Video playback = periodic restarts

Recently, my video iPod has started to restart/reboot itself in the middle of video playback.
This only happens occasionally, not all the time. Maybe every 30 minutes or so.
I don't have any videos from the iTunes Store -- these have all been encoded by me using Handbrake -- so it's nothing to do with authorization.
I've already wiped it and reloaded everything again, and yet this still happens.
Sounds to me like it's a hardware bug or something, but I wonder if there are any other solutions out there. Any help would be much appreciated.
Thanks!

From the terms and conditions of this forum:
+*Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.*+

Similar Messages

Video Playback Dark

Whenever I playback video using Quicktime, or in Final Cut Pro, just video playback period, videos are always very dark, and details hard to see. When I playback the exact same video (trailer from apple) then it plays back fine and with brightness and detail on a Cinema Display. Is that natural? I have a MBP with Glossy Screen.

Ron, this is slightly confusing to me:
+Whenever I playback video using Quicktime, or in Final Cut Pro, just video playback period, videos are always very dark, and details hard to see.+
So for the above, I assume (from what you say in the second sentence) we are talking about video trailers from Apple, correct? Here is your second sentence:
+When I playback the exact same video (trailer from apple) then it plays back fine and with brightness and detail on a Cinema Display.+
So are you saying that you are not using Quicktime or FCP when you play back the "exact same video trailer" that you played the first time with bad results? What program are you using when the Apple video trailer plays back fine?
Sorry to just be asking questions without providing any advice or solution, but I am trying to understand better.

Sony HDV Walkman not seen for video playback

Hello.
Bit of a problem - have just taken delivery of two spanking new Sony GV-HD700E decks to use in our edit suites at work.
Capturing from the decks works like a charm in both HDV (at both 1080i50 and 25p) and DV-PAL (4:3 and Anamorphic). Playback controls are also working fine.
The problem is when I use 'Print To Video' - everything works fine in DV, but unfortunately the settings under 'Video Playback' for all HDV formats are greyed out - I can't get ANY playback in HDV to the deck at all.
I've tried all the HDV Device Control Presets without success (including unplugging the Firewire cables, restarting the deck and the Mac after each change).
The Sony site says the device definitely takes HDV in, so I was just wondering if it's a driver issue?
Any ideas?
Thanks.
Jim
NB - I did plug the Firewire cables back in each time...
OS 10.5.2
FCP 6.0.2
MBP 2.33 and Mac Pro 8-core 3 GHz
Message was edited by: blooblooblum

What that means is you cannot externally monitor HDV without a 3rd party card or box. You can, however, Print to Video with HDV. I've done it successfully with a Sony V1U with FCS 1 (FCP 5.1.4) and now with FCS 2.
If everything is connected and powered up in the proper order, it should work with the same Easy Setup used to originally capture the footage for the project.
It's very important that the camera or deck be connected to the mac via firewire and then powered up before the computer is turned on. After powering up the mac, launching FCP, and opening your project, make sure the timeline window with your finished, rendered/conformed sequence is activated.
Then, go to Print to Video, make your selections, select the 'Start Recording Automatically' box, and hit OK. Your sequence will do some additional conforming, and then your camera/deck should begin to record as the sequence plays out.
In addition, make sure other firewire devices and cables are disconnected during the Print to Video operation. I've done it successfully with other drives and devices connected, but it could cause problems with certain setups.
Message was edited by: Red Jacket Mike

IPod 5G Freezes during Video Playback

iPod freezes during video playback. Does anybody else have this problem?
Usually freezes up about 10 minutes into a video, and then complety locks up. This usually requires 2 to 3 restarts untill it comes back working properly.

Mine does the same. It really only happens to me when I try to navigate thru menus when video is playing. I usually have to do a forced Reset. I truly think that introducing video on the iPod was not ready for primetime as it is very sluggish, buggy and sensitive during playbabck of video. No problems with music whatsoever but I am frustrated with the very finicky video qualities of this thing.

WINDOWS VISTA ITUNES VIDEO PLAYBACK ISSUE!!!!!! AAHHHHHHH!!! HELP!!!!!!!!!!

am using a Dell XPS GEN 5 PC with Windows Vista Premium Edition as the current OS installed. I have latested up date for Itunes and QuickTime (7.1.6) Installed. I have recently bought and downloaded 3 of the Original Star Trek Tv Shows from Itunes. When I try and play one of them, they don't work. The Screen comes up, the show starts, then stops. Sometimes the sound keeps on playing, and then stops. Sometimes it just dosent even come on. I'm guessing (as a highly advanced Windows PC User) That this ia a "video/playback issue, related to a Apple/Vista Compatibility problem. I would like help solving this problem.

hi slideaway!
my computer has a right proper meltdown, switching itself off and restarting to a "Windows has recovered from a serious error" sort of message.
good lord. are you getting any sort of blue screen? if so, what numerical and text codes are you getting with it? (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
here's a reference on the sorts of things i'm asking about:
Troubleshooting Windows Stop Messages
if you're not seeing a blue screen (or just a flash of one), we can use this technique to make hidden blue screens appear for us:
1) Open your system control panel (Start->Control Panels->System).
2) Select the "Advanced" tab.
3) Click the "Startup and Recover" section's "Settings" button
4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.
love, b

Slow/unresponsive video playback, media pending, after CC'14 October update

Encountering a strange issue after the October update. It's a project carried over from the previous CC'14 version, nothing crazy, about an 18 minute timeline of video/.mov clips straight off a JVC GY-HM600U with simple RGB curves/masks on some clips, some Prores422 clips of graphics exported out of After Effects, a couple nested sequences featuring simple text w/ cross dissolves, and a lower 3rd Quicktime with RGB+Alpha. There are some linked AE comps in the project but not in the sequence. Ran fine before update. Here's my system, obviously no CUDA so Mercury Playback is software only:
Upon opening the project everything is fine, playback is smooth, scrubbing from beginning to end no problem. After a period of time, 10-15 minutes? Suddenly video playback hangs up, with audio continuing to play after . Opening a clip in the Source window displays the Media Pending thumbnail, after 15 seconds it seems to find the media but again it's only a still frame with video hanging up. Then audio seems to hang up and I can't do anything. I can still manipulate the UI but scrubbing through the timeline is completely unresponsive, pressing play does nothing.
Quitting the program seems to freeze it, the window closes but it stays lit up in my dock and shows Application Not Responding, causing me to force quit.
A system reboot yesterday seemed to clear the issue up for the remainder of the work day but it's back today. Not sure where the issue is coming from, but seems like some kind of memory leak or something similar since it seems to be a gradual degradation in performance. I'll have to roll back to a previous version to finish up this project until things are fixed.

Hello,
Many thanks for your very long reply and your interest in my problems.
I shall try to answer you :
- 1) OS : Windows 7 64 bits Pro SP1, french,
                 Version : 6.1.7601.18247 (Win7RTM)
                 Framework.NET : 4.0.30319.18408 built by : FX451RTMGREL)
                 DirectX : 11.0,
                 OpenGL : 6.1.7600.16385 (Win7_rtm.090713-1255).
- 2) Yes the media pending goes away but after a couple of minutes (one
year ago I was using PP CS6 and Encore CS6, I never had this problem
even with very long files),
- 3) Yes my GPU driver is updated (Nvidia GeForce 332.21 dated 12/19/2014).
I never had thiese problems with PP CS6 + Encore CS6 and my projects
built with these PP ans Encore version were with the same structure and
length (in PP CS6 : sequences up to 45 minutes, in Encore CS6 chapters
up to the same time).
The difference between are in my hardware :
- the RAM was upgraded from 12 GB to 24 GB,
- the CPU was overclocked from 3,2 GHz (default) to 3,88 GHz).
- 4) I shall try up to the disk burn to check if the problem is just due
to display of "animated buttons".
I hope my answer will be usefull for you.
Regards,
Jacques Gourier.
Le 11/02/2014 19:53, Stan Jones a écrit :
>
      Re: Media pending with Encore CS6
created by Stan Jones <http://forums.adobe.com/people/Stan+Jones> in
/Encore/ - View the full discussion
<http://forums.adobe.com/message/6110278#6110278

No Hopes for SMOOTH Video Playback in Adobe Bridge ?

Hi....
System Specs
MacPro Nehalem 16 CORES
32 GB RAM - 4TB RAID0
Lion 7.2
I have a bunch of video files that I would like to organize via Bridge.
Works ok but video playback is a slap in the face. Looks like jerky slow motion.
I have tried altering from hardware to software rendering. No remedy.
Bridge has been around for a long while and with each release the app actually performs worse.
Menus are ultimately slow in showing up and entering a folder with 16 video files (QT ProRes),
selecting them all, has Bridge freezing for 5 minutes supposedly creating previews.
Completey unuseable for video.... in my world !
So my question is this...
Are their any plans for implementing Video Capabilities in Bridge
or is some kind of 3rd pty. plug-in available that will enable Bridge to playback what ANY other app incl. the QUicklook and Finder can Playback.
Funny thing is that this whole app has been created to BRIDGE between apps created by adobe. If Bridge was a REAL bridge I wouldn't dare cross it.

It has always seemed that Bridge has been the stepchild of Adobe since its inception and that Adobe spends precious little effort and resources on it.
Remember that Bridge was born as nothing more than Photoshop's Browser. Nothing more.
Then, in a straight marketing stunt, Adobe decided artificially to lump together a number of totally unrelated applications into artificial "suites." These are in fact totally non-related applications that were artificially bundled by fiat of bean counters and marketers. The engineering teams for the individual point applications are totally independent from each other and are not only not in in the same building but in different cities, different states and, some, in different countries. They have pathetically little communication among themselves.
The humble Photoshop Browser was renamed Bridge and jerry-rigged to serve as some sort of go-between vehicle among the applications also jerry-ringed into artificial suites. (Definition of JERRY-RIGGED: organized or constructed in a crude or improvised manner <a jerry–rigged plan>.
Don't expect too much from Bridge, and don't complain about it too loudly, or you might find yourself among others who have been told, in effect, that "Adobe doesn't charge you for Bridge." As a "free" byproduct, you get what you paid for.
In this context, just look at what has happened to the value of Adobe stock in the last five years: –28.20% (minus).
Compare that to Apple during the exact same period: +358.43%.
Wo Tai Lao Le
我太老了

Loss of sound and video playback on ENVY X2

Every so often, more often than I would like, my HP Envy X2 loses sound and video playback capabilities; any ideas anybody? The concept of this machine is great and have had it for the past 9 months but this loss of sound and vision is so unpredictable and frustating...

Hi Brumage,
I saw your post regarding the sound and video issues and I will be happy to help. Do you get any error messages when this happens? Have noticed if it is a particular site like YouTube or program that you are using when the issue occurs or does it occur on all programs? When you restarted the Envy X2 does the issue go away?
I would start by suggesting that you make sure all updates have been installed through HP Support Assistant and Windows Update.
What operating system are you running? What is your product number?
Find your product number on a notebook:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00033108
Finding your OS:
http://windows.microsoft.com/en-CA/windows/which-operating-system
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Video Playback in synchronization to data display

I've read a bunch of topics about recording live video, but my question has to do with playback synchronized to a data display. I've got a simple black and white camera (RS170) already. I'm going to get some sort of capture board. I want to record video from this camera to the hard drive. The reason is that this video file needs to be analyzed later so I need to store it on disk instead of memory as it could be days later. While I'm recording video, another signal needs to be recorded. It could be anything really, let us say temperature for discussion. Assume everything is in place for this temp. acquisition.
Recording video to disk doesn't seem to be any problem. My question relates to playing this video back such that when you play it, you can also look at a data display of the recorded temperatures that happened at the same time as the video was recorded. If you were to drag the video slider manually (instead of just pressing play), the data display would also update accordingly. This essentially syncs the data display of temperature with the video picture you are seeing. Pressing play and just watching the video, the temp data would update itself with the correct historical values. Pressing pause on the video, would of course freeze the temp display to the value at that time. Wherever the video is, the temp data would have to display the correct historical value.
I would need to record possibly a few hours of video a day so disk space could be an issue if using uncompressed AVI format. I wouldn't have to save every days video file so I could eventually delete a bunch of the files. I'd just save the days video that produces interesting results to examine later. A number of video files might build up (a months worth?) before the directory is examined for possible deletes. I'd like some feedback on this too from someone who has tried uncompressed AVI versus something else that is compressed. Is performance OK if using compression?
The computer I'd be running this on is the latest workstation class machine from HP so it is a fairly powerful computer.
Is there any sample code of doing this video playback indexing to data signal display? I'm thinking there would have to be some function to know where the video is playing at all times and then historically retrieve the temperature data. Is there performance issues with this? I'd want it fairly accurate such that the smallest increment of a video frame (say 30 times a second) produced a proper data display for temperature. In reality, my signal will change faster than a typical temperature value would.

I doubt this will satisfy 100% of what you're looking for, but it should at least get the conversation started on developing some techniques we can use to syncronize acquired data playback (again, let's say temperature) with some external source. I don't know much about video playback, so I won't be able to help you much there, but I do know a lot about leveraging LabVIEW technology to play back data in real-time as best possible, while allowing the user (or the video playback itself) to dictate a specific position at any time, pause, etc...
My first recommendation would be to save your acquired temperature data as a Waveform. Waveform is more or less like a cluster with three elements: a 1D array of Y-values, an intial time (t0), and the time between samples (dt). You can use these three pieces of information to reconstitute when each sample was acquired and what the timing should be configured for to play these samples back in real time. Search the web for information on writing Waveforms to file and reading them. You should find plenty there (or post somewhere else ).
After that, we can use a Timed Loop for playback. Timed Loops allow you to set a desired Loop period. They also have a lot of other capabilities, such as setting priorities, handling the fact that your last loop didn't finish on time, etc. Here's a link with more info on Timed Loops. Other than that, Timed Loops can operate like regular while loops.
My next idea is to incorporate a current position that we keep track of. This could be, for instance, the index of the current element in the 1D Y-values array. If you want this to involve user interaction with the front panel (for instance, changing a Slider value to reflect the playback position), then you could use an event structure with a timeout case set to zero. Then update the temperature value and increment the current position in the timeout case.
You might take a look at the example I've written in LabVIEW 7.1 that "acquires" 5 seconds of sine wave data and plays it back in real time. The user can adjust the position or pause the playback at any time. Again, I don't know exactly how this would interface with video feedback. If you have more specifics about what method you will use to playback the video, maybe someone with more expertise in this area could help us out.
Jarrod S.
National Instruments
Attachments:
Signal_Playback_Realtime.vi ‏223 KB

Video playback fullscreen

While watching a video in full screen mode I press the pasue button and the whole movie window fades out and disappears. The normal functionality would be for the movie to pause. The movie then stops. No window or anything.The only way to start the movie back up is to go into itunes and restart the movie.

Don't know what's going on there...works here with two Cinema Displays.
I've got Apple FireWire NTSC (mirror on desktop-checked) in my A/V devices tab of Audio/Video Settings...(nothing selected in 'Different Output for Edit to Tape/Print to Video, because I'm not using that function in this workflow)
I can then just go to View/Video Playback/Fullscreen from the main menu and it goes right out to my second display.
Maybe has something to do with your Mac System Monitor preferences.?.?...not sure.
K

Video playback from iTunes keeps pausing

Just bought an ipad air and synced it with my itunes. However video playback keeps pausing and I have to either restart the video app or rewind a minute or so to get it to keep playing. Even then it doesnt always work.
Any ideas what the problem may be?

I have the same problem. I have a g4 466 with a gigabite of ram. I installed the latest iTunes/quicktime updates. I downloaded a tv show, and it was nearly unwatchable, it dropped so many frames. What gives?

Mapping Video Playback to Keyboard Functions

Periodically I need to change my Video Playback to my second monitor by going to View > Video Playback > Digital Cinema Desktop PREVIEW.
I once did it to "Preview - MAIN" in Motion and couldn't get it to come off unless I trashed my preferences. I'm rather concerned that in a sleepy moment my mouse will slip and I'll hit MAIN. Is there a way to map these functions (or any other menu combinations) to the Keyboard so I can just bring it up with a simple keystroke? Or is it simple called something particular in the Keyboard layout that I haven't figured out yet?
Thanks
Joel

The shortcut exists already. Command & F12 keys.

Video playback on macbook pro

how are macbook users getting the internet video playback to work?
I copied files from the airbook library that were designated for flash and quickbook player. No luck. I am very disappointed. What I am reading is a blockage of Apple programming to the Adobe programming. Really?
Please provide the work around. This is extremely important to me to see videos playback in Safari, Chrome and Firefox. I am a web developer and this amazes me when a large investment has been made by Apple's client.

1. System Preferences > Other/ Flash Player > Advanced > Delete All
     Press the "Delete All" button
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    Follow the prompts.
    Quit Safari.
    Restart computer. Relaunch Safari.
2. Enable Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.
    Press " Manage Website Settings" button for more options.

Could not measure video playback performance

Windows Experience Index stops with this message.
My Pc:
Asus m3n hd/hdmi, Phenom quad 9550, 2x1gb mem, Asus EngTX 260 (tried drivers from nvidia & asus), Win7 ent x64
Logfile:
131415 (0920) - winsat\logging.cpp:0815: --- START 2010\2\15 16:36:53 ---
131415 (0920) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 5592497f-0a37-4f1f-a1e8-3d8cc20675aa
131415 (0920) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
131758 (0920) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.
131805 (0920) - winsat\main.cpp:4585: Watch dog system enabled
131805 (0920) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
132273 (0920) - winsat\main.cpp:2505: > DWM not running.
132273 (0920) - winsat\main.cpp:2470: > EMD service will be restored on exit.
134316 (0920) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'
134316 (0920) - winsat\main.cpp:2793: > power policy saved.
134519 (0920) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
134535 (0920) - winsat\main.cpp:2814: > power policy set to maximum.
136500 (0920) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
136656 (0920) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
136719 (0920) - winsat\main.cpp:1775: > Run Assessment features
136968 (0920) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
150587 (0920) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 44168100
150587 (0920) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
150587 (0920) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
157514 (0920) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
164393 (0920) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
171398 (0920) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
178387 (0920) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
185469 (0920) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
191912 (0920) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
198526 (0920) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
205422 (0920) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
214719 (0920) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
223892 (0920) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
230101 (0920) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
230335 (0920) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 984: 0x800700ea == ERROR_MORE_DATA
230335 (0920) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 360: 0x800700ea == ERROR_MORE_DATA
230335 (0920) - media\mediaerror.cpp:0095: Error: Could not resolve the input file. (Is it present, and of a correct format?)
230351 (0920) - winsat\main.cpp:2056: > mfmedia Assessment FAILED due to an error
230429 (0920) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 44168100
230460 (0920) - winsat\processresults.cpp:1241: Skipping Graphics video playback time limit check.
230460 (0920) - winsat\processresults.cpp:1253: Skipping StdDefPlayback limit check.
230460 (0920) - winsat\processresults.cpp:1265: Skipping StdDefPlayback limit check.
230460 (0920) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
230507 (0920) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'
230522 (0920) - winsat\main.cpp:2855: > Power state restored.
230522 (0920) - winsat\main.cpp:2870: > Successfully reenabled EMD.
230819 (0920) - winsat\main.cpp:2896: > Composition restarted
230819 (0920) - winsat\watchdog.cpp:0311: Watch dog system shutdown
230819 (0920) - winsat\main.cpp:4909: > exit value = 1.
file winsat.wmv is playable with all players installed (WMP & WMC plays it & other video files in perfomance folder).
Setting maximum permissions for folder & files for all users & system accounts dont bring anyresult.
I dont have Kaspersky antivirus on pc
Datastore folder is cleared, don't working too. (maybe anyone can share this files, cause i fully deleted them from disk)
Then, with Win7DS tweaker i restored settings to win defaults. the same
Then i completley uninstall K-lite. Not working....
Index was never computed on this OS (I didn't run it without drivers for MB & Video card)
Any ideas?
PS Sorry for my poor expirience in english, i hope my message is understandable
Sorry for the crossposting

Hi Xopek1,
You may perform an In-Place upgrade to repair the system and run Windows Experience Index again.
In-place Upgrade
============
1. Start the computer.
2. Insert the Windows 7 DVD in the computer's DVD drive.
3. Use one of the following procedures, as appropriate:
a. If Windows automatically detects the DVD, the Install now screen appears. Click Install now.
b. If Windows does not automatically detect the DVD, follow these steps:
b1. Click Start, click Run, type Drive:\setup.exe, and then click OK. Note Drive is the drive letter of the computer's DVD drive.
b2. Click Install now.
4. When you reach the Which type of installation to you want? screen, click Upgrade to upgrade the current operating system to Windows 7.
What’s the result?
Regards,
Arthur Li - MSFT

Video Playback issues in HTML5 using IE10

Hello All:
We built a project in Captivate 6 and published it to HTML5. The project contains two videos that were converted to MP4.
When running the program in Chrome, all works as expected. However when running in IE10, no video is played. Any solutions?

I am also having a similar problem with slide videos in HTML5 projects. The video plays as it should when the slide is viewed for the first time. However, if the slide is revisited later, the video does not appear and no audio is played - there is just an empty space where the video should be.
In addition, when the slide video is finished playing, it will automatically restart, replay the first 1-2 seconds of the video, then stop. Neither of these issues occur when publishing the same presentation as a SWF, but I am developing for iOS devices and really need the HTML5 output. These issues also do not occur if I insert the same video file as an event video instead of a slide video; however, I need the users to be able to pause video playback, and it seems slide videos are the only way to provide that control in HTML5.
Here's what I'm using:
Captivate 6.0.1.240
All videos are .mp4
HTML5 output tested in latest versions of Safari and Google Chrome with the same result.
Any ideas or help would be greatly appreciated! Thanks.

Video playback = periodic restarts

Similar Messages

Maybe you are looking for