Video out to external monitor

I have a 30 pin to RCA cable for I phone 4s. But can only get sound to the player. Any reason it will not show video? All oss up to date. We are driving on a long trip and wanted to stream Netflix to a DVD player with inputs.
Thx

You could get a Canopus box and put the video out firewire to a video monitor that composite video in.
To do this the video needs to be a DV stream.
If the video is the new hi def standard with a framerate of 23.97, you will see picture but it won't be frame accurate sync.
If you have a G5 or a Mac Pro you could get another video card and display the video on that.

Similar Messages

Slow Video playback on external monitor

I'm having a problem with video on an external monitor drifting out of sync. The video plays back slow on the monitor but the sound come through fine and the video is playing at a normal speed in FCP. This is only happening with video from FCP, I can play a clip in Color and there's no drift. I've opened the project on another mac and there's no problem. Also, if I set the external video play back to 10 bit the drift is worse than if it is set to 8 bit, as in a 15 sec clip takes 19 secs to play back on the external monitor at 10 bit and 18 secs in 8 bit (not exact times). I've reinstalled AJA LHe control panel and drivers, but seeing as this isn't happening in Color it seems like it must be a FCP issue. I've trashed the FCP prefs (along with AJA and quicktime), what could this be?!?

what video capture card are you using??
have you set render all to FULL, and have you rendered??

Does the mini displayport able to transfer audio and video to an external monitor (example: a tv) using a 2011 13" MacBook Pro with an hdmi cable?

I was wondering this, because I want to hook up my 2011 MacBook Pro to a external monitor (TV) using an hdmi cable. This would be heplful before I buy a mini displayport to hdmi adapter, and then maybe find out that the mini displayport might not transfer audio, only video.

Yes, min Displayport supports audio and video for the 2011 MBP 13" via HDMI.

Video playback on external monitor

I have a problem with video playing on my external monitor.
I have been editing a 30 second commercial with several split screens and quad screens. After my last render, the video no longer plays on the external monitor. A frame plays, and then it freezes. I went thru the "Stock Answers" section and played with the RT settings and the memory/cache settings. Nothing seemed to make a difference. I also opened some older projects and they will not play thru the external monitor either. Finally, another note that may offer some clues is that when you print to tape it sometimes plays perfectly and other times it does not.
Any help provided will be greatly appreciated!
Jeremy

Here is my standard reply:
#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
For all the stock answers, click on this link:
Shane Ross, "Stock Answers", 03:58pm Jan 13, 2005 CDT

Bypass failed PAV (power analog video) to use external monitor?

"Patient" is a 7+ year old iMac DV 400 (CRT; slot-loading). It fails to start up. The LED in the power button lights briefly, it sounds as if the hard drive starts to spin up, and small patches of light appear in the upper and lower corners of the right side of the screen. Prior to this status, the display had been reduced in brightness for a couple of months. The day before it died, the image on the screen started pulsing at the sides and horizontal streaks flashed across the upper third of the image. I shut the machine down for half an hour then restarted and it was back to normal. The next day, the pulsing and lines returned; shut down and tried to restart in 1.5 hours, but no go (symptoms above).
I replaced the 3.6V lithium battery and reset the PMU/CUDA. No change. I am told that the symptoms are characteristic of a failed PAV board. I read in another thread here ( http://discussions.apple.com/thread.jspa?messageID=3110595&#3110595 ) that it may be possible to bypass the failed PAV and connect an internal cable (via an adapter) display (i.e., not using the existing extrnal VGA port). Here is a quote from the above thread (12th reply; "However, for those of us with tray-loaders iMacs that have failed video boards, you can simply disconnect the internal video connector. This connector is essentially a "VGA" cable inside the iMac case, but it uses the old-style Apple video connector. It is a simple matter to buy an Apple-to-VGA adapter and connect it to the internal video output and connect that to a VGA cable leading to an external monitor".
Is this possible with a slot-loading iMac? If so can someone please point me to instructions for doing so (ideally with photos/illustrations), or explain how to do it.
I will be very greatful for any help getting this iMac running again.

thanks for responses
@BurntSushi
here is what scrot gave me: http://dl.dropbox.com/u/292474/arch/output.jpg
but what i see is more like: http://dl.dropbox.com/u/292474/arch/output_view.jpg
@ewaller
interface is VGA. i have tried changing the H. Position on the monitor to "slide it back" but even when it's completely at 100% on one side i gain back half of the black area. i don't know what else i can change on the monitor that would help me out.

DV NTSC Video Playback on external monitor

I can't get my DV NTSC sequence to play on my external monitor. I know I have the computer/Canopus/external monitor connected correctly b/c I can playback some of my old Final Cut Express sequences on the external monitor. I used that as a test to make sure everything was connected properly. Since I can rule that out, I must be missing a setting in FCP somewhere?
Sequence Settings are NTSC-DV; Compressor DV/DVCPro-NTSC
View>Video Playback is set to Apple Firewire NTSC
Can anyone lead me in the right direction? Thanks.

Hi -
Go to the menu VIew > Video Playback and select Apple Firewire (720x480):
!http://www.spotsbeforeyoureyes.com/VideoPB_FW.jpg!
Then go to the menu View > External Video and select All Frames:
!http://www.spotsbeforeyoureyes.com/VideoPBAllFrames.jpg!
If you don't see an image, then go to the menu View > External Video > Refresh A/V Devices, then reselect All frames.
Hope this helps.

What do you need to get video output to external monitor

Hello,
I'm fairly new to Color and have read a few posts that color can't be viewed by firewire to an external monitor. Basically what I have right now for external viewing in FCP is a JVC SR-VS30 Mini DV NTSC deck with firewire connected to my computer. From the deck it goes to a small TV set and a Sony Trinitron PVM color video monitor. What do I need extra to be able to see my color correction in Color on an external monitor. BTW in Color currently the Video Output tab in Setup>User Prefs is grayed out showing Disabled. I suppose that when I get whatever I need to see Color on an external monitor that this tab would NOT be grayed out or would I have to set some other settings.
Thanks.

Well, you can waste a lot of time and money trying to get your old iron up to speed but the sad fact is, even though it may work with Color, it will most likely end in a less than satisfactory experience all around. You need to determine if your G5 has PCI, PCI-x or PCIe slots and then purchase the appropriate cards.
However, Final Cut Studio 2 is optimized for the Intel processors. You will see users here and there using the newest models G5 with great success but quite honestly, you need a Mac Pro.
Or just purchase the Aja IO/HD which is a firewire 800 interface and the only firewire device that will preview externally Color.

No video playback on external monitor

I'm using a open-source radeon supported card with an external monitor on my laptop. When I run a merged framebuffer setup I can see video playback on both screens fine but I just want to use the external. However, if I don't use mergedfb I only see a black window during video playback.
I'm sure I have had it working in the past, though on a diff monitor but I am certain that if mergedfb playback AND TV-out playback then this must be doable and I am doing something dumb!
My xorg.conf is here, I've tried quite a lot of things but I am stumped atm.

OK, I thought the solution was:
Option "OverlayOnCRTC2" "on"
But apparently that is deprecated and I need to use:
xvattr -a XV_SWITCHCRT -v 1
How and when would you guys run this command?

Video playback on external monitor working. Only works when Print to Video

I'm having a problem. I'm using FCP 5. When editing, my video playback is not showing up on my external monitor (Sharp MiniDV camcorder). It does however show up on the external monitor when I "Print to Video." This is the first time using FCP 5. I never had this problem with previous versions of FCP. Can anyone tell me whats going on? Thanks

#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

Can't see video playing through external monitor

Well it use to work, seeing the Timeline play through my external monitor.. Here's what I have, FCP 4.5 HD hooked up through Firewire to a JVC tape deck which in turn is hooked up through RCA cables to a small tv set. I have the following setup in FCP Audio/Video settings>Device control Preset: Firewire NTSC and Video Playback: Apple firewire NTSC. I've unplugged the Firewire cable a couple of times and still can't get the Timeline to play in my external monitor. Here's the funny part if I go to Log and Capture I can control the JVC deck and see my mini DV not only play in the Log and Capture window but also in the external monitor. I would think I won't be able to. I must be forgetting a setting in FCP to see my Timeline play in my monitor but for the life of me I can't remeber. Appreciate all sugestions!
G5 dual 2.5 Mac OS X (10.3.9)

Randy,
Many thanks. I really should not use keyboard commands that I'm not sure about.! I probably hit cmd F12 instead of just plain old F12 to do a superimpose. I'm going to start a list of all these settings I need to check. Someday I hope to be able to help someone figure out a problem. Again thanks for taking time to help me out and keeping a few more hairs on my head.
Loran
G5 dual 2.5

Multicamera angle's view out to external monitor?

Hello Forum,
Is it possible to have the angle view of multicamera viewable via transmit to my external monitor? (via Blackmagic Intensity Pro)
Currently, it only displays the active angle.
Thanks all!
- Ryan

You could get a Canopus box and put the video out firewire to a video monitor that composite video in.
To do this the video needs to be a DV stream.
If the video is the new hi def standard with a framerate of 23.97, you will see picture but it won't be frame accurate sync.
If you have a G5 or a Mac Pro you could get another video card and display the video on that.

No Video PB on External Monitor/DV unit with FCP PlayBack

Hello.
I just bought this Sony DVCAM unit today and I am having no luck with view External video from FCP. I have it connected with FW and had no problem with capture in FCP. I tried all settings on FCP external control and checked the Sony variables also. The Deck is a DSR-1500 record/PB DVCam unit from Sony. I never had problems with my DV Camera. I would appreciate some insight on this. I have FCP 4.5 and I have a small Video monitor connected to the Sony Video Monitor. I would rather view NTSC than computer monitor visuals.Thanks

Does the deck have an input switch? If so, set it for DV. I have the DSR-11 and it has DV/S-Video/Composite.
Otherwise:
#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

Video out to external display

Hello, Is there a way to get video out to an external display? I currently have a T5, but am getting a TX. Should be the same for each, though. Rregards, Karl
Post relates to: Palm TX

Just a quick FYI...T5 and TX both have a "normal" 3.5mm audio jack.
Video will be a problem though. It's a shame my cheap little Insignia media player can output Audio and Video via a simple cable.
Wyrenut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Powerbook 17" S-Video Out to TV monitor

Hey all,
If we go out of the S-Video out on a Powerbook 17" 1.5Ghz, and in to a television's Video In, is there a way to use the TV monitor for video only? Like how you can do that on a G5 tower, take the video out and make it extend your real estate.
I don't want the TV screen to be a copy of what's already on the Powerbook's screen. I want to see Logic in the Powerbook, and the quicktime movie from Logic on the TV screen. Does anyone know if this is possible?
Thanks in advance!
ETMi

I've done this with my powerbook, only I had the DVD player app on the TV, and was using the laptop LCD for other apps. It worked just fine. In fact I did it on two different TVs, once using s-video (w/optical sound out even) and once with DVI.
I can't speak to your specifc application (Logic) but I don't know why it wouldn't work the same way.

128MB vs. 256MB Video Card for External Monitor?

I may want to run an external monitor for Final Cut Pro HD. Will getting the 2.16 Processor with its 256MB Video Card drive an external monitor any better than the 1.83 w/ 128MB Video Card? TIA
BTW, I won't be "gaming" at all. Just doing a little FCP HD...
20 G5 iMac/2 GB RAM/250 GB HD Mac OS X (10.4.2)

Randy, I believe you have great technical knowledge
(much more than me) and your math is unobjectionable.
But in my opinion 16% of the graphic card's capacity
just to light up the monitors is not a low figure.
Actually, for generic 2D stuff that doesn't involve OpenGL, Randy has it correct. You'll find that VRAM makes absolutely no difference to Photoshop, for instance. A couple of big screens will happily run on 64MB VRAM.
Once you start running pro applications on those
monitors, and expect real-time responsiveness and
lower and lower rendering times; you might come to
realize that 128MB of VRAM is enough, it's a lot...
but not excessive.
You only need the extra VRAM for apps that specifically use the graphic card, through OpenGL, Core Image, Core Video or similar. Of course, there are more and more apps which leverage the graphics card this way, so 256MB is going to be more future-proof, and is what I went for.

Video out to external monitor

Similar Messages

Maybe you are looking for