Video out settings HDMI and Component out run at the same time?

Does anyone know if I can get video out of both the HDMI port and component video connections at the same time. Trying to distribute video throught the house on component, and still get HD on the flat panel in the living room. Any help would be greatly appreciated.

Apple says when both HDMI and component are connected, HDMI will take precedence over component. Short answer: no.

Similar Messages

  • Can a vodcast and a photocast run at the same time ?.

    Hi,
    I would like have a video podcast play and a photocast run at the same time is this feasible?
    Geoff

    Since they're different apps and there's no way to sync something like that: no. Sounds like you could just do a video slideshow to me. That's supported by all major video creation apps.
    -S

  • Okay to have Ethernet and Wi-Fi running at the same time ?

    Hi,
    I've always been careful to turn off Airport before I switch to Ethernet.
    I was just wondering if it is okay to have both options running at the same ime and what consequences it may have.
    Thank you for reading this

    Coitus Interruptus wrote:
    +"Will the Mac use part of both simultaneously?"+the Internet and E-Mail.
    Hi,
    every IP based connection has a gateway that tells a device where to send packages that belong to the subnet the connection is in.
    Then there is a (one, and only one!) default gateway that tells the device where to send all packages that belong to no subnet of any connection. On OSX this is normally bound to the primary network device (the one that is on first place in the network configuration).
    So there is no problem having more than one network connection open. In your case, though, the WiFi connection would probably be in the same subnet as the wired connection. This doesn't pose a problem per se, but just is a bit senseless. It doesn't have an impact on networking, though.
    My sister suggested it. She knows Latin. It means "handsome boy", doesn't it ?
    In what reality?
    C.

  • Can B1 2005 and 2007 be run at the same time?

    I want to install B1 2007 on my server to make sure that everything runs over smoothly, then when I'm satisfied with the results, I'll just upgrade my workstations and hopefully have a seamless transition.  Are there any errors that will pop up if I install 2007 at the same time as 2005?  I have to make sure that there isn't a work outage.

    Derek,
    if you mean both version to sql server, the answer is yes, you can. If you mean to install the aplication, the answer is no, you cannot. If you want to test new version, youll have to use new computer or some virtual PC.
    Petr

  • Forms 6i and Forms 9i Running at the same time

    I was wondering if it is possible to run the Forms 6i developer suite and the Forms 9i developers suite at the same time and database environment.

    Oracle9iAS Release 2 = Oracle9i Forms and you can only run 9i Forms in this stack.
    Oracle9iAS Release 1 - Oracle Forms6i and you can only run 6i Forms on this stack.
    You should "mix and match" version of Forms. You should run the version of Forms on the same platform version.
    Of course, you can upgrade your 6i Forms to 9i which means they will now only run on Oracle9iAS Release 2.
    I know its a little bit confusing but we are slowly getting all our release numbers aligned to make it easier for you.
    Regards
    Grant Ronald
    Forms Product Management

  • Can I stream video to apple tv and sound to airtunes at the same time?

    Does anyone know whether I can stream video to apple tv and sound to airtunes (airport express) at the same time? I am trying to build a setup where I watch the video via a projector (connected to ATV) and get sound from my hi-fi system which sits on the opposite side of the room.
    Has anyone tried that? Would it work?
    Thanks!

    Not controlling things from AppleTV 2
    AppleTV 1 used to be able to output its audio to an Express AppleTV cannot.
    Maybe using Airplay from itunes/idevice.

  • Can PSE 6 and PSE 8 Run at the Same Time?

    I have Windows 7 and recently upgraded to PSE 8 and have had problems with Photo Mail and email attachments. I did not have email attachment problems with PSE 6 so I wonder if I can run both 6 and 8. Will there be a catalog problem? When I loaded PSE 8 the first time the catalog needed to be converted. Will this make it unstable for PSE 6?

    As requested.

  • Mainstage 2 and Kontakt 5 running at the same time?

    I use MainStage 2 and Lion running on my MacBook Pro 2.3 i5 8GB Ram. When I use only Kontakt 5 latency is low, but when I in addition start up MainStage 2 I get pops and crackles. Can not Kontakt 5 and Mainstage 2 run side by side? Is this normal?

    I just think its kinda funny, since I use MainStage ONLY for changing patches on my three synths - no softsynth at all, and use Kontakt 5 mostly for playing one Rhodes sound, sometimes I layer two sounds at once. The CPU is not very high, just seem like Kontakt and MainStage will not work well together. Mayby using a SSD for the samples would help ...
    (Sorry. By mistake I pressed the "Correct answer" on my reply )
    Message was edited by: HowardPain

  • How do I get the Time Capsule to run both 5GHz and 2.4GHz networks at the same time.

    How do I get the Time Capsule to run both 5GHz and 2.4GHz networks at the same time.

    Thanks for digging out the facts.
    You have a 1st Generation Time Capsule.
    Your model can produce two bands....either 2.4 GHz or 5 GHz....but not both simultaneously.
    You would need a Generation 2, 3 or 4 Time Capsule for simultaneous dual band capability.

  • Multiple Libraries for Video running at the same time on one PC

    Hi Everyone -
    I want to clarify this is for VIDEO files, not music for my 6 ATV's on the network.
    Problem: I have well over 1000 VIDEOS in my iTunes Library, and I am wanting to have multiple libraries availible at the same time; not just whichever the computer has open.
    We have several atv's on the network and I would like to take my video organization one step further; instead of scrolling forever in the atv menus for the video you want; I could make several libraries all availible at the same time. 
    Such as:
    Kids Library
    Workout Library
    Parents Library
    etc
    This in turn would shrink the primary library and have less videos to sort by.  I know how to create the Libraries, I just dont know how to have them all running at the same time.
    Infastructure:
    Windows 7 Ultimate with Drobo B800FS (16TB of storage) all connected to Cisco 3660 Gig switch with multiple atv's hardwired back.

    iTunes can only open one library at a time. If you have multiple computers, or virtual machines, each could be serving a different library.
    tt2

  • Labview runs CANBus and DNP3 software model at the same time

    I have an ordinary computer which communicates with several DSPs (CANBus communiation) through Compact Rio. The physical connection is that the DSPs' CANBuses are connected together and connected into Compact Rio, then the Compact Rio is connected with a router through Ethernet, at the same time, the computer also connects with the Router through Ethernet. Based on this physical architecture, the computer can run CANBus software model on Labview to communiate with Compact Rio and DSPs.
    As I know, the communication between the computer and the Compact Rio is not real time, and the communication between Compact Rio and DSPs can be real time, can you tell me if I get the right point?
    Now we have another device named RTDS (communicate with outside through Enternet based on DNP3), and want to add RTDS into our system. I am not sure about the way to conduct the communiation. The main question is that we need to run Labview to communicate with DSPs through CANBus and RTDS through DNP3 at the same time, is that possible?
    I proposed two possible ways to conduct communication, bt not sure if it is possible.
    1. I proposed that I connect RTDS with the Router through Ethernet, and then the computer communicates with RTDS through the Router based on DNP3 and also keeps the communication with DSPs through Router, Compact Rio, CANBus and then DSPs. I am wondering if this kind of communication is available for Labview.
    2. The second possible way I proposed is that I connect the RTDS with Compat Rio (CRio keeps connecting with DSPs through CANBus) through Ethernet, and then the computer communicates with DSPs through Router, Compact Rio and CANBus, and the computer communicates with RTDS through Router, Compact Rio and Ethernet. Also, the computer needs to run Labview with CANBus sofeware model and DNP3 software model at the same time. I am also not sure if it is possible.
    The diagram of the communication system is shown in the attachments.
    Attachments:
    Commnucation system diagram.pdf ‏118 KB

    To use Mail from multiple devices, your Mail Server needs to be using IMAP protocol (iCloud Mail uses that).
    IMAP keeps the Master copies on the Server, not on the Mac the way most default POP Mail servers do.
    To keep one Master Calendar, accessible from all devices, you need a web-accessible place to keep the Master Calendar. iCloud can do that.
    ¿Do you see a trend developing here?

  • Dreamweaver and Fireworks won't run at the same time

    Recently, I've run into a problem where I cannot run Dreamweaver and Fireworks at the same time.
    I have Dreamweaver CS4 & Fireworks CS4, which I can still run at the same time.
    However when I run Dreamweaver CS5.5 and try to launch Fireworks CS5.1 I get a C++ Runtime error in FW CS5.1.
    And when I run Dreamweaver CS6 and try to launch Fireworks CS6, Fireworks CS6 freezes before fully loading.
    If I run DW CS6 and launch FW CS4, I can get them both to run together, but when I close FW4, DW CS6 crashes.
    Any suggestions would most appreciated.
    David

    Historically, I've always kept prior versions installed because sometimes, albeit infrequently, I need to access extensions that aren't compatible with the newer versions of CS. Since I can run DW & Fireworks CS4 together, I'm inclined to leave them installed.
    I've thought about uninstalling CS 5, but I don't think that would resolved my issue. I've already tried most of what's in the Adobe troubleshooting suggestions save for creating a new administrator account.
    I think I'll hobble along with my current workarounds since I'll be migrating to a new computer very soon, which should acomplish what creating a new administrator account would. I'll probably limit the reinstall to CS 6 to eliminate any issues that might be related to having multiple versions installed, which in reality shouldn't be an issue because again, I've always done that successfully in the past.
    Thanks for the suggestion just the same.

  • Getting 'Paint' and 'Sales History' to run at the same time

    Hi,
    Is this a matter of setting up a port for Paint and another for SH? Is there a limit to the number of OBI repositories that can be running at the same time?
    Thanks!

    Thanks.
    Can two or more repositories exist in the same rpd file? Can Paint and SH be in the same rpd file and be used by seperate groups that access completely different data sources?
    In our case, the dimensions and facts for glass used in a car are very different from the dimensions and facts for a car's transmission. There are similarities, true, but they are still very different.
    So, in one rdp file can there be seperate presentation folders for Glass, Tires, Transmissions, Seats, Axil, Engine, Steering Wheels, Head Lights, and etc...
    Each presentation folder would be used by different people. Each presentation folder would access different tables. The Glass Parts business will use the Glass presentation folder, the Axil Parts Guys will only use the Axil Presentation Folder, etc..
    As always, thanks!

  • I have a mac book pro i7 2.00Ghz and 4Gb RAM. I want to run at the same time Omnisphere,Trilian and BFD 2. Will it work fine? Anybody that has some experience? Thanks

    I have a mac book pro i7 2.00Ghz and 4Gb RAM. I want to run at the same time Omnisphere,Trilian and BFD 2. Will it work fine? Anybody that has some experience? Thanks

    Well this is not a problem I have already bought one, my great worry is the processor and the memory..

  • HT204370 why does my video and sounds not play at the same time when watching movies

    why does my video and sounds not play at the same time when watching movies

    Welcome to the unity.
    Upon which device are you watching your movies and are you using a home theatre system for your audio.

Maybe you are looking for