Video Playback Audio Playback options?

I am trying to print to tape for the first time. With no success. My sony gv-d300 record lights go on and heads move, but records nothing. Then tried to use my camcorder to record onto. Same thing. Nothing records onto the tape. I've read that I need to Select firewire on video/audio playback under View. But my options for the video playback are none and digital cinema Preview. Audio playback options are Default and Built in Audio. The Firewire option is in light gray, so I can't choose it. I've looked at my preferences and my firewire is selected under Devices. Can someone help?

FCP is not seeing the recording device(s).
Make sure the target device is turned on before you turn on your computer and launch FCP.
x

Similar Messages

Video Playback Option in "Preferences/Audio-Video Out"

The following did not make it into the User Guide, though it did get into the troubleshooting docs:
http://www.adobe.com/support/techdocs/332121.html
332121 Video Playback option in Audio/Video Out preferences (Encore DVD)
A new option was added to the Preferences menu of version 2.0 of Adobe Encore DVD. When you select Edit > Preferences > Audio/Video Out, you see an Automatic option in the Video Playback section. This option is selected by default, allowing Encore DVD 2.0 to play video in a Standard Direct3D mode. If the feature is not selected, then video playback will be in GDI mode.
The only reason to deselect this option is in the case of poor preview playback or black video. In order for the change in preference to take effect, you must close the Monitor panel and then reopen it.
Background information
Encore DVD 2.0 (unlike previous versions of Encore DVD) uses the Premiere Pro playback engine for video playback. Premiere Pro has three Desktop Display modes: Compatible, Standard, and Accelerated GPU Effects. In Compatible mode, video is played using the GDI. In Standard mode, video is played using Direct 3D. In Accelerated mode, video is played using Direct 3D with GPU.
The default setting for Encore DVD 2.0 is comparable to Premiere Pro's Standard mode (Direct 3D). When the Automatic option is deselected, it is comparable to Premiere Pro's Compatible mode (GDI).
If Adobe Premiere Pro 2.0 detects a Direct 3D error when previewing in Standard mode, it switches to Compatible mode. Encore DVD 2.0 does not have this capability, nor does it provide the same option in the User Interface for the user to switch between the three display modes. This is why the Automatic option was included in the Audio/Video Out preferences.

Welcome to iMovie Discussions.
Sounds like you've been shooting at p ("progressive") frame rate (..24p or similar).
iMovie can't handle that (..except for JVC's 720p footage..) and it thinks that each frame is a "field" (..half a frame). It therefore plays those frames at double speed, thinking that there should be two 'fields' to a single frame.
Did you shoot at a "p" frame-rate..? If so, you'll need to convert the material, with some other program, so that iMovie can handle it.
I can't remember offhand what software might do this, but if you were shooting in HDV hi-def (which is recorded in the camera using the MPEG-2 video system) you may be able to use MPEG Streamclip (click on that blue link) to "unscramble" your material.

All Black Imbedded Video Playback Option Gone?

i used to be able to watch video in three sizes, and the small & medium sizes were surrounded by all black...now i've only two sizes and i can't watch the small size surrounded by all black (only the large, full-screen size, which i most often don't want to do)...all the screen lighting's annoying...help

Two things to keep in mind
There is a forum for Lion, another for MBP owners, and this is not.
And yes you will find lots and lots of threads of same.... no one looks at those that were "Solved"
http://www.apple.com/support/lion

Video playback controls

So.
I have imported an mp4-video (animation) in library an added it on to stage.
With three buttons i want to click through the animation in 3 sequences.
First of all there is a stop action before the video starts playing, so that you can click button 1 to start the video. Then button 2 for the next sequence etc.
In the video playback-options, i have paused the video and added a StopAll-trigger before the label "sekvens2", and the I added a click-function to the button 2 with Play From* calling the label.
Works fine when you click continously through the buttons from 1 to 3, but when I click button 2 from the beginning it wont play the video from that specific place.
What to do? Has it somthing to do with my Playback options? Or?
Thanks in advance

Hi Martin,
Sorry for the delay. So there are a few ways to approach this. Before I begin, let me explain how video (and audio) is treated within Animate:
Video/audio elements are similar to symbols in Animate: they must be explicitly addressed, and they behave as if they have their own "timeline" (duration, really). Unlike symbols, there's no actual timeline for the media element itself, but you can address them in similar ways.
So in your composition, your buttons use code such as sym.play("sekvens1"); - this code is essentially telling Animate's Stage to play from the label "sekvens1", and it will do so. But you're not telling the video element named "Rais_Bionic_Final_12" to play, or where in the video to play from - and so it does not also play.
The simplest way to make this work the way you would like is to add a Play From action to the video element at each of the label times, and enter the time you'd like the video element to play from. If you want to do more coding, you can also do it that way.
I hope this explains it, but if anything is unclear, feel free to ask.
Regards,
Joe

Shortcut for Video Playback

I find myself constantly needed to switch video playback from SD 480i to either a particular version of 720p or 1080i, but can't find a way to map a shortcut.
Anyone have a solution rather than groping my way through the list of (often very similar) video playback options each time?
I've tried mapping it in Apple shortcuts, but although the shortcut faithfully appears listed beside the option in FCP, it fails to actually trigger the option.
Thanks

Hi,
Here is an update. I typed the code myself. I typed:
var vid = sym.$("player");
vid.html('<video width ="390" height="219" controls = "controls" src="santa.mp4" type="video/mp4"</video>');
I then exported in Edge the file to an OAM file and then placed that file into my Muse test site. But the results is not working. Here is the test:
http://designerandpublisher.com/hs_test/our-story.html
The 20-sec MP4 file does not play (it played when I was testing it in Edge). Also on frame 20 I put a "stop" command to stop the timeline, but that doesn't seem to work as it's looping. The MP4 file is in the directly like it should in the above code .
Any help is appreciated. Thanks.

HT1199 cannot play songs, the following comes up - Itunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can anyone help. Cheers Wade Johnson

Cannot play songs, the following comes up - Itunes has detected a problem with your audio configuration.
Audio/Video playback may not operate properly.
Cheers
Wade Lawrence

Hello Wade,
This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
"iTunes cannot run because it has detected a problem with your audio configuration"
Resolution
QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
Cheers,
Allen

Video playback issues -- no audio through interface

Recently, I've just noticed that some applications will playback through my Tascam US-1800 and others won't. Most of the apps I use it for (recording, Band in a Box, iTunes, etc.) have no trouble But I've only recently noticed that apps such as VLC, the Leaping Brain video playback app for streaming content, and Youtube on Safari will only work using the internal speakers. I've seen a number of complaints about Safari's compatibility with Youtube (and none of the half dozen or so fixes I've tried have not worked, such as unchecking the 32 bit box in the Info box, or the HTML5 issue).
In the case of Leaping Brain (Purple Software) there is an option to use Quicktime instead as a workaround, and that works just fine throught the interface.
I thought flash might be an issue, but the tech at purple software says they don't use Flash. Their app supposedly uses whatever is the "default" device. That's only true if it's set for internal speakers, not true if set to us-1800.
I had this issue with Mozilla too, but Chrome works just fine--youtube and other audio comes through the interface loud and clear.
I did search posts for something similar, but there seem to be a LOT of similar, possibly related issues, but none suggesting why this would be happening. I should had that the drivers for the us-1800 are updated for Mountain Lion, and everything else is up to date as well. So, if this is an issue raised and solved before, I apolgize, but I didn't see it.
Thanks,
Tony
iMac 27" (late 2012)
OS 10.8.5
3.4 GHz corei7
16GB RAM

Is the AVR set to 720P or 1080P for output? Use the resolution button on the front of the receiver to adjust.
Depending on what it is set to, the ATV needs to be set to the same setting.
The ATV does not support 1080i, if the receiver is set to that, change it.
Might be as simple as changing the HDMI port the ATV is connected to on the receiver.

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy

Problem with audio configuration that affects audio/video playback

Recently, when I watch video on i tunes that sound and picture to not match up. Sound seems to be on-time but the picture is jerky and behind. I un-installed my video driver and reinstalled. Problem persisted. I started my computer in safe mode and it said there was a problem with the audio configuration that effected audio/video playback. I uninstalled i-tunes and re-installed and the problem still persisted. I'm at my wits end and it is driving me crazy. Windows Vista is automatically updated so that's not the problem. Please help.

Have you had a chance to look at this troubleshooting page? It may be of some help: iTunes for Windows: iTunes has detected an audio configuration problem

I'm downloading using RealPlayer But the video playback is jerky. The audio playback is OK.   Can anyone suggest a solution. Would upgrading to RealPlayer Plus be a good thing to do?

I'm downloading using RealPlayer But the video playback is jerky. The audio playback is OK.
Please can anyone suggest a solution.
PS Would upgrading to RealPlayer Plus help?

I can't understand how internet speeds can be the cause of the problem. My problem with a jerky playback is that I have already down loaded.   Could this be to do with my computer (I maybe able to persuade my wife that I need a new one). Earlier I was listening to a clip of the MJQ, downloaded from UTube, and although the sound was good the picture was not.
My computer is an iMac with an Intel Core 2 Duo with a processing speed of 2.8 Ghz. Does this information help?

MPEG-2 file with AC3 5.1 audio: no audio (neither in current video playback, nor after encode), but plays okay in QuickTime X

Mavericks 10.9.3
Latest Mac Mini, 8GB RAM, two 256GB SSD
Compressor 4.1.1
I have an MPEG-2 file with AC3 5.1 audio which plays in QuickTime X as expected.
I have a second MacBook Pro with Compressor 4.1.1, where the audio is fine - both as current video playback of the source, and post-encode using Apple Devices HD (best quality) setting.
However in the Mac Mini Compressor there is no audio (neither in current video playback of the source, nor after encode using Apple Devices HD (best quality) setting).
Troubleshooting
- main difference between machines is the Mac Mini has Elgato software (EyeTV and Game Capture HD)
- I've checked the QuickTime components are same on both machines, except for EyeTV audio component on Mac Mini
- there are no plug-in audio components
- I've repaired permissions using Disk Utility
- I moved Compressor to trash, deleted compressor plist files, and reinstalled

MediaInfo trace:
General
Complete name : /Users/tester/Movies/export-tests/test24trailer.mpg
Format : MPEG-PS
File size : 12.9 MiB
Duration : 12s 576ms
Overall bit rate mode : Variable
Overall bit rate : 8 614 Kbps
Video
ID : 224 (0xE0)
Format : MPEG Video
Format version : Version 2
Format profile : Main@High
Format settings, BVOP : Yes
Format settings, Matrix : Default
Format settings, GOP : Variable
Duration : 12s 533ms
Bit rate mode : Variable
Bit rate : 7 995 Kbps
Maximum bit rate : 38.8 Mbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Active Format Description : Letterbox 16:9 image
Frame rate : 59.940 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.145
Stream size : 11.9 MiB (92%)
Audio
ID : 189 (0xBD)-128 (0x80)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Muxing mode : DVD-Video
Duration : 12s 576ms
Bit rate mode : Constant
Bit rate : 448 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 688 KiB (5%)

Controlling Speed of audio and video playback ?

Hi!
I would like to know if there is (or will be) a way with
upcoming Flash CS4 or even with Adobe Flash Player 10 capabilities
(or even with Adobe Pixel Bender) to control the speed of an audio
or video playback.
For example being able to play some sound slower or faster
and even adjusting audio pitch (and other audio filtering).
It's been a while that I've been looking for this (back to
Flash Player 6 when Flash was part of Macromedia) and with all
progress achieved since then I hope there is some accelerate and
decelerate feature now.
Please let me know about it.

More information needed for someone to help... click these links and provide the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
Also, H.264 will NOT work inside an AVI wrapper http://forums.adobe.com/thread/854115

Loss of Audio and Video Playback

Hello.
I am currently using Adobe CS6 Production Premium on Windows 7 Ultimate. I have updated alll of my sound card drivers.
While in Premiere Pro, if I unplug my headphones, so that I can hear through my speakers, the video and audio playback hangs. In order for both playbacks to work again, I must restart the program. The program itself does not freeze, as I am able to drag clips as well as save the project.
Any help would be appreciated.
Thank You.
Tyler

More information needed for someone to help... click these links and provide the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
Also, H.264 will NOT work inside an AVI wrapper http://forums.adobe.com/thread/854115

Video Playback Audio Playback options?

Similar Messages

Maybe you are looking for