Video only enabled when call is initiated from one direction across SIP Trunk

wonder If anyone can shed some light on this.
I have an issue between two cucm clusters, tied together with a SIP trunk.
If we dial from Australia to the US there is two way video and audio. If the US calls Australia, there is only audio. I have run a test call from the US through VLT and have found the following SDP's (see below). When The US make a video enabled call to australia the message "Video is not available, Remote party has video off" on the US phone screen.
Both clusters have the SIP trunk set up with the same codec settings and video bandwidth between reqions and locations. the SIP trunk is configured pretty much stock standard and identical at both ends, yet the SDP seem to want to negotiate different Video Parameters (again see SDP's below). CUCM in australia is 10.61.2.82.
what other settings can I check to get video to work when calls get initiated from either direction,...................
both phones are SIP 8941's, again audio is no problem in both directions.
=======this is from the phone in Australia to the CUCM in australia phone IP 10.61.4.112======================================
45870304.002 |09:02:07.941 |AppInfo |SIPTcp - wait_SdlReadRsp: Incoming SIP TCP message from 10.61.4.112 on port 34271 index 53563 with 2089 bytes:
[344530309,NET]
SIP/2.0 200 OK
Via: SIP/2.0/TCP 10.61.2.82:5060;branch=z9hG4bKe0103892bbb75
From: "Anonymous" <sip:[email protected]>;tag=109791678~1b5af941-cea2-4a00-a0bd-15a532224d7d-59374526
To: <sip:[email protected]>;tag=5057a887bfdd550c0d321a20-7f843426
Call-ID: [email protected]
Date: Wed, 29 Apr 2015 23:02:07 GMT
CSeq: 101 INVITE
Server: Cisco-CP8941/9.4.2
Contact: <sip:[email protected]:34271;transport=tcp>;video
Allow: ACK,BYE,CANCEL,INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE,INFO
Remote-Party-ID: "Dennis Mink - 33935" <sip:[email protected]>;party=called;id-type=subscriber;privacy=off;screen=yes
Supported: replaces,join,sdp-anat,norefersub,resource-priority,extended-refer,X-cisco-callinfo,X-cisco-serviceuri,X-cisco-escapecodes,X-cisco-service-control,X-cisco-srtp-fallback,X-cisco-monrec,X-cisco-config,X-cisco-sis-7.0.0,X-cisco-xsi-8.5.1
Allow-Events: kpml,dialog
Recv-Info: conference
Recv-Info: x-cisco-conference
Content-Length: 966
Content-Type: application/sdp
Content-Disposition: session;handling=optional
v=0
o=Cisco-SIPUA 28123 0 IN IP4 10.61.4.112
s=SIP Call
t=0 0
m=audio 16736 RTP/AVP 0 8 18 102 9 116 101
c=IN IP4 10.61.4.112
a=trafficclass:conversational.audio.avconf.aq:admitted
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:102 L16/16000
a=rtpmap:9 G722/8000
a=rtpmap:116 iLBC/8000
a=fmtp:116 mode=20
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=sendrecv
m=video 16738 RTP/AVP 126 97
c=IN IP4 10.61.4.112
b=TIAS:2000000
a=trafficclass:conversational.video.avconf.aq:admitted <----this is missing from US SDP
a=rtpmap:126 H264/90000
a=fmtp:126 profile-level-id=428014;packetization-mode=1;level-asymmetry-allowed=1;max-mbps=36000;max-fs=1200;max-rcmd-nalu-size=1300
a=imageattr:126 send * recv [x=640,y=480]
a=rtpmap:97 H264/90000
a=fmtp:97 profile-level-id=428014;packetization-mode=0;level-asymmetry-allowed=1;max-mbps=36000;max-fs=1200
a=imageattr:97 send * recv [x=640,y=480]
a=rtcp-fb:* ccm tmmbr
a=sendrecv
============below is coming from the US (phone IP is 10.1.109.81)================
04/30/2015 09:02:08.169 Send 10.61.4.112 SIP ACK bfa99a00-541162ed-71da57-52023d0a NotAvail
SIPTcp - wait_SdlSPISignal: Outgoing SIP TCP message to 10.61.4.112 on port 34271 index 53563
[344530326,NET]
ACK sip:[email protected]:34271;transport=tcp SIP/2.0
Via: SIP/2.0/TCP 10.61.2.82:5060;branch=z9hG4bKe010481f320b08
From: "Anonymous" <sip:[email protected]>;tag=109791678~1b5af941-cea2-4a00-a0bd-15a532224d7d-59374526
To: <sip:[email protected]>;tag=5057a887bfdd550c0d321a20-7f843426
Date: Wed, 29 Apr 2015 23:02:05 GMT
Call-ID: [email protected]
User-Agent: Cisco-CUCM10.0
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: presence
Content-Type: application/sdp
Content-Length: 456
SDP Message
====================================================
v=0
o=CiscoSystemsCCM-SIP 109791678 1 IN IP4 10.61.2.82
s=SIP Call
c=IN IP4 10.1.109.81
b=TIAS:8000
b=AS:8
t=0 0
m=audio 16412 RTP/AVP 18 101
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=trafficclass:conversational.audio.aq:admitted <---what does this do here, and how?
m=video 0 RTP/SAVP 31 34 96 97 <-----------port 0. why?
a=rtpmap:31 H261/90000
a=rtpmap:34 H263/90000
a=rtpmap:96 H263-1998/90000
a=rtpmap:97 H264/90000
a=content:main
a=inactive

Hi Dennis,
On US phone SDP media attribute is inactive.
a=rtpmap:97 H264/90000
a=content:main
a=inactive
Are you sure that audio works ? Can you please share all the SIP messages of both the scenarios.
Thanks
Manish

Similar Messages

[svn:fx-trunk] 13201: Fix RTE when calling PopUpManager.createPopUp() from a module or sub-application.

Revision: 13201
Revision: 13201
Author:   [email protected]
Date:     2009-12-23 12:16:41 -0800 (Wed, 23 Dec 2009)
Log Message:
Fix RTE when calling PopUpManager.createPopUp() from a module or sub-application.
This fix adds a moduleFactory parameter to PopUpManager.createPopUp() to allow a module or sub-application to specify the style manager to be used. Modules and sub-applications should always pass a moduleFactory to PopUpManager.createPopUp() or PopUpManager.addPopUp() to ensure the correct style manager is used when looking up styles. Otherwise the parent of the pop up is used to determine the style manager.
QE notes: Please create a PerModuleStyles test that uses the new parameter to createPopUp().
Doc notes: None.
Bugs: SDK-24835.
Reviewer: Alex
Tests run: checkintests, Managers/PopUpManager
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24835
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/IPopUpManager.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/PopUpManager.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/PopUpManagerImpl.as

Can only connect from one direction

I'm having trouble video confrencing... I tried searching the forums, but I'm having trouble thinking of clever search terms.
I can only connect from one direction with one person. They can invite me to a chat and it works fine every time. However when I invite them it always fails. I can invite other people and it works fine though.
This doesn't seem like a typical router problem, because they can invite me and we videochat just fine.
This has been a problem for most versions of iChat that I can remember, but I'm using 3.1.5 currently.

Hi
Is the other person a PC user.
Tony

How do I specify the gmail outgoing server if I have multiple gmail accounts in my mail? I have 2 business accounts and when I send mail from one account, it is sent from the other account and the sending email is not from the correct account.

I love my apple email and do not want to use google mail on safari. However, I have 2 gmail accounts set up on apple mail, but when I send mail from one of my gmail accounts (I choose the specific gmail account in the drop down window), it actually goes out as if it is from the other gmail account. I can't have that happen because one is my job, the other is a personal business account and unfortunately, the mail from both gmail accounts want to send through the personal business account. How do I make it send from a specific gmail account? I even tried deleting the accounts and setting them up again hoping I set it up wrong in the first place, but to no avail, it is still doing the same thing except this time I set the job account up first and then the personal business account and now everything goes from the job account! The only good thing is that the incoming messages work properly and they go into the correct inbox. Somebody please fix my outbox!

In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account. The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
Ernie

HI JUST COPYED CALL OF DUTY FROM ONE OF MY MACS TO OTHER IT WILL NOT WORK ON THE OTHER ONE?

HI JUST COPYED CALL OF DUTY FROM ONE OF MY MACS TO OTHER IT WILL NOT WORK ON THE OTHER ONE?

Are you saying that you bought the game from the App store and made another copy onto a dvd so you can play it on another computer too? If so, you can not do that, you have to buy it again for the other computer.

When I move pages from one document to another, it creates a new alternate layout.

Hello,
I'm having an issue with combining some documents. Usually I use the "move pages" command and tell the pages to integrate with another document. However, because of the new alternate layout feature, both documents have the default layouts as "Letter V". So when I move pages from one document to the end of another, it creates a new alternate layout labeled "Letter V2" and "Letter V3" etc. Is there a way to make the pages just go into the main layout of Letter V without creating a new alternate layout? How do I merge alternate layouts created in the integrated document? All documents are the same page size and orientation.
Thank you kindly,
Sheena

Petrill,
Thank you. I was trying to do that yesterday, but it was grayed out. It seemed to work alright today.
Thanks,
Sheena

When dragging a thumbnail from one place to another, the origional thumbmail ends up in other locations. Sometimes the same thumbnail covers up other thimbmails.

When dragging a thumbnail from one place to another, the origional thumbmail ends up in other locations. Sometimes the same thumbnail covers up other thimbmails.

Hi christophers37215878
Please elaborate your issue.
What exactly are you trying to achieve?
Which Adobe Product or service are you referring to?
Can you please provide the screenshot?
Regards,
Rahul

Export 4 videos (each video: 1024 px wide X 768 tall) from one master AE video which is 4096 pixels

What is the best way to export 4 videos (each video: 1024 px wide X 768 tall) from one master AE video which is 4096 pixels wide X 768 tall? I will be using animation codec. This is for a 7 minute master video. Thanks, Meg
AE CS5 Mac OS 10.6.8, 2 X 2.8 GHz Quad core intel xeon, 8 GB 800MHz DDR2 FB-DIMM

Thanks so much Dave. I really appreciate your help and time. Thanks a million.
Cheers, Meg

When moving my iphone from one computer to another, the apps do not follow and if I purchase an app on the new computer, it seems that all previous apps on the iphone will be lost How do I import the previous apps to the new computer?

When moving my iphone from one itunes computer to another, the apps installed on the original computer do not show on the new one. How do I get those apps to be recognized on the new computer without deleting them all from my iphone as it asks.

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

Indesign repeatedly crashes when I copy text from one InDesign document to another InDesign document

Indesign CC repeatedly crashes when I copy text from one InDesign document to another InDesign document. Is it possible to solve this problem?

Without system information and details like what text formatting, language settings, fonts used, paragraph styles even down to the spell check language nobody can even begin to guess.
Mylenium

FILE.IO.PERMISSION and SOCKET.PERMISSION when calling jdev proxy from DB

Hello everybody,
i deployed a webservide proxy (made in jdev 10.1.3.2) to an oracle 10gR2 database. Invoking this proxy works very well when calling it (as a procedure in the database) on the same machine as the DB is running.
But when trying to invoke the procedure remote on the DB-server from another pc i get 2 error messages (randomly):
java.security.AccessControlException: the Permission (java.net.SocketPermission 192.168.20.1:1521 connect,resolve) has not been granted to VECOZO. The PL/SQL to grant this is dbms_java.grant_permission( 'VECOZO', 'SYS:java.net.SocketPermission', '192.168.20.1:1521', 'connect,resolve' )
java.security.AccessControlException: the Permission (java.io.FilePermission \\WEBFS01\WEBFS01_Vecozo\Temp\Acc\MAY07 read) has not been granted to VECOZO. The PL/SQL to grant this is dbms_java.grant_permission( 'VECOZO', 'SYS:java.io.FilePermission', '\\WEBFS01\WEBFS01_Vecozo\Temp\Acc\MAY07', 'read' )
I gave this permissions in the sys schema to the vecozo schema following the example the error produces for me, but it doesnt work! When i grant socketpermissions on the port secified by the error and i run the proxy again the db comes up with the same error, only with a different port number. I'm getting crazy here. Also the granting of the file.io permission seems to have no result.
What is strange is that it all works when invoking the proxy locally (from the pc as where the db is running). I think this is because locally you dont need socketpermissions (as sockets are primarily for communication with other pc's). Furthermore i did not even grant the file permission when working locally in my testenvironmentand it all worked just fine. so i dont know why i suddenly need this permission when invoking the procedure on the productionserver from an external pc.
Can somebody plz help me with this????
greetz,
Kim

Anybody :)

Java.lang.ClassCastException when calling webservice stub from oracle DB

Hello everyone,
Because i need to get familliar with calling java webservices from an oracle database, i followed the following example
(http://www.oracle.com/technology/products/jdev/howtos/10g/WS_DBCallout/DBCalloutWS_HowTo.htm),
which included installing the SOAP client stack to the database (in the sys schema), grant the right permissions to the SYS user, developing a simple Helloworld webservice with jdeveloper 10.1.2, generating a Webservice stub and deploying a static method of this stub to the database.
All of this worked just fine, but when i want to call the webservice from oracle by invoking the deployed function, i get a java.lang.ClassCastException.
The complete stacktrace lists as follows:
v_Return = foutje: java.lang.ClassCastExceptionnulljava.lang.ClassCastException
     at org.apache.soap.rpc.RPCMessage.serializeParams(RPCMessage.java:323)
     at org.apache.soap.rpc.RPCMessage.marshall(RPCMessage.java:305)
     at org.apache.soap.Body.marshall(Body.java:148)
     at org.apache.soap.Envelope.marshall(Envelope.java:203)
     at org.apache.soap.Envelope.marshall(Envelope.java:161)
     at oracle.soap.transport.http.OracleSOAPHTTPConnection.send(OracleSOAPHTTPConnection.java:664)
     at org.apache.soap.rpc.Call.invoke(Call.java:261)
     at test.HelloWorldServiceStub.sayHello(HelloWorldServiceStub.java:82)
I debugged the WebServiceStub and noticed that the call.invoke method crashes. This is weird beacuse when i use System.out.println on the parameter is works just fine. so you would think it is a string.
Moreover, if i invoke the webservice from the endpoint or even when im debugging the stub locally it all works just fine.
Can someone plzzzzzz help me with this because i spend the whole day looking for an answer and im getting crazy!!!!!
Thanx al lot guys,
Kim
PS or could the problem be in the database instead of the webservice?????????
Message was edited by:
user568880
Message was edited by:
Kim Zeevaarders

I think that it's going wrong because i did not install the right SOAP client stack.
In the HowTo is specified what JAR files are to be loaded in the database (from %JDEV_HOME), but it states that it has only been tested on a Oracle 9.2 database. I'm using Oracle10g. Maybe that's the reason that im getting this classcast exception...
Can anybody tell me what the right .JAR files are that have to be loaded into database when working with Oracle 10g?
Many thx in advance!
Kim

Problem when calling session bean from main.

Hi everyone
I get the following error when calling a session bean from main(String args[]).
Sep 3, 2008 9:11:13 AM com.sun.enterprise.appclient.MainWithModuleSupport <init>
WARNING: ACC003: Application threw an exception.
java.lang.NullPointerException
at databasetest.Main.main(Main.java:26)
Here is my code beneath.
I'm using netbeans and glassfish application server.
Everything is in the same project, called DatabaseTest, I also have deployed the application before running the client.
I'm running the client as follows, right click on the DatabaseTest-app-client and select run.
The client:
package databasetest;
import com.test.UsersFacadeRemote;
import javax.ejb.EJB;
import com.test.Users;
public class Main {
    @EJB
    private static UsersFacadeRemote usersFacade;
    public static void main(String[] args) {
        Users users = new Users(12, 34);
        usersFacade.create(users);
}The remote facade I'm calling:
package com.test;
import java.util.List;
import javax.ejb.Remote;
@Remote
public interface UsersFacadeRemote {
    void create(Users users);
    void edit(Users users);
    void remove(Users users);
    Users find(Object id);
    List<Users> findAll();
}The stateless bean:
package com.test;
import java.util.List;
import javax.ejb.Stateless;
import javax.persistence.EntityManager;
import javax.persistence.PersistenceContext;
@Stateless
public class UsersFacade implements UsersFacadeRemote {
    @PersistenceContext
    private EntityManager em;
    public void create(Users users) {
        em.persist(users);
    public void edit(Users users) {
        em.merge(users);
    public void remove(Users users) {
        em.remove(em.merge(users));
    public Users find(Object id) {
        return em.find(com.test.Users.class, id);
    public List<Users> findAll() {
        return em.createQuery("select object(o) from Users as o").getResultList();
}

looks like you're banging your head against the same brick wall as [I have done|http://forums.sun.com/thread.jspa?forumID=13&threadID=5317110] and [others have in the past|http://forums.sun.com/thread.jspa?forumID=136&threadID=5259913] if that's any consolation.
Funny thing is, mine did actually work in the debugger but not when running!
Strange thing that.
I did initially interest someone from the developers but they couldn't really help, ended up saying : try instantiating your beans the EJB 2.1 way and see where that gets you. Yes that works but they promised us "hey no more dopey xml deployment descriptors just some cool annotations" didn't they?
I've got the feeling were' missing something really obvious!
Edited by: sebthebike on 03-Sep-2008 12:21

Vision Builder 2010 Active time not working when calling Vision inspection from testand 2010

I have an issue where I am timing a flashing light using the active time variable, when I run the inspection from the inspection view everything works, however when I run it from the configuration view or by calling it through teststand 2010 with the Vision Vi's the Active Time never changes from 0.00000.
I do not need precides timings so I am NOT worried about the +/- 20ms from the windows system clock.

Hi Ryan,
Can you read any of the other variables using the Get Inspection statistics VI? Is it only the Active Timer that doesn't change?
Cole R.
National Instruments
Applications Engineer

Error when calling a procedure from my apex application

Hello.
I want to create a small APEX application that can configure asynchronous change data capture (distributed hotlog) on certain tables.
Basically, what the application should do is to simply create change tables. Everything else is set up as prerequisite.
My problem is that when I run the following script from schema apex_cdd (using sqldeveloper) , it works; but if I run it from my apex application by calling it when pressing a button as a pl/sql process, it doen't work.
BEGIN
apex_cdc.enable_table_capture
     (     i_owner => 'staging_cdcpub',
          i_change_table_name     => 'g_changeTable',
          i_change_set_name     => 'Source_changeSet',
          i_change_source          => 'orcl01_cs',
          i_source_schema          => 'My_src',
          i_source_table          => 'G',
          i_column_type_list     => 'STARTDATE DATE,STATUS CHAR(1),NAME VARCHAR2(10),ENDDATE DATE,DESCRIPTION VARCHAR2(255),ID NUMBER(8,0),VALUE NUMBER(10,2)'
END;
If I look in the trace file, i see that the error is:
CDCdebug:in ChangeTable.java enableDisabledTriggers: ORA-06550: line 1, column 8:
PLS-00201: identifier 'SYS.DBMS_CDC_SYS_IPUBLISH' must be declared
ORA-06550: line 1, column 8:
PL/SQL: Statement ignored
oracle.jdbc.driver.OracleSQLException: ORA-06550: line 1, column 8:
PLS-00201: identifier 'SYS.DBMS_CDC_SYS_IPUBLISH' must be declared
ORA-06550: line 1, column 8:
PL/SQL: Statement ignored
Other remarks:
- My procedure calls: sys.DBMS_CDC_PUBLISH.CREATE_CHANGE_TABLE.
- I gave the same rights that I gave for apex_cdc schema to flows_030200 and APEX_PUBLIC_USER schemas (just to see if it works), but it doens't.
Is APEX calling the procedure from another schema ?
Does anyone has an idea why this procedure crashes if called from APEX application, but works ok if called from the same schema APEX application runs on, but using SQLDeveloper ?
Any thoughts are appreciated.
Radian

The procedure apex_cdc.enable_table_capture i created myself with no authid mentioned explicitly, so it uses definer rights, by default.
BUt this procedure is simply a wrapper for sys.dbms_cdc_publish.create_change_table.
When I look on the security model for this sys.dbms_cdc_publish, i see it runs under invoker rights. (http://www.psoug.org/reference/dbms_cdc_publish.html).
The code is like this:
CREATE OR REPLACE PROCEDURE enable_table_capture
          i_owner               IN VARCHAR2,
          i_change_table_name     IN VARCHAR2,
          i_change_set_name     IN VARCHAR2,
          i_change_source          IN VARCHAR2,
          i_source_schema          IN VARCHAR2,
          i_source_table          IN VARCHAR2,
          i_column_type_list     IN VARCHAR2
     IS
     BEGIN
          EXECUTE IMMEDIATE 'alter session set REMOTE_DEPENDENCIES_MODE=SIGNATURE';
          EXECUTE IMMEDIATE 'begin add_log@orcl01(i_tableName => ''G''); end;';
sys.DBMS_CDC_PUBLISH.CREATE_CHANGE_TABLE(
owner => i_owner,
change_table_name => i_change_table_name,
change_set_name => i_change_set_name,
source_schema => i_source_schema,
source_table => i_source_table,
column_type_list => i_column_type_list,
capture_values => 'both',
rs_id => 'y',
row_id => 'n',
user_id => 'n',
timestamp => 'y',
object_id => 'n',
source_colmap => 'n',
target_colmap => 'y',
options_string => NULL);
END enable_table_capture;

Video only enabled when call is initiated from one direction across SIP Trunk

Similar Messages

Maybe you are looking for