Video playback controls not working properly

video
I put a video into edge and it works but the player controls don't show up when you roll over any part of the movie they only show up if you roll over a specific area at the bottom of the video, A very small area. I want them to be there either always or when the user rolls over any part of the video. I attached a link of the video.

I know you will hate Captivate for this. But if you are publishing to HTML5, the skins you select here won't make any difference as HTML5 output comes with its own mysterious skin which is not visible until you publish and check.
Here is how that skin looks when viewed in Google Chrome browser on my laptop running on Windows 7.
Here is the skin I have used for that in the Captivate editor.
The best way to test these outputs is from a webserver or SCORM Cloud.
Sreekanth

Similar Messages

Captivate 7 event video playback controls not working

Hi,
I'm using Captivate 7 and published an mp4 event video with limited playback controls (only play, pause, back, and close) on the slide, since the event video controls won't show up once published. When I publish the HTML5 video (with or without seamless tabbing) the controls are not working. When I click play the video plays and I can pause it, but when I want to continue play, the controls are not working.
I tried only to use the skins (clear, corona, and halo) given with the event video, but then I can't pause the video at all, since the controls are not showing.
We need the video to play in HTML5 mode for iPads and computers, but we're at a loss with the controls. The video has got to be limited to only play, pause, back, and close - no scrubbing or forwarding. Any ideas?
Thanks,
Nat

I know you will hate Captivate for this. But if you are publishing to HTML5, the skins you select here won't make any difference as HTML5 output comes with its own mysterious skin which is not visible until you publish and check.
Here is how that skin looks when viewed in Google Chrome browser on my laptop running on Windows 7.
Here is the skin I have used for that in the Captivate editor.
The best way to test these outputs is from a webserver or SCORM Cloud.
Sreekanth

When I go to open Itunes I get a message that says "Itunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly.

When I go to open Itunes, I get a message saying "Itunes has detected a problem with your audio configuration. Audio/Video playback may not work properly. I've tried closing and re-opening Itunes but it still comes up. I've also tried removing quicktime, repairing Itunes and restarting my computer after that. It still says the same thing. I've also tried reinstalling Itunes as well.

Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

This message recently popped up on my PC - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." What does this mean and how to fix ??

Hi Everyone - recently this message popped up on my PC, when I was trying to import cd's into the iTunes library and then onto my iPod - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." Can anyone tell me what this means and how to fix it ?? I am not fantastically PC savvy, so any information explained fully and all steps to follow to get my music playing again would be great !! Thanks, SC

Hi B, thanks so much for helping me troubleshoot !!
Ok, so when I went in to check the Audio tab of the Sounds and Audio Device Properties, I found the following:-
* Sound Playback Default Device = No Playback Devices.
* Sound Recording Default Device = No Playback Devices.
* MIDI Music Playback Default Device = No MIDI Playback Devices.
All text in this drop-down box were light grey, and therefore unable to be selected or altered.
I also tried playing a cd through Windows Media player, to see if I could get sound a different way. When I put the cd in and clicked on Play, the following message appeared, "Windows Media Player cannot play the file because there is a problem with your sound device. There may not be a sound device installed on your PC, it may be in use by another program, or it may not be functoning properly."
Any ideas ? I had sound previously, but then a work colleague re-built the PC to add more space to the hard drive, and since then, no sound. I know this may now not just be an iTunes issue, but I would appreciate any assistance you can offer.
Thanks again,
Shell

When I open Itunes on my PC it says, Itunes has detected a problem with your audio configuration. Audio/video playback may not operate properly

When I open Itunes on my PC it says, Itunes has detected a problem with your audio configuration. Audio/video playback may not operate properly. I removed some unused programs from my pc before this happened and I think I may have removed something I shouldn't have.

I had this same problem and my sixteen year old figured it out. Since the Windows PC running iTunes (which supports a housefull of AppleTVs) was running in a closet, he suspected it was due to having no speakers attached.
Sure enough, when I went into control panel to look at my sound settings, I noticed something I had missed previously. There was a red mark on the device. I took his advice and plugged in some earphones to the speaker jack and, wallah, the red mark turned green and the iTunes warning never popped up again.

HT1199 cannot play songs, the following comes up - Itunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can anyone help. Cheers Wade Johnson

Cannot play songs, the following comes up - Itunes has detected a problem with your audio configuration.
Audio/Video playback may not operate properly.
Cheers
Wade Lawrence

Hello Wade,
This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
"iTunes cannot run because it has detected a problem with your audio configuration"
Resolution
QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
Cheers,
Allen

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy

Itunes has detected a problem with your audio configuration Audio/Video playback may not operate properly

I cant copy the music from itune library to iphone. Message "itunes has detected a problem with your audio configuration Audio/Video playback may not operate properly" I unistalled the itune from the pc and download the itune again but still same message come up.

I'm having the same problem. I have downloaded Itunes again but still the same problem.

ITunes has detected a problem with your audio configuration.Audio/video playback may not operate properly. Help please.

I haven't used itunes here much just been playing the songs I had on it. Now i downloaded some more songs i plugged in my Ipod touch and it's not showing up and giving me the message above (Itunes has detected a problem with you audio configuration. Audio/video playback may not operate properly. I uninstalled Itunes and quicktime restarted computer and still the same thing. What is going on?

Try reinstalling QuickTime, as this article suggests
http://docs.info.apple.com/article.html?artnum=304424
Other people have had luck with deleting their QT rpeferences file:
C:\Documents and Settings\username\Local Settings\Application Data\Apple Computer\QuickTime\QuickTime.qtp

Premiere Pro CC Source and Program Playback Controls not working.. help please.

Hi,
Need your help to find out why none of the Premiere Pro CC Source and Program Playback Controls are working.. I can do playback using spacebar, but not clicking on the controls... same goes the rest.
Thank you,
Mauro

Dear Mark,
Thank you for the hint/link, reseting the toolbar did the trick.
Regards,
Mauro

Phone Controls Not Working Properly In my Lumia 930

Dear Sir,
I'm Using a Nokia Lumia 930 phone, just purchased a month ago. for the first time i on my phone, there were few o/s updates appeared and i made a update. when I plug my headphone to the phone, controls are not functioning properly. the button in the headphone
not working and sometimes it works but i tried with other Lumia device with my headphone, it's working perfectly. Please give me a solution.
Thanks

For help using Windows Phone please post on the Windows Phone forums on
http://answers.microsoft.com .
The Tools for Windows Phone development forum is for developers to discuss writing their own Windows Phone apps.

Play/Pause controls not working properly after IOS 8

I like streaming content off of a website I visit in safari. Before the update, I was able to play/pause the content from the lockscreen, I was also able to do it using my apple earpods. Now this feature doesn't want to work properly. It will work when I start listening, but if I let it play or stay paused for more than a minute, the controls stop working. If I press pause in the lock screen, nothing will happen. However, when I Slide-To-Open, the audio will start playing (or pausing) like I intended.

Follow-up to my earlier post that iPhone 6 Bluetooth not working correctly. I purchased a Jawbone MiniJambox to use as a speaker phone in my office. Everyone in our company thinks they are the best. However, it is experiencing the same issues as with all my other Bluetooth headsets. Everything works except cannot answer or hang up calls pushing the buttons on the Bluetooth devices. The Bluetooth patio speakers in our courtyard also have the same issue. However, my colleagues using iPhone 5 and 5s who did not update to iOS8 are using all Bluetooth devices without any issues. Apple says it is a problem with my Bluetooth device. Come on Apple.... This makes 7 different Bluetooth devices with different manufacturers. You cannot possibly believe the problem is with the Bluetooth devices when iOS7 works perfectly fine...
On another issue, my iPhone 5s worked perfectly fine in my vehicle entertainment center connected via USB. The vehicle entertainment center had complete control of my iPhone and iTunes. However, now I plug in my new iPhone 6 and it no longer communicates with my vehicle entertainment center. Again when I called Apple, they said my vehicle entertainment center needed a firmware update. Are you kidding me... That is a bunch of BS...!!!

Video tag controls not working.

Hi,
I have a HTML 5 video tag in a page,
Play/ Pause for the video is working in Chrome/Firefox, But in case of I.E. it does not work.
The code is:
<video style="width:100%; height:100%" class="videoPlayer" controls="controls" runat="server" id="video1" onclick="this.play();">
</video>
Do I need to add extra code for Play/Pause for I.E.?
Thanks,
Vinay

Hi Vinay,
I think this is what you need.
Using JavaScript to control the HTML5 video player
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Video playback controls not working properly

Similar Messages

Maybe you are looking for