Video not working properly in Quicktime

Ever since I updated to the most recent Quicktime, video files have not been playing properly in full screen mode. They work fine in the small window, but the video is jumpy in full screen, so it's more like watching a slide show than a video. I never had this problem before the update. I have already switched to Safe Mode, but that hasn't helped. Can someone help me?

@ Lenny
That's a symptom of sites doing "browser sniffing" of the User-Agent string.  IE11 is a modern browser and no longer looks like a new version of older versions of IE.  However, it can be made to emulate other browsers in various ways.  The simplest way is to use Compatibility View but then the site must accept requests from IE7 in Quirks mode.  Other ways involve using the Developer Tools, Emulation tab (F12, Ctrl-8) but that is just a temporary override which must be reapplied each time it is needed.  The best solution is for the site to start using modern practices.  Otherwise switch to another browser.
FYI
Robert Aldwinckle

Similar Messages

  • YouTube videos not working properly in Windows 8

    Hello - I have bought my first windows 8 computer today.
    One of the first things I did was install Mozilla Firefox and then Adobe Flash.
    To my horror, when I tried to load a YouTube video, one second of the video clip played, then the standard YouTube error message appears.
    I have checked that I have properly installed flash player, that my firewall settings are correct, and that i have the latest video drivers.
    Flash seems to work on everything besides YouTube and the Microsoft help forum (the submit button wouldn't work...) this is the same in Firefox and whichever version of IE I have installed on here
    Any help is greatly received!
    Thanks
    Sam

    Hello - at the time of writing the original post, I thought I had tried everything...
    It turns out, however that Mozilla Firefox does not give you the option to enable or disable activex. As I hate Internet Explorer with a passion, I completely forgot to try disabling activex in that browser until I was absolutely forced to, when I re-read the instructions on the page that you have linked me to... (however I did this before you posted it.)
    To cut a long story short, I ended up (after a solid four hours of trying different things) deleting my favourite browser (Firefox) and have now installed Google Chrome, which allows me to watch all the YouTube videos I desire... I'd just turned my computer on to remove this post when I saw that you had replied.
    I shall send the Mozilla Devs an email and let them know about this issue - hopefully it will get somewhere in future updates!
    Many thanks!
    Sam

  • Streaming Video Not Working Properly

    Starting yesterday, I noticed that anytime I attempt to view a video from YouTube or any other video streaming site, the videos only load to a certain point and stop. It doesn't seem to matter what website I'm at. The load bar loads to about an inch and then that's it. Help! Thanks!

    Was this problem solved? I am experiencing the same issue, on my iMac G4 and it may have started with the QT update as well. Video used to work fine, now it is choppy and eventually hangs up while the audio continues normally. This happens during playback in iTunes, Quicktime, and Foto-Magico (slideshow program)
    iMac G4 800mh   Mac OS X (10.4.9)  

  • Video not working properly

    I tried installing all sorts of codecs, only to find that totem, and every other video/audio viewer was unable to play my file (it's avi). With totem I get a message saying Divx mp4 decoders are not install. In ffplay, mplayer, and vlc I get "illegal instruction".
    Last edited by SapiensAntiquus (2009-05-11 21:04:42)

    The repository of archlinux.fr contains an additional codec pack (codecs-all). Perhaps this could do the trick.
    http://repo.archlinux.fr/i686/codecs-al … pkg.tar.gz
    http://repo.archlinux.fr/x86_64/codecs- … pkg.tar.gz
    Adding the repository is described here:
    http://www.playonlinux.com/en/download.html

  • Ipad1 with 64 gb, video not working properly. Is it fixable?

    My very first iPad, I rec'd 5 yrs ago. It's a first generation and has 64 GB. I use it mostly to watch the videos - T V Shows & Movies I have downloaded on it. Today I watched a couple of short videos, then was going to watch a movie. It simply would not load. I tried with the "Video" icon and then by going to iTunes and choosing the movie I wanted. Sometimes it would not go to iTunes, it would revert back to the wallpaper. I never could get it to let me get to tech support to see if it was fixable. I am on another iPad at this time. I just love that little iPad and I love all of my movies and T V shows. This iPad I am using at present is only 16 GB so it will not support very many downloads. Help!!!

    DDid you try quitting all the apps and then reset your iPad? Double click the Home button to show the screen with running and recently used apps. Tsp and hold on an app icon until they all start to jiggle and display a minus sign. Tap on the minus sign to close out or quit the app. Then reset your ipad. Press and hold the Home and Sleep buttons simultaneously, ignoring the Red Slide to Power Off. Keep holding until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • TS3003 Installed QuickTime7 from Snow Leopard installation disc and still can't view videos on iPhoto. A box appeared saying "you have installed Mac OS X software older than your current version of Mac OS X and may not work properly."  Now what?

    Installed QuickTime7 from Snow Leopard 10.6.8 installation disc and still can't view videos on iPhoto. A box appeared saying "you have installed Mac OS X software older than your current version of Mac OS X and may not work properly."  Now what?

    Download and install the latest QuickTime Player for Snow Leopard > http://support.apple.com/kb/DL923

  • "Itunes has detected a problem with your audio configuration. Audio/Video may not work properly".

    Turned my Dell running windows 7 off 2 days ago. Turned on today.  Launched ITunes and got message "Itunes has detected a problem with your audio configuration. Audio/Video may not work properly".
    All my albums are there but won't play.
    Deleted Itunes and reinstalled. Same as before.
    Any ideas ??

    Hey MrCurwen,
    I was able to find an article that included the same error message you're experiencing:
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371
    According to that article, if you see the error message "iTunes cannot run because it has detected a problem with your audio configuration," QuickTime may need to be reinstalled. Please follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
    On the Start menu, click Control Panel.
    Follow the steps appropriate for your Windows operating system below.
    Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
    Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
    Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
    During the download:
    If you choose to run the installer, proceed to the next step.
    If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
    Follow the on-screen instructions to install QuickTime.
    Reopen iTunes.
    Cheers,
    David

  • Adobe is not working properly not able to view videos or games

    adobe flash player not working properly and not able to view videos or games

    Welcome to the Adobe Forums.
    The more information you supply about your situation, the better equipped other community members will be to answer. Please supply the following Information that you haven’t already (where applicable):
        •    Adobe product and version number
        •    Operating system and version number
        •    Browser and version number (where applicable)
        •    The full text of any error message(s)
        •    What you were doing when the problem occurred
        •    Screenshots of the problem (if possible)
        •    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • After upgrading ios6 yahoo messenger not working properly and specially in video call colors appearance is very poor

    After upgrading ios6 on my iPad2 am not able to login at any yahoo account and gmail account and even yahoo messenger not working properly whenever I want to do vc it's takes too long to connect and even in video call the color appearance in cam is so poor and pic is blurry, please tell me what to do?

    Please reply me to solve my problem

  • How come my dvd studio pro 3 is not working properly with leopard? Need help!, How come my dvd studio pro 3 is not working properly with leopard? Need help!

    I recently installed os leopard on my power MAC G5 and my DVD studio pro 3 application is not working properly as it used to be. I was unable to create motion menu and build the dvd properly. Then I deleted and reinstall dvd studio pro 3, but it did not solve the problems. What should I do?

    I have a sneaking suspicion it won't work in 10.5.x, possibly because of the version of Quicktime...
    System Requirements:
    Mac OS X v10.3.2
    733 MHz or faster PowerPC processor (G4 minimum) and AGP graphics card
    256 MB of RAM (512 MB recommended)
    20 GB available disk space
    8 MB of video memory (32 MB recommended)
    QuickTime 6.5
    DVD drive required for installation
    I think your going to need a dual boot Mac with 10.4.x on another drive or partition.

  • The head phone jack on my brand new iPod touch 5th generation is not working properly

    The head phone jack on my brand new iPod touch 5th generation is not working properly. It has sound without the headphones in but when I plug them in it has no sound, it's low, or poppy. I had only used my apple supplied headphones once before and it worked fine. I know it's not the headphones because I tried them on my girlfriends phone and they worked fine.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar

  • Flash player does not work properly on Windows 7 32 bits

    Hello,
    My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
    My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
    I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
    In fact, it works correctly on some sites, like youtube, but not on some others like :
    http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
    http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
    http://www.myspace.com/ => no audio player, right click gives flash context menu
    some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
    I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
    No problem too with flash player on http://www.adobe.com/software/flash/about/
    But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
    I cannot check boxes,
    My changes are not saved.
    In most of flash animations, videos, ...,
    when I click on parameters, I cannot do anything, even closing.
    when I am in full screen mode, the message "press escape to exit...." does not disappear.
    Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
    Thank you for your help

    Hi eidnolb
    Thanks for your answer.
    This is what I have :
    Verify user permissions
    I have an administrator account.
    I tried (uninstall, install and run) with super-administrator account for same results
    Install the most current version.
    I am running the latest version (10.0.45.2)
    Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
    I did not "clean" my computer.
    Troubleshoot Pop-up blockers
    I have no Pop-up or esle blocker  software.
    Ensure that Internet utilities do not block Flash Player
    I tried (uninstall, install and run) without Avast.
    I have windows 7 firewall. I do not know where I can allow ActiveX  controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
    Fix machine crashes when displaying Flash content
    I have no freez or crash.
    Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
    Using FF, I have SWF vs  10.0.45.2 and it is Enabled
    I really do not understand !!
    Thanks,
    Ju'

  • Windows 7 Brightness and Function key not Working Properly

    i have HP 15-af024AU APU Quad Core A8-7410 - (4 GB DDR3,1 TB HDD) Noteboook and it  came with windows 8.1 preinstalled than i installed windows 7 ultimate.
    i have problem in Display Brightness i am not able to change Brightness by function key or by manually from windows settings.
    2. my Function key are not working properly . all key are fliped whiout holding function key it work as function key. 3. bluetooth is not working when i search for new device not able to find any available discouable bluetooth device. 4. wireless button software is not wokring in windows 7 i already updated my bios that available in drivers support and install alll drivers too properly so please give proper drivers for windows 7 for this product that works perfect.

    Sorry that driver didn't work. You can try this graphics driver and if that doesn't work, unfortunately, I won't be able to help you with that issue. This package provides the AMD High-Definition (HD) Graphics Driver and Catalyst Control Center for supported notebook models that are running a supported operating system. For notebooks with switchable graphics modes, this package includes drivers for both graphics processing units (GPUs). Switchable graphics enable users to switch between a power-saving graphics mode (normally used under battery power) and a high-performance graphics mode. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp71253.exe As far as the Fn keys being 'flipped,' I have no idea what you mean by that, or what to do about it. Did you install the software that controls the funtion keys? This package contains the HP System Event Utility, which enables special function keys on supported notebook models to be programmed. For example, HP System Event Utility enables users to press the Fn+ESC keys to view system information. This software works with the supported operating systems. File name: sp71156.exe

  • Skype is not working properly on my ipad air it is getting disconnected in every 45 sec

    Skype is not working properly on my ipad air it is getting disconnected in every 45 sec
    Iup graded the OS from 7 to 7.1 still the problem remain same Please help me to trouble shoot

    Trouble shoot your wifi connection.  If wifi is slow to buffer videos it will also have a problem with video chats.

  • I have lost track of the number of websites that do not work properly on the iPad without Adobe Flash player which is unsupported. I cannot use retail sites, billing sites and most important of all job application sites. All are missing tabs, links, info

    I have lost track of the number of websites which do not work properly on my iPad. They include retail sites, billing sites and most important of all job application sites. They all seem to require Adobe Flash Player which cannot be downloaded onto an iPad. Skyfire does not solve the problem. They all load without vital parts of the site such as tabs, links and correct formatting. Any suggestions?

    Most such brower/service combinations have a difficult time working with Flash-based apps and often fail completely. Flash videos are usually the most successful content these browers can handle. You can try the others apps - Puffin, iSwifter, etc - but you may find that none of them work, in which case you will not be able to use your iPad with these sites other than by using one of the various remote control solutions to take over a computer running the full Flash Player.
    IMHO, any developer that built a Flash application for a billing or job application site was an idiot, but I know that's out of the control of anyone but the relevant company.
    Regards.

Maybe you are looking for

  • Skype on Windows 8.1 running very slow

    Good day I have a problem here Since I have installed my Windows 8.1, integrated Skype works so slowly My video calls are worse than ever I usually get videos, both sending and receving at a medium fps of 10 My system requirements are more than enoug

  • How to make MDI child - parent relationship in java using net beans/

    Hello Expers i am going to prepare an application in java. for that, i have to establish an MDI child - parent relation between various forms. I am preparing that application in net beans. Just guide me as early as possible for that as i have to subm

  • Wait function waiting double the normal time

    When using either the "Wait (ms)" or "Wait Until Next ms Multiple" functions on most machines with the interval set to 1 ms, the function actually waits 2 ms. However, when using our simulator system (which was set up by my predessessor), both functi

  • How do I get icloud to show up when I click on "mail"?

    I believe I have transferred my old mac.com email to icloud.  How do I now bring up the icloud instead of the old format?  How do I get rid of the old format?  Sorry, I am not savvy on computer matter and cannot find a place to take these actions.  T

  • Launch pdf from Standalone

    I'm distributing my Captivate project via CD, so chose to publish as a Standalone project. I have pdfs that are included in the same folder as my exe. When I click the links to these pdfs, it launches Internet Explorer and I get a "Page Not Found" er