Video out to Samsung A650 not working correctly

I have a MBP 2.2Ghz, and I recently purchased a 46" Samsung LN46A650. I used the DVI to VGA adapter and a VGA cable for the first week and it worked. then i wanted to move further from the tv, so i bought a VGA extension cable. tried it, it didn't work right because the image on the tv was somewhat distorted, and it was over towards the right side of the screen.
eventually it worked after i was just restarting. now it is not working again, but worse, is that now even when i dont use the extension cable it still isn't working.........how do i fix this? i just want it to output the 1080 resolution correctly. i would be able to post a picture of the screen if you think that would help.

just a follow up, i am now pretty sure that it was an issue of signal loss. i now use a dvi to hdmi adapter instead, and a 12' hdmi cable. it works well.

Similar Messages

Video Out to Firewire is not working

I found that the internal speakers are not giving me a good sample of final output. I have a TV hooked up to a JVC Deck with FW in that I can use to judge sound.
I used prefs to set up Video Out but it is not taking. I have quit all other apps that may take that bus. i.e. FCP and Motion.
What is wrong?

just a follow up, i am now pretty sure that it was an issue of signal loss. i now use a dvi to hdmi adapter instead, and a 12' hdmi cable. it works well.

Problem: text fade in/out in swf-file not working correctly

Hello to all,
this is my first post.
I work in a printing company and we want to administrate now our website by our own and
we have bought now Dreamweaver CS4 and Flash CS4 for Mac. My Flash skill-level is "Beginner",
but I am OK with simple tweenings, using symbols and that.
I have done an advertisment banner for the home, 550x290 px, background-pictures
and headlines fading in and out, later until the end there are three subheadlines for pricing details.
The published swf-file works absolutely fine on my Mac, and also
embedded in the site in Safari and Opera.
Before uploading I wanted to check in IE and Opera on a Windows-PC
and now there is the problem:
the first headline does not fade in, it suddenly just appears.
The second headline fades in the place of the first, when the first one is
fading out. So now, for a second the text is appearing above each other and
both neither fade in nor fade out.
The three subheadlines later start one by one, and they work fine and fade in
and out correctly. All pictures fade in and out correctly, too.
What could that be?
I`ve just installed the newest flash-player on the Windows-PC and
the problem is still there when I open the swf-file or when I embed it in the website.
I would be deeply grateful for any hint.
Thanks!

Hi!
The difference was, the headline property was accidentally "dynamic text", the subheadlines were static.
I missed that.
Before changing that now in the fla-file I checked the old one on differrent company macs,
the problem is only one a few macs, say one of ten had the problem I watched.
I think now, that must be just bad luck or it is a player problem.
Allow me the question please:
should I use dynamic text or static (then I cannot embed the font, the option dispappears then
in the Properties-panel).
Thanks again!

Title & Menu Buttons not working correctly on remote control/ set top player but work in preview.

Title & Menu Buttons not working correctly on remote control/ set top player but work in encore preview. This only happens for a Blu ray project. When a user presses the menu button it should go to the previous menu they were on but it goes to the main menu. When they press the title button they should go to the main menu but it doesn't do anything. My DVD projects work as expected.I've tried creating a new "test" project with different footage and still get the same undesirable results.
Overrides grayed out and set to "not set" for timelines and menus.Project settings and build are set to blu ray. Also I've noticed when I preview a Bluray project the preview window shows a red colored disc next to the Title button when viewing the timelines and green when playing the menus but not so for a DVD project it displays red if motion menus and or timelines are not rendered/encoded. I'm not using motion menus and all the media is encoded according to the project specs.
I've searched this forum but couldn't find the answer. Any help or redirects to a solution would be appreciated. Working with CS5. Thanks.

I found out on my Samsung Blu ray player the remote has a tools button on it that brings up audio, angle, chapter selection etc.and also title selection which is actually the menus and the timelines unfortunately. It's not as easy or direct as last menu selected but it's a workaround at least. I also plan on using a pop up menu. I'll let you know.

Remote does not work correctly after update

Hello,
the subject explain it already:
After upgrading to 2.3 the apple remote does not work correctly anymore:
I need to push the buttons twice, and than atv is only reacting sometimes.
Any ideas?
BR
Frank

Same problem here. First, I thought it was the Apple remote's battery. I replaced that and the problem persisted. I then used my digital video camera to verify that the remote was actually transmitting infrared, it was. In frustration, I tapped the buttons rapidly while pointing at the Apple TV. The Apple TV responded. The next button press it failed to respond. I tapped rapidly again and it finally responded. After many many rapid presses, while pointing directly at the Apple TV, it finally began responding to all presses. Once I'd regained control (I thought) I unpaired and re-paired the remote. Everything continued to work. At that time I also saw that I could "learn" another remote. So, I set up my Samsung TV remote. Sweet. Until the Apple TV went into screensaver mode again and I had to go through the same rapid button press sequence... with either the Apple remote or my learned Samsung remote. Conclusion, since the Apple TV will become fully responsive after the rapid button press sequence, it is certainly a software related problem.

Email pushing not working correctly for office email - 3 seperate devices/carriers

We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
User 4 is on the older nextel blackberry push to talk, and is not on outlook.
We do not have an exchange server. Our emails were all set up through our devices.
Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
Thank you in advance for any suggestions.
Caitlin Talbot

Potential solution for windows for a side-by-side install. This works for me.
To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
+ Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox 4\firefox.exe
+ Open profile manager. Start > Run : firefox.exe -ProfileManager
+ In profile manager create Two Profiles.
firefox3.6
firefox4
+ In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
+ Create two windows shortcuts.
* General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
* General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
That's it. Links from external programs should now open in your default browser.
Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile]

1st Gen iPod touch not working correctly?

I have a 1st generation 8GB iPod Touch. It's not working correctly.
My biggest problem is that, unexplaiably, certain areas of the screen don't seem to register touch anymore. There is a sort of "L" shape on the left and bottom edges of the screen that won't register touch, making it impossible to move applications to the previous page on the home screen and making it hard to use the keyboard/buttons while in portrait mode. It's extremely frustrating to try to change the volume while playing a song, as I now have to either put the iPod in sleep mode then double tap the home button or flip it to cover flow and double tap the home button to do it.
http://i38.photobucket.com/albums/e140/Vipershark/IMG_0001.png
(Highlight the image to see it better.)
This is a screenshot of the working/non-working areas that I made using the Whiteboard application. The white area that you see (excluding the little half circles of black which are extended brush strokes and not actually working areas) is the area that doesn't work. I can't seem to figure out why it happened, as I've never dropped or otherwise damaged it. It just happened one day, and I don't know why.
But I can't fix it. I've tried everything. Upgrading (I'm now running iPhone OS 3.0 which still didn't fix the problem.) didn't work, restoring didn't work, deleting everything and restoring from factory settings didn't work.
I'm also having a few other problems as well, though they're not as bad. My home button seems to stop working sometimes and sometimes the entire screen witll stop registering touch until I put the iPod to sleep and turn it back on. It also seems to go a lot slower than usual.
My iPod is less than a year old. Can you help?

Vipershark,
I had a very similar problem this past weekend with my 1G 8GB iPod touch. But with me, just the left side of the screen wasn't registering my touch. I could still access the bottom section, which you cannot.
The good news for me is that I fixed it and I hope it works for you as well. What fixed it for me was resetting all my settings. To do this, go to the settings icon, then click on general, and then on the very bottom is reset. Choose "reset all settings."
Apparently this is different than a restore through iTunes, which you tried. I also tried that earlier and it did not help.
Of course, the reset solution I used relies on you being able to access all of the correct buttons, so I hope you can!
Please let us know if this works for you. If not, since it is less than a year old, it is still under warranty. Contact Apple and see what they can do.

Function keys are not working correctly

I've been looking all over the various threads and I can't find an answer that solves my problem.
Here are the details:
I bought the computer in the U.S. where I live.
I have a iMac 2.4GHz intel Core 2 Duo EMC 2133 with a 20" screen. Bought it new in February 2008.
I have Mac OS X 10.5.8 (I am waiting for my order for OS Snow Leopard to come in!!)
I have been using a wireless mouse and Keyboard (Love not having cords!)
Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
Here are the problems:
Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows.
Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
A couple more important or interesting facts:
Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
I have restarted the computer.
One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly

Share point in server admin not working correctly... I think

I suspect that the share point in server admin is not working correctly. In workgroup manager when I click on a user and then click on the "home" tab, under the full path field I see a file path of:
afp://server.mydomain.com/Users
However if I go to Server Admin -> AFP -> Share Points then click on the Users share and then click on the share point tab below, enable auto mount is disabled. How can this be possible? I thought for a directory to show up in home in workgroup manager it had to be set as an auto mount. Has something possibly corrupted? And what?

Here's a bit more information about our setup and our experiences with Apple's CUPS implementation:
On the server, all printer queues are set up with only lpr and ipp sharing enabled with the PPD setting for each printer set to Generic Postscript. We found that setting the PPD to the printer specific one on the server caused problems when clients tried to use printer specific options, like paper tray selection, etc.. The selection would be undone, apparently because the driver on the server would override the previous settings. Using Generic Postscript allows the client PPD settings to go through unmodified. Our printers are general a mix of HP LaserJets and some Sharp Copiers.
All clients use lpd to the server queues with the printers' actual PPDs configured. Using ipp is superior in that printer feedback (jams, out of toner, etc) makes it back to the clients, but ipp only works when the client, the server, and the printer are on the same network. If the ipp client is not on the same network, the client spooler immediately goes into a paused state and the print job is stuck on the client.
Using lpd to the server queues works reliably, but there is no feedback to the client. Jobs disappear from the client queue and go to the server, appearing to the user as a successful print. If the printer is down, there's nothing they can see or do about it.

Substitution rule is not working correctly

Hi PS Gurus,
We have a problem in one of the newly created projects that the substitution rule is not working correctly; the data is not copied to the WBS element Cust. Enhancement tab.
Project 1 is working fine and the data is copied & Project 2 and Project 3 are not getting all the data copied to the WBS element,
In that project profile (substitution rule is given), substitution rule is also maintained
So please help why in one project substitution rule in working & other isnu2019t.
Many Thanks in Advance.
MM

Hello Menaka,
Select the WBS element in the project builder.
Cleck on Edit --> Validation Substitution --> Substitution
You will get the list of Substituitions, Double click on the required Substition rule.This action will generate a log, whether substitution has been succesfully caried out or with some error.
Kindly provide us that error log to guide you further.
Regards
Ravi

Query is not working correctly

Hi all,
Below query is not working correctly. Please let me know, if you find the mistake
select
a.name,
b.VOD_NAME,
count(xm.ATTRIB_03)
from
siebel.s_vod b
left outer join ISS_OBJ_DEF c on b.OBJECT_NUM=c.PAR_VOD_ID
left outer join vod d on c.VOD_ID=d.row_id
left outer join PROD_INT a on d.OBJECT_NUM=a.CFG_MODEL_ID
left outer join PROD_INT_XM xm on a.row_id=xm.PAR_ROW_ID
where
b.VOD_TYPE_CD='CLASS_DEF'
and
c.LAST_VERS = 0
and
b.vod_name='Componentes'
group by a.name,b.vod_name having count(xm.ATTRIB_03) >=5

user9522927 wrote:
Hi all,
Below query is not working correctly. Please let me know, if you find the mistake
select
a.name,
b.VOD_NAME,
count(xm.ATTRIB_03)
from
siebel.s_vod b
left outer join ISS_OBJ_DEF c on b.OBJECT_NUM=c.PAR_VOD_ID
left outer join vod d on c.VOD_ID=d.row_id
left outer join PROD_INT a on d.OBJECT_NUM=a.CFG_MODEL_ID
left outer join PROD_INT_XM xm on a.row_id=xm.PAR_ROW_ID
where
b.VOD_TYPE_CD='CLASS_DEF'
and
c.LAST_VERS = 0
and
b.vod_name='Componentes'
group by a.name,b.vod_name having count(xm.ATTRIB_03) >=5I couldn't see through the internet what happend when you ran said query. How about helping us out by showing us the evidence that it "is not working correctly".
"Here's a picture of my car sitting in the driveway. Why won't it start?"

Smart feed not working correctly

hello,
the smart feed are not working correctly in this course page :
https://deimos.apple.com/WebObjects/Core.woa/BrowsePrivately/upmc.fr.2857894925. 02857894930
Modified=01ca6e794f33e660
I don't understand why...

C, sorry…I read your posts out of order. I see that you have links to your smart groups after all. My apologies.
It's as you say, the course pages load up, but I don't see anything in the smart groups. Just thinking out loud here…maybe the search criteria don't genuinely match anything on your site? Perhaps there are actual matches, but you've hidden content with a new credential?…I accessed both pages using the "Unauthenticated" and "All" credentials. My last/craziest guess is that it has something to do with localization…français versus anglais?

Sound blaster not working correctly?

Sound blaster not working correctly #I have a 64 bit, windows vista system.
A Logitech Z-5500 Digital speaker system (one woofer, center speaker, left, right, rear right, left rear speakers, and a seperate control head).
I have an X-fi gamer sound card.
I recently formatted my hard dri've and reinstalled everything. Trying to make everything happy again. Here is my problem:
When I use the Creative Console Launcher (CCL), my front right speaker tests fine. My front left speaker comes out of the woofer. And no other speakers will test at all. It does this in all modes (2., 4., 5. and 7.).
When I play some music, it is coming out of all of the speakers. But it won't test properly in the CCL. So, do I have an issue, does what the CCL is doing not matter, or something else In some games, hearing what direction stuff is coming from matters, so if it is sending sounds to the wrong speakers, then I need to figure out a fix.....hence my post.
Thanks for any help you can give, Robert

Well, as the official documatation states, the Archlinux is for more or less advanced users, and if you're not one, we will make you one
First of all, if you compiled your sound as modules, try putting this in your rc.local:
stat_busy "Activating Sound"
/sbin/modprobe your_sound_module
/sbin/modprobe other_sound_module
/sbin/modprobe yet_other_sound_module
stat_done
Change your_sound_module stuff to your module names as you configured in the kernel, of course.
Second: in order to have two or more sound apps working at the same time, you need some kind of sound server. For default one (esd), uncomment esd in /etc/rc.local (remove ! before it) . After that, you'll have to configure your sound apps to use esd. I know that this is extremely easy with xmms and xine, dunno about others. I do not use esd, because my favorite games (quake3 and half-life) require direct access to /dev/dsp.
And remember: nobody blames for asking 8)

Spry tab not working correctly after custom changes

Hi,
i have used Spry Widget for making tabs in Dreamweaver for one of my project. i have customize these tabs. every thing was working fine until i add the horizontal scrolling to tab by jquery. tabs are not working correctly they do not show the tab content. i am sure there is some linking issue. all this problem begin when i added a addition div within the spry div tags if i remove <div style="overflow: hidden;" class="sc_menu" > every thing start working fine but this div control the scrolling and its important to put there. please can any one guide me what i am doing wrong i have uploaded the project to my server. below is the zip file link to download.
http://khurram.visbl.com/test.zip
please let me know if someone having problem in downloading above zip file. also waiting to find a solution for above. hope anyone is here who knows the solution
Best - Khurram

Sorry to disappoint, the structure of the tabbed panels is
<div id="TabbedPanels1" class="TabbedPanels">
<ul class="TabbedPanelsTabGroup">
    <li class="TabbedPanelsTab" tabindex="0">Tab 1</li>
    <li class="TabbedPanelsTab" tabindex="0">Tab 2</li>
</ul>
<div class="TabbedPanelsContentGroup">
    <div class="TabbedPanelsContent">Content 1</div>
    <div class="TabbedPanelsContent">Content 2</div>
</div>
</div>
As soon as you change that structure, this widget (out-of-the-box) will not work.
Gramps

Program not working correctly-Help!

class Sort
     /* method takes an array of integers as an input,
     * and returns a copy with the element values sorted
     * by select method.
     int[] selectSort(int[] input)
          /*declare variables to be used in array */
          int x, y, max, temp;
          int[] select = new int[input.length];
          /*This loop reads the entire array */
          for(x = input.length - 1; x>0; x--)
               max = 0;
               /*This loop checks to see if any number is
               lower possible greatest number /
               for(y = 0; y <= x; y++)
               {//Returns number if lowest number
                    if(input[y] > input[max])
                         max = y;
                    }//end of if statement
               }//end of inner loop
               /*Switches the values */
                    temp = input[x];
                    select[x] = input[max];
                    select[max] = temp;
          }//end of outer loop
          return select;
     } //end of selectSort()
     /* method takes an array of integers as an input,
     * and returns a copy with the element values sorted
     * by bubble method.
     int[] bubbleSort(int[] input)
          int[] bubble = new int[input.length];
          for (int x = 1; x < input.length; x++)
               for (int y = 0; y < input.length - 1; y++)
                    if (input[y] > input[y+1])
                         int temp = input[y];
                         bubble[y] = input[y+1];
                         bubble[y+1] = temp;
          return bubble;
     } //end of bubbleSort
**********************Test Class**********************
class TestSort
     public static void main(String[] args)
          /* count variable used as loop counter when
          * result table display is generated
          int count;
          /* variable for object of class Sort */
          Sort x;
          /* create object of class GroupEx2 */
          x = new Sort();
          /* create a source array of integer elements */
int[] y = new int[5];
/* assign values to array elements to be sorted     */
          y[0] = 8;
          y[1] = 5;
          y[2] = 3;
          y[3] = 9;
          y[4] = 1;
          /* create variable for target of select sort array */
          int[] ss;
          /* create variable for target bubble sort array */
          int[] bs;
          /* call method to return an array with element values select sorted*/
          ss = x.selectSort(y);
          /* call method to return an array with element values bubble sorted*/
          bs = x.bubbleSort(y);
          /* display original and sorted arrays in three columns*/
          System.out.print("Input Array" + "\t");
          System.out.print("Select Sort" + "\t");
          System.out.println("Bubble Sort");
          for (count = 0; count < y.length; count++)
               /* Column 1: original array */
               System.out.print("input[" + count + "] = " + y[count]);
               /* tab between columns 1 and 2 */
               System.out.print("\t");
               /* Column 2: select sorted array */
               System.out.print("select[" + count + "] = " + ss[count]);
               /* tab between columns */
               System.out.print("\t");
               /* Column 3: bubble sorted array */
               System.out.println("bubble[" + count + "] = " + bs[count]);
          } // end of display for loop
     } // end of main()
} // end of class TestSort

Thanks for the Bash! I'm surprised you had the time
for it.Go back and look at your original post. A whole bunch of code, and the only description of the problem is "not working correctly." Do you honestly think that's a reasonable way to ask for help? Do you go to the doctor and say, "I'm sick" and then just wait for him to cure you? Do you take your care to the mechanic and say only, "It's broke"?
Look, this is your problem and it's your responsibility to fix it. There are people here who are happy to help you, but it's up to you to provide a reasonable statement of what's wrong, what you've tried, what you don't understand. For instance:
Does it compile? If not, post the complete error message.
Does it run, but throw an exception? If so, post the stack trace.
Does it not throw an exception, but not behave the way you expect? Then describe the expected beavior and the observed behavior.
Do you really need to be told this stuff? It seems like common sense that when you're asking people to spend their time helping you, you should give them the information they need to be able to do so.

Video out to Samsung A650 not working correctly

Similar Messages

Maybe you are looking for