Video out in 64 bit mood

hi guys,anybody has a solution to let logic give me a video out put through my decklink HD video card?
thanks

sorry i forgot to mention that im using logic on 64 bit mood.

Similar Messages

Video Out in any phone

I'm sure this has been discussed, but is there any blackberry phone which does or is being designed that allows for video out to be played on other devices. this is a major flaw that I think blackberry has overlooked or myself that all the other smartphones have. Any advice or suggestions. Thanks.

sorry i forgot to mention that im using logic on 64 bit mood.

MacBook Video Out problems.

Hey all.
Bit of an issue regarding my Macbook. It's a 2ghz Duo With ram upgraded to 4gb by myself. For some reason the video out on my Macbook has decided to stop working. Is it possible that it's hardware related? I have tried the following.
1: Bypassing my Onkyo TSR 609 amp straight to TV
2: Lowering resolutions (although 1080i and p was fine)
3: Bootcamping into windows to see if its an OSX issue. (my friends Samsung laptop works just fine through all the various combinations)
4: Punching it.
Im at a loss now, was working fine, got my new amp and was working fine through that for a week (havent changed any settings on it, and as I said same issues straight to TV which is a 42" Sharp XD1E) and the picture just comes out as multicoloured digital noise but you can just about make out whats on screen.Its a fairly weak connection on the MiniDVI port on laptop itself, It's connected via MiniDVI to DVI/HDMI dongle. I have also swapped out cables. It's not the amp as my PS3 blasts out 1080p with NO issues, please help!

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

Video out to monitor acting goofey!

Hi
I have the Canopus ADVC-100. FW from MBP and FCE to the ADVC, composit to my TV monitor. Went to Video Out-Refresh Video devices, then checked the NTSC.
Yesterday it was working perfectly. Today the video shows on the monitor but when I hit the JKL keys, the video doesn't move. Just sits there until I hit the K (stop), then the picture jumps to where the timline playhead is.
A week ago it worked perfectly, then this freezing started again. 1 day good, 2 days later bad! I'm at my wit's end.
This really all started when I had my external LaCie HD in the FW800 port and the Monitor in the FW400 port. My eSATA cable and PciE card kept unplugging from the MBP so that's when I put the LaCie into the FW800 port.
Then I noticed that when 2 items were plugged into both of the FW (400/800) ports the FW 400 wouldn't work. Could it be a problem with the controller card in the laptop? That's when I put the LaCie back onto the eSATA, and that's when the monitor strted working right again. But now it's back to it's old tricks
I don't know what else to do and I need that monitor. I tested the Canopus box by plugging it back into my HP and running video out from Vegas. It works fine.
Anything else I can do here?
Allen

Hi Martin
Thank you very much. What good is it if you have a FW400 and FW800 and you can only use 1 at a time? That sort of negates even using a FW hub if there is such a thing. Or possibly daisy chaining HD's? Is the Mac Pro any different from the MBP? I have 2 FW HD's and need to transfer files between them. My LaCie and a small portable HD. How's that gonna happen if I can't use both FW ports? Yes, right now I got the LaCie on the eSATA port though but let's assume I need to use both the FW ports! My God! Even my PC's don't work this way. And I want to switch to all MAC's? Hmmmm.
Secondly, after I posted the original message, I happened to re-size my canvas window by making the browser and viewer smaller and as soon as I resized the window the darn thing started workiing! I don't believe this. I'm not shutting anything down tonight! H9nestly! I didn't do anything else except resizing the Canvas window!
As far as your instructions, I believe I mentioned above that the MBP does see the ADVC. There was a frozen still on the TV monitor. It just didn't move until I stopped the timline from playing. Then the TV picture jumped to where the playhead was. I wasn't getting video, just stills.
Now it's working so I'm wondering if there isn't something not right with my MBP? I have the extended Apple Care but I need to get this project done. Another bit of info is that the timeline contains 11 hours of video! But the LaCie on the eSATA seems to be keeping up. All the video files are on the LaCie scratch disk. In other words I can play the timeline just fine. Now we started creating separate sequences for different parts of the video for ease in editing the sections.
Well, tha's all the info I can give you. this is really wierd!
Allen

S-Video Out Changed? Looks Bad

Trying 10.5.1 booting off external drive with a PowerBook 17inch, G4 1.0, 1gig ram with nVidia GeForce4 MX graphics card. Using the S-Video out to my Plasma TV looks very interlaced, like bad anti-ailsing, can't read anything in the top menu bar. When I boot the same setup in 10.4.10, looks fine, can read everything. Did Apple delete some drivers? I'd love to use Front Row now but even that has jagged edges. This is also at 1024x768 res, mirroring on, Core image is not supported, 32 bit. Any ideas?

I am using a Sony VX-2000, but I think you may be misunderstanding.
I am recording a training course about a piece of Windows software, running on a PC; so I want to show the PC's screen when the lecturer talks about specific things. I don't think a firewire out on the PC, if it has one, would be able to mirror the monitor.

Have old video tapes; compact VHS. Have camera with S-video out

Have compact VHS tape archive. Have camera with S-video out & good VHS player/adapter with S-Video out. Also have old PC with dedicated hardware capture card/cable and Pinnacle Studio. Am considering starting over with purchasing iMac for editing. I could capture on the old PC and move files to iMac. If I want to do it all on iMac, what is the best way to capture and what do i need?

TExcellent suggestion! Read about it, ordered it on Wednesday and I just captured a S-VHS-C through the box from my camera to my old iMovie 6.0.3 on my G4. Worked right out of the box as advertised. Now I can experiment a bit while I muse about that I7/27" iMac I'm going to buy. I also went to the Apple workshop on IMovie/iDVD. It's a long way from my old Pinnacle Studio.

Device that can split HDMI video out

I'm starting here before i might get sold something that won't work...
Am running a late-2012 i7 2.3 quad Mini in a studio. I (will) have two matching Acer 24" LED
monitors that need to display the same screen simultaneously- the 2nd monitor in an adjacent room.
I was going to use Thunderbolt/MiniDisplayPort>DVI for that monitor but the Mini is maxed out - every
port is being used for something and i need the TBolt for an audio device. Hence am considering
splitting the video out. Question - will a passive "Y" type splitter work and does it put any extra drain
on the Mini in a way that might 'tax' it too much -- or is there a powered device that would be better
suited for this task and if so, any suggestions of a model or two that are known to be reliable?
Also, would a passive splitter make the display on either of the monitors dimmer ? I seem to recall
somebody saying they had an issue where one or the other was less bright when using a splitter(?)
Thanks for any info you might have! Much appreciated!
Mike

Hi Gary, thanks for your reply. My question then would be, of the fairly inexpensive 'active' devices pointed out in the comparison review mentioned earlier - i.e. http://hdmi-switcher-review.toptenreviews.com/
I wonder why any of those wouldn't serve my purposes fine - that is, a switcher. Or alternately, perhaps there would be cheaper active VGA (vs DVI) splitters for something in the realm of less than $100 that would do the trick. For our needs,even if i needed to run VGA (which both monitors are capable of) it wouldn't be such a critical application that this would be a major factor - vs. the DVI.. I would just be going HDMI>VGA split box>two monitors
I just recalled using a passive VGA splitter cable a couple of years ago on an old Mini now that i think about it - the resolutions matched on the two identical monitors - and both did display without distortion in that case.
Even though i believe there was a bit of a dimming effect on both, it wasn't so extreme that they weren't acceptable. Still, i would buy an active powered splitter - just wonder if i wouldn't be fine to go with something in the under-100.00 set of options shown in the 'reviews' link and if not, what the problem could be. THanks!
Mike

Axi 4 to video out not locking

Hi,
I am using the Axi 4 stream to video out and I am not able to get it to lock .I am using the IP in slave mode and have connected the VTG_CE to gen_clken of VTC.
I am running both the axi clock and video clock at 60 MHZ.
There is not VDMA in my design .Its just streaming data from a camera and doing some data width conversion and feeding to to AXI4 to video out.
I have attached the main part of my block design . I have also attached wave forms.
Please help me on this . I am really stuck

Hello,
There are a few things that I'd constitute as a little 'strange' meaning not the usual use case.
1) What exactly is the data width converter doing? Why are there so many tuser bits? Tvalid/tlast coming out of it look good, but what about tuser? It's not doing anything funny, is it?
2) Your frame size (active) is really 120x768 pixels? Are you doing some sort of cropping? Can you put your camera in a more standard mode first to make sure everything else is correct?

Premier CS 6 video out not clear

Premier CS 6 video out not clear and video have some color patch (grey ) not satisfied quality.
My System -
Premier CS 6
Mac 10.8 lion, quadcore 6GB ram
Blackmajic Decklinkcard
Please help how to broadcast quality out.
thanks....................................................

The links Harm provided influenced the original build, but on his advice, I re-read them and decided to alter it and bit.
If I swap out the ASUS Rampage for the Deluxe model, replace the Velciraptor with a Seagate 2TB, and the water cooling with a COOLER MASTER, Hyper 212 EVO CPU Cooler (rated Gold by hardwaresecrets), then I can upgrade to the larger COOLER MASTER, HAF 932 Advanced and keep the price about the same.
Given my projected video editing demands, it doesn't seem like the ASUS Rampage MB offers much more than the ASUS Deluxe MB and the latter contains BT and wireless.
Since I do not intend to OC, there doesn't seem to be a great need for liquid cooling, especially with the larger tower case. At any rate, it does feel better not put "liquid" and "computer" in the same sentence!
The Corsair AX850 Gold power supply does indeed seem to be a better choice.
There doesn't seem to a concensus in the all the discussions relating to using a SSD vs a hard drive for the boot disk. However, since boot speed is not an issue for me I don't need an SSD and the Velociraptor seems to a unnessary expense. While I don't need 2TB for the boot drive, they are not much more than the 1TB.
The only question remaining is filtering the air. This machine will be in a dusty (but not dirty) environment. I read Harm's thoughts on air filtering provide in his link, but don't want to go the custom route. These aftermarket filters look nice http://www.frozencpu.com/products/11729/ffi-57/DEMCiflex_Cooler_Master_HAF_932_Magnetic_Du st_Fan_Filter_Set_-_4_Piece.html, but for the cost, I'd rather put another $50-60 into the case and get one with good filtering.
Does anyone have experience with a stock Full Tower with complete built-in filters they have actually used in a dusty environment they would be willing to share?
Message was edited by: VideoShui

What is meant by "Video Sample Size = 24 bit"?

In the video properties for a XVID file you can see "Video Sample Size 24 bit" included with bitrate, frame size, but "file size in MB or GB" omitted.
What is this Video Sample Size? Is it the same as "bit depth, also known as color depth" that relates to the number of bits used to represent the color of a single pixel in an image?
I know how to calculate/estimate the file size of a single image from bit depth information such as 12 bit, 24 bit and frame size, but can you calculate the file size of a video from it frame size, bit depth? Question is based on Video Sample Size really being equal to bit depth.

Yesterday seems to have been a bad day for the Adobe fora. I had three very similar instances of what Tony experienced. I'd be reading/posting in the Premiere CS3 forum, and when I'd hit Post, after the screen came back, I'd be in the CS2 forum, and that's where my post would appear. Similar behavior in several other Adobe fora too.
Some of the screen displays got very wonky, and I had one of those today. When I went to open an article in one of the fora, there was one reply. I posted to that, and when the screen came back, about 8 replies displayed! All were from days before, but had not shown up, until I posted.
I might have helped Tony out in the forum that he intended to post to. Maybe Jeff, or someone can clean up a bit. I think there will be a lot of this, and I'm not sure it's working smoothly yet.
Hunt

Video out via firewire

Is color capable of outputing preview video through my DVCam deck via firewire? The option in the video out preferences seems to be grey out as are the other options in there.

I had forgotten I'd posted this and I need to make a clarification.
At the time of this posting, I'd been assured by Blackmagic Designs that Color would preview externally through their Intensity Pro card although in 8-bit video. Since the time of this posting and upon further query with BM tech support, I was told the Intensity Pro could not be used in this function.
Sorry if there has been any confusion caused by my statement.
Zeb

Fixing sound on video out

Hey, I'm using a video-out cable and a mini-jack-to-RCA cable to run sound and video from my MBP to my television. The picture works fine, but the audio track is a little wonky... Soundtracks and sound effects are a bit too loud and speaking parts are a bit too quiet. This isn't a problem when I'm watching on the MBP not run to my TV (either on the laptop speakers or on headphones).
I think the problem is that there some sort of automatic detection that thinks because the minijack is running to the RCA inputs for audio that I'm using headphones and need some sort of sound optimization.
I'm using the VLC media player. Does anyone have any experience with this issue?
Thanks.

Unfortunately, running that doesn't seem to do anything. The only selectable output options are "basic audio output" and they can't be configured. I read the help file, which suggests installing software that came with the device... But the device is a TV. A standard, regular type TV.

My mac recognizes new Radeon 5770 bought as an g.c. upgrade. no video out.

hello. i bought an mac graphics card upgrade and the mac recognizes it. now, i get no video out. i am using a DVI to VGA port which i am using now, so it works fine. below the info on the card as it shows:
Chipset Model:          ATI Radeon HD 5770
Type:          GPU
Bus:          PCIe
Slot:          Slot-1
PCIe Lane Width:          x16
VRAM (Total):          1024 MB
Vendor:          ATI (0x1002)
Device ID:          0x68b8
Revision ID:          0x0000
ROM Revision:          113-C0160C-155
EFI Driver Version:          01.00.436
why am i not getting any video off it? and how should i troubleshoot this?
ty for your help.

You cut the bottom off that info. What does the rest say?
EFI Driver Version...
Displays:
Cinema HD:
Resolution:          2560 x 1600
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:          CY_________
Main Display:          Yes
Mirror:          Off
Online:          Yes
Rotation:          Supported
Display Connector:
Status:          No Display Connected

Video out from ABC app to my TV

I have ABC's app that allows me to watch their shows. It works fine on the iPad, but when I connect an Apple Composite AV cable to my TV all I get is sound. No video. I have my iPad set to video NTSC but I don't get it on my TV. Any ideas out there? Thanks.
donald

Only a few apps right now support the Video Out function... the developer is tasked with making their apps compatible with this...over time more and more will I assume... For now only a few native apps are like the Movies in iPod section or the Keynote App (strangely Pages and Numbers are NOT supporting video out currently)

Video out from iPhone 3GS to TV.

Can I use the standard (3 phono plugs on the end) video out lead I already have to view keynote presentations from my iPhone 3GS on my TV/Projector?

Same problem here.
I can't get any video out of my faithful iPhone 3GS running iOS 6.xx.
I have been browsing Apple discussions for solutions and most of them seem to point out to a faulty Video Composite cable. This is not my case.
I can rule that out 100%.
Old iPhone 3G running ios 3.1.2 works just fine as well as does iPhone 4, with the same cable.
I have tried with a friend's TV and cable and iPhone 3GS and we have identical issues.
(different cables and phones, same issue).
Please note all testing has been done with genuine Apple Video composite cables.
So this points out clearly to a iphone iOS issue combined with hardware.
It appears that starting from iOS > 5.0 video output has been disabled on earlier iPhone models prior to 4.
It would be nice if Apple could issue a Knowledge Base document on the issue as that would save many people further testing and waste of time.
This document http://support.apple.com/kb/HT4108? isn't really complete enough as it stops at iphone 4.
Has anybody the ultimate answer on this issue?
Are there any known work-arounds?
Thanks and regards
Pieter

Video out in 64 bit mood

Similar Messages

Maybe you are looking for