Video Playback Dark

Whenever I playback video using Quicktime, or in Final Cut Pro, just video playback period, videos are always very dark, and details hard to see. When I playback the exact same video (trailer from apple) then it plays back fine and with brightness and detail on a Cinema Display. Is that natural? I have a MBP with Glossy Screen.

Ron, this is slightly confusing to me:
+Whenever I playback video using Quicktime, or in Final Cut Pro, just video playback period, videos are always very dark, and details hard to see.+
So for the above, I assume (from what you say in the second sentence) we are talking about video trailers from Apple, correct? Here is your second sentence:
+When I playback the exact same video (trailer from apple) then it plays back fine and with brightness and detail on a Cinema Display.+
So are you saying that you are not using Quicktime or FCP when you play back the "exact same video trailer" that you played the first time with bad results? What program are you using when the Apple video trailer plays back fine?
Sorry to just be asking questions without providing any advice or solution, but I am trying to understand better.

Similar Messages

Wierd problem with video playback getting corrupted

I have a "week 38" iPod Touch 16 that didn't exhibit any negative black issues or other problems.
But ever since I did the 1.1.1 update I sometimes get weird psychedelic colors in the dark areas of the video playback (iTunes purchases or YouTube). A reset (holding both buttons for 10 seconds) solves the problem, but it will sometimes come back a few days later.
Anyone else seeing this?

Same thing has happened on my 38 wk model, once.
It happened first on You Tube, so I thought it was a problem with that but, when I checked some videos they were also, 'psychedelic'. Those I knew WERE fine as I had loaded them only that morning and they were beautifully crisp and clear.
I was actually, showing it to a bunch of people at the time and that was a real let down after their initial 'WOW' reactions at the device.
Fortunately, I shut down. And when I restarted, all was back to normal.
Hope it doesn't do it again!!!

9 hours of video playback using this

anyone use this?
http://www.tekkeon.com/site/products-mypower.php

The orignal 30GB Video iPod had a video playback of 2hrs with the brigthness at max. The orignal 30GB Video iPod can get an additional 3hrs of video playback a total of 5hrs when the brightness is completely dimmed. To completely dim the backlight during video isn't great because its pretty dark. So I suggest you dim to 1/4 brightness and you will most likely get between 3.5 to 4hrs of video playback. Right now I'm testing how much battery life I would get with the backlight dim to 1/4 brightness and so the results coming out great I played a 2hr 40min movie with 1/4 battery life left. I'm hoping I get an additional hour.
The new 30GB iPod has a 3.5hrs of video playback with the brightness at max. So the new 30GB Video iPod gets an ugrade of 1.5hrs of video playback, that can probably go up to 6.5hrs of video playback with the brightness completely dimmed.
I did this test to ease the pain of those who just bought the orignal 30GB iPod and then find out days later that Apple to released an upgrade 30GB Video iPod. So if you want extra video playback just dim the brightness on the backlight halfway and you will get around 3.5hrs of video playback instead 2hrs.

CHOPPY video playback of videos taken with Kodak Zi8 using Quicktime 7

I've tried everything I possibly could (hence joining this forum), but for some reason, my laptop OR desktop computers will NOT play the videos taken with my Kodak Zi8 portable HD video camera, without the videos being dark, and EXTREMELY CHOPPY, using the Quicktime 7 player! Both computers are very capable of playing HD video (720P), so that's not the problem. I can use VLC Media Player, or the media player that came with the Kodak Zi8 (Media Impression media player), and the playback is extremely smooth & bright, even at FULL SCREEN. I thought it had something to do with "h.264", but Apple says that codec is part of QT7. Any suggestions? I greatly appreciate it! Thanks! : )

I'm having the exact same problem. I have the Kodak Zi8 as it outputs a .MOV file and the result in Quicktime is choppy/stuttery playback. The Fip UltraHD camera does the same thing. I would really like to use quicktime rather than the Impressions player, but for now that's all we can use, and it looks great I just wish Quicktime would look this good. Hopefully we will get a helpul reply on this issue.

Browser to flash HD Video playback stutters on Atom-ION based PC

When ever I try to play video in hd, the video playback will stutter. Meanwhile Xbox Media Center can all three videos just fine using the appropriate free video plug-in.
Can the Adobe Flash Player be fixed and optimized to play videos with smooth playback, on the Atom-ION PCs.
Xbox Media Center (Download Free)
http://xbmc.org/download/
Visual Design Of A Photograph - B&H
https://www.youtube.com/watch?v=o9RQ6YPVWhA
Revenge of the Great Camera Shootout 2012 - Part One: Starting With Darkness
http://vimeo.com/42806211
AUSTIN CITY LIMIT Edward Sharpe & Magnetic Zeros / tUnE-yArDs
http://video.pbs.org/video/2328499265/
HULU
http://www.hulu.com/
http://www.zotacusa.com/zbox-hd-id34-blu-ray.htm
Model
ZBOXHD-ID34BR-U
Assembly Configuration
All-in-one + Optical Drive (no OS)
CPU Integrated
Intel Atom D525 1.8 GHz Dual-Core
Chipset
Intel® NM10 Express
Cooler Type
Fan (Single Slot)
Onboard Video
Next Generation NVIDIA® ION™ (w/512MB DDR3 memory)
Onboard Audio
Onboard analog stereo high-definition audio/ 7.1-Channel LPCM digital audio (HDMI)/ Optical Digital S/PDIF audio output
Onboard LAN
10/100/1000Mbps, WiFi 802.11n/g/b
Memory Size
1 x 2GB Installed (Up to 2 x 2GB)
Memory Slots
2 x 200-pin SO-DIMM
Memory Type
DDR2 800 SO-DIMM
FSB
800 MHz
OS Name
Microsoft Windows 7 Home Premium
Version
6.1.7601 Service Pack 1 Build 7601
Flash Player Version: 11.9.900.170
Browser : Firefox 25.0.1

Can you say even more about what it is you want to do? I mean, what will the application do, not what are the technical aspects of how it will work?
For a point of comparison, look at this thing I did:
http://www.cartoonnetwork.com/mixit/
If you try out the Make page, both the template ones and the from scratch one, as well as the View page to see the playback unit in action. Is what you're going to do anything like that?
I have tried the playback part of this as a mobile app, and it so very nearly works ok! Amongst the many problems are that the overall data rate needed is quite high, and mobile devices aren't as consistant or high bandwidth as desktops, the external swfs often need code in them, so that rules out iOS, and to do the layering involved rules out H.264.
At some future time there will hopefully be StageVideo that can use H.264, but I don't know when that will be, or whether it will be responsive enough (FLV is much faster to connect to and play than H.264).
Incidentally, even in the Objective-C world you can't lay things on top of the standard iOS H.264 player. To do that you have to use the AV Foundation class, so it's fairly low level programming. Using FLV in Flash is a lot easier!

Windows 10 Video playback issues

I have an HP Pavilion g6 and currently use Windows 8.1 OS. I recently upgraded to Windows 10 and had major problems playing videos coded into my own website and on other main stream websites too - YouTube videos were not such an issue. Depending on which internet browser I used, I would either experience a dark green screen and perfect audio or black screen with perfect audio or most frequently, on Chrome, I was gettng hesitant/jumpy video playback and a loud buzzing noise on audio. Neither Microsoft Support nor Windows Support were able to help me and the final piece of advice was to go back to my old OS, which I have done, and wait for an any future updates!! Great help! Has anyone else experienced this issue and have a solution? I have tried a number of suggestions, including changing the settings option to gpu rendering from software rendering but no joy. I'm not a particularly technical sort of person so please go easy on me with your replies. Many thanks Steve

Just wanted to circule back and close the loop. My issue have been resolved. It was the driver for the audio. After updating all of the driver (via Intel and HP) nothing appeared to work and I virtually went through all of the devices and check the driver. It was then that I noticed that IDT High Definition audio codec was very old, dated back to 2012. So I did a little research and came upon this post (http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_devices/idt-high-definition-audio-codec-not-working-on/570a5038-e48e-43f3-af75-95da61447c87?auth=1) The instruction from 3Juan was very specific and solved by problem. It's as follow. I had a same problem on HP Envy 23 1080jp All in one desktop PC.I can solved as following.1. Select IDT High Definition Audio CODEC on Device Manager.2. Select Driver tab.3. Click Update Driver... button.4. Select -> Browse my computer for driver software.5. Select -> Let me pickup a list of device drivers on my computer.6. Select High Definition Audio Device (Not IDT High Def... this is important.) and click Next. Appears Warning message, but reply Yes.7. ! Windows has successfully update your driver software.Key is step 6. Cheers!

Can't hear recorded sound during video playback

I take a lot of videos of my kids. I have noticed lately that the volume is low or muffled...you can't hear what is being said even if they are screaming 6 inches away. I thought maybe something had gotten into the microphone, etc. I recorded a voice memo and on playback i could hear what was recorded just fine at a normal level. Now once I tried to record a video of my kids talking, it played back so low that i can't hear anything and that is with the volume turned wide open. Not really sure what this issue could be but if the volume works fine on voice memo wouldn't it work the same on video playback?

Hi there AmPriSi,
It sounds like you may be experiencing a microphone issue with your iPhone. Use the following article to help you address this issue:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

ITunes / Windows Video Playback.. (what, you actualy want to WATCH vid's?)

I'm sure there are several people out there that are having the same or similar problems, but because I can't seem to find them with the exact problem I'm having, I thought a new thread would be appropriate....
Upgraded from 6 to 7 yesterday... music seems to play OK (not as good as 6, but not all the issues other people are having). Now video playback in iTunes is little more than a slideshow with audio to (almost) match.
When I go to play back any vid podcast, or other video in my library for that matter, iTunes bumps my processor up to 100% and holds it there, and the video does little more than skip and bounce through the entire playback (even if the overlay controls go away fully, the slightest mouse movement brings them back). The audio quality seems to almost follow the video, but they get away from each other (the audio was about 2 seconds ahead of the video/slide show while watching the current version of Photoshop TV). Any other video player works fine, but if I wanted to use them, I would have never installed iTunes in the first place, the idea being that the integration was the blessing.
I USED to be able to watch a video, use Photoshop CS2, have Flash 8 open behind it, After Effects running on a seperate monitor, browse the web, and play freecell all at the same time, with several background utility style apps going all at the same time with out a hickup.
After trying the IDE fix's, the sound setup fix's and any other fix's found in the discussions (and yes, reverting them after they failed to fix the problem), I'm still having an issue, and now I can't find iTunes 6 to try to get back to a good time in life... oh why oh why apple, why do you have just as many issues as windows? I had hoped for so much more....
Anyone? Any Ideas? Anyone willing to email me itunes 6 so I can get back to a better time in life? Or provide answers? I've got a horriable track record with apple (over 20 business stopping questions, and to date 0 responses) so I am about 2 minutes from giving up
Sorry apple, but this is way past frustrating... were all your win/tel beta testers using mac's?
HomeBuilt Windows XP Pro ATI 9700 Pro / AMD Athlon 64 3800+ / hampster on treadmill running his head off...

Are sure that's not Flash needed for those videos?

How can i monitor network traffic to debug video playback issues from a NAS?

I am having problems playing videos on my new Mini that i am using as an HTPC.
I have a brand new Mac Mini running Lion with a 2.7 i7 processor and 8GB of RAM with a wired connection to a switch. .
My switch is a NETGEAR ProSafe GS108T-200NAS set to default settings. I haven't had a chance to start messing with VLAN settings or anything else. There is a bit of a learning curve on my part on this end.
My NAS is a ReadyNAS Pro (RNDP6000) with 3 x 1 TB hitachi ultrastar (HUA722010CLA330) drives and a 1.5 TB seagate (ST31500341AS) drive setup in RAID config using X-RAID2.
The problem I am having is video playback when accessing large video files off of the NAS. These are typically 1080 HD mkv files.
I have tested movies as small as 7.5GB with only slight stutters on occasion. I tried a 10.5GB movie and the stalling was much more pronounced. Movies larger than 11GB are completely unwatchable stalling every minute or so.
I have also tried large movies on the local drive and that is not a problem at all - they play back just fine. Beautiful playback in hidef. Mind you, some of these are the same files that were stalling over the network.
I have also noticed that some other network devices get kicked off the network when a movie is playing.
I think it has something to do with the transfer speed of files over the network and the switch - i am no expert at this mind you.
I am wondering if there is some sort of utility that i can use to monitor network activity on the mini so that i can fix my problem. Or has anyone made chages in their switch settings to optimize data trasfer speeds.
Any advice or recommendations on.
Thank you all!

OK, I did a couple of things and ran things a couple of times.
First what I did settings wise:
I enabled jumbo frames on the Mac Mini, ReadyNAS Pro, and the Netgear GS108T switch. All with MTU set to 9000.
I went ahead and enabled jumbo frames on the rest of the computers on the network just in case.
After these changes I ran into the same problems with videos timing out - very annoying and frustrating as you can imagine.
Then I started playing with device configurations. My original configuration was NAS > Netgear switch > Mac Mini. I went ahead and switched the switch to an Airport Extreme I have as my WAP and the setup looked like this - NAS > Airport Extreme > Mac Mini.
Well, long story short, no go. It appears to me that the NAS is the one having issues providing the necessary data at the proper speed. I also tried playing sopme movies off of the NAS onto a desktop i have and had the same issues - choppy frames and crashing movies. I even tried connecting wirelessly to see if that would work.
BTW, I have the Mac accessing the file system using CIFS.
I don't know what else I could do.
I am going to have to go to the Netgear forums to see if i can figure this out. Hopefully, I can get things going to be able to help some people out.
If anyone has any ideas, they would be greatly appreciated.
My only other alternative is spending $2000 for the thunderbolt capable NAS that Apple sells - it's only money!
Cesar

Apple TV 2 choppy video playback when mirroring from Macbook Pro (Yosemite) and Macbook Air (Yosemite) but not iOS devices

Video playback is choppy (cuts out every 30-45 seconds) when air playing from both my MacBook Air 1.3 GHz Intel Core i5 running Yosemite and my husbands new MacBook Pro, but runs perfectly when mirroring from any of our iOS devices (iPhone 6+, iPad mini 3, etc.) We have Apple TV 2. This problem just started a few weeks ago, was working fine around Christmas. The problem seems to have coincidentally started right after our son tried plugging in and setting up his Chromecast on our tv. I disconnected the Chromecast, but we still have the problem. All of our software if up to date and I've tried disconnecting blue tooth, we do not have a microwave and our wifi network has a very strong signal. We have an Airport Extreme base station. Is there a solution to our problem?

Hi leahmturner,
I see that you are experiencing an issue with choppiness while AirPlay Mirroring from your computers to your Apple TV. I have an article that contains some helpful troubleshooting steps for you regarding this issue:
About AirPlay Mirroring in OS X - Apple Support
http://support.apple.com/en-us/HT201343
Optimizing image quality
Resolution matching modes
You can choose between two desktop resolution matching modes that let you select which display will have the best image. When AirPlay Mirroring is turned on, select an option under "Match Desktop Size To:" in the AirPlay Mirroring menu extra.
Match Desktop Size To: Apple TV
AirPlay Mirroring changes the desktop resolution to best match your Apple TV, resulting in a 16:9 image that fills the HDTV screen. This setting often produces the sharpest image on the HDTV. The aspect ratio and/or resolution of the built-in Mac display may change to accommodate the Apple TV.
Match Desktop Size To: This Mac
AirPlay Mirroring scales the contents of the desktop to fit on the Apple TV, leaving the resolution of your Mac's display unchanged. Use this setting for the sharpest image on your Mac's display. Depending on your Mac model, the resulting image may not fill the HDTV screen.
Troubleshooting AirPlay Mirroring
If you don't see mirroring options
If your Mac and Apple TV are on the same network, but no AirPlay Mirroring menu appears, your Apple TV may be asleep. Simply press a button on your Apple TV remote to wake it up. After a few seconds, the AirPlay Mirroring menu extra appears. If you still don't see the options you expect, make sure your Apple TV has the current software update installed. Also make sure that you have the "Show mirroring options in the menu bar when available" option selected in the Displays pane of System Preferences.
If the menu bar or Dock is cropped
Some HDTVs have bezels that cover a small percentage of the screen. This can result in a slight cropping of a full-resolution HDTV image. Depending on the HDTV model, AirPlay Mirroring may automatically adjust the picture size to prevent cropping. If you are using OS X Mountain Lion or later, and you see cropping of the menu bar or Dock when using AirPlay Mirroring, toggle the Overscan correction option in Displays preferences.
Minimize video post-processing
HDTVs often apply picture quality enhancements intended to improve the look of film and video sources. In some cases, these enhancements can lead to over-sharpening artifacts when displaying your Mac desktop. Some HDTV models have built-in settings to change or disable the enhancements for use with a computer (computer, presentation, or game modes). Otherwise, the controls for sharpness, detail enhancement and noise reduction can be used to optimize the appearance of the Mac desktop. Consult your HDTV’s manual for guidance on the appropriate settings for use with a computer.
Firewall security settings
If you use a firewall, make sure the following firewall security options have been set to allow AirPlay Mirroring to work:
Choose System Preferences from the Apple menu ().
Click Security & Privacy, then click Firewall.
Click the lock icon to unlock it if it's locked, then type an administrator name and password.
Click Firewall Options.
Deselect (uncheck) the “Block all incoming connections” checkbox.
Select (check) the “Automatically allow signed software to receive incoming connections” checkbox.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Video playback from Final Cut Pro studders over HDMI

I have a problem playing back video from FCP. The video output will studder during horizontal pans when I output via HDMI. The audio output is not affected.
I have been playing video successfully using FireWire for output in FCP, however, my new video switcher system will not support FireWire output.
What are some possible causes of this problem?
System stats:
* Mac Mini (2010 model)
* 8GB RAM
* OS X 10.6.4 (Snow Leopard)
* Final Cut Pro 7.0.3 (Final Cut Studio 3)

@ Studio X : The files were originally created with Final Cut Pro, rendered out to QuickTime, then are being played back with Final Cut Pro. The file that has the most noticable studdering is a 60-minute timeline sequence in Final Cut. All files are being stored and played back from the Mac Mini's internal hard drive. Everything was originally shot on DV and formatted for a 4:3 aspect ratio.
@ Shane Ross : Are there any settings in the MacOS or FCP where I can improve the HDMI video signal? Or do you know of / have any experience with Firewire to HDMI converters? Unfortunately, my new signal path relies on HDMI from the video playback.
My current setup uses the Firewire output, which is then converted to composite video & analog audio using a pair of ageing DV tape decks. That setup is becoming troublesome due to age.

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

How do I stop my itunes video playback from skipping

We just bought a full season of a show and while trying to watch it the video playback is either really slow or it stops and skips while the audio keeps playing. Any suggestions how to fix?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Multiple video playback issues

Hi All,
I would dearly appreciaty any light anyone could shed on this issue - I have run into a couple of Flash bugs that have stumped me for quite a while, and my deadline is aproaching fast.
Essentially, I would like to play back 3 reasonably high res videos (On2 VP6-S) simultaneously in one Flash App (using flash.video, netstream and netconnect - code only). Unfortunately, when I do this, the video playback drops a lot of frames, however, CPU usage does not go much above 50% - spread over both cores. I'm using a Core2Duo. If I play the same 3 videos simultaneously in 3 separate flash apps (FP10), they play much better (and use close to 100% CPU). I even tried creating it as an AIR app with 3 separate windows (NativeWindow), but that made little difference. I have lodged this as a bug via the Flash Bug Reporting System (http://bugs.adobe.com/jira/browse/FP-2341).
And yes, I do need to be doing something as crazy as this - it is for a pretty cool kiosk app, so I know what hardware will be used (and it has a good Graphics Card).
One promising workaround appeared to be playing back a single NetStream in multiple Video instances, as it is NetStream that does the decoding, so I could decode once and present it in 3 places. Two of my video objects are actually the same flv (on different monitors), so there would be a 33% saving right there. If necessary, I could encode both flvs into a single 1920x1200 flv (I've checked - it would play back ok) and then use video.mask to show the relevant bits.
However, another bug has been reported at http://bugs.adobe.com/jira/browse/FP-920 saying this does not work - Video in the object that last called attachNetStream(ns) will play, all others will freeze. They do mention a workaround that gets both videos to play - reset the size of freezed videos on ENTER_FRAME event. However, I cannot get this workaround to work - my first video is empty (not even frozen).
So there are a couple of things I would love any feedback on. Firstly, if anyone has insights on how I could get this to work. Secondly, if anyone could try the "multiple videos on one netStream with workaround" code below (simply copy, paste and point to a relevant flv) and let me know if it works and the versions of software they used, I'd be very thankful.
---------------Code Begins-------------
import flash.events.Event;
import flash.media.Video;
import flash.net.NetConnection;
import flash.net.NetStream;
showRedrawRegions(true); // both the placeholders and the entire window redraws every frame.
// When only video1 is attached, only video1's region is redrawing
// When both videos are attached, both video's regions are redrawing, BUT video1 is empty.
trace ("Capabilities.version = " + Capabilities.version); // = WIN 10,0,22,91 // in Flash CS4 10.0.2
//var nc:NetConnection = new NetConnection( null ); // Got Eror: 1137: Incorrect number of arguments. Expected no more than 0.
var nc:NetConnection = new NetConnection();
nc.connect(null);
// Connect nc here ...? Unnecessary in this case?
var ns:NetStream = new NetStream(nc);
ns.client = new Object(); // Simplest way to deal with cuePoints and metaData by doing nothing. For more, see http://blogs.adobe.com/pdehaan/2006/07/playing_back_flvs_with_actions_1.html
var stream:String = "test.flv";
var video1:Video = new Video(); // Defaults to size of 320x240
var video2:Video = new Video(); // Defaults to size of 320x240
video2.x = 320;
addChild(video1);
addChild(video2);
ns.play(stream);
video1.attachNetStream(ns);
video2.attachNetStream(ns);
// PROBLEM: Video in the object that last called attachNetStream(ns) will play, all others will freeze.
// See WORKAROUND below for solution:
//WORKAROUND to stop the first split stream from freezing:
addEventListener(Event.ENTER_FRAME, onEnterFrame);
function onEnterFrame(e:Event){
video1.width = 320;
video1.height = 240;
trace ("video1.videoWidth = " + video1.videoWidth);
trace ("video2.videoWidth = " + video2.videoWidth);
// When only video1 is attached, video1.videoWidth = 1920, video2.videoWidth = 0
// When both videos are attached, video1.videoWidth = 0, video2.videoWidth = 1920
---------------Code Ends-------------
Letting me know what exact versions of the following software was used would help a lot:
- Windows/OS (e.g. XP SP3).
- App code was written in. (e.g. Flash CS4 IDE 10.0.2, Flash Develop 3.0.1).
- App code was compiled in. (e.g. Flash CS4 IDE 10.0.2, Flex SDK 3.4.0.6955).
- Type and Version of Flash Player used (e.g. Standalone Debug Flash Player v10,0,22,91).
The versions I used are listed above.
Lastly, for what it is work, I found three interesting/informative results, but they didn't help me:
- When only video1 is attached, video1.videoWidth = 1920, video2.videoWidth = 0
When both videos are attached, video1.videoWidth = 0, video2.videoWidth = 1920
- When only video1 is attached, only video1's region is redrawing
When both videos are attached, both video's regions are redrawing, BUT video1 is empty.
- var nc:NetConnection = new NetConnection( null ); // Got Eror: 1137: Incorrect number of arguments. Expected no more than 0.
So I had to change it to:
var nc:NetConnection = new NetConnection();
nc.connect(null);
Does this mean my NetConnection class is different and maybe incompatible with this workaround?
Many, many thanks,

How to view/hear pretty much everything:
Assuming you already run OS 10.4.9 or above and have Quicktime 7.2, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer from http://uk.real.com/player/
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
Adobe FlashPlayer from http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
In Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
The world should now be your oyster!
You should also have the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

What is the best Compressor setting for best quality video playback on an iBook g4?

I know the iBook and G4's in general are very outdated today, but I need to ask anyways. I have some video projects in 720p and 1080p in which I have down converted to 480p and also exported to MPEG-2 for DVD (personal wedding videos and videos made for my clients using Final Cut Studio). Anything encoded at most resolutions using h264 won't play on my iBook. Even 480p.
I have about 20 hours of mixed video content that I need it in a format that is suitable for an iPhone 4 and an iBook 12" with a 1.2GHz G4, 1.25GB RAM and I added a 250 WD 5400 IDE hard disk (running 10.5.8 and 10.4.11 for Classic Mode). I know the iBook doesn't seem like the best tool for modern video playback, but I need to figure out which setting will play best with iPhone 4 and iBook so I don't need to make 2 local copies of each video for each device.
The iBook plays best with the original DVD output MPEG-2 file and playing back in QT Pro or VLC... but I already have 180 GB's of MPEG-2 files now and my little HD is almost full. I don't have enough room to convert all the iPhone 4 counterparts. If I use Compressor 3.5.3, what is the optimal setting for iBook and iPhone .m4v or .mp4 files that can play on both devices? So far 720x400-480 widescreen videos @ 29fps works great on my iPhone, Apple TV 2, and other computers but seems to murder my poor iBook if encoded with high profile (and still choppy on simple profiles). 640x480 (adding black matte bars to my videos) plays fine in MPEG-2 but drops frames or goes to black screen if I convert it to mp4 (and looks bad on the iPhone 4 because of the matte). But if I convert on any of the simple profiles, it looks terrible on my iPhone 4 and a blocky on the iBook.
This is the problem leading me to having 2 copies of each video and eating my hard disk space. What is the best video setting for both playback on the iBook and iPhone 4? Can the iBook playback H264 at all in decent resolutionsat all? I don't really want to have a 480p .m4v collection for the iPhone 4 and a MPEG-2 RAW collection just to play the same videos on the iBook.
Any suggestions are greatly appreciated! Thanks!

Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
Is there an easier way?

Video Playback Dark

Similar Messages

Maybe you are looking for