Video (mov) in iPhoto 8 library seen in iPhoto 8 but not iMovie 8.

After installing iLife 08, I can see my photos and videos in iPhoto 08, and the videos (mov from Kodak V570) play fine in QT. However, in iMovie 08, I cannot see all of my videos in the event library (though the manual leads me to believe I should be able to see them). I can see some of my videos (the ones that I had on the computer when I installed iMovie 08). I cannot see any video that I imported into the iPhoto library after initial install from within the iMovie 08 event library. If I try to import the video, all of the video files within the iPhoto library are grayed out. I can import the videos (mov) just fine into iMovie06.
Much discussion on this topic within the iMovie08 forum. No solutions, though. A person suggested that the topic be raised in the iPhoto forum, since the iPhoto library in iPhoto08 is the library for iMovie08. Appreciate any help.

I have exactly the same problem as well... I upgraded from iMovie HD to iMovie'08. I can only see one video clip from my iPhoto library but I have over hundreds of these clips... not sure why. I am using *.AVI video files.

Similar Messages

Is there a way to move photos directly from one iPhoto library to another iPhoto library?

Is there a way to move photos directly from one iPhoto library to another iPhoto library?

Not using iPhoto - Aperture can or iPhoto Library Manager can
LN

I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it. I need the videos out of there. I have tried every way I can think of.

Like the title says...
I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it. I need the videos out of there. I have tried every way I can think of.
I have also tried from the iphoto side, to export the videos or share them to final cut. I have had no luck.
I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible. I see this on forums and youtube videos of the older versions.
However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
Thank You for the Help

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

My photos disappear from my iPhoto after a crash of iPhoto, I've restored the entire iPhoto library through time machine but still i have no photos in my iPhoto

I have an iMac which I've upgraded to Yosemite. then I experienced a crash on iPhoto and needed to restore the entire (135 GB) iPhoto library through Time machine. Now I can see the iPhoto library through finder but can't move them to iphoto
Can you help me please? thanks so much!

Try the following on your library:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
2 - select the library you want to add from those in the selection window.
3 - make sure that in the rebuild window the checkbox "Scavange orphaned photos" is checked.
4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
5 - in the next window name the new library and select the location you want it to be placed. Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.

Old iPhoto library into new iPhoto

Ok, to begin with let me apologise in advance for how this question is written. I am not the most savvy person when it comes to this type of thing but I am trying, I promise. So, I'm on my second MacBook Pro because my old one died a death after 5 years (and a toddlers intervention), a helpful guy at at Apple store got the harddrive out for me (a shiny piece of silver) which he said held all of my photos and music - the only two things I was worried about. With the help of this drive type thing that I plug this harddrive into, I was able to move across all of my music onto my new MacBook Pro but knowing that my photos would be a bigger job, I left that until I had more time. Well, I have just attempted to do this and it simply wont. It says its something to do with versions numbers. I can drag the library from the old harddrive (just the whole thing as I don't know if there is a specific sub-file that I need) onto my new desktop but when I think try to drag the old library into my new iPhoto, it simply wont read it. I have no idea what my old version number is but it would be pretty old, perhaps last updated 2-3 years ago. My new iPhoto library is version 9.2.3.
In short - what is this girl doing wrong? Please tell me I haven't lost all of my old photos forever? The man in the store said it was fairly straight forward, he could have migrated things at the time but I didn't buy my new MacBook Pro until a week later and my old harddrive had already been removed. All I want to do is have all my old photos with my new photos in one place, I am not worried about any tags or names or faces or place information that is saved with the old photos as I really only use it for a storage type place instead of utilising all the cool options (I should, I know) so if there is an easy way that your Grandma would be able to manage, please let me know.
Thank you!

drinsurrey wrote:
Ok, to begin with let me apologise in advance for how this question is written. I am not the most savvy person when it comes to this type of thing but I am trying, I promise. So, I'm on my second MacBook Pro because my old one died a death after 5 years (and a toddlers intervention), a helpful guy at at Apple store got the harddrive out for me (a shiny piece of silver) which he said held all of my photos and music - the only two things I was worried about. With the help of this drive type thing that I plug this harddrive into, I was able to move across all of my music onto my new MacBook Pro but knowing that my photos would be a bigger job, I left that until I had more time. Well, I have just attempted to do this and it simply wont. It says its something to do with versions numbers. I can drag the library from the old harddrive (just the whole thing as I don't know if there is a specific sub-file that I need) onto my new desktop but when I think try to drag the old library into my new iPhoto, it simply wont read it. I have no idea what my old version number is but it would be pretty old, perhaps last updated 2-3 years ago. My new iPhoto library is version 9.2.3.
In short - what is this girl doing wrong? Please tell me I haven't lost all of my old photos forever? The man in the store said it was fairly straight forward, he could have migrated things at the time but I didn't buy my new MacBook Pro until a week later and my old harddrive had already been removed. All I want to do is have all my old photos with my new photos in one place, I am not worried about any tags or names or faces or place information that is saved with the old photos as I really only use it for a storage type place instead of utilising all the cool options (I should, I know) so if there is an easy way that your Grandma would be able to manage, please let me know.
Thank you!
You don't have to drag the library to the iPhoto icon. You have to double-click the iPhoto library to open iPhoto with it, and then, you should be able to access to the photos of your library. I recommend you to copy the iPhoto library to a different folder before doing this, because iPhoto will upgrade the library to make it work with your version, and if this fails, you will lose all your photos

Iphoto Library Missing from Iphoto - Help

I have recently upgraded to Leopard and last night upgraded to the most recent version of iPhoto. When I opened iphoto only the last import I did appeared in the library. In older iPhoto versions it showed the actual file structure with pictures in them but now all I see is a single file called iphoto library. To recover the pictures in iPhoto I dragged the iphoto library file to iphoto. It then imported them, but I believe also took up significant hard drive space to do it. My pictures at first blush appear to be back in the library, though I am not sure all of them as I have 17,000. I do have two iphoto libraries on my computer. Perhaps the upgrades caused iphoto to look in the wrong place.
Did I do this incorrectly? Can I find a way to make sure that I am not using twice the hard drive space I should? What might have caused this?

Well, It would seem the only problems I have now is that I have two of everything and my thumbnails appear as if they are pictures
Well that's a direct result of
To recover the pictures in iPhoto I dragged the iphoto library file to iphoto. It then imported them,
As the iPhoto Library Folder contains Original, Modified and Thumbnail versions.
Given that you also dragged into a damaged database, I think your best bet is to start over. Do you have a back up? If not then you'll need to create and populate a new library.
To create and populate a new library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library. *However br sure that you do not bring over any file smaller than 100kb, as these will only be the thumbnails*
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
If you still have duplicates then try using Duplicate Annihilator
Regards
TD

How do I get photos from the iPhoto import folder to the iPhoto library? It uploaded, but hung while deleting from my camera, so no imported photos are in the iPhoto library.

How do I get photos from the iPhoto import folder to the iPhoto library? It uploaded, but hung while deleting from my camera, so no imported photos are in the iPhoto library. I watched it upload about 400 photos, one by one. They're somewhere, but they don't appear in the iPhoto library. As iPhoto was deleting them from my camera, it got hung up, then a message came "you should eject before disconnecting a device." I hadn't touched the camera. The message came by itself. I couldn't get iPhoto to respond, so I disconnected the camera and did a Force Quit. Opening it back up, the pictures were gone. Can somebody help me?

What version of iPhoto are you running? Assuming it's iPhoto 9 or later Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

When I open iPhoto this appears- "Your photo library is either in use by another application or has become unreadable" I have not used iPhoto before on this computer. I downloaded iPhoto Library Manager as suggested but nothing happened. What should I do?

When I open iPhoto this appears- "Your photo library is either in use by another application or has become unreadable" I have not used iPhoto before on this computer. I downloaded iPhoto Library Manager as suggested but nothing happened. What should I do?

I think the usual advice is to use the Rebuild command in Library Manager.
Regards
TD

HT5037 I installed the iphoto library upgrader and iphoto still will not open

I installed the iphoto library upgrader and iphoto still will not open. can anyone solve this?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

HT4436 I have a laptop Mac and an IPad, and would like to transfer pictures, videos, etc from the ipad to the Mac but not from the Mac to the IPad, how can I set up the iCloud in both devises to do so?

I have a laptop Mac and an Ipad, and would like to transfer pictures, videos, etc from the ipad to the Mac but not from the Mac to the Ipad, how can I set up the iCloud in both devises to do so?

Welcome to the Apple Community.
Your best method would be to connect via USB and transfer that way, since videos are not transferred using photostream.
However you can stop photos on your mac being added to photostream in the iPhoto preferences > photostream by unchecking the automatic upload box.

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

Line items seen in fbln but not in process open items

Hi Gurus,
one line item is seen in fbl3n but not in process open items in f-07,
the entry is rent a/c Dr
to rent payable a/c
we can see is fb03, fbl3n of both accounts
Pl suggest. I am unable to clear

Dear Shymalasandia,
You can reach REGUP by se11 and insert the document number that You can see by FBL1N but not during the payment.
Probably it is contained into a payment proposal (F110) and therefore You cannot pay it manually (to avoid double payment).
If You find it into REGUP table, You have two options:
1.pay it by F110
2. delete the payment proposal by F110 (menu> edit> proposal--> delete) and pay it manually.
I hope this helps.
Mauri

Sales order is seen in MD04 but not on backorder report CO06.

Hello friends,
I went through several threads on backorder but couldn't find answers to my query. Kindly help. Thanks.
- Are there any alternative to doing backorder processing ?
- Can backorder processing be automated ? How ? What transaction ?
- An MTO sales order is seen on MD04 but not seen in backorder processing (I think CO06) so what could be the reasons ?
- I believe SAP recommends one report to be run regularly to delete old/open sales orders what is that and why it needs to be run ? Does it have any affect on backorder processing ?
- Chetan.

Hi Chetan,
Back orders are generally updated with the help of transaction V_V2.
Let's say that you were supposed to deliver one order on 25.06.2007 but the delivery has not been created yet.
Then V_V2 would determine the new schedule line date for this particular order along with the quantity which can be delivered on that particular date.
You can automate the process by just putting the transaction V_V2 for background scheduling.This background scheduling can be done with the help of transaction SM36.
Reward points if it helps.
Regards
Karan

How do I share my iTunes library with my mother, but not on our home network?

How do I share my Itunes library with my mother, but not on our home network?

Another alternative is she can select tracks from your library copy and just add them to her library. Then she does not have to bother with switching between two libraries.

Operation 0001 seen in cort but not in cor6

Operation 0001 seen in cort but not in cor6
I have a customised control key, for which i have chosen confirmation possible but not necessary.
Pls help.
Thanks
Neeraj Agrawal

Dear Neeraj,
Go to T.Code COR6,after mentioning the process order no,in the top menu ->Parameters->variable---> a pop up screen for
the plant and order type gets displayed,press enter-->now include the check box for confirmable under operation selection and
check the impact whether are you able to see the phase number.
Check and revert back.
Regards
Mangalraj.S

YouTube videos are all silent, on Firefox and Safari, but not Chrome

I'm baffled by this. It used to work fine and I'm not sure what changed but a month or so ago, suddenly all videos on YouTube are silent.
--The videos are silent on Safari and Firefox, but I can hear them on Chrome
--This only happens on my profile (the main profile)...my daughter's profile on this same MacBook doesn't have the problem
--Videos from Vimeo.com play just fine.
I've removed Flash and then updated my Flash player to the latest version, 11.6.602.180
I've tried deleting my YouTube.com cookie in Safari.
I can't figure out what would make videos silent in this specific set of circumstances but not others, so any help or suggestions you could provide would be appreciated.

BTW I've looked similar threads on here, and have some additional info:
--Video on cnn.com works fine.
--I am not on the HTML5 trial according to this http://www.youtube.com/html5
--I have not tried Vertical Forest yet as I'm unsure if it will help http://www.verticalforest.com/youtube5-extension/
--I haven't tried resetting Safari yet. I have this problem in Firefox too.

Video (mov) in iPhoto 8 library seen in iPhoto 8 but not iMovie 8.

Similar Messages

Maybe you are looking for