Video Out to Firewire is not working

I found that the internal speakers are not giving me a good sample of final output. I have a TV hooked up to a JVC Deck with FW in that I can use to judge sound.
I used prefs to set up Video Out but it is not taking. I have quit all other apps that may take that bus. i.e. FCP and Motion.
What is wrong?

just a follow up, i am now pretty sure that it was an issue of signal loss. i now use a dvi to hdmi adapter instead, and a 12' hdmi cable. it works well.

Similar Messages

Video out to Samsung A650 not working correctly

I have a MBP 2.2Ghz, and I recently purchased a 46" Samsung LN46A650. I used the DVI to VGA adapter and a VGA cable for the first week and it worked. then i wanted to move further from the tv, so i bought a VGA extension cable. tried it, it didn't work right because the image on the tv was somewhat distorted, and it was over towards the right side of the screen.
eventually it worked after i was just restarting. now it is not working again, but worse, is that now even when i dont use the extension cable it still isn't working.........how do i fix this? i just want it to output the 1080 resolution correctly. i would be able to post a picture of the screen if you think that would help.

just a follow up, i am now pretty sure that it was an issue of signal loss. i now use a dvi to hdmi adapter instead, and a 12' hdmi cable. it works well.

No Audio When using Video Out to Firewire

I do not get any audio when I use Firewire ntsc as my video out. When I set video out to canvas playback then I get audio. I want to use print to video but I cannot because the audio will not work with Firewire. I get the image on my external monitor but not the audio. I checked to make sure and the audio was not on the recorded dvd. I cannot not use print to video with canvas playback.
My Easy Setup is Format: NTSC, Use DV NTSC DV Converter. I tried using Firewire basic and got the same results.
Please Help
Ken

The audio does not play at all from the timeline if video out is set to Firewire. To answer your question, no the audio does not play in the external monitor when playing back from the timeline when Canvas is used as the video out. However, I don't believe the converter box is the problem. The audio would play in the internal speakers when using firewire as video out but it does not.
Is there a problem with FCE 4?

Timed video out through firewire?

Hey everyone,
In Final Cut Pro 5, is there a way to set print to video on a timer? For example, print to video on Friday at 2PM.... Or simply, just play the entire video in the timeline at a specific time?
I'm assuming not, so does anyone know of any program out there that can play Quicktime videos out through Firewire on some kind of timer system?
I know this is an unusual request... and I can explain why exactly I want this if anybody wants me to, but it's kind of a long story =)
Any suggestions would be great!
Thanks,
Dean.

You can easily set up an Automator script to work with an iCal event...
use the script for PLAY MOVIE instead of record new video that I used here:
http://homepage.mac.com/captmench/QTAuto.swf
The video was done in haste... and there are a few errors in it... but you'll get an idea of what to do.
Good luck,
CaptM

After update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call

after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
It is not practicale to do this always any one faces the same problem

There may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
If no change with a new SIM card, the standard troubleshooting steps in order are:
Power your iPhone off and on.
An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPhone with iTunes from your iPhone's backup.
Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
If no change after any of these steps in order, your iPhone has a hardware problem.

I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

You mean an image such as a scanned document?
If that is the case, the file doesn't contain any text for Reader Out Loud to read. In order to fix that, you would need an application such as Adobe Acrobat that does Optical Character Recognition to convert the images to actual text.
You can also try to export the file as a Word document or something else using ExportPDF which I believe offers OCR and is cheaper than Acrobat.

I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4

I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4 files. Now, they are not compatible. How to I get them into imovie?

Hi
I use
• DV-PAL or DV-NTSC - or -
• AIC
Yours Bengt W

Exchange 2010 Out of Office Assistant not working?

New server with a new Exchange 2010 install into an existing domain...
When users on both the internal network and external network try to access the Out of Office Assistant they get an error message of: " Your Out of Office settings cannot be displayed, because the server is currently unavailable".
I have done tons of research on WebServicesVirtualDirectory and AutodiscoverVirtualDirectory and set both internal and external URL's that work if you go to them in IE )internally and externally offsite).
Here are the settings of Autodiscover and Webservices:
[PS] C:\Windows\system32>Get-WebServicesVirtualDirectory | Format-List
RunspaceId : 86aaf7fc-ca19-45b2-87d1-45ec432a670d
CertificateAuthentication :
InternalNLBBypassUrl : https://MAILSERVER.domain_name.local/ews/exchange.asmx
GzipLevel : High
Name : EWS (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity}
ExternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity}
LiveIdSpNegoAuthentication : False
WSSecurityAuthentication : True
LiveIdBasicAuthentication : False
BasicAuthentication : True
DigestAuthentication : False
WindowsAuthentication : True
MetabasePath : IIS://MAILSERVER.domain_name.local/W3SVC/1/ROOT/EWS
Path : C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\exchweb\EWS
Server : MAILSERVER
InternalUrl : https://MAILSERVER.domain_name.local/EWS/Exchange.asmx
ExternalUrl : https://mail.domain_name.com/owa
AdminDisplayName :
ExchangeVersion : 0.10 (14.0.100.0)
DistinguishedName : CN=EWS (Default Web Site),CN=HTTP,CN=Protocols,CN=MAILSERVER,CN=Servers,CN=Exchange Adm
inistrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=M
icrosoft Exchange,CN=Services,CN=Configuration,DC=domain_name,DC=local
Identity : MAILSERVER\EWS (Default Web Site)
Guid : 4639e4b9-9cf3-4f92-8940-f7c31e07cd47
ObjectCategory : domain_name.local/Configuration/Schema/ms-Exch-Web-Services-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchWebServicesVirtualDirectory}
WhenChanged : 4/1/2010 2:47:37 PM
WhenCreated : 3/11/2010 11:02:22 AM
WhenChangedUTC : 4/1/2010 8:47:37 PM
WhenCreatedUTC : 3/11/2010 6:02:22 PM
OrganizationId :
OriginatingServer : DOMAINCONTROLLER.domain_name.local
IsValid : True
[PS] C:\Windows\system32>AutodiscoverVirtualDirectory | Format-List
RunspaceId : 86aaf7fc-ca19-45b2-87d1-45ec432a670d
Name : Autodiscover (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity}
ExternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity}
LiveIdSpNegoAuthentication : False
WSSecurityAuthentication : True
LiveIdBasicAuthentication : False
BasicAuthentication : True
DigestAuthentication : False
WindowsAuthentication : True
MetabasePath : IIS://MAILSERVER.domain_name.local/W3SVC/1/ROOT/Autodiscover
Path : C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Autodiscover
Server : MAILSERVER
InternalUrl : https://MAILSERVER.domain_name.local/autodiscover/autodiscover.xml
ExternalUrl : https://mail.domain_name.com/autodiscover/autodiscover.xml
AdminDisplayName :
ExchangeVersion : 0.10 (14.0.100.0)
DistinguishedName : CN=Autodiscover (Default Web Site),CN=HTTP,CN=Protocols,CN=MAILSERVER,CN=Servers,CN=Exc
hange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organiza
tion,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain_name,DC=loca
l
Identity : MAILSERVER\Autodiscover (Default Web Site)
Guid : 7a234ea2-20fc-412b-bbf0-3ea5f965d8da
ObjectCategory : domain_name.local/Configuration/Schema/ms-Exch-Auto-Discover-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchAutoDiscoverVirtualDirectory}
WhenChanged : 4/1/2010 3:00:49 PM
WhenCreated : 3/11/2010 11:02:07 AM
WhenChangedUTC : 4/1/2010 9:00:49 PM
WhenCreatedUTC : 3/11/2010 6:02:07 PM
OrganizationId :
OriginatingServer : DOMAINCONTROLLER.domain_name.local
IsValid : True
Test-OutlookWebServices comes up with errors. The Test E-mail AutoConfiguration within Outlook still appears to be looking for Autodiscover at different URLs...
OOF within Outlook Web App functions.
Any suggestions would be helpful!

From your previous post, I understand that OOF doesn't work for both internal and external clients. Error message "Your Out of Office settings cannot be displayed, because the server is currently unavailable" was received from Outlook client side. Please correct me if I have any misunderstanding.
Before we go any further, I would appreciate your help in clarifying the following questions:
1. When did this issue begin to occur, since the installation of Exchange 2010?
2. Can we access and configure OOF from OWA?
As internal & external clients are using different methods/URL to access Autodiscover and EWS, which provided OOF service, I recommend we focus on the internal users first.
To troubleshoot this issue, please install the hotfix mentioned in the following KB on the Exchange Client Access Server first:
Outlook 2007 crashes or you cannot access OOF settings after you install a package that contains the .NET Framework 3.5 with SP1 and the .NET Framework 2.0 with SP2 on an Exchange 2007 Client Access server or on an Exchange 2010 Client Access server
http://support.microsoft.com/kb/958934
After that, check if the issue remains. If there is still problem, please help me collect:
1. Test E-mail AutoConfiguration from Outlook client
1. Launch Outlook 2007 using a correct configured profile.
2. Hold down the CTRL key on your keyboard and click the Outlook icon in the notification area of the Windows taskbar, also known as the notification area.
3. In the menu that appears, click Test E-mail AutoConfiguration.
4. Enter your E-mail Address and Password (if not logged into the domain) in the respective edit boxes.
5. Choose the desired auto configuration methods with Use Autodiscover, clear other selection.
6. Click Test.
7. Please send me the screenshot of the result tab and log tab.
2. Result files after running the following command on the Exchange 2007 server
Get-ExchangeCertificate | FL >C:\cert.txt
Get-WebServicesVirtualDirectory –Server ServerName | FL >C:\EWS.txt
Get-AutodiscoverVirtualDirectory –Server ServerName | FL >C:\Audis.txt
Get-ClientAccessServer | FL >C:\cas.txt
Email them to me at [email protected]
With the title as
"Exchange 2010 Out of Office Assistant not working?"
Regards
Fazal M khan

Brushes app question: does anyone know how to upload a brushes painting as a video? "Brushes Viewer" is not working for me ;-(

Brushes app question: does anyone know how to upload a brushes painting as a video? "Brushes Viewer" is not working for me.
Thanks! KAR

Hi, Dave.
If you're using the BlackBerry browser, you can't configure anything to bypass the RIM servers. I believe you may do so by using the Opera browser, but I haven't tried it myself so cannot comment with authority.
I hope that clears up the issue for you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

After upgrading my Macbook to Yosemite, the volume icon at the top right is greyed out and sound does not work.

After upgrading my Macbook to Yosemite, the volume icon at the top right is greyed out and sound does not work.

Interesting bug. I'm cautiously optimistic this will get rid of the weekly annoyance. The difference is that I bought my laptop back in Feb 2015, so it came with Yosemite. I think the issue may have appeared soon after an OS update not long after I got the thing, though. I was using a sudo command in the Terminal, but that is obviously not a fix.
I wonder if there is a broken .plist file that may be fixed ...?

My video camera on iPad2 does not work

My video camera on iPad2 does not work after installing ios7. Anyone else have the same issue? Photos can be taken but not video. Odd.

You shouldn't feel stupid, rather I think Apple should feel stupid. I swear I used to be able to simply select "Video" in the previous IOS version (rather than swipe). What value is there in having to have everyone relearn how to use their iPad?

I bought Hp 15 g207ax, 2 out of 3 usb not working, and all drivers missing, no ethernet or no wifi

i bought a new Hp 15 G207AX.
issue 1 - 2 out of 3 usb not working, 1 usb 3.0 and 1 usb2.0 not working. 1 usb 2.0 is working properly
question 1- is it because of faulty laptop or driver issue? also, if it is driver issue, then why 1 usb 2.0 is working?
issue 2 - All Drivers are missing.
question 2 - where can i find all the drivers?
issue 3 - no ethernet and no wifi connecting
question 3 - is there a driver for ethernet too? can you tell me what drivers i need to install for ethernet or wifi. because without those, i cant do anything?
looking for your immediate reply. as if in 1st question, if usb ports are defective and laptop is faulty, i will ask for a replacement or refund.

Likely all of these issues would be fixed with the chipset driver.
Did you look at the solutions listed in that other forum post I linked to above?
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

HT201412 Sound works (songs) on Ipad 2 but sound on videos (example utube) sound does not work. Video plays with no issue.

Sound works (songs) on Ipad 2 but sound on videos (example utube) sound does not work. Video plays with no issue.Mute us not checked in general settings. Reboot (off/on) has not helped. Deleted apps and reloaded them. Did not help. Any other suggestions thank you

If you lose sound for games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Capturing video via Firewire does not work on CS6

I recently installed 64 bits Windows 7.
The capture function in Premiere CS6 does not work with my panasonic camcorder NV-GS500
Windows recognizes the camcorder, but I cannot do anything with it in the Capture window.
This not an Premiere-specific problem , because also wit Nero I have the same problem.
I expect that the Windows7 driver for my camera needs to be upodated, but Panasonic cannot help me.
Is there anybody out in the Premiere community who knows a solution?

Windows 7 Changed the standard 1394 driver from XP which allows Win 7 to Throttle bandwidth on Firewire devices. This is why Ann mentioned the legacy driver which is basically the old XP driver. The bandwidth throttling causes allot of issues with certain cameras during the Handshake process which is why you often have deck control but no preview or primary video stream. If you follow the instructions in the link above or the paste below to set the Legacy driver for the 1394 controller , that will often resolve these issues. However some firmware on different manufacturers Firewire controllers include these C-State Bandwidth throttling sets so it still may not work. In that case you want to get a Firewire card with a TI chipset. The firmware on TI chips are clean and dont include the C-State changes.
Solution 6: Use the Legacy FireWire driver (Windows 7 x64)
Click the Windows Start button; type "device manager" into the Search box and select Device Manager
Swivel open the "IEEE 1394 Bus host controllers" item
Right-click on your listed 1394 controller; select "Update Driver Software"
Click the "Browse my computer for driver software" button, followed by the "Let me pick from a list" button
Select the option that has "(Legacy)" at the end of the name; click Next and let Windows install the driver
Make sure you restart the system after you make the change to legacy. Also do not have the Firewire device plugged in when changing the driver to Legacy.
Close out of dialogs and retry capture'
Eric
ADK

On Board Firewire does not work properly

I have a new Qosmio X500 with Windwos 7 Professional. The onboard firewire port has serious problems. I used Adobe Premiere CS5 and when I try to play out a clip through the firewire port, I get video reference errors, which means the port is not sending out a continuous signal. I disabled it and installed a firewire PCI Express card and it works fine. The problem is I need that card slot for other things and I paid for a firewire port and it does not work.
I looked on the internet and apparently new laptops have been having serious firewire problems. Does anyone know how to get this port to work properly? I tried going back to legacy drivers but that didn't work.

I don't have one of these machines, and my firewire stuff is in boxes somewhere.
But, perhaps it's a matter of power or level? I remember at some point USB peripherals had some issues unless used with a powered hub. Perhaps a powered firewire hub might help. I know I have a couple someplace that I used when daisy chaining wasn't working.

Video Out to Firewire is not working

Similar Messages

Maybe you are looking for