Video Out - Tecra 8000

I have a Tecra 8000 with Windows XP Pro installed.
Everything works beautifully I have updated the BIOS to v9.3 - BUT I can't get the video out connections to work.
I have tried the RCA plug on the back, and also connected the SVGA dongle to the side jack and used the composite video out on that, but no signal seems to come out of either of them.
I have tinkered with the various different BIOS settings, used the Fn+F5 key all to no avail.
I have read in the forum here that others have the same problem, so I'm adding a plea for help with this one too. Can I ask, has ANYONE managed to actually get a composite video signal out of their Tecra?

Hi Peter
If your Tecra is preinstalled with Toshiba Recovery CD all drivers and tools should work properly. In this case there are, in my opinion, two possible reasons why this not works. Either is notebook the cause for this issue or there is some problem with the TV and TV setting.
Using FN+F5 key combination you can switch to external device. It will be interesting to know if this works properly with external monitor. It is not the same port but the tool is the same. You can also try to connect your notebook to another TV. It is sometimes not easy to say what the problem can be. If there is no way to have some success you need some professional help. Maybe the service partner can make a short check of composite video out port.

Similar Messages

Tecra 8000 composite video out

I am trying to direct video output from my tecra 8000 via the yellow video composite jack at the back of the unit. I thought it was as simple as pluging in both sides of an RCA jack (one end to the video input of a VCR and the other end into the Tecra video jack).
I get NOTHING on the screen. What am I doing wrong?
Thanks in advance

I had already tried that with no results. There is also a 7 pin canon connector on the side of the laptop. This was provided with units that came with a DVD-ROM. Normally there would be a modem port there. I believe this round connector is for "S-Video" output. I was going to buy a cable for this, but like the composite video output, I'm afraid there is no video signal going to either port. The manual just talks about the port on the back of the unit and it doesn't say anything other than placing an RCA cable between it and a TV or VCR that has the same input port. It's really neither here nor there if I can get this to work, I'm just a little stumped is all.

Tecra 8000 TV out when docked

The docking station for the Tecra8000 doen't replicate the TVout connector, but I have a right-angled cable that fits the normal TV out port when docked and allows the cable to clear the docking unit. Is the TV Out connector normally disabled when docked, and is there a registry setting or something in 98SE to re-enable it?
I connect my Tecra to a TV set to watch DivX movies on the large screen, with the audio out going to my stereo, but I need to use the unit with the replicator because the server containing my video files is on a network, so I need the network capability. I COULD use a PCMCIA network adapter, but then that defeats the object of a docking station with the LAN!!

Hi Retro
I am a little bit confused. As far as I know some Tecra 8000 have no LAN card. If your unit has LAN card and LAN port why you dont connect the unit directly on TV and LAN without Port Replicator?
I am not 100% sure if the port is disabled but you can test it if you can. If there is no success you must use PCMCIA network adapter.
Bye

Tecra 8000: No memory area available to communicate with PC Card

I have a Tecra 8000 running Win98 SE and use a 3Com PCMCIA Card for my Internet Connection. I was troubleshooting my computer on another issue and in the process disabled the PCMCIA Toshiba ToPIC Cardbus Controllers. After enabling these again I am no longer able to communicate with the PC Card and therfore cannot connect to the Internet.
PC Card Troubleshooting Agent states: 'Windows is not able to identify or use the inserted PC Card Device because there is no memory area available to communicate with this device. You must make a memory area available before this device can be used. Check your computer's CONFIG.SYS file for a memory manager that is excluding upper memory regions between A000 and FFFF'.
My Cardbus Controllers are set as follows:
1.Memory Range - 0C000000 - 0C000FFF
2.Memory Range - 0C001000 - 0C001FFF
My PC Card (PCMCIA) Properties are as follows:
Card Services Shared Memory:
Start 000C0000
End 00FFFFFF
Length 00001000
Whilst the PC Card Modem is being recognised in the Port it cannot be communicated with and the error message is shown as follows:
'Error 666: The modem is not plugged in or is out of service. Connect a modem to your computer and try again'.
When I run Modem Diagnostics there is no response except for the following:
'Open Comm: Couldn't open port'
Any help or advice will be much appreciated.

Hi Evan, I have had 2 PC cards damaged during bad thunderstorms in the past. Recently i helped someone to set up her Tecra8000 during another thunderstorm her new extension cable blew up silently! At first i didn't suspect it as the cable was brand new (cannot open port etc). Anyway, i tested the cable with a phone n it was dead and then i got a new extension cable for her from Argos the next day n it worked perfectly!
If ur card is broken then i suggest u get a Phonic PC card V.92 from PC World. It's only 14.99 n the connection speed is surprisingly fast 112.5k ! (I used to pay for 50 !) faster than my new fancy laptop, the internal modem can only connect at 44k !
Hope this helps. Let us know.
PS I have since upgraded her laptop from Win98 to XP, it works rather well on the Tecra8000 (so far so good, she even managed to get her new printer working under XP without asking for my help!). if ur laptop meets the requirements, it MIGHT be worth considering upgrading it to XP.
Lisa

Tecra 8000: Missing OS, how to install

I have this old Tecra 8000 and it had Win ME on it. I used some software called Kill Disk, and after reboot I get "OS Missing".
I have a bootable CDR with a (legal) copy of XP Pro on it. But nothing happens when I insert the CD, it runs for a while but the "OS Missing" message remains. I have tried to reboot with the CD inserted, but nothing but the message.
It's and old comp but I still want it to run, there are no mechanical failures, so...any help much appreciated.

First account did not allow me to login, so I made a new account.
Anyway, I can not alter my BIOS since the boot process is only about 1 second. All I have is the Toshiba logo followed by the OS Missing message. I know my way around the settings in the BIOS, boot order and all, but this I dont understand. I do not have a command line or anything, just this annoying message.
If I start the comp while pressing F12, I get a message about how to insert a BIOS Update Diskette.
- So I downloaded the latest BIOS update, copied it to a 1.44 MB floppy and inserted it into an external floppy drive. Well, that did not work out, probably some USB error?
- I tried to burn the update files to a CDR, start the comp while pressing F12, inserting the CD on message, but no response either :(
Any other suggestions on how to solve this?
Message was edited by: Yavis2

Tecra 8000 screen goes green

I've got a Tecra 8000 running Win2000 with the latest drivers/bios, etc. It runs fine and everything, but has this peculiar problem. When first booting up, the display comes out fine, but then gets a green tint to everything. I can fix this by going into hibernate (or suspend) and turning the machine back on (out of hibernation).
Likewise, if I run an app that changes res and goes to full screen (ie: MAME) the screen will go back to a green tint again, and won't go back to normal unless I hibernate->turn back on. Any ideas?

Hi
Did you try to connect the external monitor?
If not try to connect the external monitor and check if this issue also happens on the second monitor.
If not so I assume there is only something wrong with the display on the notebook but if this issue appears also on the external monitor so there could be a graphic card malfunction or also something wrong on the motherboard.
Unfortunately I don't think that you can solve without any professional help.
You should contact the Toshiba service partner in your country.
Explain him the situation.

Tecra 8000: Question about the Windows XP performance

My Tecra 8000 is just within the Microsoft minimum specification for running Windows XP.
I am concerned that by installing XP the machine will perform badly with XP eating up resources.
I would welcom hearing from others who have experience of putting XP on this or similar spece'd laptop.
PC used for internet/email and general office use - no processor/memory hungry software used.
Paul.
++++++++++++++++++++++++=
Machine Specification:-
Processor: GenuineIntel Family 6 Model 6 366 MHz Stepping 10
Math Support: Present
BIOS: TECRA8000 v9.30 TOSHIBA, 12/31/99
Bus Type: PCI, ISA
Ports: 1 Parallel, 2 Serial
Memory: 256 MB (25% Utilized)
Floppy Disks: 1.44 MB
Hard Disks: 18.63 GB
Multimedia: CD-ROM
Video: 1024 x 768 in True Color, NeoMagic MagicMedia 256 AV Ver. 4.20
< Operating System > Windows: 4.0 (Build 1381)
Net Clients: Microsoft Windows Network

Hi Paul, i'd installed XP Professional for my user n so far so good. Her broadband is also working well too. when this laptop was using Win98, i had to install a driver every time i added some new hardware. Now with XP Pro there is no need, she even managed to install the new printer herself without help. The same goes with the memory stick etc.
i re-built the Tecra 8000 (192 MB RAM) from scratch (XP Pro only, bypassed Win98) so i dont know how well it'd cope with dual OSs. Bear in mind that it's not that "roomy". i just like it super "clean". btw, the installation was much simpler than Win98 (not much to add). One more thing, i don't know how well it'd cope if it had a virus checker on it (might slow down the machine considerably). I just installed Sygate Firewall version of 5.5.2577 (downloaded from http://www.oldversion.com/program.php?n=sygate ) without any virus checker. it's a good Firewall n she's a sensible user (i've warned her all the things not to do etc). u might like to install that firewall (n turn off any unnecessary XP services) too BEFORE u go online.
Lisa (yes it's me again with a new ID :-)

Tecra 8000 - BIOS Update & XP or ME installation?

I've been given the task of sorting out a friends Tecra 8000 laptop which is totally riddled with spyware and viruses. Having killed most of the infections I've backed up what I need to and decided the best course of action is an OS rebuild.
I don't know which OS to suggest he installs. Will ME install and make use of Win98 drivers or is this not advised (I have no experience with ME)?
Would XP be a better choice with its own drivers (have read posts on here that SP2 causes slow-downs though)?
With either of the above OS's will a Bios Update be necessary? If so does the 9.30-trad Bios update require a 500MHz + CPU? Will the Bios tell me the CPU speed?
I have found all info on how to install Bios updates; I'm just checking that I can install the 9.30-trad on a Tecra 8000 with a lower spec processor?
Many thanks,
jbw

I haven't even got that far. I can't update the BIOS as I don't have a floppy drive and I want to do this before I put XP on it. :(
I've tried the 'make a bootable cd in Nero trick' but the tecra 8000 doesn't read it. I hold the F12 key and switch on the machine. It goes to the BIOS update screen and asks to press any key. I press any key and it doesn't do squat with the CD. I've tried various boot sequences but none seem to make any difference.
Perhaps I've made the boot cd wrong? I just extracted the files to the floppy disk - thats what I gathered from the readme. Am I meant to extract the files to temp folder and run an executable to make the boot disk?
Or perhaps Tecra 8000 doesn't work with bootable CD?
Any help most appreciated. :)
ta,
jbw

Video out from ABC app to my TV

I have ABC's app that allows me to watch their shows. It works fine on the iPad, but when I connect an Apple Composite AV cable to my TV all I get is sound. No video. I have my iPad set to video NTSC but I don't get it on my TV. Any ideas out there? Thanks.
donald

Only a few apps right now support the Video Out function... the developer is tasked with making their apps compatible with this...over time more and more will I assume... For now only a few native apps are like the Movies in iPod section or the Keynote App (strangely Pages and Numbers are NOT supporting video out currently)

Video out from iPhone 3GS to TV.

Can I use the standard (3 phono plugs on the end) video out lead I already have to view keynote presentations from my iPhone 3GS on my TV/Projector?

Same problem here.
I can't get any video out of my faithful iPhone 3GS running iOS 6.xx.
I have been browsing Apple discussions for solutions and most of them seem to point out to a faulty Video Composite cable. This is not my case.
I can rule that out 100%.
Old iPhone 3G running ios 3.1.2 works just fine as well as does iPhone 4, with the same cable.
I have tried with a friend's TV and cable and iPhone 3GS and we have identical issues.
(different cables and phones, same issue).
Please note all testing has been done with genuine Apple Video composite cables.
So this points out clearly to a iphone iOS issue combined with hardware.
It appears that starting from iOS > 5.0 video output has been disabled on earlier iPhone models prior to 4.
It would be nice if Apple could issue a Knowledge Base document on the issue as that would save many people further testing and waste of time.
This document http://support.apple.com/kb/HT4108? isn't really complete enough as it stops at iphone 4.
Has anybody the ultimate answer on this issue?
Are there any known work-arounds?
Thanks and regards
Pieter

Mini-Dvi to Video out from Final Cut Pro working

Thanx Everybody for posting reply for my post regarding running video out to external TV from Final Cut Pro in MacBook.
It's working fine.

@ Studio X : The files were originally created with Final Cut Pro, rendered out to QuickTime, then are being played back with Final Cut Pro. The file that has the most noticable studdering is a 60-minute timeline sequence in Final Cut. All files are being stored and played back from the Mac Mini's internal hard drive. Everything was originally shot on DV and formatted for a 4:3 aspect ratio.
@ Shane Ross : Are there any settings in the MacOS or FCP where I can improve the HDMI video signal? Or do you know of / have any experience with Firewire to HDMI converters? Unfortunately, my new signal path relies on HDMI from the video playback.
My current setup uses the Firewire output, which is then converted to composite video & analog audio using a pair of ageing DV tape decks. That setup is becoming troublesome due to age.

MSI GeForce 3 Ti200 video out freezes

Hi!
I was testing the composite video and s-video out connectors. In my properties for the GeForce card i can choose between s-video and composite video, but they aren't automatically discovered as connected when pressing that button.
However when i press apply after choosing composite video, my monitor goes black, but i get no signal to my TV. My computer totally stops responding not even ctrl+alt+del will help. I have to press the reset button.
I downloaded TV-tool which i saw someone mentioned in this forum. It works flawlessly using TV tool using composite video(it takes sometime to switch between the monitor and tv but it works).
So as i understand it MSI's drivers or tool for switching between Monitor/video is broken. I have downloaded the latest drivers and tolls with MSI Live update 3, but it still doesn't work.
I'll be damned if i have to purchase a third party product for something that should work out of the box. I mailed MSI support about this and was directed to this forum, so i wonder if anybody else has this problem and found another solution than TV-tool?
I'm running Windows XP with the latest drivers.
Mats

Judging from the problems I and several other people on the forum have mentioned, there seems to be a problem with the nVidia 45.23 drivers and video. I get a grey screen with vids unless i turn down the hardware accel to almost nothing. Other people can get vid to show on their tv out. So if you havn't tried an older driver version yet, maybe you could use the good old xp driver rollback in the video device properties.

What is the difference between Video-out and mirroring?

What is the difference between Video-out and mirroring? I can't get iPhone 4 video to work on my TV screen
I have just bought an MD098ZM/A (Apple 30-pin Digital AV Adapter). I am struggling to get it to show a picture on my TV. I know I'm doing something right because the audio is coming out of my TV speakers but no picture on the TV screen.
I have used the same HDMI channel (on the TV side) with the same cable and my thunderbolt port (MacBook Air) without any trouble - and on the same app (BBC iPlayer download then full-screen mode).
Now I note that the packaging for the MD098ZM/A says video-out on iPhone 4 but mirroring only on iPhone 4S. I only have an iPhone 4 (not the 4S). Now if the lack of iPhone 4 support for mirroring means that I can't play video material out to my TV, then in what sense is there any video-out capability at all?
There is only safety and warranty paperwork in the Apple adapter packaging - no help information. And I haven't found further guidance online either.
I do note somewhere online that it suggests that basic non-mirroring video-out (for this adapter) only works with some external TV sets. Any way of finding out which? I'm using a Sanyo CE32LD90-B LCD TV if it helps.
So far not doing very well.

Now found these but have had to give up on this adapter!
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
http://support.apple.com/kb/HT4108

Satellite 1800-100: video-out does not work

He,
I just installed windows XP on my old Satellite 1800-100, but now my video-out does not work anymore. So I just downloaded the latest driver, but there's no way I can get it installed. According to Windows the new driver isn't newer, so it won't let me update it. And when i try to unistall the display driver, I have to reboot before it takes effect, and wile rebooting it automaticly installs the standard driver again.
Can anybody help me?
Greets,
Daan

Hi
Do you mean TV- out port or monitor port? As far as I know this unit is preinstalled with WXP Home and all drivers can be also used for WXP Pro.
Did you preinstall your own OS (non recovery image)?

Satellite 1135-S1553 without S-Video Out Port - How to connect TV

I have a laptop Satellite 1135-S1553, how to connect it to TV without having S-Video Out Port in my laptop?

Are you 100% sure that your notebook doesnt support the s-video OUT port?
According to [this page |http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_tourView.jsp?moid=434998&rpn=PS113U&ct=PT&so id=660059] the notebook Sat 1153-S1553 supports this port at the back side.

Video Out - Tecra 8000

Similar Messages

Maybe you are looking for