Video out of sync in timeline

Hey,
I got one video clip with funny things happening. I now try to sync different sound effects to these funny things.
When I play the project from the beginning they all sync fine.
But as soon as I try to view the project starting a couple of seconds in, nothing syncs anymore. It seems like the video plays way to slow when not started from the absolute beginning.
What to do?
(The project is in 25fps and the videoclip is also recorded in 25fps)

Since CamStudio is open source software, there's not much documentation online so I can't tell what codec their AVIs use. (If you want to know, you can open the AVI in Windows Media Player, go to the File menu and select Properties.)
But converting it from whatever it is to a DV-AVI before you bring it into Premiere Elements will likely solve your out of sync problems. I'm not sure which program will convert it, but you can try Prism.
http://forums.adobe.com/thread/415317?tstart=0

Similar Messages

Audio/video out of sync (audio delay) with PowerBeats wireless earphones.

I am having a problem with audio/video sync between my PowerBeats Wireless earphones with my MacPro and MacBookPro. I have tried pairing, playing the video, pausing the video, turning off the PowerBeats, tuning the PowerBeats on, then starting the video playback again. I have the same audio delay so this not working for me. Anyone have an update as to how to fix this audio/video sync problem?

I am playing MPEG-4 movie files. I did open MPlayerX from my dock, then pulled down File to select Open which then did show the folder where these movie files are stored. Then I was able to select a movie file, open it, and use "Decrease Audio Delay" to closely sync the audio with the video. I say closely because it is not perfect. Rather than stepping each increase or decrease in one tenth of a second, perhaps a finer adjustment would have been in milliseconds. This is the adjustment that I have with my AVR to sync the audio with the video, so I know this is a possible increment adjustment. The perfect adjustment was in between -0.4 and -0.5 second,however, this was not possible in one tenth second adjustments. The closest adjustment was with -0.4 second rather than with -0.5 second. So, adjustments in milliseconds could have been very near a perfect sync. Perhaps later versions of MPlayer will offer the adjustment selection in milliseconds. Nevertheless, this is working much, much better than before. Thank you so much. I have spent most of this day researching this problem and you have come up with by far the best solution. This problem goes all the way back to 2010 and possibly beyond for Apple products. There are hundreds of reports documenting out of sync audio/video issues with no solution that works as well as MPlayerX. Even the Beats support staff have no idea of how to resolve the audio/video out of sync.

Audio And Video out of sync in Final Cut, but not in quicktime

I heave searched the forums to no end to find the solution to this issue, unfortunatley, I have not solved the problem.
I am using Final Cut 4.5 on a G4 running OSX 10.3.4. This system has worked perfectly for years with no problems. Neither the system, hardware, or software has ever been changed on this machine. Suddenly last week, despite perfect sync while previewing the capture, the Audio and Video were of sync in Final Cut, but when checked in quicktime, there were no problems. That is how I eventually figured out this was a final cut problem.
By out of sync, I don't mean it is by a specific number of frames that can be adjusted and then everything is fine, the sync seems to drift so that if you edit the audio to be in sync in one part of the video, it won't be at the end. Also, it is out of sync from the first frame played, not a gradual drift.
This is definitely not an issue of frame rates or final cut settings as will be evident by the steps I took below to find the source of this problem.
This is what I did to attempt to fix the problem:
- Check drives using disc utility and repair permissions
- Remove Final Cut Preferences using Apple guidelines
- Switch hard drives
- Delete Final Cut and reinstall newer version of final cut (since the capture files played fine on Final Cut 5.1 on another machine)
- reinstall entire OSX 10.3.9, wiping the hard drive and reinstalling Final Cut 5.1
- switch ram slots, and even replace ram with different sticks from another G4 machine
None of these solutions worked. Is there some hardware problem with my G4 that is suddenly causing Final Cut to play audio and video out of sync?
Hope you can help, otherwise this otherwise great G4 is going in the dumpster!
Thanks

For what it's worth, I'm having what looks to be the same problem. Driving me insane. Here's what's going on-
Editing in FCP 6.0.2
QT was just updated to 7.3.1 the other day (hmm)
On an MacBookPro machine, OS 10.5.1
Software updater says everything's up to date of course.
DV-NTSC 24p (23.98) Advanced Pulldown Removal (footage was shot at 24PA on a DVX100b)
In Quicktime, the file previews fine, everything's in sync, everyone's happy. In FCP, the video and audio are wildly out of sync. I did a test inside of quicktime and sliced out a small portion of the media clip and did a "save as" and this small slice played in sync in FCP. However, this did not work for the entire clip. Clip is weighing in at 5.58GB for a 32 minute run.
I'm trying to multicam 2 tapes together and manually syncing these up is proving to be difficult at best. When anyone gets any ideas/leads/patches, let us know.
Grr,
Nicole
Editor, RHED Pixel

Audio and video out of sync on short recordings

I've scanned the discussions and see that alot of posters are experiencing
the same problem I'm having which is recording quicktime movies
and getting audio and video out of sync.
In most of those posts the responses seem to be that the problem gets
bad if you're making a long recording. I'm experiencing that, but...
...I'm also having the same problem on really short recordings...less than a
minute. I've coming video and audio out of my cable box, into a SONY DSR-11 VCR, then firewire out of the deck into the computer, recording the movies with Quicktime 7.1.6.
I know it's coming out of the cable box and then out of the SONY deck via firewire in sync because when I log and capture through Final Cut Pro, audio and video are in sync in preview and playback. I don't want to use Final Cut Pro to capture the movies because I want to end up with MPEG4, and I'd have to go through an extra conversion process out of FCP.
Any thoughts on why even short recordings through Quicktime are out of sync?
Thanks.

I'm having similar problems transferring VHS video to Quicktime. Another problem I'm having is when I transfer a VHS video to iMovie and then export the video to H.264 format, I have similar sync problems, even though the iMovie seems perfectly in sync.
I'm going to try to transfer several alternative video formats (video from my cable DVR, Video from live TV, and video from a digital mini cassette to try and figure out whether the VHS format is the culprit. Will keep you posted.

Buffering pauses and audio/video out of sync, single RTMP stream w/ simple embed

Hello,
I am running Flash Media Server on my dedicated CentOS host, and finally connected a single RTMP stream fine and am able to embed and play back the stream, but I am getting constant buffering pauses (approx every 5 secs) and audio/video out of sync by at least 5 seconds. My CPU with Flash Live Encoder is a powerhorse, never over 25% processor or ram usage while streaming, and my upload internet speed is averaging 6-8 mbps which should be more than adequate. I fear the issue is server side, however port 1935 is open and in use, not firewalled on CPU nor the host.
Any suggestions would be great.

Hello,
Thanks for the reply, I am using embed code generated with Flash Media Playback, as follows:
<object width="640" height="480"> <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf"></param><param name="flashvars" value="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F%2Fsq uarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=false" ></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="480" flashvars="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F% 2Fsquarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=fa lse"></embed></object>

IMovie Problems: Photo import and audio-video out of sync.

Photo import problem:
Some times, I have problems importing photos onto my new project, the photos will appear to be that just one same photo when played. It does not transit to the other photos following the first, it's just stuck on the first. Is this just an issue with iMovie '11? Are there any other ways to resolve this problem?
Audio-video out of sync:
I've checked some other discussions but I'd like to raise this issue again for APPLE. There are problems exporting my 7-minute film - the video and audio go completely out of sync no matter what format I export it to. There are not a lot of clips used. I'm now trying the method to detach the audio files from the video, hopefully it works.
These issues are bothering me, in addition to a failed firmware update on Mac OSX 10.7.2 a few weeks ago. I couldn't open my computer and I had to go to the Genius Bar to have them help me backup my files on my computer and reinstall the whole system again. Anyways, any help to the above iMovie issues are greatly appreciated. Just wish that Apple will address these current issues and not just focus on improving their products with awesome features ._.

Hello,
Thanks for the reply, I am using embed code generated with Flash Media Playback, as follows:
<object width="640" height="480"> <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf"></param><param name="flashvars" value="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F%2Fsq uarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=false" ></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="480" flashvars="src=rtmpt%3A%2F%2F50.62.40.55%3A1935%2Flive%2Fchristmastime&poster=http%3A%2F% 2Fsquarestream.ca%2Fpics%2Fframe.jpg&autoPlay=true&streamType=live&optimizeInitialIndex=fa lse"></embed></object>

Video out of sync in Final Cut Express... but in sync everywhere else!

'm working on making one video that is composed of two camera angles of the same thing. So, I have two video tracks in Final Cut Express, one for the side view, and one for the main view. Both videos are Quicktime Movies (.mov extension).
Here are the file details:
Main Cam: duration - 1hr 26min 46sec // file size - 5.74gb
Side Cam: duration - 1hr 29min 18sec // file size - 5.63gb
[the side cam video is a little longer because I started filming with that camera a little bit before the main cam and stopped the filming a little earlier]
Now, here's the problem. Both videos are in my Final Cut Express project. The Main Cam video runs fine. But the Side Cam video's video is out of sync with the audio by a lot (somewhere between 2 and 6 full seconds). Normally I would think that something had happened during the filming, but here's the odd thing: the Side Cam video plays perfectly in sync out of Final Cut Express.
If I open it in Quicktime, or even in iMovie, the audio and video are perfectly in sync for the entirely of the video. But when I import it into FCE and watch it there, whether it's in the timeline, in the viewer, rendered, or unrendered (I've tried them all), it's horribly out of sync.
So, the video plays fine and in sync everwhere except for in the Final Cut Express program. The Main Cam video, which has a very similar duration and file size and which is the same file type, plays perfectly even in FCE. The only problem is the Side Cam, and I can't figure out why this is, or how to fix it.
Another thing: these videos were not captured from a camera into Final Cut. I already have the video files on the computer, and as I've said, the audio is fine there. To get them into FCE, I use file -> import.
Also, if anyone has suggestions on how to fix this, could you provide directions of some sort? I'm fairly new to Final Cut.
Any advice would be greatly, greatly appreciated.
Thank you so much in advance!

Hi(Bonjour)!
Does both camcorders was set to 16-48 khz audio?
One way to synch audio that drifting from video (or from anoter audio lenght) is to set precisely 2 markers (one near the beginning, another near the end) in the correct lenght video track. Try to find spots where you can hear and see a common reference. The result of the workaround will put a corrected audios between those points only.
Now note the duration between those 2 markers in video track.
*Unlink the video/audio clip with the wrong duration.*
Select the drifting audio and put the 2 markers at the intended reference points.
The duration should be less or more than the video.
Use the blade tool to cut the wrong lenght audio at markers.
The tips is to set a new duration for this portion with the set speed command.
With this +new duration+, align the in point of audio with the first video marker. The out point of audio should be aligned with the second video marker.
Now the audio should match the video lenght and should be in synch.
Michel Boissonneault

Audio/Video Out of Sync (PE 10)

I have read some posts regarding this, but they have not been helpful.
I recordered audio/video with an ASUS Transformer Pad Infinity TF700T in 720p .mp4 format.
When importing into Premiere Elements 10 on a Windows 7 (64bit) PC, the audio and video are sometimes out sync when editing, and when they are rendered to the final product, they are always out of sync.
I have tried changing to other formats (.avi), as some people stated that variable frame rate issues can come up when using a non-camcorder to record video, but the .avi actually made it worse, to the point that only the audio played.
I turned my PC off and on again, and killed all background actions on the PC. The video plays fine in Windows Media Player and VCPlayer.
If anyone has advice as to how to fix this, it would be greatly appreciated. I've spent 7 hours on this project, and am more frustrated than ever.
Thank you.

nierielimladris
I have downloaded your AVCHD.mp4 video, checked its properties, and studied its performance in Premiee Elements 10 Windows 7 64 bit from the point of view of import, playback of rendered Timeline in Edit Mode monitor, and playback of an AVCHD.mp4 export of that Timeline content. I stared into the monitor to watch the lip movements as the sound played back. In any of the following I have not observed any out of sync audio.
MediaInfo basic properties included
a. AVCHD video compression, frame size 1280 x 720 @ 15.119 progressive frames per second (variable frame rate with minimum = 13.501 and maximum at 18.793)
b. AAC audio, mono.
Premiere Elements 10 project preset that I used was
NTSC
AVCHD
AVCHD LITE 720p24
In Project media, Interpret Footage told me that it recognized a frame rate of 15.0710.
Rendered the Timeline content and watched the lip movement as I listened to the audio. No out of sync audio.
For export,
Share
Computer
AVCHD
Presets = MP4 HD720p24
under the Advanced Button/Video Tab, I set for 1220 x 720 @ 15 progressive frames per second. The export settings dialog under Advanced Button/Video Tab looked like the following
I watched the playback of this AVCHD.mp4 export and again did not observe any out of sync audio.
All video playbacks were with Windows Media Player 12.
Have you worked specifically with the video clip that you provided for download? If you have and you
found out of sync audio, then I am suspecting that this might be a system rather than a video problem.
It is a way out stretch, but...there have been some strange display goings on with Premiere Elements 10 and NVIDIA video card drivers recently. For all these cases, the answer has been rolling back the video card driver instead of the typical "making sure you have the latest version of the driver installed". What video card are you using in your computer?
Please review and then we can decide what next.
Just a note...this is a public forum with many viewing. Please do not post anything that would invade your privacy or is of a personal nature.
Looking forward to your follow up.
ATR

Audio and Video out of Sync in Encore 2.0

Here's my issue:
I opened a project in Encore 2.0 that was an Encore 1.5 project. I have one timeline with a 2 hour movie and the AC3 audio file that goes with it. Encore 1.5 played the audio and video in sync from the timeline and burned discs with the audio in sync. The video is an MPEG2 file encoded at a 3.1 constant bit rate.
In Encore 2.0, when I play the timeline, the audio becomes progressively out of sync as it plays. Within the first few minutes it's maybe a frame or 2 off. By the end of the film it is about 18 seconds off (audio is playing ahead of the video).
Is this a result of Encore 2.0 conforming the audio file? If so, how am I (or anyone) supposed to attain sync between video and audio in Encore 2.0?
I have Encore 1.5 and 2.0 both installed on the same machine. As a test, I opened the project in 1.5 and played it, everything was fine. I closed Encore 1.5 and opened the project in Encore 2.0, and the audio is out of sync.
Any comments, ideas or suggestions?
Mike

Joe,
I tried creating a project with the original WAV file and it's corresponding video and found that the audio and video were still out of sync. I did a little more testing and discovered that the audio is actually being played correctly, it's the video that is not being played correctly. Here's what I did:
I opened the WAV file version of the audio file in Premiere Pro and noted where a hammer hit in the video occurs (01;40;30;28). I then opened Encore 2.0 and imported the video and AC3 version of the WAV file, placed them in a timeline and the audio's hammer hit is right where it's supposed to be (01;40;30;28), but the video's hammer hit occurs at 01;40;43;18.
Next I went into Encore 1.5 and brought in the AC3 audio and video files and placed them on a timeline. I went to 01;40;30;28 in the timeline and the audio and video were both at the frame they should be at that timecode.
Seeing how the video appears to be playing incorrectly, here's some info on my video files:
I have 4 versions of the same film in varying encode rates with the same start and end timecodes. All four files were encoded on a Sonic DVD Creator authoring station using hardware to encode. The files are encoded at the following rates: 2.9 constant bit rate, 3.1 constant bit rate, 3.4 variable bit rate and 4.0 variable bit rate. They are each NTSC with drop frame timecode. All four files play correctly in Encore 1.5 but incorrectly in Encore 2.0.
This almost seems like a drop frame/non-drop frame issue. Do you have any ideas?
Mike

Audio and Video out of Sync after Pro Res export

I´m getting an audio/video sync issue when I´m exporting to Pro Res.
I started off in a HDV1080i50 sequence. Audio sampling rate is 48khz. (16 bit depth)
The sequence is less than 20 minutes long. It plays correctly on the timeline.
When I export the sequence for DVD and view it on a set top it plays absolutely fine.
When I export the video to ProRes (422 HQ - I used Export using Quicktime Conversion) and the audio to AIFF, they quickly go out of sync. This was brought to my attention first by the guys who were making the DigiBeta master, and when I view the exported material in a Pro Res sequence I can see it for myself.
The audio and video clips are of the exact same duration.
Possible issues...
Some of the narration was recorded at 44.1 khz. I didn´t resample it (I´m still a learning novice..).. but if that is the issue should it not have affected the DVD as well? All the other audio in the project is 48khz.
Most of the material is HDV1080i50..but one clip used was originally an NTSC clip and therefore a different frame rate. However I converted it to a 25fps clip and this is reflected in the vid rate column in the browser where it says 25fps.
Final point, the exported AIFF files..when I import them back into the HDV1080i50 sequence and play back, it is perfectly in sync.
Any help would be greatly appreciated.

First, yes resample the narration to 48k 16 bit. You will probably be able to reconnect to the resampled files. Usually works for me. That's a simple fix and will probably solve the problem. If it doesn't, you can try to change the codec (compressor) in the sequence settings to prores 422HQ, fully render and see if that solves the problem.
Wait, just reread your original post. Export from fcp using file: export: quicktime movie NOT quicktime conversion with current settings. If that works without synch issues, use compressor to convert to prores.

Audio and video out of sync when using quicktime conversion

hello,
i am editing a hdv project and want to export to quicktime. the client needs it in a specific size (700x394). they do not want the video in the file compressed, just the size of image. they are compressing the video through flash for the web. anyways, i used to just use quicktime conversion, custom size and use 700x394, but now when i do that the audio and video are sparadically out of sync in the product. the wierd thing is that the project plays fine in the timeline, but when i export the problem occours. i then, exported to a full res fcp movie and it is fine. then tired reexporting through qt pro to 700x394. when i did this their were no sync issues but the quality of the file was not so good, it look more pixely, certainly not as good as when i did it using quicktime conversion.
how can i export through fcp to get the 700x394 file? someone said 'use current settings' instead of using quicktime conversion? how do i do this? what do i need to do and what are my settings?
any help is appreciated. thanks a ton in advance.
cheers,
clay

What format are you converting the HDV to?
If it's animation, it is quite possible your computer can't pull the data rate. In this case it would be a processor / hard drive issue not an out of sync issue.
x

Audio and Video out of sync in PPCS6.0.3

I imported a video clip into Adobe Premiere Pro CS 6.0.3.   I noticed that the video and audio are out of sync.   I played the video file through Windows Media Player and the audio/video are in sync.
However at 8min42sec, I noticed that the video becomes garbled but the audio track is fine.   The entire video clip is about 10min24sec.
I would like to trim the video file at the 8min42sec.   However everytime, I import it into Adobe Premiere, the audio and video are out of sync.   I wonder if Premiere is trying to stretch the video track to compensate.    Is there a way to import the video clip without having Adobe Premiere manipulating it.   Any suggestions are appreciated. Thanks

1st... More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
2nd... What are you editing, and does your sequence match your video?
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341
When your project sequence is correct, you will not see a red line over your timeline at first import, before you do anything to the video
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Audio and Video out of sync during editing. PLEASE HELP

I am using a MacBook Pro. Specs are:
- OS X version 10.9.2
- 2.5GHz Intel Core i5 Processor
- 4GB 1600MHz DDR3 RAM
When I import a video into AfterEffects CC, the audio and video are out of sync. The audio and video files are the right size, length etc. but are way out of sync. By the end of a 2 minute video, it can be out by up to 5-6 seconds. This applies to videos imported from any device. iPhone, USB and even videos I've recorded directly from my computer. Most files I try and import are MP4 files, but I've found the same issues with all other video files. I've even tried importing them separetely as an audio file and then as a video file. Nothing seems to work. I am also experienceing the same issue with Premiere CC.
Please help. I am needing these programs to work for assessment items.
- Andrew

Without knowing the specs of your videos it is hard to say. I'm also running a Mac and am having no such issues.
My first thought is that you have something from a 3rd party installed that is causing conflicts. If all else fails try transcoding your mp4 files to a frame based codec using the Adobe Media Encoder. Pick one of the Apple production codecs or Jpeg compressed QuickTime.
Are you running a ram preview? Did you render your Premiere timeline? Are you new to AE?

Audio and video out of sync on converted AVI file

I am trying to convert a DVD to an AVI for playback on a device. When I import the DVD and publish it as an .AVI the output audio and video are out of sync. After about an hour of playback the audio lags the video by a full second. How can I correct this problem?

Walter0325
If you have Premiere Elements 12 on Windows 8 and you want to rip VOBs from the DVD-VIDEO to export subsequently to DV AVI, here are the details....
1. Do you have DVD-VIDEO standard or widescreen? Set the Premiere Elements 12 project preset manually.
File Menu/New/Project. Set the project preset to NTSC or PAL DV Standard or NTSC or PAL DV Widescreen depending on what you have.
Before you exit the new project dialog, make sure that you have a check mark next to Force Selected Project Setting on this Project.
2. In the Premiere Elements workspace, use Add Media/DVD camera or computer drive/Video Importer to get the VOBs (only the ones in the series VTS_01_1.VOB. Set to a folder in the Save In: location. Check mark next to Insert in Timeline. Hit Get Media.
3. If you have an orange line OVER the Timeline content, press the Enter key to get the best possible preview of what you have on that Timeline.
If after all that, the audio is out of sync, then use the Command Prompt method to get the individual VOBs into a single file with all the VOBs seamlessly merged. This worked nicely for a recent user here. See details in my blog post how to for the Command Prompt way.
http://www.atr935.blogspot.com/2013/09/pe-dvd-videoseamless-vob-ripping.html
Please do not hesitate to ask if you need clarification on anything that I have written.
Depending on your results, more information may be requested about the specific properties of what you have on that DVD disc.
Thank you.
ATR

Print to Video out of sync

More PTV problems.
Ok, I've gotten the video and audio to appear on the deck, and record, but the video and audio are wildly out of sync, maybe at least a few seconds.

Well, I found the answer to this question from help at (credit where credit is due) Ken Stone's excellent FCP Discussion, and at lafcpug's great Café LA, where they've apparently been specializing in HDV work lately.
So here's the solution -- well, at least to the sync issue. The connectivity issue still has me scratching my head
Derek at lafcpug suggested that I shouldn't be doing a PTV directly from the timeline, but rather export full quality video first, and then PTV that from a new project.
Well, that didn't solve the issue, but led to the solving of it -- not to mention teaching me a good technique for doing a PTV.
The solution turned out to be under A/V Settings-->A/V Devices. I decided when running Derek's test, using the exported QT file, to turn off the "Mirror video on desktop" option. Voila -- perfect sync at the deck.
I decided to test whether it was the QT export or the mirror option which had fixed the sync issue by going back to the original cut sequence in the timeline and doing the PTV directly from there. Again, it worked.
It looks like my machine just can't handle doing both. I wonder if any others out there can try to reproduce the issue?
All My Best,
Jeffrey

Video out of sync in timeline

Similar Messages

Maybe you are looking for