Video playback issues -- no audio through interface

Recently, I've just noticed that some applications will playback through my Tascam US-1800 and others won't. Most of the apps I use it for (recording, Band in a Box, iTunes, etc.) have no trouble But I've only recently noticed that apps such as VLC, the Leaping Brain video playback app for streaming content, and Youtube on Safari will only work using the internal speakers. I've seen a number of complaints about Safari's compatibility with Youtube (and none of the half dozen or so fixes I've tried have not worked, such as unchecking the 32 bit box in the Info box, or the HTML5 issue).
In the case of Leaping Brain (Purple Software) there is an option to use Quicktime instead as a workaround, and that works just fine throught the interface.
I thought flash might be an issue, but the tech at purple software says they don't use Flash. Their app supposedly uses whatever is the "default" device. That's only true if it's set for internal speakers, not true if set to us-1800.
I had this issue with Mozilla too, but Chrome works just fine--youtube and other audio comes through the interface loud and clear.
I did search posts for something similar, but there seem to be a LOT of similar, possibly related issues, but none suggesting why this would be happening. I should had that the drivers for the us-1800 are updated for Mountain Lion, and everything else is up to date as well. So, if this is an issue raised and solved before, I apolgize, but I didn't see it.
Thanks,
Tony
iMac 27" (late 2012)
OS 10.8.5
3.4 GHz corei7
16GB RAM

Is the AVR set to 720P or 1080P for output? Use the resolution button on the front of the receiver to adjust.
Depending on what it is set to, the ATV needs to be set to the same setting.
The ATV does not support 1080i, if the receiver is set to that, change it.
Might be as simple as changing the HDMI port the ATV is connected to on the receiver.

Similar Messages

Video playback issues in Air for Android

Hello everybody
I am developing an advertisement application which plays multiple videos. I have faced a very strange problem: nor the simple Video nor the StageVideo are not visible when I run the app on target android device. I can hear the audio but the only way to get the video is to press back button and then get back to app but in this case the video goes over the UI. This happens only on a target device which is a chinese sibo android tablet. It has android 4.1 on board. I have seen a lot of people had the similar issues:
http://forums.adobe.com/message/5429125
but the solution mentioned there - adding <containsVideo>true</containsVideo> to the manifest xml doesnt help
I am using adobe air 4.0 sdk and the air 4.0 runtime on the device. I have tried to change renderMode to CPU/Direct/Auto but it doesn change anything.
The other three android devices I have - toshiba thrive tablet(4.0.4)/ eken tablet(4.2.2)/ htc desire c(4.0.3) play all the video content without any problem.
Any advice will be highly appreciated,
Max

Hi, Chris,
I think this issue: Bug#3832525 - [Android] Video + Stage3D = Video don't work but sound continue playback
Also there is many critical video playback issues:
Bug#3759420 - [Platform_Windows] GPU accelerated video stop playing when screen resolution changes after NetStream.Buffe…
Bug#3810201 - [Android] H.264 video rotating problem
Bug#3503389 - [Platform_Android]StageVideo attachCamera()
Bug#3802932 - [iOS] Video stops playing
Bug#3840986 - [iOS] Simple Video object doesn't work with H.264 (MP4) videos
Bug#3779843 - StageVideo + NetStream + Starling = R6025 Error
Bug#3626740 - H.264 playback conflicts with Stage3D (Android)
Bug#3832327 - [Android] NetStream decodedFrames don't work
Bug#3832141 - Video is not working if you seek on NetStream.Play.Stop and have a bufferTime
Bug#3810979 - AIR on iOS: Using StageVideo makes 2D Display objects opaque/black over Stage3D
Bug#3578045 - new Video() android black screen
Bug#3703836 - Black screen on Samsung Galaxy S4 and Nexus 7 device
Bug#3837870 - [iOS] StageVideo + Stage3D = video not displaying but sound playback
Bug#3840983 - [Android] Returning from Alarm Clock causes black screen when using Video with GPU acceleration
Bug#3840999 - [iOS] [Android] Turn off screen at NetStream.Buffer.Flush causes video not work or crash with some videos
Bug#3844059 - [iOS[ Switching between multiple NetStreams not work
Bug#3773944 - Video view top at android 4.3
and more
All of these problems very important for our business. Often we cannot create stable AIR applications when we need to use videos.
Could you force for faster fixing these issues?

OS X 10.8 video playback issues

since upgrading to OS X 10.8 I have several video playback issues.
I have a lot of videos ripped to my Drobo NAS, connected bij FW 800 to my MacMini (4 GB, 2009). Until recently, playback was smooth, either with VLC or DVD Player.
Since upgrading to OS X 10.8, DVD Player is not playing VIDEO_TS folders anymore, all I get is a chequered screen. This is also happening on my MacBookPro and my iMac i7, so this is not a specific hardware issue.
After upgrading to OS X 10.8.2, videos are playing back jerky and audio is out of sync in VLC and QuickTime.
Since I have 10,000+ videos in my library, this is absolutely unacceptable
I tried reinstalling OS 10.8, and trashing the prefs, but to no avail.
please help.

Are you running the latest version of VLC player?
http://www.videolan.org/vlc/download-macosx.html
Hope this helps

WINDOWS VISTA ITUNES VIDEO PLAYBACK ISSUE!!!!!! AAHHHHHHH!!! HELP!!!!!!!!!!

am using a Dell XPS GEN 5 PC with Windows Vista Premium Edition as the current OS installed. I have latested up date for Itunes and QuickTime (7.1.6) Installed. I have recently bought and downloaded 3 of the Original Star Trek Tv Shows from Itunes. When I try and play one of them, they don't work. The Screen comes up, the show starts, then stops. Sometimes the sound keeps on playing, and then stops. Sometimes it just dosent even come on. I'm guessing (as a highly advanced Windows PC User) That this ia a "video/playback issue, related to a Apple/Vista Compatibility problem. I would like help solving this problem.

hi slideaway!
my computer has a right proper meltdown, switching itself off and restarting to a "Windows has recovered from a serious error" sort of message.
good lord. are you getting any sort of blue screen? if so, what numerical and text codes are you getting with it? (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
here's a reference on the sorts of things i'm asking about:
Troubleshooting Windows Stop Messages
if you're not seeing a blue screen (or just a flash of one), we can use this technique to make hidden blue screens appear for us:
1) Open your system control panel (Start->Control Panels->System).
2) Select the "Advanced" tab.
3) Click the "Startup and Recover" section's "Settings" button
4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.
love, b

Quicktime 7.6 video playback issues

I upgraded to quicktime 7.6 yesterday and is has caused video playback issues when in higher performance with my Macbook pro. I am trying to play 1080p footage in the h.264 compression codec and it is now stuttering. It played fine in my previous quicktime player before the upgrade and it seems to play fine in the better battery setting. The problem occurs with the 9600 nvidia chip but the 9400 works okay. This is troublesome because the 9600 should out preform the 9400.

Update: The problem only happens with MacOS 10.5.6. Running the pre-installed MacOS 10.5.5 the 9400M and 9600M displays movies smoothly using QuickTime 7.6. Disabling hardware-accelerated playback by deleting the "AppleVAH264HW.component" in "/System/Library/Quicktime" also "solves" the problem.

Video Playback ISSUE WITH VISTA!!!! NEEDED HELP BADLY!!!!!!!

I am using a Dell XPS GEN 5 PC with Windows Vista Premium Edition as the current OS installed. I have latested up date for Itunes and QuickTime (7.1.6) Installed. I have recently bought and downloaded 3 of the Original Star Trek Tv Shows from Itunes. When I try and play one of them, they don't work. The Screen comes up, the show starts, then stops. Sometimes the sound keeps on playing, and then stops. Sometimes it just dosent even come on. I'm guessing (as a highly advanced Windows PC User) That this ia a "video/playback issue, related to a Apple/Vista Compatibility problem. I would like help solving this problem.
-Nick.

Do you have a SATA hard drive? I have the same problem you describe when trying to play videos in iTunes. Do the previews of music videos on the iTunes web site play OK? If they do you probably have the same problem with SATA HD and iTunes incompatibility. Not sure who is going to fix that problem and when. I have found one fix that worked for me. Copy your video(s) to a flash drive and then play them from there. It's a workaround and you shouldn't have to do it but it does allow you to watch the videos.

Audio & video playback issues

So here’s the deal…
I just bought my Mac Pro (3Ghz, 3GB RAM) two weeks ago and have had problems ever since. I’m working with HD video in Final Cut Pro and the audio and video playback is glitching pretty bad. I know that it isn’t a software issue because the video and audio work just fine right after I start up my computer but as soon as I render the project or open another application the issue returns. This problem also occurs in iTunes, Soundtrack and QuickTime. Even the mouse will start to stutter. I have tried just about everything. I have reset the computer, trashed my startup folder (both recommended by Apple technicians) added a new user, reinstalled the system’s software and all the applications.
I also own a PowerBook (1.5 GHz), which works just fine with playing back HD video and audio and actually runs faster then the Mac Pro. I have no idea what’s going in here. Any help would be greatly appreciated. Thanks in advance.

Ok so I'm a bit of a dummy. This issue has been really bugging me so I decided to try a lens cleaner to see if it would help. It didn't unfortunately. I then uninstalled the drive and rebooted rather than scanning for hardware changes. This improved things a bit-I was able to play a cd normally in Media Player but nothing else. I checked the IDE controllers again and the secondary channel this time was running in PIO mode. I uninstalled the sencondary controller, rebooted and voila! The controller reinstalled, is now running in Ultra DMA Mode 2, DVDs and CDs now play fine. Either the lens was dirty and causing time out issues while reading discs which caused the change to PIO or I just missed it when I first checked. Either way, thanks for the help.

A105-S4284 audio/video playback issues

When I play a CD or DVD using Media Player, Media Center, iTunes or InterVideo WinDVD, I get choppy/slow video and slow/choppy audio with popping sounds. When I play video or audio already on my hard drive or stream from the web I don't have this issue. I've tried uninstalling the audio, video and DVD drive drivers, then let Windows find and re-install the drivers/hardware and the problem is still there. I've tried downloading and installing the latest drivers on the Toshiba site for audio and video and still the problem continues. I also dowloaded and installed a much newer but generic video driver from Intel's site and I still have the issue.
Anyone have any other ideas?
Thanks.
Solved!
Go to Solution.

Ok so I'm a bit of a dummy. This issue has been really bugging me so I decided to try a lens cleaner to see if it would help. It didn't unfortunately. I then uninstalled the drive and rebooted rather than scanning for hardware changes. This improved things a bit-I was able to play a cd normally in Media Player but nothing else. I checked the IDE controllers again and the secondary channel this time was running in PIO mode. I uninstalled the sencondary controller, rebooted and voila! The controller reinstalled, is now running in Ultra DMA Mode 2, DVDs and CDs now play fine. Either the lens was dirty and causing time out issues while reading discs which caused the change to PIO or I just missed it when I first checked. Either way, thanks for the help.

Video playback ISSUES in iTunes

Hi, All.
I've recently purchased a music video and a movie from iTunes to play strictly in iTunes--I don't have a video iPod.
I had assumed that these videos would playback smoothly with the iTunes software, but I was OH-so-wrong.
At first, the all I could see of the video was a halting, pastel-shaded blob. I consulted the Knowledge base, and did everything listed here: http://docs.info.apple.com/article.html?artnum=303706
Now, I can see my videos, but they are halting and out of sync with the words. I've upgraded my video drivers, display settings, and just about everything else I can think of, but I still do not have seamless video playback.
Any ideas? Suggestions? Remember, I have done everything listed in the above link.
Thanks for your time and help!
K7N2 Delta L w/2.2 Ghz AMD Windows XP Pro

"Now, I can see my videos, but they are halting and out of sync with the words. I've upgraded my video drivers, display settings, and just about everything else I can think of, but I still do not have seamless video playback."
Hey Feenix,
So, what version of iTunes is running on the computer? 7.0.2.16? Also what version of Direct X is installed on the computer?(goto Start> Run> dxdiag)
This article: http://docs.info.apple.com/article.html?artnum=93610 will help troubleshoot audio issues. The article will have you edit "Sounds and Audio Devices" through Control Panel; make sure Sound Playback Default Device is set correctly(under Audio tab.)
Jason

Video Playback Issues With Apple TV3 Running OS8

I have two Apple TV3s (Both Pre 2013)
One updated today to the latest OS8, the other still running the previous OS7.1.2
Now when trying to play virtually any of my own MP4 videos the OS8 firmware version Apple TV3 refuses to play the file.
Apple TV simply displays "An error occurred loading this content" (retrying simply displays the same error again)
If I then use the second Apple TV3 (running the older firmware OS7.1.2) and try to play exactly the same files from the same iTunes library the file will play back correctly.
So far the OS8 Apple TV3 is unable to play over 95% of the video files it could previously play prior to the firmware update.
The odd file will play but these files are of differing resolutions so don't appear to share anything in common. It is always the same files that will or wont play.
All video files are Profile 4.0 or lower and contain the required audio tracks.
I am running iTunes 11.4.0.18 (Windows 8.1)
Prior to the update every video file played correctly (on both Apple TVs) and the second Apple TV3 (using the earlier OS7.1.2 firmware) still plays the exact same files correctly.
Music files are unaffected and playback correctly on both Apple TV3s.
The latest firmware update appears to have corrupted the video playback of the Apple TV3 in some way.
I have even tried a complete USB restore of the OS8 Apple TV3 but this has made no difference.
Has anyone else experienced MP4 playback issues since updating their Apple TV3 to OS8?
Thank you in advance.

After further tests it would appear that Apple TV 7.0 (OS8) firmware is unable to play any video file with NO CHAPTER markers.
If I use MetaX to simply tag an unplayable MP4 file with a single chapter, that file will now play correctly using an Apple TV3 running Apple TV 7.0 (OS8). If the single chapter is then deleted the same file reverts to being unplayable.
In previous versions of Apple TV firmware any video file with NO CHAPTER markers could be played correctly and the Apple TV would automatically generate chapter markers at equally distributed time gaps.
For some reason Apple TV 7.0 (OS8) firmware appears to have removed this auto chapter marker feature so if a file has no chapter markers the Apple TV will now consider the file as invalid.
With MetaX it is possible to manually generate additional chapter markers so you can still skip through the file rather than only scan.
iFlick for Mac should I suspect be able to do the same thing.

Video Playback issues with Ipod and Itunes

OK I just bought some episodes of a TV show last night, and I put them on my ipod(5th gen. 30GB). About halfway-sometimes 2/3-of the way through, the video stops playing, no audio, no movement, just stops like it is paused. I deleted them off my ipod, made sure my ipod was up to date, and put them back on. Problems still there. Then i went to watch them in Itunes, and in the same places they freeze again. Itunes is up to date too.So now i have these videos that i paid for, that don't work completely on either my Ipod nor on Itunes. Help Please?

the good news is that you have pretty much isolated the issue. if the videos don't play completely on either the ipod or itunes, then the videos or tv shows are possibly corrupted. what you can do is contact the itunes store via a web form ( click here to go to form and scroll to the bottom)
tell the itunes store your tv shows have playback issues and say the same thing you posted. the itunes store should allow you to re-download the tv shows.

Windows 10 Video playback issues

I have an HP Pavilion g6 and currently use Windows 8.1 OS. I recently upgraded to Windows 10 and had major problems playing videos coded into my own website and on other main stream websites too - YouTube videos were not such an issue. Depending on which internet browser I used, I would either experience a dark green screen and perfect audio or black screen with perfect audio or most frequently, on Chrome, I was gettng hesitant/jumpy video playback and a loud buzzing noise on audio. Neither Microsoft Support nor Windows Support were able to help me and the final piece of advice was to go back to my old OS, which I have done, and wait for an any future updates!! Great help! Has anyone else experienced this issue and have a solution? I have tried a number of suggestions, including changing the settings option to gpu rendering from software rendering but no joy. I'm not a particularly technical sort of person so please go easy on me with your replies. Many thanks Steve

Just wanted to circule back and close the loop. My issue have been resolved. It was the driver for the audio. After updating all of the driver (via Intel and HP) nothing appeared to work and I virtually went through all of the devices and check the driver. It was then that I noticed that IDT High Definition audio codec was very old, dated back to 2012. So I did a little research and came upon this post (http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_devices/idt-high-definition-audio-codec-not-working-on/570a5038-e48e-43f3-af75-95da61447c87?auth=1) The instruction from 3Juan was very specific and solved by problem. It's as follow. I had a same problem on HP Envy 23 1080jp All in one desktop PC.I can solved as following.1. Select IDT High Definition Audio CODEC on Device Manager.2. Select Driver tab.3. Click Update Driver... button.4. Select -> Browse my computer for driver software.5. Select -> Let me pickup a list of device drivers on my computer.6. Select High Definition Audio Device (Not IDT High Def... this is important.) and click Next. Appears Warning message, but reply Yes.7. ! Windows has successfully update your driver software.Key is step 6. Cheers!

Video playback issue with 3rd gen iPod Touch

Hi all,
I just recently discovered an issue with my iPod touch 3rd generation video playback. The issue just reared its head today and I have no idea what I could've done to cause it. It's a small issue but frustrating enough to cause a problem.
If I watch a video normally (by opening up the Videos section and picking it), it'll play through to the end, then start over again, then stop. This only happens if I choose videos randomly, and doesn't happen if I play videos in a playlist.
What could be the issue?

I'll second that. I've been having the same problem since the last software update

Video playback issue in Presenter 9

Hi
I have Office 2013 and Presenter 9. Everything works as outlined in the various tutorials etc but there is no video when I run the presentation.
I get audio only.
Is it a video format issue? What is best?
Thanks
Scott

Are you inserting the video through the Presenter Insert Video function or through the PPT Insert Media function?
Presenter will convert all supported video formats into FLV, except MP4, which it leaves as MP4. If you can have your video in either FLV or MP4 before inserting into Presenter, then it leaves Presenter's video conversion tool out of the list of possible problems, and you retain more control over video quality settings.

Video Playback issues in HTML5 using IE10

Hello All:
We built a project in Captivate 6 and published it to HTML5. The project contains two videos that were converted to MP4.
When running the program in Chrome, all works as expected. However when running in IE10, no video is played. Any solutions?

I am also having a similar problem with slide videos in HTML5 projects. The video plays as it should when the slide is viewed for the first time. However, if the slide is revisited later, the video does not appear and no audio is played - there is just an empty space where the video should be.
In addition, when the slide video is finished playing, it will automatically restart, replay the first 1-2 seconds of the video, then stop. Neither of these issues occur when publishing the same presentation as a SWF, but I am developing for iOS devices and really need the HTML5 output. These issues also do not occur if I insert the same video file as an event video instead of a slide video; however, I need the users to be able to pause video playback, and it seems slide videos are the only way to provide that control in HTML5.
Here's what I'm using:
Captivate 6.0.1.240
All videos are .mp4
HTML5 output tested in latest versions of Safari and Google Chrome with the same result.
Any ideas or help would be greatly appreciated! Thanks.

Video playback issues -- no audio through interface

Similar Messages

Maybe you are looking for