPercentDone = (pStatList.bytesSoFar * 100) / pStatList.bytesTotal
    if pPercentDone > 99 then go NEXT
end if
set the text of cast "preload_results" to ((the string of pPercentDone) & " %")
go loop
end exitFrame
*** a frame script for playing a swf video ***
on beginSprite
-- I create a blank 'place holder' cast member (a black filled rectangle) the same size as my video, on to my stage - into sprite 1
set the visible of sprite 1 to TRUE
set the puppet of sprite 1 to TRUE
global gVideosName -- REM the name of my linked video cast member
set the castNum of sprite 1 to cast gVideoName
updateStage
sprite(1).play()
updateStage
end beginSprite
on mouseDown
sprite(1).stop() -- This stops the SWF movie playing !!!
end mouseDown
on keyDown
sprite(1).stop() -- This stops the SWF movie playing !!!
end keyDown
on exitFrame
    if sprite(1).playing = false then
       set the puppet of sprite 1 to FALSE
       go to "somewhere" -- REM somewhere you want to go to after the video have finished.
       abort
    end if
go loop
end exitFrame

I am having trouble keeping the quality of my video when exporting to my external drive. I change the kind to "original" but when I view the video from the external drive once exported, the sound and picture are distorted.

I am having trouble keeping the quality of my video when exporting to my external hard drive. I have tried to export from iphoto with changing kind to "original" but when I open the video from the external drive the quality is effected. I have also tried copying the video to my desktop and then dragging and dropping onto the drive...same problem. Any suggestions? I would like to save everything to my external drive so that I can delete all of iphoto library and then reimport to correct a few things.

The file sizes are identical. In the finder I did a search for all .mov files. Then when they came up, I went through them and named each one so that they would be easier to find. I am a new mac user and am used to windows. I realized later that I should not have done this....with a mac files should be named within iphoto app...not finder....When I went to open the videos in iphoto, it wouldn't allow me. I had to go into finder, copy to desktop and reimport into iphoto. Then the videos worked again. However, I had the problem with the poor video quality when copied to external drive before that. Actually the first problem I had was when I copied to ext drive...videos were copying as an image...so I learned that you have to change "kind" to original before exporting....then that problem was solved...now they are videos, not images but not of a great quality. Skips, sound and images are not in sync...etc...

How can I email a video clip I downloaded into my iPhoto library to my friends? I tried creating an email and attaching the clip but there is no sound and no picture when the 5 minute attachment "plays." How can I file= export it to them from iPhoto?

How can I email a video clip I downloaded into my iPhoto library to my friends? I tried creating an email and attaching the clip but there is no sound and no picture when the 5 minute attachment "plays." How can I file=>export it to them from iPhoto?

Have them install Quicktime on their PC's from Apple's website, that's the easiest fix.

Uploaded my pictures from my iPhone to my MacBook- Some of the videos I made show that they imported and play sound, but no picture- are they gone?

I Uploaded my pictures from my iPhone to my MacBook… Some of the videos I made show that they imported and play sound, but no picture… are they gone?Becuase they offer to delete what was imported, so to save space i did... Is there anything I can do to restore the picture?

Do your videos play in QuickTime Playerwhen you reveal one of them in the Finder with "File > Reveal > Original"? Try to open the revealed movie in QuickTime and see if it plays.
Check the format of the movie. You can see it in the Inspector in QuickTime Player from the "WIndow" menu: Window > Show Inspector.
iPhoto does not support all movie formats and codecs that QuickTime player can play, and not all frame rates.
See: Using AVCHD video with iPhoto '11
If the movie does not play in QuickTime Player either, install QuickTime 7 for more codecs.

Video plays in swfiles but not when uploaded to website

Hi, does anyone have any idea why videos embedded in a swf
file play okay in the swf file or when tested as a movie on the CS3
stage, but when uploaded to my website will not play? I am
completely baffled by this.
My website link is at
http://www.marykingmedia.com/marykingmediafive/index.html
On the Bolivia and Chile page the videos do not appear once
the video is uploaded to my website. I have no idea why this should
be when the actual videos play perfectly well within the swf file
itself. I have put the encoded flash videos inside the same folder
as the swf file and uploaded everything, but no joy.
The swf file is 2.97 MB; not sure if that would present any
problem or not once uploaded
My video on another project plays fine at
http://www.marykingmedia.com/marykingmediafour/index.html
Can anyone cast any light on what the problem is with my
South America project?
Thanking you all..

Hi xchanin, thanks for your feedback. I dont quite understand
what you mean by this part here ... but if you do that process a
couple of times (with the same .mov file) you get the same .flv but
the name of your video is incremented by one each time?
Pretty well much I followed this tutorial
http://multimedia.journalism.berkeley.edu/tutorials/flash/building-flash-templates/adding- video/
I put a FLVPlayback component on my Flash stage.
I encoded my videos in the CS3 video encoder and followed the
settings given in the above tutorial link. I did not resize or crop
the videos, I set the quality to medium and I gave my videos a name
prior to encoding it.
After encoding the film, I highlighted the FLVPlayback
Component and in the parameters found the content path and then
linked that to my encoded videos one by one. Then I saved my
worked, played it in the movie tester and then I exported my swf
file to my Dreamweaver folder, but I did rename my exported file
(it is not the same name as my Fla file). Could that make a
difference? I also put my Flv videos in the same folder as my swf
file and uploaded them to my server. I put the swf file on my html
page and then uploaded that to my server. My website shows the swf
file but the videos do not appear at all. However, the videos do
appear in the actual swf file when I play that.
I would be grateful to know if you see anything wrong with my
working process here. Could the renaming of the exported file have
caused the problem?
Thanking you.

Video manager- sound but no video when uploaded to...

Similar Messages

Maybe you are looking for