Video output size to use for a (horizontal) Lower Third.

Hi. I would like to know what the video output size to use for a (horizontal) Lower Third. I will be very grateful for your help. Thanx in advance. Sam.

Make it the same horizontal & vertical size as your video.  The upper 2/3 needs to be transparent.

Similar Messages

  • Output type is used for sending / printing "schedule lines" against sch agr

    hi
    which output type is used for sending / printing "schedule lines" against sch agreement
    LPET or LPH1?
    sara

    Hi Sara,
    It is LPET.
    Thanks & Regards,
    Kiran

  • Video Podcast Size/Length Limit for iPhone?

    Hi;
    I have subscribed to the "Programming Paradigms" video podcast from Stanford University available through iTunes freely [1].
    The lesson's download to the Mac fine and play on it, but when i sync them to my 1st generation iPhone (v2.1) only the first episode works as expected and other lessons plays without a video (only audio).
    I realize first lesson's length is smaller (17 min. versus 40+ min.) than others, is there a video podcast  size or time limit for iPhone exists and if so how can i bypass these limits?
    [1] http://deimos3.apple.com/WebObjects/Core.woa/Browse/itunes.stanford.edu.16173481 11.01617348114
    Thanks,

    The standard itself doesn't have these limitations, but each "device" may have it's own limitations that you need to be wary of. For example, I can encode an .mp4 video file that will play back fine on a Playstation 3, but, due to it's bitrate, will not play back on an iPod.
    However, any app on a computer that is listed as being able to playback MPEG-4 content will recognize it as such and play it back.

  • New Best Practice for Titles and Lower Thirds?

    Hi everyone,
    In the days of overscanned CRT television broadcasts, the classic Title Safe restrictions and the use of larger, thicker fonts made a lot of sense. These practices are described in numerous references and forum posts.
    Nowadays, much video content will never be broadcast, CRTs are disappearing, and it's easy to post HD video on places like YouTube and Vimeo. As a result, we often see lower thirds and other text really close to the edge of the frame, as well as widespread use of thin (not bold) fonts. Even major broadcast networks are going in this direction.
    So my question is, what are the new standards? How would you define contemporary best practice?
    Thanks for your thoughtful replies!
    Les

    stuckfootage wrote:
    I wish I had a basket of green stars...
    Quoted for stonedposting.
    Bzzzz, crackle..."Discovery One, what is that object?
    Bzz bzz."Not sure, Houston, it looks like a basket...." bzzz
    Crackle...."A bas...zzz.. ket??"
    Bzzz. "My God, It's full of stars!" bzz...crackle.
    Peeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee eeeeeeeeeep!

  • Compressed Video File Size Too Large for DVD?

    I exported a one hour and 51 minute FCP Studio sequence to Compressor. I chose the 120 minute 4:3 best quality and Dolby for the audio. It took six hours and thirty five minutes to compress. When I bring the compressed "assets" into DVD Studio Pro, it indicates 5.9 gig. That won't fit on a standard DVD-R disk. Should I have used a different compression scheme when I made my choice in Compressor? Can I fit the movie on a standard DVD, or do I have to go back to FCP to shorten the sequence? What size must it be in FCP to fit on a standard DVD after Compressor and DVD Studio Pro?
    Thanks

    iDVD encodes (compresses) the video before burning
    the DVD, so there's no problem. Your iMovie project
    will fit.
    The iDVD capacity is best expressed in time instead
    of size. iMovie 4/5 can include up to 2 hours of
    video. A little less, counting iDVD features.
    Karl
    Hi Karl
    I have an iMovie file that is 3hr and 10min long. I have a dual layer burner and dual layer DVD's to burn onto. Will this file fit onto the 8.5GB disc? or do I have to compress it somehow? If there is some software that will do this could you let me know?
    The dual layer DVD's say they will fit 215 min of video on them, so why does it reject my file when starting iDVD?
    Thanks for your help

  • What is the best Videoing Chatting program to use for my Macbook Pro?

    I have had Skype for a while now and recently I updated to Skype 5, and the call qaulity is absolutely miserable, it keeps being blurry and freezing and it's a pain to try and talk through. So I was wondering is there any changes or fixes I can do to possibly make it better or improve the quality of my calls? If not is there any other good video chatting programs with good call qualities for Mac?
    Im using Skype on my macbook pro, just saying.

    How can you check if your wifi is good enough for a quality video call?
    Yes I would post on Skypes forum, but there people their are not very helpful or supportive, so Im trying to get other people's opnions on ways to improve the call quality or find a better program.
    Does anyone use any other video calling program that is just as good if not better? If so could you please mention it. I've looked on Google and I know some of the softwares or programs out there, but Id like to get peoples first hand experience with the programs and what they think of some of them out there.

  • What file size is used for "optimized" upload/download?

    When I upload my photo files from Aperture (and previously from iPhoto) I routinely use the upload setting named "dowloading of optimized" files.  I know that this downsizes the files for faster upload/download, but still gives a file size acceptable for great onscreen presentation and for a resulting small print of someone downloads.  Can anyone tell what downsizing Aperture/iPhoto does in this case?  For example, 50% jpeg, email sized jpeg, etc.  Since Apple will kill the MobileMe galleries in June I have to switch to another photo presentation host.  For upload to such a host Aperture/iPhoto gives choices like 100% jpeg, 50% jpeg, etc.  What I want to do is end up with something similar to what I now get with the "optimized" setting.  Thank you.

    You will note that I referenced both programs (iPhoto & Aperture) in my original message above, and I have posted in both forums.  Since both programs offer the same (at least on the surface) option of "optimized" to MobileMe galleries, one might assume that both use the same or a similar system.  Lengthly testing of my own is the "best" solution only if I can not find anyone who is knowledgeable about what these programs do in the upload.  It has been my sincere joy over many many years that I often find people on these forums who possess knowledge much greater than I.  As to the programs changing the algorithum at any time, I doubt that since this MobileMe function will disappear in June.  Seems like a strange time to make changes. 

  • What file size is used for when uploading to MobileMe from Aperture?

    When I upload my photo files from Aperture (and previously from iPhoto) I routinely use the upload setting named "dowloading of optimized" files.  I know that this downsizes the files for faster upload/download, but still gives a file size acceptable for great onscreen presentation and for a resulting small print of someone downloads.  Can anyone tell what downsizing Aperture does in this case?  For example, 50% jpeg, email sized jpeg, etc.  Since Apple will kill the MobileMe galleries in June I have to switch to another photo presentation host.  For upload to such a host Aperture gives choices like 100% jpeg, 50% jpeg, etc.  What I want to do is end up with something similar to what I now get with the "optimized" setting.  Thank you.

    You will note that I referenced both programs (iPhoto & Aperture) in my original message above, and I have posted in both forums.  Since both programs offer the same (at least on the surface) option of "optimized" to MobileMe galleries, one might assume that both use the same or a similar system.  Lengthly testing of my own is the "best" solution only if I can not find anyone who is knowledgeable about what these programs do in the upload.  It has been my sincere joy over many many years that I often find people on these forums who possess knowledge much greater than I.  As to the programs changing the algorithum at any time, I doubt that since this MobileMe function will disappear in June.  Seems like a strange time to make changes. 

  • How do iget hulu plus to play on my tv? I have the video outputs n it wrks for netflix not hulu plus so how do i getit to wrk?

    I wrks on netflix but nothulu and inhave the video outputs

    Do you have an iPad 2 or the new iPad and the Digital AV Adapter (the one with HDMI)? Those are required for Hulu to be able to output to a TV, from what I read.
    Regards.

  • Proper Video output signal from FCPX for Color correction

    I have bene color grading/correcting on my Macbook Pro, but I recently found out (should have known better) that the colors are not very accurate or even universal so I am really correcting colors in the dark.
    I want to get a proper device that I can get a REAL UNIVERSAL VIDEO SIGNAL out form my macbook pro to a monitor.  Right now it is a computer signal.
    I heard of the Matrox box, but I am not sure how it works.
    Really looking for something inexpensive to do some basic correct color grading.
    Anyone can help me steer in the right direction?
    Do I need a new seperate monitor, or justa  device to get the correct video signal?
    Thanks

    Bump... anyone?

  • Video Output for PXI Embedded Real-Time Controller ?

    I plan to purchase a PXI Embedded Real-Time Controller for security monitoring.
    Is it possible to use the video output of a PXI Controller running RTOS to display messages from a LabVIEW RT application ? According to the documentation, it seems that the use of the video output is only possible for PXI Controllers running Windows XP.
    Does it exist a specific application to do this with LabVIEW RT ?
    Thanx.
    H.L.
    Solved!
    Go to Solution.

    Hi Yann,
    The situation seems a bit confusing as in the link you've given above using the local monitor from a pxi labview rt system as the HMI without a pc attached, two messages (here and here) say that it is possible to display an image on the video output of a PXI RT controller using a function of the NI-IMAQ librarey (namely, the IMAQ RT Video Out VI) !
    I have the NI-IMAQ library but no PXI controller to test if this solution should work or not
    Does anyone have the answer ?
    Thanx,
    H.L.

  • What format and size must I use for uploading photos in Creative Cloud?

    I don't know what format (TIF, JPG etc.) and size to use for uploading photos into the cloud.

    Hi John,
    There are no restrictions on the file types you can store in Creative Cloud. However, you’ll be unable to share some file types, such as audio, video, fonts, executable, and application extensions. Sharing of these files is restricted for copyright and security reasons.
    Details here : http://helpx.adobe.com/creative-cloud/kb/cannot-share-certain-types-files.html
    Thanks,
    Manish Sharma

  • Output type not created for outbound delivery while using SHMNT05 idoc type

    Hi Experts,
    Please help me to solve the below issue.
    Problem:- I want to to generate an IDOC(using type SHPMNT06) once the PGI is done for an outbound delivery.
    Already it is working fine when used DESADV.DESADV01 or DESADV.DELVRY07. But now the output type is not getting created when used SHMNT.SHPMNT06. I have created a separate output type ZPJ7 just as a mirror copy of the earlier output type(ZPJ6) used for DESADV.DELVRY07.
    Question:- Is it possible to use idoc SHPMNT06 instead for DESADV01 or DELVRY07? If yes then what are steps to be followed?
    The reason why SHPMNT06 idoc is planned:- We have a scenario to send outbound delivery to 3rd party system via XI. If the outbound delivery is for National(Not for Export) and PGI is completed then send the idoc straight forward to XI otherwise DO NOT generate the idoc, but just create the delivery. Collect all the deliveries in a transport and send it in a shipment. The shipment details can be sent using SHPMNT idoc. Now from XI perspective, if we can utlitze the same SHPMNT idoc for the National delivery(1st case) then perhaps this will require less effort. Hence shipment idoc is required to be generated when the delivery is created and PGI is done.
    Also it would be great if you can advice some better way to solve above mentioned scenario.
    Many Thanks,
    Sanjay

    There could be several reasons. Go to the document and in the extras-output check output determination analysis in the processing log.
    If the output has been created successfully then you need to see your printer determination. Ask basis to check it up. If the problem is that even the print preview is not coming. Check your communication in the output analysis and ensure LOCL is selected. Any other printer will need to be configured.
    If thats done already then check whether you have maintianed the condition record.
    If that too is done then check whether your output type has been assigned to the output procedure and that the output type is listed in the procedure.
    regds
    Jude

  • Video output dimension troubles in CS4

    This is my first project in PPCS4 and I'm having trouble getting an appropriate video output size.  The dimensions of the source clips are 640x480p, and originally only filled a small portion of the frame, with large empty margins around the outside.  I tried scaling up to 299%, which filled nicely, until I realized that the top and bottom were being cut off.  Any suggestions would be greatly appreciated, this is becoming very frustrating !!!

    What kind of source clip (what is the CODEC) and what are your project settings?
    A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
    Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
    If your problem isn't fixed after you follow all of the steps, report back with the DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

  • [SOLVED] Faulty video output with mpv/mplayer, vaapi

    Hi,
    I have a HD6870 with the proprietary catalyst drivers installed, and the packages needed to enable vaapi. The problem I have is that every video application like mpv, mplayer or whatever refuses to give me correct video output with vaapi. mpv for example gives me these errors, depending on filetype:
    avi:
    (+) Video --vid=1 (h264)
    (+) Audio --aid=1 (mp3)
    libva info: VA-API version 0.37.0
    libva info: va_getDriverName() returns 0
    libva info: User requested driver 'xvba'
    libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
    libva info: Found init function __vaDriverInit_0_32
    libva info: va_openDriver() returns 0
    libva info: VA-API version 0.37.0
    libva info: va_getDriverName() returns 0
    libva info: User requested driver 'xvba'
    libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
    libva info: Found init function __vaDriverInit_0_32
    libva info: va_openDriver() returns 0
    Using hardware decoding.
    libva info: VA-API version 0.37.0
    libva info: va_getDriverName() returns 0
    libva info: User requested driver 'xvba'
    libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
    libva info: Found init function __vaDriverInit_0_32
    libva info: va_openDriver() returns 0
    AO: [alsa] 48000Hz stereo 2ch s16
    [vaapi] Decoder profile 'VAProfileH264Main' not available.
    [ffmpeg/video] h264: decode_slice_header error
    [ffmpeg/video] h264: no frame!
    Error while decoding frame!
    Error using hardware decoding, falling back to software decoding.
    mp4:
    (+) Video --vid=1 (*) (h264)
    (+) Audio --aid=1 --alang=eng (*) (aac)
    libva info: VA-API version 0.37.0
    libva info: va_getDriverName() returns 0
    libva info: User requested driver 'xvba'
    libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
    libva info: Found init function __vaDriverInit_0_32
    libva info: va_openDriver() returns 0
    libva info: VA-API version 0.37.0
    libva info: va_getDriverName() returns 0
    libva info: User requested driver 'xvba'
    libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
    libva info: Found init function __vaDriverInit_0_32
    libva info: va_openDriver() returns 0
    Using hardware decoding.
    libva info: VA-API version 0.37.0
    libva info: va_getDriverName() returns 0
    libva info: User requested driver 'xvba'
    libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
    libva info: Found init function __vaDriverInit_0_32
    libva info: va_openDriver() returns 0
    AO: [alsa] 48000Hz stereo 2ch float
    xvba_video: XVBA_CreateDecode(): status 2
    [vaapi] vaCreateContext(): unknown libva error
    [ffmpeg/video] h264: decode_slice_header error
    [ffmpeg/video] h264: no frame!
    Error while decoding frame!
    Error using hardware decoding, falling back to software decoding.
    wmv:
    (+) Video --vid=1 (wmv3)
    (+) Audio --aid=1 --alang=eng (wmav2)
    libva info: VA-API version 0.37.0
    libva info: va_getDriverName() returns 0
    libva info: User requested driver 'xvba'
    libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
    libva info: Found init function __vaDriverInit_0_32
    libva info: va_openDriver() returns 0
    libva info: VA-API version 0.37.0
    libva info: va_getDriverName() returns 0
    libva info: User requested driver 'xvba'
    libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
    libva info: Found init function __vaDriverInit_0_32
    libva info: va_openDriver() returns 0
    Using hardware decoding.
    libva info: VA-API version 0.37.0
    libva info: va_getDriverName() returns 0
    libva info: User requested driver 'xvba'
    libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
    libva info: Found init function __vaDriverInit_0_32
    libva info: va_openDriver() returns 0
    xvba_video: XVBA_CreateDecode(): status 2
    [vaapi] vaCreateContext(): unknown libva error
    xvba_video: XVBA_CreateDecode(): status 2
    [vaapi] vaCreateContext(): unknown libva error
    [ffmpeg/video] wmv3: decoding to AV_PIX_FMT_NONE is not supported.
    Could not open codec.
    Error initializing hardware decoding, falling back to software decoding.
    mpv doesn't crash, it just falls back to software decoding and gives me a grey screen when it's not fullscreen, and when it's fullscreen it tears a lot and flashes random grey stripes everywhere - sound still works fine. Any ideas on what can be at fault here? The only video output that gives me an OK image without tearing or anything else is x11, but it's really slow.
    vainfo gives me this:
    libva info: VA-API version 0.37.0
    libva info: va_getDriverName() returns 0
    libva info: User requested driver 'xvba'
    libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
    libva info: Found init function __vaDriverInit_0_32
    libva info: va_openDriver() returns 0
    vainfo: VA-API version: 0.37 (libva 1.5.1)
    vainfo: Driver version: Splitted-Desktop Systems XvBA backend for VA-API - 0.8.0
    vainfo: Supported profile and entrypoints
    VAProfileH264High : VAEntrypointVLD
    VAProfileVC1Advanced : VAEntrypointVLD
    Last edited by Median (2015-06-07 10:01:38)

    Gusar wrote:
    Uninstall libva-xvba-driver and do
    export LIBVA_DRIVER_NAME=fglrx
    Now try vainfo again. Instead of "Splitted-Desktop Systems XvBA backend for VA-API - 0.8.0" it should say "AMD MMD 1.0" or something like that.
    Thanks, now VA-API at least gives me an output - but the video just flashes in fullscreen. I think another thing to notice here is that the video only plays correctly (gives me an output), if I play it on monitor 1 (I use three monitors) - but I can't get rid of the screen flashing.
    EDIT: Fullscreen only flashes when I use mpv, with smplayer (+mpv) it works ok - but it lags from time to time. mplayer-vaapi won't give me a smooth playback either with -vo and -va as vaapi, and the screen also flashes when I'm using it.
    Any idea on what's wrong? Is it my use of three monitors? This is really, really annoying.
    Last edited by Median (2015-06-06 18:51:40)

Maybe you are looking for