Video out put

Ok you final cut pro PRO's I have a 30 min project I have done, burn it to DVD looks great, made a copy to mini DV looks great also. Now I need to make a copy to a broadcast BETA tape. The problem when I make the copy I have a small black outline all around the screen, any one knows the correct setting to make a Television full screen copy of my Doc.

As you have probably figured out, FCP in its standard configuration only outputs DV over firewire. To send analoge or digital signals of formats other than DV, you need an add on component to your system.
<a href="http://www.blackmagic-design.com/products/>Blackmagic</a> and <a href="http://www.aja.com/>AJA both make PCI cards as well as firewire driven boxes that do the conversion/linking to other formats.
good luck.
x

Similar Messages

  • Why is there no video out put from my mini display port ?

    Why is there no video out put from my mini display port ?

    Hi Ben,
    Welcome to Apple Support Communities. 
    Take a look at the article linked below, it provides a lot of great information and troubleshooting tips that can help you resolve the video issue with the external display that’s connected to your iMac.
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    Cheers,
    -Jason

  • Video out put not a valid format

    Hi
    I am having a problem with iMovie when i go to share my finnished products.
    It works fine when i export to DVD, but when i select to share as a full quality movie, iMovie creates the video file but when i try to run it i get an error saying Error opeining movie movie could not be opened.
    Any one else had this problem?

    Quite a few of us have got into a tangle since the FCP X 10.1.2 updTE
    READ HERE:
                     Blu-Ray burning error after Final Cut Pro 10.1.2 update.            
    Some tricks work and some not.
    Al

  • Video out on ipod 160 classic

    I was looking into buy a classic ipod but dosen't the video out put only work through the bottom of the ipod and i heard on the video cable to the new ipod instead of the cable having a yellow end it has a blue end for video my tv's only have a yellow hole white and red hole will the new ipod work with my tv then i only want the ipod if i can do video output
    thanks

    You are correct in thinking that the Classic does not output video signals through the headphone output.
    Check out the cables you need to connect to a TV here.
    http://support.apple.com/kb/HT1454?viewlocale=en_US

  • Video out in 64 bit mood

    hi  guys,anybody has a solution to let logic give me a video out put through my decklink HD video card?
    thanks

    sorry i forgot to mention that im using logic on 64 bit mood.

  • Macbook Pro DVI and Video Out woes..

    Hey, this seems to be a known issue although specifics are difficult to nail down. I've had my macbook pro since shortly after they were launched and been using the DVI - S-video adapter since day one, and it's been outputting to all TVs with no problem.
    I recently got a nice overtime payment from work and decided to treat myself to an external 24" display, was very pleased with it when it arrived. Plugged it in downstairs, and ran it for a few hours, putting it through its paces - worked great.
    Decided to move the whole arrangement upstairs and 'no input signal' said the monitor, the MBP just didn't detect anything in the displays. The built-in display did it's blue screen when the cable was plugged in, so it's definitely detecting something.. The monitor is connected via a DVI-D single-link cable. I've confirmed that both cable and monitor work using a different computer.
    So after this happened, I decided to try plugging it into a TV again to see if the S-video out worked and although Displays picks up the TV and everything is as usual, nothing is shown on the screen.
    Any suggestions would be very welcome before I get my hammer and remodel my computer!
    Anyone else suffering from something similar to this?
    The monitor is a 24" Yuraku YV24WBH1.
    Cheers.
    PS I've tried booting from the install CD, two versions of XP bootcamp (one with standard drivers, one with Catalyst, and the computer's old HD with 10.4 installed on it - no joy with any)

    Another update, I did some research and it seems that ATI are cagily admitting to the fact that there might be a problem with the X-series;
    http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questio nID=26586
    http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questio nID=21266
    http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questio nID=25682
    You'll notice that ATI tell you to contact the manufacturer of your computer if the graphics are integrated into the motherboard. Like with Apple. Much joy to be had there.
    I phoned their technical support and got talking with a specialist who was mystified and suggested 'turning off the airport'.
    Also, it seems that Apple rather significantly "underclocked" the GPUs in their macbook pros;
    http://www.reghardware.co.uk/2006/04/19/applemacbook_pro_gpuspeed/
    http://www.maconintel.com/news.php?article=178
    http://forums.macrumors.com/showthread.php?t=306024
    http://forums.macrumors.com/showthread.php?t=194647
    Could be running the GPUs are running on a lower voltage and maybe they're not working right, or the signal isn't stable enough to pick up an EDID? It seems to be quite a mystery. Perhaps the osx86 community will have some tricks up their sleaves for twisting the x1600's arm. Still doesn't explain why the monitor worked that one time.
    This probably isn't an issue for anyone who doesn't want to plug their laptop into an external display, but I suspect it's a widespread problem just waiting to rear its ugly head, especially as HDTVs become more ubiquitous.
    Anyone else struggling with external display devices, or with solutions, I'd appreciate your input.

  • 3rd generation iPod Touch and Video Out - "whoops!!!"

    Before I jump to any conclusions about Apple, here is my experience with the Video out operation of my brand new 3rd generation 64 GB iPod Touch. This is my third iPod and about a year ago I decided (at great personal expense) to purchase the Apple Composite AV Cable (despite the fact that you can buy copies of the cable on eBay for 1/10th the price). When I plugged this cable into my new iPod touch, the Video Out option was greyed out. I tried lots of different things but eventually gave up and went to the Apple Store to see what it said about compatability. Sure enough, the 3rd Generation Touch is the ONLY iPod, iPhone etc not mentioned. I call my friendly apple support person who says "*of course it will work, I am 100% sure*". I then jokingly asked if he would give me $1000 if he was wrong and begrudgingly he put me on hold "just to check". 15 minutes later (unusual for Apple) he came back to me saying that *I "might" be right but he was 100% sure that if I connected my cable via a Universal Dock it would work.*
    Now, before I go out and spend any more money on a Universal Dock, has anybody tried this? Why would apple make the change ONLY to the 3rd Gen iPod touch?
    I have noticed that there is one nasty non-apple cable on the market that claims it will work BUT it doesn't have the ability to charge...... besides I ONLY buy legit Apple products.
    Any comments?

    Wow Apple pulled tha last post almost as quick as it was written.
    I have been in the IT industry for 18 years, when I started out I read the Mac bible and got a job supporting 1000 macs (remember the wonderful days of the symbol of the little bomb and all you could do is re-install the OS - what a joke). We ditched the Mac due to limited application support (nothing has changed much has it). I did not look at another apple product for 15 years, got a Touch for free ( CC points) Firmware 2.2, loved the little bugger, had a whole new respect for Apple. Happily got 2 cables from eBay for $5.00 for both, video to the tv, charging, audio, best of all worlds. Then, I upgrade to version 3.01 for $5.00, what a deal, copy paste, etc. till I plug in my cables and nothing works anymore. Take it to the car for my FM receiver,. only mono now. Oh sorry you now have to dish out $50.00 for our cables (the /B version not the /A cause we even screwed our customers that bought our own cables) and oh ya you can only buy over priced FM receiver products that pay bloated license fees to Apple. Then we come to your story, you buy "Only Apple products" which do not work (check for the /A model of the cable, you need the /B (/B= Buy again?? Maybe) and then the support guy tells your to go out and spend yet another $50.00 on a universal dock and you are asking if you should do it. Sure spend another $50.00 for the chip enabled dock, it will work, hmm, I think I have put together a pc for less than $100.00

  • Video out stopped working with 10.4.6 update

    Hi, i've just installed the 10.4.6 update and now i have no video out.
    i have a video connected to the adc to s vhs connector. now when i start up my monitor starts up as the second display, and i have to put my computer to sleep and then wake it up and the monitor is reset to the main display.
    is there anyway i can reset something, cause it seems like it's remember previous settings or something.
    HELP!
    if i disconnect the adc to s vhs adapter then it is all fine.

    7 hours later and i finally get it working again.
    i have no idea why this happened, but somehow the menu bar got switched to the tv display. at the same time as this my video stopped working properly. so that was half the problem.
    then it took ages to reconfigure switch res, but i finally did it.
    for some reason my g5 doesn't want to know about using a tv as a 2nd display, until......UNTIL!!!! you rotate the display in the display preference by 90 degrees. then all of a sudden it comes on, and you can rotate it back to normal.
    why oh why this happens only apple knows. it's like a secret door into the wonderful world of dual displays.
    sort it out apple.

  • Video out to tape woes

    Now I have an HD TV I thought I'd try to output finished sequences back to the camera, to play on the TV via HDMI. But I can't get FCE (3.5.1) to write correctly to the camera, a Sony FX7E. Print to video just puts the colour bars and countdown onto tape, but no material, and playback of the timeline doesn't get to the camera either.
    My easy setup is HDV-Apple Intermediate Codec 1080i50, but the details in the easy setup dialogue state Playback Output Video:None. View/Video Out has these options:
    Canvas Playback - ticked, and three different digital cinema desktop options, all greyed out.
    So, help please - how can I write back out to tape? Indeed, CAN I?
    Thanks in advance,
    Alan
    Message was edited by: AtlanticView - after alt/F12 the three digital cinema desktop options are no longer greyed out.
    Message was edited by: AtlanticView

    Right now:
    Having booted:
    alan/library/preferences: NO com.apple.finalcutexpress.plist
    HD/library/preferences: YES com.apple.regfinalcutexpress.plist
    alan/library/preferences/final cut express user data:
    file: final cut express 3.5 prefs.fcset
    file: final cut express obj cache.fcmch
    file: final cut express prof cache.fcpch
    The last 2 were recreated when I reopened FCE last.
    I have never touched the fcset file, but its date and time = last time I opened FCE
    Now: I have just deleted fcmch and fcpch and opened FCE: yep, there are my favourites, and there are my rabbits hopping about!
    The three files mentioned just up there ^ are now dated and timed to NOW.
    Is there a ghost in my Mac? It looks like there is yes way the application can do this!! Reinstall?
    Alan
    (All capital letters ignored in folders/file names)

  • Video out to monitor acting goofey!

    Hi
    I have the Canopus ADVC-100. FW from MBP and FCE to the ADVC, composit to my TV monitor. Went to Video Out-Refresh Video devices, then checked the NTSC.
    Yesterday it was working perfectly. Today the video shows on the monitor but when I hit the JKL keys, the video doesn't move. Just sits there until I hit the K (stop), then the picture jumps to where the timline playhead is.
    A week ago it worked perfectly, then this freezing started again. 1 day good, 2 days later bad! I'm at my wit's end.
    This really all started when I had my external LaCie HD in the FW800 port and the Monitor in the FW400 port. My eSATA cable and PciE card kept unplugging from the MBP so that's when I put the LaCie into the FW800 port.
    Then I noticed that when 2 items were plugged into both of the FW (400/800) ports the FW 400 wouldn't work. Could it be a problem with the controller card in the laptop? That's when I put the LaCie back onto the eSATA, and that's when the monitor strted working right again. But now it's back to it's old tricks
    I don't know what else to do and I need that monitor. I tested the Canopus box by plugging it back into my HP and running video out from Vegas. It works fine.
    Anything else I can do here?
    Allen

    Hi Martin
    Thank you very much. What good is it if you have a FW400 and FW800 and you can only use 1 at a time? That sort of negates even using a FW hub if there is such a thing. Or possibly daisy chaining HD's? Is the Mac Pro any different from the MBP? I have 2 FW HD's and need to transfer files between them. My LaCie and a small portable HD. How's that gonna happen if I can't use both FW ports? Yes, right now I got the LaCie on the eSATA port though but let's assume I need to use both the FW ports! My God! Even my PC's don't work this way. And I want to switch to all MAC's? Hmmmm.
    Secondly, after I posted the original message, I happened to re-size my canvas window by making the browser and viewer smaller and as soon as I resized the window the darn thing started workiing! I don't believe this. I'm not shutting anything down tonight! H9nestly! I didn't do anything else except resizing the Canvas window!
    As far as your instructions, I believe I mentioned above that the MBP does see the ADVC. There was a frozen still on the TV monitor. It just didn't move until I stopped the timline from playing. Then the TV picture jumped to where the playhead was. I wasn't getting video, just stills.
    Now it's working so I'm wondering if there isn't something not right with my MBP? I have the extended Apple Care but I need to get this project done. Another bit of info is that the timeline contains 11 hours of video! But the LaCie on the eSATA seems to be keeping up. All the video files are on the LaCie scratch disk. In other words I can play the timeline just fine. Now we started creating separate sequences for different parts of the video for ease in editing the sections.
    Well, tha's all the info I can give you. this is really wierd!
    Allen

  • Video out to external monitor

    I have a 30 pin to RCA cable for I phone 4s. But can only get sound to the player.  Any reason it will not show video?  All oss up to date.  We are driving on a long trip and wanted to stream Netflix to a DVD player with inputs.
    Thx

    You could get a Canopus box and put the video out firewire to a video monitor that composite video in.
    To do this the video needs to be a DV stream.
    If the video is the new hi def standard with a framerate of 23.97, you will see picture but it won't be frame accurate sync.
    If you have a G5 or a Mac Pro you could get another video card and display the video on that.

  • Video out on Ze

    First I wanted to say hi to everyone. HI ?Second, I want to say I have owned a Creative Vision M since it came out. I loved everything about it and never really had any problems whatsoever. Sad thing is, it was stolen from the gym 3 weeks ago. I feel completely lost without it. Used to use it everday at work to break up the day. So here's the deal. I have read numerous numerous forums thread regaurding the zen. I see alot of people frustrated about different problems they're having. Since I have had good success in the past with Creative (never had to deal with their CS!), i have decided to purchase the 32gb. I am comfortable, for my purposes, that this player should suit me fine. My only question is, I know that it doesnt have video out, but is that a hardware or software thing? Could they add it later in a firmware? Just wondering.
    Loved that feature!!? Used to put DVD's my girl didnt have on it, and go over and watch them on her tv. NIce and easy, no dvd's to carry, just my trusty player. Not a make or break, but would be nice. Thanks in advance?Jeep

    No, I doubt it. I don't think they designed the headphone jack to work that way. The reason they didn't enable that, IMO, is you have to use 320x240 videos on the Zen, this would look horrible on a screen any larger than 2.5".

  • Video Out on iPhone 4 and iOS 6

    To watch downloaded video, I connect my iPhone 4 to my TV using an AV dock-to-component cable. Since installing iOS 6, my iPhone says it "does not support that accessory." I knew of the video out issues with iPhone 5 but didn't read anywhere that it would break functioning video on an iPhone 4. You could call me a very unhapppy camper.
    Does anyone have a solution or a workaround?

    I am having some crazy issues over the last couple days and I live in SF Bay area too. On AT&T not Verizon. Updated to ios6 almost a month ago and didnt start having issue until Thursday
    First I'm stuck in a call, can't end or go to screen that shows the keypad or put on speaker; nothing.
    2.Then on Fri no badge on SMS app and all new and old texts gone.
    3. Can't even start new sms from icon in top right nor from send message button in each contact
    Does any of this sound familiar?

  • I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then the AV cable - no sound. AV first, then earphone - sound. Anyone know why?

    I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then plug in the AV cable - no sound. AV first, then earphone - sound. Anyone know why?

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • I have a 5th gen that won't display any video out

    I have a 5th gen that won't display any video out. I've tried 2 different splitter cables out of the earphone jack. I've tried plugging the RCA cables into different colors on the tv. Thought it was just a problem with the cables until tonight when I got a Sonic Impact V55. Video won't display on it either. I have the TV setting to ask. After it asks and I say yes, I get a picture of an Ipod cable connector and a message saying: TV OUT
    ENABLED Please Connect Video Accessory.
    This message happens on both splitter cables and using the dock connection on the V55. I've restored, reset, nothing has helped.
    I did see a couple of posts regarding the V55 and whether the 5th gen would work on it. Does anyone have a v55 that the ipods working with? Heck the box says it works with Ipod 5th gen.

    Playercoca wrote:
    The video out on an iPod does not go trough the earphonesjack.
    It goes trough the place where you put youre dock conector in (on the bottom)
    Yes it does, on the 5th generation (pre-Classic) models, the video does indeed feed out the headphone jack (as well as out the dock connector on the bottom).
    Patrick

Maybe you are looking for