Video mirroring of Ipad2 using component cable only displays videos but not home screen

I watched videos online that show that I should be able to view my ipad2 home screen and apps while I'm video mirroring on my television but I can't see anything (only hear the audio) except when I play videos or watch youtube and use apps that have the TV Out function...Is there anyway to fix it?

I mean I can only view videos that I play on my TV from my Ipad2 but other than that I can't see my Ipad home screen on TV or any other apps that I open, though I can hear the audio. I'm using a component cable. I thought that I should be able to view my home screen etc with the cable?

Similar Messages

  • HT204291 Using Azul media player app on my ipad  Apple tv will only display sound but not video from movies.  Any ideas on a fix.  I set mirroring to on but it still does not display video.  It will display photos and video recorded from my iphone.

    Using Azul media player app on my ipad  Apple tv will only display sound but not video from movies.  Any ideas on a fix.  I set mirroring to on but it still does not display video.  It will display photos and video recorded from my iphone.

    Here are the steps for AirPlay:
    Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
    On your iPhone 4S/5 or iPad 2 or 3, double-click the Home  Button to view your recently-used apps.
    Swipe all the way to the right to until you see the  icon.
    Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
    Tap the  icon to see the list of available AirPlay devices.
    Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
    Now you should be seeing your iPad/iPhone on your TV.
    Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
    When you do that you will see an Orange screen
    Now click "Done" and play the video you want to watch and it will AirPlay

  • I hooked my laptop to my hdtv using vga cable only have video how to connect audio to tv

    how to connect audio from computer to hdtv using vga cable for video.

    Hi:
    You'll have to run a cable from your headphone out jack into your audio in jack on your TV.
    Paul

  • When I use airplay it only displays the audio not the video

    How can i display the image and the audio on airplay.  It only shows the audio when I use airplay.  Please need help.

    This is usually due to the app not allowing video to airplay for nebulous rights reasons.
    Check the app provider's website or itunes store reviews.
    AC

  • Having difficulty -- via airplay -- w/ streaming sites from ipad2 to g2 apple tv -- get audio but not video -- what gives???

    having difficulty - via airplay --w/ streaming sites from ipad2 to g2 apple tv -- get audio but not video -- what gives???

    What site are you trying to watch?  I just tested 3.  The you tube app streams from the pad to apple tv fine, as long as the source video format is ok.  Checked a site called funny or die.com. Most of the videosmthere stream to apple tv fine.  A few have a different format, and do audio only.  Netflix does not stream at all, but you can get to netflix directly from apple tv.  Whether or not it streams is directly related to the format of the video.  Some do, some dont.

  • I use my camera for video and photos.  When I download my videos to my ipad1 using the camera connection kit, they will not play on my ipad. Is there a way I can get them to play?

    I use my camera for video and photos.  When I download my videos to my ipad1 using the camera connection kit, they will not play.
    Does anyone know how I can make this work?

    Yvonne-
    I haven't tried videos on my camera yet.  Do you use the Videos App to play them?  I don't think they will play in the Photos App.
    If yours are in a format that is not in Vazandrew's list, you may need to sync them to your computer and convert them to M4V or MP4 format.  You can use a program like HandBrake to do the conversion.  <HandBrake>  Once converted, you can sync them back to the iPad and they should play.
    This may not meet your needs, but the alternative appears to be getting a different camera.  I don't know of another Video App that might work.
    Fred

  • When using facetime it only displays a picture and cannot view myself talking

    when using facetime it only displays a picture and cannot view myself talking. i can call out but the other person cannot view me. what am i doing wrong? how can i fix this?

    See:
    * [[Images or animations do not show]]
    * http://kb.mozillazine.org/Images_or_animations_do_not_load
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Did IOS8 upgrade w/iPhone5 / lost names associated when using e-mail - only displaying telephone numbers / what are the steps to correct to show names?

    Did IOS8 upgrade w/iPhone5 / lost names associated when using e-mail - only displaying telephone numbers / what are the steps to correct to show names?

    maybe OP want to extract all numbers from his inbox using regular expressions?

  • I attached my HDMI cable to my Samsung Tv. The "classic" apple screen comes up, but not the screen on my MacBook. Therefore I can't access my laptop.

    I attached my HDMI cable to my Samsung Tv. The "classic" apple screen comes up, but not the screen on my MacBook. Therefore I can't access my laptop.

    You have the display set in Extended Desktop mode with the MacBook as the main screen. The Menu Bar and Dock will be on the MacBook display and your background screen on the TV but you can move the cursor onto the TV screen.
    In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen.
    The TV will now have the Dock and Menu Bar and windows will open on it. But you can move the cursor to the MacBook screen and move windows from the TV over to the MacBook screen.
    You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse.  http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
    Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box. That will give you the same screen at the same resolution on both the MacBook and the external monitor.

  • I have an iPhone 4 using iOS 7.1.2. On my home screen at the email icon it shows I have over 11,000 unread emails. I have no emails and am not receiving any. Ipad shows I am receiving emails ok. Om my phone deleted folder is empty as well as Sent.

    I have an iPhone 4 using iOS 7.1.2. On my home screen at the email icon in red it shows I have 11,193 emails to be read.  I have no mail in Inbox, Drafts, Sent, or Trash. Where did this come from and how do I get rid of it. The number is printed in read on top of the blue and white emaiI icon. I contacted my cable company and through their website I can check my email. In doing this it showed I had 25 unread emails. Also, my iPad 2 is receiving emails fine.  So the problem is with the iPhone 4. What can I do to get rid of the number and make my mail operational? 

    Hello Kizzyk,
    I would start with taking a look at the settings to make sure that you are able to send and receive messages. If everything looks good then the next step would be to remove the accounts and add them back in. Take a look at the article below for more information and details on how to troubleshoot your issue further.
    Get help with Mail on iPhone, iPad, and iPod touch
    http://support.apple.com/en-us/TS3899
    Regards,
    -Norm G. 

  • Does it matter if the lightning cable is plugged in but not connected to an electrical outlet? Will this drain the ipad battery?

    Does it matter if the lightning cable is plugged in but not connected to an electrical outlet? Will this drain the ipad battery? We use an ipad cart at school, and some of the teachers will connect all the ipads up to the cart, but then neglect to power up the cart. The laptop with the cart has already had the battery wrecked because of this (within a two month period), and I am concerned the ipads may have an issue if this continues to happen. I need some reassurance before I make the other teachers paranoid!

    ok this one is kind in the gray area for me. I say if it is plugged in to a power up cart but not plugged in to a outlet, then all is is doing is not charing, and of course lossing a charge over time in standby, not really causing any issues. User guide and apple sites say it will drain the battery life.
    Important: The iPad battery may drain instead of charge if iPad is connected to a computer that’s turned off or is in sleep or standby mode, to a USB hub, or to the USB port on a keyboard.
    however “Battery life” means the time your iPad will run before it must be recharged.
    so I think it will be ok, as long as you charge it as usaul it should be fine.
    just use these links for and understanding for batteries and the ipad, of course the user guide.

  • I have to open website which opens only with google but not from safari. how can i get such google?

    i have a website which opens only with google, but not google from safari. how i can get google w/o using safari?

    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

  • Captivate Variables Only Display in Template--Not .CP File

    Hi There,
    I'm new to Captivate 4, but have been using Captivate for roughly four years or so. I have used the $$cpInfoCurrentSlide$$ variable in a template. When I use the Preview function in the template I can see the slide numbers as they should be displayed. However, when I create a Captivate file based on the template, the slide numbers don't display at all. Is this normal? I'm guessing I used the variable properly or it wouldn't even display in the template, but any light you could shed on this would be very helpful. BTW, I searched the knowledgebase as well as this forum and couldn't find any info on this issue, so please pardon me if the info is there and I didn't find it. I would be happy to send an individual contributor the template and .cp files if necessary, but am hesitant to post them here. Many thanks in advance for your help.
    Jayney

    Hi There,
    I just posted a reply to the following:
    http://forums.adobe.com/message/2293463
    Unfortunately, the original poster's fix doesn't seem to be working for
    me. I just wanted to bring this to your attention because I thought this
    might be easy to miss. Many thanks for any help you can provide.
    Jayney
    Jayney Wallick
    Instructional Designer/Manpower Professional
    Remote phone (try this first): 206-286-6691
    Office phone: 425-250-0233
    [email protected]
    Captiv8r <[email protected]>
    09/28/2009 03:05 PM
    Please respond to
    [email protected]
    To
    Jayney WALLICK-ECON/USBVE01/TDE/non-AREVA-TD@ATD
    cc
    Subject
    Captivate Variables Only Display in Template--Not .CP File
    Hi there
    I'd be happy to take a look for you.
    rstone75 (at) kc (dot) rr (dot) com
    Cheers... Rick
    http://www.robowizard.com/pc.gif
    Helpful and Handy Links
    http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=5
    http://www.ShowMeSolutions.biz
    http://sorcererstone.wordpress.com/
    http://www.gooberguides.com

  • How to use the dll  created by c++ but not write a jni wrapper around

    how to use the dll created by c++ but not write a jni wrapper around through a java program. now I can't access that dll like this directly from java.

    Your question is unclear. (You haven't said what dll you are talking about.)
    But:
    If you are talking about an existing dll, then the only alternative to writing a wrapper is to use one of the wrapper generators floating around. Do a search on JACE.
    If you are talking about a dll you are writing, then run jah and get the interface to match java right away; then you won't have to write a wrapper.

  • If I try to download a pdf document, it appears in the tab but not on screen. I am using Firefox. I tried it with Safari and the document appeared on screen but it wouldn't print.

    If I try to download a pdf document, details appear in the tab but not on screen. I am using Firefox. If I use Safari it appears on the screen but the print is blank.

    Hi...
    Quit your browsers.
    Open the Finder.
    From the menu bar click Go > Go to Folder
    Typs this exactly as you see it here:    /Library/Internet Plug-Ins
    Click Go
    Move the Adobe PDF Browser plugin  (or just PDF Browser plugin) to the Trash.
    Relaunch either Firefox or Safarai and try downloading a PDF document.

Maybe you are looking for

  • Business Partner Creation ( Master Tenant with Customer Account)

    Hello Experts Am trying to create a master tenant with a customer account, but as i save the business partner there is no corresponding creation of the master tenant with a customer account in the company code. The system only generates a business pa

  • ABAP calling Webservice

    Hello, Please guide me how i can call webservice i.e EJB develped in Java Stack from ABAP program. Please let me know if some blog is avalabilbe for same. Thanks a lot in advance. regards, Vikrant

  • Write String to Spreadsheet

    Hello, I have two Booleans and an alphanumeric string that I want to write to a spreadsheet.  The attached code changes the two Booleans to strings, builds an array comprised of the two Booleans and the alphanumeric string and writes the data in a sp

  • Want to avoid temp tables

    Hi. I need some suggestion desparately.I am new to ODI and i have to learn myself. I dont want temp tables to be created. is it possible? Thanks

  • Connecting ipod nano to acura tsx

    When connecting ipod nano to my Acura TSX, you can see what is playing but can not hear it. Tried a different cable then connected my iphone and it works fine.