VIDEO OUT OF SINGLE FRAMES ?

I use Premiere Pro CS5 to get video out of my 3d renderings. But I have a bad problem:
I can import numbered picture files to get a clip - which works fine. The single frames have been rendered already 1920x1080 for full HD video.
The problem is - I can´t get a playback within the preview or working window. While the cursor runs smoothly through the frames within the sequence window, the preview window jumps and shows some random frames only.
If I import the exported file back, it will playback smoothly without problem, this way my machine should be capable to do it as it is same resolution, only video instead of single frames.
Anything I can do to get smooth playback of image sequences ?
It doesn´t make much sense to export video first before being able to add sound as I don´t have any control for syncing while the clip is a numbered frame import only.

Thanks a lot for that hint - this way I should consider to get another HD - though there is plenty of capacity on my 1 TB build in.
I don´t do much video editing yet - don`t even have a camcorder, just trying to do some 3D rendering videos. As these use to have few seconds only I never considered to get additional hd space for that.
Just made another observation - I did a 8 second test rendering overnight at 800 x 450 - this plays fine after being imported. It´s just the native HD rendered 1920 x 1080 that cause that trouble...

Similar Messages

Slow video down to single frame, pause a few seconds, then speed back up?

I'm working with a video clip where I'd like to show a single frame for a few seconds. I think I can figure out how to slow down the video for a second or two surrounding the desired frame, but I can't figure out how to pause or freeze it at that point.
I'd like it to be fairly smooth on the slowdown, stop, and start up, I'll also have the audio slow down and stop, I think it will be a neat effect.
Any good ideas?
iMac 20" Mac OS X (10.4.10)

I'd like it to be fairly smooth on the slowdown, stop, and start up
A possibility is to use the Time Remap free filter. Use the default Mode (Variable Speed) and keyframe the Speed control from 100% to 0% on the frame you want still, and back to 100%. You can also use the Smooth contextual command on the 0% keyframe to get a smooth speed change.
What the filter does not do, though, is to change the audio speed...
Piero

Imported Video on a Single Frame

Well, I imported movie speccifically a .FLV and when it
imports, the whole movie sits on the timeline under the first
frame. Is there any way I can get this movie to be expanded and
take up the correct amount of time on the timeline? Example: If the
imported a movie 23 secs long, I want it to show up on the timeline
as 23 seconds long.
Thanks ahead!
Generation 7.1

Yes, you can embed it in the timeline.
Here's a video that I created to explain how to do it:
http://www.screencast.com/t/Jb5o7PZsk

Adobe speed grade Exports video as a single frame

Here is a video i put together of the problem i dont get what im doing wrong. even when i export exactly as every tutorial does something still messes up. please help
http://www.youtube.com/watch?v=NtVhdgIBsio&feature=youtu.be

Try to enter output name manually (delete Src.PathElement.0 in file name box)

Is there an app or way that you can take a single frame out of a video shot on the iPhone and use it as a picture?

Is there an app or way that you can take a single frame out of a video shot on the iPhone and use it as a picture?

I don't know if there is an app, but you can take a snapshot of the video. I do this all the time. You just need to hold down the power and home key once and it will take a snapshot.

External Video - No longer plays video...? Only shows single frames

Hey all - thanks for stopping by! I am hoping for help as soon as possible!
So I've been doing fine on my project up until I did the FCS 2008-03 update today... ugh (I know I shouldn't have).
I use 2 monitors; one for my timeline, etc. the other for full screen playback. It's worked swimmingly for the past month. Now, it will only play a single frame back - wherever my playhead is, generally. But takes a second to refresh.
I have external video set to "all frames" and have refreshed the external devices, restarted, reverted to QT 7.5, etc.
What can I do to get back to where it was working?
A black magic card is installed but I'm not capturing anything right now. Will that still affect it?
Thanks to all who stop by
Specs:
FCP 6.0.4
QT 7.5
10.4.11
G5 2GHz
2.5 GB DDR SDRAM

Try all these?
Shane's Stock Answer #8: External Monitor Viewing
CUTTING SO YOU ONLY SEE THE TROUBLESHOOTING THINGS
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section.
Shane

Videos now single frame with audio only

My 30g video Ipod's videos now show up under music. When I try to watch them they are just a single frame and I get the audio. The videos are fine when viewed with Itunes. How do I get my videos back to normal videos???

correction: it works fine on my ipod when I have the "TV out" setting set to "off", but I'm only getting audio on my TV when I have the setting "TV out" set to "on." It has worked fine in the past.

Power Mac Mirror Door DVI or ADC to SINGLE RCA VIDEO OUT to a TV...adapter?

I have a Mirror Door G4 tower that I would like to use as a media center, with an old(er) Magnavox 19" television that only has the single yellow VIDEO IN jack, and the red and white audio L and R. Is there a converter cable that is similar to the one I used to use with my old G4 Powerbook which took the mini DVI and turned it into either composite video out? (I think it was Mini DVI, maybe ADC, whatever that little square video out on the Powerbook G4). I am prepared for low-res results, mostly just want to look at the itunes window and occasionally view utube clips or DVDs.
Also, does the G4 take the original Airport card (not the extreme), and if so does it need a separate antenna the way some G5s do?
And finally should I get good results with a Bluetooth dongle plugged into a USB port on the rear of the G4 when connecting a white Apple wireless keyboard?
Some of these answers will of course sort themselves out with experimentation, but any tips or experience in doing these things would be greatly appreciated.
Thanks, m.

I expect the weasel-words in Apple's description are there to be sure that whatever Video card you choose, the card does actually provide the signals needed. These are the VGA-equivalent signals around the Bar at one end of the connector. That gets you Red, Blue, Green+Luminosity, H-Sync and V-Sync. Those signals in combination are all that is needed to build S-Video or Yellow-RCA composite video On-the-Fly (not buffered).
The signals can be sliced and diced to get slightly different versions of Analog Video using adapters built around the SKART interface. There is a cheap one-chip wonder converter used in lots of converters, also loosely called SKART.
http://en.wikipedia.org/wiki/SKART
This does NOT do conversion to Digital Video, DVI, or HDMI when starting from VGA. That kind of converter has memory and scanning hardware that pushes the cost up higher than the price of an display card.
Message was edited by: Grant Bennet-Alder

I want to play video on my computer to make some analysis to frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program

HI All
I want to play video on my computer to make some analysis to it's frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program .
I used IMAQ AVI Read Frame VI
for example I have avi video It's frame rate is 25 fbs ,my image processing code is very fast that can process more 25 fbs,so I want to accelerate video acquisition

Hi abdelhady,
I looked into this further, and reading an AVI file into LabVIEW faster than its frames per second won't be possible. LabVIEW could read in frames faster than 25fps, but because it will be pulling the available frame at that point in time this would just give you duplicate frames. If you want to be able to read in frames at faster than 25fps, you would need to speed up your AVI file before reading into LabVIEW.
There's a good shipping example to show how to read in from an AVI file, "Read AVI File.vi". You'll notice that they add timing to make sure that the while loop runs at the right speed to match up with the frames per second of the file being read. This is to make sure you're not reading duplicate frames.
Thank you,
Emily C
Applications Engineer
National Instruments

Buffering pauses and audio/video out of sync, single RTMP stream w/ simple embed

Hello,
I am running Flash Media Server on my dedicated CentOS host, and finally connected a single RTMP stream fine and am able to embed and play back the stream, but I am getting constant buffering pauses (approx every 5 secs) and audio/video out of sync by at least 5 seconds. My CPU with Flash Live Encoder is a powerhorse, never over 25% processor or ram usage while streaming, and my upload internet speed is averaging 6-8 mbps which should be more than adequate. I fear the issue is server side, however port 1935 is open and in use, not firewalled on CPU nor the host.
Any suggestions would be great.

Hello,
Thanks for the reply, I am using embed code generated with Flash Media Playback, as follows:
<object width="640" height="480"> <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf"></param><param name="flashvars" value="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F%2Fsq uarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=false" ></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="480" flashvars="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F% 2Fsquarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=fa lse"></embed></object>

Making a video with single frames

Hi,
I'd like to make a video with single frames.
One of my computergames is able to take 25 frames per second (or 30, 40 etc.). The game saves the frames in a folder. For one minute there are over 1000 frames.
Now I need to know, how I can tell After Effects that every 25 frames are one seconds.
I just want to make a movie of this game. This will be the easiest way if After Effects can handle with these single frames.
Is it possible? I will be very happy if some can explain me the way to realise my idea.
Sincerely,
RazooN

Footage Interpretation and preferences for image import.
Mylenium

Videos become single frame when exporting iPhoto album

I've gotten the hang of how to organize pix and vids in an "album" and get them renamed. Now I just want to give those renamed reordered photos on discs to other people that will be on Mac and PCs. This apparently means using the "export" feature, as burning an album directly from iPhoto won't produce a disc usable by a PC.
"Exporting" the album succeeded in making a new folder elsewhere on my computer containing all of the images and it preserved their names. However, I noticed all of the Quicktime and AVI files had very small file sizes. When I double click on a .mov file, for example, it opens in Quicktime but it is now only a single frame. Same is true for the avi files.
Any suggestions on another export setting tweak I need to do to get this right?

You shouldn't have to change it to original though. And if it isn't exporting the actual movie, it should show up as a pic, not have the video icon. I lost important footage from hurricane Ike because I was in a hurry, and trusted the app. Then I go to look at the videos in iMovie, and they aren't even recognized. Current should be whatever it is. Currently that was a video, not an image. Sad.

I have an Iphone 4. I have a video I took with the built in camera. Is there a way I can edit it to isolate a part of the video that I can print a single frame?

I am looking fo someone who can tell me how to edit a video taken with my Iphone 4 so i can copy/print a single frame from that video rather than the entire video. Thanks in advance

What you can do is play back the video in the Photos app, then pause it. Tap the screen to make the controls go away. Then you can take a screenshot: Quickly press then release the home and power buttons at the same time.

Video Playback Option in "Preferences/Audio-Video Out"

The following did not make it into the User Guide, though it did get into the troubleshooting docs:
http://www.adobe.com/support/techdocs/332121.html
332121 Video Playback option in Audio/Video Out preferences (Encore DVD)
A new option was added to the Preferences menu of version 2.0 of Adobe Encore DVD. When you select Edit > Preferences > Audio/Video Out, you see an Automatic option in the Video Playback section. This option is selected by default, allowing Encore DVD 2.0 to play video in a Standard Direct3D mode. If the feature is not selected, then video playback will be in GDI mode.
The only reason to deselect this option is in the case of poor preview playback or black video. In order for the change in preference to take effect, you must close the Monitor panel and then reopen it.
Background information
Encore DVD 2.0 (unlike previous versions of Encore DVD) uses the Premiere Pro playback engine for video playback. Premiere Pro has three Desktop Display modes: Compatible, Standard, and Accelerated GPU Effects. In Compatible mode, video is played using the GDI. In Standard mode, video is played using Direct 3D. In Accelerated mode, video is played using Direct 3D with GPU.
The default setting for Encore DVD 2.0 is comparable to Premiere Pro's Standard mode (Direct 3D). When the Automatic option is deselected, it is comparable to Premiere Pro's Compatible mode (GDI).
If Adobe Premiere Pro 2.0 detects a Direct 3D error when previewing in Standard mode, it switches to Compatible mode. Encore DVD 2.0 does not have this capability, nor does it provide the same option in the User Interface for the user to switch between the three display modes. This is why the Automatic option was included in the Audio/Video Out preferences.

Welcome to iMovie Discussions.
Sounds like you've been shooting at p ("progressive") frame rate (..24p or similar).
iMovie can't handle that (..except for JVC's 720p footage..) and it thinks that each frame is a "field" (..half a frame). It therefore plays those frames at double speed, thinking that there should be two 'fields' to a single frame.
Did you shoot at a "p" frame-rate..? If so, you'll need to convert the material, with some other program, so that iMovie can handle it.
I can't remember offhand what software might do this, but if you were shooting in HDV hi-def (which is recorded in the camera using the MPEG-2 video system) you may be able to use MPEG Streamclip (click on that blue link) to "unscramble" your material.

Single Frame Exports From the Viewer Window

Why, when i choose to 'open in viewer' from the timeline, does it only export a static frame, or sometimes single frame, when i choose to export using quicktime conversion?
Alternatively, i have to make an in and out point on the timeline, and export that way. But this is clumsy, because i often want to send out a piece of video, where on the timeline, there are often 2 or 3 video tracks over that one, so i have to delete, or make opaque these track.
Also, opening in viewer and exporting automatically makes the correct clip name. Which is very handy.

Not sure. But a simple workaround for the scenario you mention is to just copy the clips from the track you want, to end of the timeline or another sequence and export from there.
rh

VIDEO OUT OF SINGLE FRAMES ?

Similar Messages

Maybe you are looking for