Video option not getting enabled in itunes

hi, in my itunes properties, when i go to the video tab...i have a problem, i cannot enable it, it wont let me do it, it is not highlighted, so i am unable to upload videos to my ipod, what shud i do. thanks.

Just to check, are any of the videos labeled as TV Shows?
Videos Labeled TV Shows Don't Appear on iPod
Also, is all of the software up to date?
iTunes
iPod Updater
Updating iPod's Software
btabz

Similar Messages

I updated from windows xp to windows 7 and can not get into my itunes account. I get the notice that I am only allowed 5 devices and this isn't a new device just an updated one. How do I get to my itunes?

I updated from windows xp to windows 7 and can not get into my itunes account. I get the notice that I am only allowed 5 devices and this isn't a new device just an updated one. How do I get to my itunes?

Take a look at Apple's document for authorizations -> iTunes Store: About authorization and deauthorization.
You can deauthorize all computers from iTunes. All you have to do is click iTunes Store, click your account name in the upper right corner of iTunes, then deauthorize all.

Is there a way to play videos other than getting them through itunes

is there a way to play videos other than getting them through itunes. I have lots of dvd's that I want to play on my ipad but don't want to have to buy them again through itunes.

You'll need to rip the DVDs to your hard drive using a tool such as Handbrake. Be sure to rip them in an iPad compatible format. Then you can drag them into iTunes and sync them to your device. It is a little bit of work but that's really the only way without (as you say) rebuying them in iTunes.

I can not get into the iTunes store for the past two days. I can do a search on the music in upper right corner. However, the screen is white with "iTunes" in the middle when I do. Any suggestions? Thank you.

I can not get into the iTunes store for the past two days. I can do a search on the music in upper right corner and get a drop down list. However, the screen is then white with "iTunes" in the middle. Any suggestions? Thank you.

Check out this Apple article -> iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
If your computer has one of the LSPs listed you may have to reset winsock.
If not, you may want to give this article a shot -> iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

HT201272 My purchased videos are not listed in my iTunes purchased list. How do I re download?

My purchased videos are not listed in my iTunes purchased list. How do I re download?

Films and/or TV programmes cant be redownloaded in all countries. If some show in the Purchased tab in the iTunes store app on your iPad but not all then have you changed countries since buying them, are they still in yoru country's store, and are any hidden : http://support.apple.com/kb/HT4919
If you can't redownload them then do you have copies of them on your computer's iTunes library and/or on your backup of your downloads/library so that you can sync them back to your iPad ?

I have an ipod classic 120gb. Its not getting recognized by itunes.

I have an ipod classic 120gb. Its not getting recognized by itunes and i am unable to format it even though it says i must if i want it to appear on itunes. It does'nt work on any computer so its not the usb. ive reset it a few times but no luck. Any ideas?
Here is some of the info i got, im not sure however what they represent.
Retracts: 534
Reallocs: 216
Pending Sector: 62
PowerOn: 1253
Smart/Stop: 469
Temp:Current 27c
Temp:Min 5c
Temp:Max 56c

If Windows or Mac can recognise it, then reformat it using a Hardisk Partition tool, if not, it is time to replace the Hardisk.
The High Pending Number, indicates some bad cluster, which Hardisk firmware can't reallocate or remapped. This maybe due to, leaving the iPod in a Hot environment, damaging the Hardisk.

HT4623 i have iphone 4 with 4.3.2 version, i want to upgrade the software. but my phone is not getting synchronised on itunes and not getting detected. please help me

i have an iphone 4 with 4.3.2 version, i want to upgrade the software. but my phone is not getting synchronised on itunes and not getting detected. also there is no update software tab under settings.please help me

If your phone isn't being recognized by your computer, you need to follow the steps in this article to resolve that
Also, some basic isolation needs to be done. Does it show up in itunes on any other computers? do you have other cords you can test with to see if it might be the cord? if the phone doesn't show up on any computers, it's likely your phone has a hardware issue
http://support.apple.com/kb/TS1538?viewlocale=en_US is the article to use if you want to concentrate on trying to get a particular computer to recognize your phone

My iphone is not getting connected to itunes. What should I do?

My iphone is not getting connected to itunes. What should I do?

See this support document and follow the directions. http://support.apple.com/kb/ht1212

I was updating ipad 2 to ios 5 it downloaded and was updating and update stoped in betweend and right Now when I am restarting my Ipad 2 it is showing i tunes logo and it's also not getting detected in itunes. Please help

`I was updating ipad 2 to ios 5 it downloaded and was updating and update stoped in betweend and right Now when I am restarting my Ipad 2 it is showing i tunes logo and it's also not getting detected in itunes. Please help

Hi Demo, thank you for your suggestions.
I've tried updating in the following conditions:
1. "Over The Air" at one location;
2. On a Windows computer running the latest version of iTunes at the same location;
3. On Mavericks (10.9.4) running the latest version of iTunes (11.4 (18)) at another location;
4. On Mavericks, latest iTunes over a VPN with a server location in US;
5. On Mavericks, using a 3G connection shared from an iPhone;
6. On Yosemite developer preview with a previous version of iTunes at the same location.
I got the same results in most cases except for an occasional error with code 9; I'll try again in other conditions.
Interestingly enough, I've successfully updated my devices to iOS 7.1.2 and to iOS8 GM without any issues at the same location but, of course, no two conditions are exactly the same

IPad (2) Recovery Mode, not getting detected by ITunes on the PC

While upgrading my IPad (2) to IOS5, it has gone into Recovery Mode. NOt it does not get detected by ITunes on the PC - doesn't appear on the sidebar. I've completely uninstalled all itunes and other Apple components and reinstalled Itunes on PC - no change. IPad is still in starting screen mode and not detected by PC. Please help.

See if this page helps : http://support.apple.com/kb/HT4097

IPad Not Getting Backed Up-iTunes Library Deleted

I accidently deleted my iTunes Library from my PC. I don't think that can be restored again. However, I still have a couple of apps and games on my iPad and I want to back them up on my PC again. But those apps are not getting backed up/synched now. Please help.
Thanks

Can some one please give me some instructions on how to recover my Itunes library from my Time Capsule.
Do you have *Time Machine* enabled? Time Capsule is a wireless, external hard dive.
Go to Time Macine icon in the menu and select *Enter Time Machine*.
Select the Music icon on the left side of the Finder window.
Scroll back in time Machine to when you want to Restore from.
Make sure \Music\iTunes\ folder is selected then click on Restore.
Make sure you select *keep the restored items* if asked.

Master data is not getting enabled in the InfoSet.

Hi Experts,
I have 3 DSOs in an InfoSet and I have also brought 2 Master data infoobjects in this infoset.
The master data check box in the infoset is not enabled and also not getting displayed in the Query Designer.
Can anyone please let me know how do I bring the master data in the query???
Also please advice me whether I should have only 3 DSOs in the infoset.
Please help.
Thanks

Hi,
In my DSO I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

QFS mount options not getting noticed.

Hi I have a small issue it seems that none of my QFS directives are getting noticed im not sure if this is true or not but this is what I have tried and i am unable to verify that these mount options are actually taking effect..
This is QFS Version 4 revision 4.0.26FA
in my /etc/opt/SUNWsamfs/samfs.cmd I have the following options
fs = qfs1
nosuid
sync_meta = 0
qwrite
readahead = 4096
writebehind = 1024
after mounting my file system why are these options not listed in mnttab
qfs1 /qfs1 samfs dev=1d80036 1048280993
using dd/time to write data to this file system im getting the exact same performance no matter what options I set. another reason why I think these options are being ignored is the following
if I set for example fs = qfs1 and high = 70 low = 30 when I check samu [m] option I dont see those values reflected in the m output so what im asking is there anyway to verifty that my mount options are being set occordinly ?
Yes I did use mount -o nosuid,qwrite,etc.. /qfs1 still no difference and even placing the options in vfstab seems to not make any difference.
last but not lease if i do a samtrace -V while mounting my /qfs1 filesystem I see the following
00100000 readahead (1048576) <<--- still seems to use the default values 1024
00080000 writebehind (524288) <<-- 512 look @ my samfs.cmd file this should but not the value.
Any assistance would be nice.

Hi There! Sorry, it took so long to get back to you. This should help:
The samu N display shows all the mount options. You can also use the samfsinfo command to see file system build information. If the samfs.cmd options are not being picked up, make sure the file is formatted correctly (no odd characters) and is in the proper location, /etc/opt/SUNWsamfs/samfs.cmd . Then "pkill -HUP sam-fsd" to assure the daemon has picked up the file's contents, and then mount the file system.

30 GIG Video iPod, Video Options not available - Please help!

Hi.
I have a 30 GIG iPod Video 5th gen, with the latest iPod updater software installer on it.
But when I look at the iPod preferences, when it's plugged in via USB, all Video options (manual vs automatic etc) are all greyed out and not available for selection.
And I can't drag any videos onto the iPod (even with the right video format!).
It's like the iPod itself doesn't recognised that it is an Video one, like it has a complex and can only deal with music and photos.
Can anyone help or offer advice?
Anyone had a similar problem?
Any help would be greatly appreciated.

Thanks for your help guys.
Even with the iPod set to manual, I couldn't drag iPod format videos directly onto it.
Did a factory restart, and it has fixed the problem.
And just a note; the options in the video tab will always be greyed out, when the iPod is set to manually update songs.
cheers!
bc

After saving GRN part1 tab not get enabled

Hi,
All excise details get reflected in GRN from PO , i have entered all details such as excise number, Excise date etc related all data
excise.
But after saving GRN part 1 tab not got enabled which contains serial number , part1 number . which is not case of other GRN.
Please help me why this is so ?
Regards,
Rajendra D. Sawant.

Hello,
Please can you confirm are you working in ECC 6.0.
Please check the material and vendors are mentioned in J1ID table. If J1ID does not contain the material and chapter id combination ,then system will not give you, excise tab in MIGO.
And
After save of MIGO system will not show excise or part1 tab in MIGO display This is sap standard. you have to check in J_1IPART1 table with ref to Material doc number.
Regards
Mahesh Naik

Video option not getting enabled in itunes

Similar Messages

Maybe you are looking for