Video - new selection: garbled

I've recently put a lot of podcasts on my ipod. Every once in a while when I choose a new podcast to watch, before it selects the video to watch, the ipod will grab the first frame and 'swipe' it across the screen before it refreshes it correctly. To me, I can't tell if its the hard drive trying to catch up with the video or visa versa.
Anyone else have this issue? Is it normal?

Anyone? My iPod is the only one that has this issue?

Similar Messages

My Airplay is delivering Audio but no Video (black screen). The drop down box has a new selection "use airplay to; it does not let me select 'Mirror my IMac', it is stuck on 'extend desktop' any suggestions appreciated.

My Airplay is delivering Audio but no Video (black screen). The drop down box has a new selection "use airplay to; it does not let me select 'Mirror my IMac', it is stuck on 'extend desktop' any suggestions appreciated.

here is fix! i tried only step 1 and then restarted my computer and now it works. Choose remove All Files
Hope it helps.
https://discussions.apple.com/thread/5952624?tstart=0

Error message: "Attempt to capture video without a video device selected."

When trying to log and capture, I'm receiving the following error message: "Attempt to capture video without a video device selected. Please select a video device in your capture presents and try again."
In Capture Presents under DV NTSC 48 kHz it says "WARNING: Video Device DV Video is missing."
An attempt to edit the Capture Preset gives me QuickTime Video Setting Digitzer options of only "[missing] DV Video."
This happened only after I upgraded to Tiger. I know Log and Capture is recognizing the camera because it's showing the timecodes, but not the image. Any help would be most appreciated.

This reminds me of a problem with the QuickTime install. Try this - remove all the QuickTime associated .pkg files from /Library/Receipts, then go to http://www.quicktime.com and download the full installer and do a complete install.
Post back,
Patrick

Error message in report writer when add new selection filed?

Dear All,
I wanna add a new selection field cost element group and cost element to a report in report writer. I key in GR52 and click the general data selection. I select the set variable &1KSTAR to enter into the set ID. But it shows me the following message:
Set cannot be used in Selection:
Message no. GR807
Diagnosis
You are trying to use a set in report maintenance.
The set cannot be entered in the report definition for any of the dimensions for which the set could be used.
The following error message describes why the set cannot be used for all the dimensions for which the set can be used.
System Response
The set will not be entered in report maintenance.
Procedure
Choose an appropriate set.
What does it mean? I have tried other set variables but sitll gave the same message.
Thank you and good day.
Emma.

At the same time, it gave me a green light message saying:
Characteristic Cost Element is already used in a row
Message no. GR465
Diagnosis
The characteristic Cost Element is already being used in a report row block and therefore cannot be used in a different part of the report.
Technical note: The field name for characteristic Cost Element is KSTAR.
Does it mean I have used the cost element in the report and blocked the cost element so that I can't use it in the selection screen? How can I solve this by not changing the report or should I change the report?
Thank you and good day
Emma

Add a new selection option on VL71

I want to add a new selection option on VL71.
I know that I can do an implicit enhancement.
But I am not sure if I can add it in the place as showed.
If the enhancement cannot solve the problem, do I have to copy out a Z program.

Dear Experts,
In HUMO report, after the specail stock, We want add another selection field "Special Stock Number".
Do we need to go for a development for this?
Any alternate way available to get this done without much development involved? Pls suggest.
Regards,
Shetty

How to Add a new Selection Field in COPA Report

Hi Gurus
I'm new on SAP COPA reporting and I don't know how to solve this problem.
I need add a new Selection-screen field (char1), not connected with any characteristic.
This is necessary becuase if the user flag this field, when teh report is running I'll replace some key-figure values using the EXIT
ZXYEXF05. I don't find any instruction how to define this simple kinfd of variable, and use it into a Report.
Thank-you in advance for your help.
Claudio

Hi
I'll try to explain better my need.
I've 10 CO-PA Key-Figures used to Split in the Cost of a material in different Cost Items.
Using the customizing I fill these key-figures using some rules.
The new requirement is use SOMETIME the same KF, by displaying different Costs overwritting the original values using the exit ZXYEXF05. But I need to know when the user wants consider the original value of KF, and when he wants overwrite these values (when I have to run teh exit). So I thought to create a new Selection-screen field (Char1), to permit to the user to pass to some report this user request. I thought to define a global variable, and add it to several reports when this feature is required.
Can you suggest a better solution ???
I could create some empty KF and fill them using teh exit, but I would prefer not expand the CO-PA structure.
Thanks for help.
Claudio

"new selection", restricted key figure and basic key figure

Hi,
I have a test report and i have a basic keyfigure "ZRevenue" and "restricted key figure"(its defined over "ZRevenue") and
a "new selection"(its defined over "ZRevenue").
Now that i have "material number" and "material color" and "request id" in the rows. ("Material color" is a navigational attribute of material number).
In the column level i have a basic key figure "ZRevenue" and "restricted key figure"(its defined over "ZRevenue") and
a "new selection"(its defined over "ZRevenue") .
In a "restricted key figure" or "new selection", we can include a basic key figure or new formula or calculated key figure or an already restricted key figure into it, then we restrict it, with one or more characteristic values. In the report output we get KF values only for those characteristic values, with which it has been restricted. Please correct me if my understanding is wrong.
Initially i restricted the "new selection" (with material number 1 to 3) and "restricted key figure" (with material number 1 to 4).
In the cube i have material numbers 1 to 11. Now all the values were displayed from 1 to 11, but for the
"new selection" (with material number 1 to 3) and "restricted key figure" (with material number 1 to 4) i got values only for 1 to 3 and values for 1 to 4 respectively. This is as expected and is working fine.
Now i tried to restrict the basic keyfigure "ZRevenue" with material number 1, the output was only until the material number 4 (this is the greatest value of the material number defined over the "restricted key figure").
Then i tried to restrict the "new selection" (with material number 1 to 9) , then the output was from 1 to 9 material numbers.
If i remove the restriction over the basic keyfigure "ZRevenue" , then i get all the material numbers from 1 to 11, for "new selection" i get values for the material number 1 to 9 and for "restricted key figure" i get values for the material numbers 1 to 4.
Can some one explain me why this behavior?
Edited by: sapbi enthusiastic on Jan 31, 2012 11:48 AM

Hi,
This is where set theory comes in handy
So what you have is a basic KF (BKF), a selection (SEL), and an RKF.
When producing an output, BEx seems to be looking for the union of all the restrictions you place on these. So when your BKF is not restricted, the union comes out to everything in the underlying DSO. When you restrict the BKF for material number 1, this is how the restrictions might have been processed internally
BKF: Restriction on material 1
RKF: Restriction on material 1-4
SEL: Restriction on 1-3
Union of these three: 1-4
When you remove the BKF restriction and make SEL restricted to 9, this is how it plays out
BKF: NO Restriction on material
SEL: Restriction on material 1-9
RKF: Restriction on 1-4
Union of these three: everything.
As the union ends up giving you everything, you get 11 records. However, as SEL is restricted for 1-9, the SEL will have values for the materials 1-9. Likewise for RKF, you'll get values only for materials 1-4. Hope this clears things up!
Regards,
Suhas

How to create a new selection screen IN LOGICAL DATABASE PNPCE

how to create a new selection screen LDBS PNPCE

Hello Ankit,
Do you want to create a new selection screen in LDB PNPCE, or do you want to create a new selection screen in one of your reports using LDB PNPCE?
For later (which is more common), you can use HR Report Category.
Hope this helps.
Best Regards,
Biraju Rajyaguru

JTree calling setSelectionPath() does not highlight new selection

I have looked throughout many forum entries and this question has been asked a few times but I have not seen a solution that works at least for me.
When I do the following:
          TreePath path = new TreePath(...)
this.tree.setExpandsSelectedPaths(true);          // not sure if I need this
          this.tree.getSelectionModel().setSelectionPath( path ); // this alone should work correct?
          this.tree.scrollPathToVisible(path);
The original selection disappears (no highlighting) but the new one selected does not
I have also tried calling just for fun ...
     this.tree.getSelectionModel().resetRowSelection();
and this.tree.getSelectionModel().reload( path.getLastComponent() );
Does anybody have an idea of what may be going wrong ? The selection path is valid as I have verified it with the debugger.
Any ideas or suggestions are much appreciated
thanks
Doug

          TreePath path = new TreePath(...)
The devil is in the details... Unfortunately your case's details are in the ellipsis! :o)
Try to provide an SSCCE to get informed help, otherwise you can only hope that we guess well. That being said, here is my "guess":
A preliminary: JTree renders selection by comparing nodes pathes with the selection path(es).
As is common in the Java world, these comparisons rely on the equals() methods of the objets that make up the TreePath's components.
If any of the classes involved does not override equals, the corresponding components objects will be considered equals only if they are identical. In other words, a TreePath which contain a "new" instance of whatever class that does not override equals() will never be considered equal to any TreePath created formerly.
Now comes the gory part: DefaultMutableTreeNode (which is the most often common build block of TreeModels and TreePathes) does not override equals().
So if your TreePath are made of DefaultMutableTreeNode components, they will never be considered equal unless they use the same DefaultMutableTreeNode instances, which would somewhat not be a common nor practical way of building TreePathes.
The original selection disappears (no highlighting) but the new one selected does not Under my assumption:
- the original selection disappears (because by construction the original selection's TreePath it is not equals() to the TreePath passed in argument to setSelectionPath(...)).
- no new selection is rendered (because by construction no TreePath in the JTree's model can be equals() to the TreePath argument).
Does anybody have an idea of what may be going wrong ? The selection path is valid as I have verified it with the debugger.Under my assumption:
- you may have verified that the TreePath seemingly contained the expected values (often rendered in a debugger using toString() calls)
- you may have overlooked that the TreePath components were not the same references.
- you may not have executed step-by-step the TreePath.equals() methods nor the equals() method of the path's components.
Keep in mind that this is just an assumption, based on your code fragment (and on prior painful experience with JTree). If i'm off base and you still need help, please post an SSCCE as sugested previously.
Edited by: jduprez on Oct 11, 2009 12:53 PM

Add new select option for VT04 variants

Hi Experts,
Want to know the process of how we add a new select option (say sold-to/KUNAG) to the existing set of selection criteria in the variants in VT04 apart from implicit enhancements.
Even if we create a new implicit enhancement in LV56LSCR, the new field (sold-to/KUNAG) has to be further added to the select statements also. The select statement in the subroutine INDEX_SELEKTIEREN in LV56LF01 has to be enhanced for the same.
Also should this new field has to be added to the EXPORT TO and IMPORT FROM MEMORY ID MEMORY_LFSL statements in the other includes of SAPLV56L ?
Is there a better/recommended way to do this? Any pointers are much appreciated. Thank You.
Regards,
Narendra.

Hi Ravi,
This is infact the program for the txn VT04, would you be able to shed any other info? Thanks.
Regards,
Narendra.
Edited by: Narendra Daka on Dec 7, 2011 9:00 AM

Error on the "News" selection on a google search.

When I hit the "News" selection on a google search, the news page briefly appears, but then switches to a blank page with a bit of javascript: "(function(){})();(function(){})();". This does not happen on Safari or Chrome.

After about 24 hours, this behavior simply stopped. I'll hang onto this in case the issue repeats. Thanks.

VT04 - Adding new select options in grouping screen for capacity criteria

Hi,
I am trying to add a new select option(min & max) for grouping the delivery based on the quanity/no of units just like the weight/volume. Is there an exit/enhancement available in the program. The program for VT04 is RV56TRGN and the actual program for grouping criteria is RV56TRSP.
I have looked into the user exit EXIT_SAPLV56M_001. This I guess is only for adding the grouping criteria and not for adding select options like weight/volume.... I would need to add something similar to this.
THnks
Chinna

You should search for Screen Exit .
Also you can check if any enhancement point is avaliable in screen display place.
You need to debud and find the exact place where this change will be required and then it will be easy to find the option for making desired changes.
Hope this helps you.

How to create a new selection screen LDBS PNPCE

how to create a new selection screen LDBS PNPCE

Hello Ankit,
Do you want to create a new selection screen in LDB PNPCE, or do you want to create a new selection screen in one of your reports using LDB PNPCE?
For later (which is more common), you can use HR Report Category.
Hope this helps.
Best Regards,
Biraju Rajyaguru

VL10A and new select-options

Hi,
I copied transaction VL10A to a new one ZVL10A.
This was due to the need to add a new selection-criteria in the main screen: Delivery Type field.
When I try to create the delivery for that delivery type I selected in ZVL10A main screen I am not able because I have lost the variable.
See this example please:
In my main program: ZRVV50R10C:
FORM userexit_select_options_transf                          "n_524424
     CHANGING cx_select_options TYPE shp_vl10_select_options
               cx_list_profil     TYPE shp_vl10_list_profil.
cx_select_options-lfart = ST_DEVTY[].
S_DEVTY-lfart = ST_DEVTY[].
ENDFORM.                               "
In Include LZV50R_VIEWF34 (where we call transaction VL01N to create delivery) I want to pass this parameter ST_DEVTY, but I am not able. I dont have any variable at this moment with the
Delivery type from my main screen.
Thanks
Best regards

Hi,
This you have to do with Parametr Id for delivery type only.Otherwise you cant get that value.
Parameter id for LFART is :ALT.
so using export and import you try.
Regds
Sivaparvathi
Please reward points if helpful..

Currency in New selections

Hi all,
I have a query designer in which rows and columns exist. In columns I have written some formulaes and have some selections.
When I execute a report in designer I can see the values coming in formulas and in New selections with currencies.
I dont want to display currencies and I know how to do it for written formulas but not for selections.
How to remove the currencies for taken selections in columns of an Query designer?
Thx

Hi Nagar,
I don't have concrete solution for your issue - but as a workaround you could use formulars that refer to the selections.
In these forumular you can remove the currencys as usual.

Video - new selection: garbled

Similar Messages

Maybe you are looking for