Video player - bug(?)

Hi,
I'm almost finishing a project (on CS5.5) and I started inserting some videos wich have the default properties (I only changed the wireframe to standard, the letterbox to none and I set the videos to auto play).
I had done this before and everything was perfect, untill now.
When I run the project and go to the video's state, shows up in the middle of the screen a shape with the video comands (play, pause, etc...) without anything else, before I actually start seeing the video. When the video starts it disappears, but it shouldn't be there anyway.
I've already checked the layers and there's nothing wrong with them. I don't know if it helps to know, but the videos are inserted in sub-states...
What is the best solution to this problem?
Thanks in advance

Because I am in the US where v21 firmware hasn't been released yet, I cannot upgrade. However after posting that message, two updates to FlashLite have been downloaded to my phone and that may have improved playback for me. I can now put the video on the link above in full screen mode. The usability of the controls in the player is terrible because the buttons are so small and even with the stylus trying to control the volume is next to impossible.
Anyway for now it seems my problem has been resolved even without a firmware upgrade, but possibly due to the FlashLite upgrade. Thanks for your message.
Lumia 920, Lumia 800
Nokia N8-00 (NAM, Product Code: 059C8T6), Symbian Belle, Type RM-596, 111.030.0609
Nokia 5800 XpressMusic (NAM, Product Code: 0577454) Software v51.2.007, Type RM-428

Similar Messages

Bug in native video player: turns off (disables) the screen

Using Android 4.3 on an eXcite Write. I don't remember if this was an issue with the original Androind 4.2.1, I do know that the problem is not present on my old Asus TF700T which has 4.2.1.
Description: When playing a video with an application that uses the native (Android) video player, for instance Toshiba's own Media Player, when the video has a section with a black screen, the tablet screen is turned off, including sensing. Audio keeps playing, the only thing you can do is turn off the tablet.
This happens only once after boot, its repeatable (as long as the sequence is the same: boot, play, dark section, it doesn't matter when that section is).
I've reproduced this problem with Media Player, Plex (when it uses the native player, which is not always), and BS Player.
This is a bug report, not a question or asking for support (I don't see the point of calling for something that will no be changed, but if required, I can provide the log). If there is an Android upgrade, I hope this bug is corrected.

Thank you for the information. I'll report it. I don't know that I'll have more information about it, but I'll certainly tell the engineers.
- Peter

The video player is in the connection error state.

Flash cS 5.5 / Win 7. Inserting video into movieclip both with 'import video' wizard and via component. FLV that plays fine on a number of different servers. On opening (after gathering metadata) the message 'The video player is in the connection error state. It enters this state when a video stream attempted to load but was unsuccessful. There are two possible reasons for the error: no connection to the server or the stream was not found.' Firstly I am treating this as a progressive download, not streaming. Second this plays fine locally, it's only when I upload to a server it fails. The FLV is in a folder directly below the SWF. Result is same with FLV in same location as SWF. MIME type set to vide/x-flv although I've also set it to applicaiton/octet-stream.
This is a very basic requirement to call the video directly from Flash, the default parameters of the component are adequate and work locally. However the video does not play. Is it fair to assume this functionality simply does not work correctly within Flash CS5.5? I'm unclear as to what >less< I could be doing with this file.

You can place the Flash and any Flash assets in any folder location that you want.... provided that you understand how Flash assets (like .flv files) are "Pathed" or located by the .swf that is calling them. The underlying principle is that the Flash assets need to be pathed relative to the Web page that the .swf is located on, NOT the actual, physical location of the .swf.
For review:
Pathing issues
Almost always when it works on the local machine and not the server, it's a pathing problem.
You can put your Flash related files in whatever folders you want, they do NOT have to be in the root, they do NOT all have to be in the same folder. But if you have a problem and if sticking them all in the root folder works, then you know that the issue was a pathing problem.
Just remember that paths used in the .swf become relative to the Web page on which the .swf is placed, NOT it’s physical location. So for example, if your .swf is in the flash/data folder and you use that .swf on a Web page in the root folder, you are in effect, removing that .swf from flash/data and putting it in root. So if the .swf is loading any related files (xml, images, video, etc), the path used inside the .swf to load the .xml file has to be relative to it's new location in root and then back down into flash/data. This is true even though when testing the .swf by itself, it can be inside flash/data and work just fine, since relative to it's location, the path is just fine, they are in the same folder. But if that same path is used when the .swf is placed on a page two folder levels up, the relative path has changed, the old "same folder" path will not work.
In fact if you are placing the .swf on a web page in a different folder than the .swf is stored in, and that .swf calls external assets, then direct clicking and opening of the .swf in it’s folder should NOT work! That’s because the paths to the external assets should be relative to the Web page and not the physical location of the .swf.
So just be sure that you use addresses relative to the final Web page locations (not physical file locations) and you can put the Flash related files in what ever folders you want.
Best wishes,
Eye for Video
www.cidigitalmedia.com
So you can place the .flv wherever you want, but you can't just go and move the .flv without also correcting the path to the .flv inside the .swf.
So be sure that you have the .flv in the correct subfolder before you do any insert of the Flash player.
Also I'm not a great fan of requiring my viewers use the latest and greatest (and most bug filled version) of any pluggin or software for that matter.
<param name="swfversion" value="11.0.0.0" />
I refer NOT to upgrade to ver 11 so will not be seeing your Flash anytime soon. If you want to appeal to a large audience, change that to version 10.
Best wishes,
Adninjastrator

That odd Apple Video Player

Ok long time no post i have made posts here in the past but i got caught up in some work and have had no time to help out.
Well i was using my Wings card to watch TV on my Beige Minitower and i decided to take some snap shots of the show and i also took a movie of an old commercial on a tape, so it shows the pictures fine but the movie plays the video part fine but the audio was slow but i saved it anyways, i have had this problem for a while and it bugs me, so i put the pictures and the movie onto a USB memory stick and brought it over to the mini. The mini did not recognize the files it gave them an executable script icon so i dragged the movie to Quicktime 7 and it does not recognize the file it gives an error and so i try VLC gives me an error so i try to open the pictures but it does a similar thing.
Anyone know what is going on, does my Quicktime need an update on the beige? or did the files transfer wrong?
Thanks

David,
It looks like your questions about the pea soup was answered. I have done video stuff on the G3 in the past and it isn't unusual for the video and audio to get out of synch. QT mutator will let you go in and edit the track lengths of the two tracks to get them back together.
In general you're asking a lot of a G3 to handle video. You''ll also find that video as saved by Apple Video Player really eats up harddrive space fast. There's MP4 encoders (codecs) out there that will give you as good quality as its available with a Wings card but they raised another set of issues on my G3.
If you're into encoding with the G3 on OS9 then I'd suggest HackTV Carbon which is available as a free download from Apple if you can find it (it's hidden somewhere on the developer's site). This will give you access to more feeatures than AVP. The only thing is, it is happier with QT5 than QT6 so I have two versions of my OS and switch to QT5 when I want to record.

Popup fields rendered behind video player applet

Hi,
We are embedding a video player using Windows media player. The code is like:
<object id="MediaPlayer4" width="302"
height="165"
classid="CLSID:22D6f312-B0F6-11D0-94AB-0080C74C7E95"
standby="Loading Windows Media Player components..."
type="application/x-oleobject"
codebase="http://activex.microsoft.com/activex/controls/mplayer/en/nsmp2inf.cab#Version=6,4,7,1112"
style="margin:11.0px;">
<param name="filename"
value="${pageFlowScope.newAssetBean.asset_preview_url}"/>
<param name="Showcontrols" value="True"/>
<param name="autoplay" value="false"/>
<param name="autoStart" value="0"/>
<embed type="application/x-mplayer2"
src="${pageFlowScope.newAssetBean.asset_preview_url}"
width="302" height="165"
autostart="false"></embed>
</object>
Once a popup is shown above this player, the fields in the popup get behind the embedded player.
How do we fix this?

Hi,
not knowing your JDeveloper version, there is known bug for 11g R2 --> bug 13492597. It seems that this is fixed in a backport for 11.1.1.6
Frank

There was a change today... And now I can't open my Ant Video Player... I can download but i can't open the player

Firefox did some updating today and now I can't seem to open my Ant Video Player... I use this a ton so it would be nice to get this fixed. Please/thank you

hi drk132, please directly contact the extension developers through the means provided at their [http://support.ant.com/home support homepage] - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon for new firefox versions. thank you...

Raise your hand if you want better Native Video Player support on iPhone!

Please submit a bug/enhancement report to Apple if you would like them to remove the restriction on iPhone's ability to playback native video inline (as opposed to ALWAYS going fullscreen). This is handy for a number of application:
1. Using actionscript and stageWebView, you can control the native video player by issuing javascript calls to content embedded in an html page. (see http://www.yeahbutisitflash.com/?p=3968 for a good tutuorial)
Likewise, you can have your movie react to events happening in the native video player (time index, finished playing, etc.) by doing the reverse (again, http://www.yeahbutisitflash.com/?p=3996 is a great read for how to get started doing this)
2. You can allow the user to send video content to an Apple TV (or maybe a future iTV?) without releasing app functionality. ie: the user doesn't get locked into a full-screen state on his or her device.
The ONLY reason AIR lacks interactivity with the native player on iOS is because the Obj-C UIwebview webview.allowsInlineMediaPlayback property is set to "NO" by default on the iPhone (it is set to "YES" on the iPad and everything I described above works beautifully!)
From what I gather, in Xcode, you simply set this UIwebview propterty to "yes" along with adding "webkit-playsinline" to the html video tag in order to permit an app to play back video inline on the iPhone. I suggested to Apple they remove the restriction, perhaps requiring the html tag alone for inline playback.
If you agree that AIR should have improved native video handling, please submit a bug/enhancement report to Apple bugreport.apple.com Having this "restriction" lifted will ensure we can produce quality Universal media apps with identical functionality on both iPad and iPhone platforms.
Thanks for reading!

What's an ECR?
I filed a bug report with Apple. I guess I'm satisfied with the response (is all I can say due to standard NDA) But from what I've read elsewhere on the 'net, the more reports that come in regarding an issue, the more it gets escalated.
Do you have an iPad example demonstrating these capabilities? The StageWebView videos players I've seen always had limited control over the video.
I have an app in development with these capabilities fully functional and very stable. Unfortunately, javascript control of native video in a stageWebView is hobbled on the iPhone due to the restriction I describe above. Specifically, the functions all work except for the vid.play() js command, which will always trigger a full-screen playback. Poop. I guess I will go for an iPad-only soft launch and put the iPhone/universal version on the back burner.

[svn:fx-trunk] 11625: The last few cleanups for the OSMF video player.

Revision: 11625
Author:   [email protected]
Date:     2009-11-10 12:03:43 -0800 (Tue, 10 Nov 2009)
Log Message:
The last few cleanups for the OSMF video player. Hooking up the videoObject property in VideoDisplay to return the flash.media.Video object. Also, when pauseWhenHidden is set to false, we'll detach all the event listeners on the parents because they are no longer needed.
QE notes: -
Doc notes: -
Bugs: -
Reviewer: Kevin
Tests run: checkintests
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoDisplay.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoPlayer2.as

Hi Chris,
thanks for your tip. I didn't get around to trying it, as I have just solved the problem:
Unless I misunderstand how things are supposed to work, I think I also might have found a bug (or at a minimum an usability issue):
When I talked about having relaxed all the local storage settings in my original post, I meant that in the System Preferences / Flash Player / Storage pane I had set "Allow sites to save information on this computer". I also had done some experimention around the "Ask me" and "Settings by Site" options - all without success. I had navigated to that pane by right-clicking on "Global Settings" from the non-working video players.
However, just now I discovered the following: When I navigate to http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.htm l (the embedded Global Storage Settings Panel) I found that in fact "Allow third-party Flash content to store date on your computer" was disabled all along!
So effectively, the System Preferences Pane and the Global Settings Manager were not in sync / had conflicting settings and it looks like the Global Settings Manager took precedence. When I enabled local storage in the Global settings manager, things started working immediately.
This is extremely easily reproducable by the way: Just change some settings in the Global Settings Manager and then right click "Global Settings" within it and the Preference Pane coming up will be in conflict with the settings manager.
(Even if this is somehow by design, its quite confusing)
Hope this helps future readers with the same issue. Also, this is an issue in 11.3 Beta 2, so maybe your teams can still fix this for 11.3
Thanks,
Jens

An image changing to FLV Video Player in AJAX Update Panel

Hi,
I'm trying to design part of a website can seen as video gallery. I have videos related to subcategories; and subcategories that related to categories.
I was using popups but now want to change it. Simply, firstly there are images and descriptions(in an update panel) of videos on page. After clicking thumbnail, the region includes thumbnail and description wil be changed to FLV video player.
Outside of updatepanel player is working good. but when i move it into updatepanel; doesn't working in IE. Because JS code (AC_FL_RunContent(.....)) is not working in updatepanel. Tried another script (like alert('hello!');), it's working. I think i have problem with the function named AC_FL_RunContent(...). It's working as i want, if open page with Firefox.
Looked for this in google. Visited many pages, but never find a solution for this nor source of problem. I hope someone can help me
Using ASP.Net. I'm attaching my tree structure and codes below:
Default.aspx
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default"%>
<!
DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" //www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
<
html xmlns ="http://www.w3.org/1999/xhtml">
<
head id="Head1" runat="server">
<title>Untitled Page</title>
<link href="StyleSheet.css" rel="stylesheet" type="text/css"/>
<script type ="text/javascript">
function
MM_CheckFlashVersion(reqVerStr,msg){
with (navigator){
      var isIE = (appVersion.indexOf("MSIE") != -1 && userAgent.indexOf("Opera") == -1);
      var isWin = (appVersion.toLowerCase().indexOf("win") != -1);
      if (!isIE || !isWin){
        var flashVer = -1;
        if (plugins && plugins.length > 0){
            var desc = plugins["Shockwave Flash"] ? plugins["Shockwave Flash"].description : "";
            desc = plugins["Shockwave Flash 2.0"] ? plugins["Shockwave Flash 2.0"].description : desc;
            if (desc == "") flashVer = -1;
            else{
              var descArr = desc.split(" ");
              var tempArrMajor = descArr[2].split(".");
              var verMajor = tempArrMajor[0];
              var tempArrMinor = (descArr[3] != "") ? descArr[3].split("r") : descArr[4].split("r");
              var verMinor = (tempArrMinor[1] > 0) ? tempArrMinor[1] : 0;
              flashVer = parseFloat(verMajor + "." + verMinor);
        // WebTV has Flash Player 4 or lower -- too low for video
        else if (userAgent.toLowerCase().indexOf("webtv") != -1) flashVer = 4.0;
        var verArr = reqVerStr.split(",");
        var reqVer = parseFloat(verArr[0] + "." + verArr[2]);
        if (flashVer < reqVer){
            if(confirm(msg))
              window.location = http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash;
function callFLVP(){
AC_FL_RunContent('codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,0,0','width','320','height','240','id','FLVPlayer','src','FLVPlayer_Progressive','flashvars','&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamName=./VideoGallery/serpende&autoPlay= false&autoRewind=false','quality','high','scale','noscale','name','FLVPlayer','salign','lt','pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movie','FLVPlayer_Progressive');
</
script>
<
script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
</
head>
<body onload="MM_CheckFlashVersion('7,0,0,0','Content on this page requires a newer version of Adobe Flash Player. Do you want to download it now?');">
<form id="form1" runat="server">
      <ajaxToolkit:ToolkitScriptManager ID="ScriptManager1" runat="server" />
      <div>
        <asp:UpdatePanel ID="UpdatePanel1" runat="server">
        <ContentTemplate>
            <asp:Literal ID="thumbLiteral" runat="server"></asp:Literal>
        </ContentTemplate>
        <Triggers>
            <asp:AsyncPostBackTrigger ControlID="showvideoButton" EventName="Click" />
        </Triggers>
        </asp:UpdatePanel>
        <asp:Button ID="showvideoButton" Text="Video" runat="server" onclick="showButton_Click"/>
     </div>
   </form>
</
body>
</
html>
Default.aspx.cs
public partial class _Default : System.Web.UI.Page
     protected void Page_Load(object sender, EventArgs e)
          thumbLiteral.Text = "<img src id=\"imgThumb\" src=\"./VideoGallery/small/serpende.jpg\" />";
     protected void showButton_Click(object sender, EventArgs e)
          string strNoScriptBlock = "";
          strNoScriptBlock += "<noscript>";
          strNoScriptBlock += "<object classid=\"clsid:D27CDB6E-AE6D-11cf-96B8-444553540000\" codebase=\"http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,0,0\" width=\"320\" height=\"240\" id=\"Object1\"><param name=\"movie\" value=\"FLVPlayer_Progressive.swf\" /><param name=\"salign\" value=\"lt\" /><param name=\"quality\" value=\"high\" /><param name=\"scale\" value=\"noscale\" /><param name=\"FlashVars\" value=\"&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamName=serpende&autoPlay=false&a utoRewind=false\" /><embed src=\"FLVPlayer_Progressive.swf\" flashvars=\"&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamName=serpende&autoPlay=fal se&autoRewind=false\" quality=\"high\" scale=\"noscale\" width=\"320\" height=\"240\" name=\"FLVPlayer\" salign=\"LT\" type=\"application/x-shockwave-flash\" pluginspage=\"http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash\" /></object>";
     strNoScriptBlock += "</noscript>";
     string strScriptBlock = "";
     strScriptBlock += "<script>";
     strScriptBlock += "callFLVP();";
     strScriptBlock += "</script>";
     ScriptManager.RegisterClientScriptBlock(this, typeof(string), "strScriptBlock", strScriptBlock, false);
     thumbLiteral.Text = strNoScriptBlock;

Let's check this first;
If you have problems with current Shockwave Flash plugin versions then check this:
* see if there are updates for your graphics drive drivers
'''https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration'''
* disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
'''https://forums.adobe.com/message/4468493#TemporaryWorkaround'''
* disable hardware acceleration in the Flash plugin
'''https://forums.adobe.com/thread/891337'''
See also:
* '''http://kb.mozillazine.org/Flash#Troubleshooting'''

I get a security sandbox error #2122 when i try to use ImageSnapshot on video player

hey guys... so all my application does is... it has a video player... and when i initiate the component it loads the flv from a different server, and plays the video... now while its playing the video i have a button called capture, and whe you hit that button the user is able to take snapshots of the current frame.
this seems to work perfectly locally, but as soon as i uploaded it to the server i get problems...
the error states:
SecurityError: Error #2122: Security sandbox violation: BitmapData.draw: http://website1.com/Content/swf/oneStopImageVersion.swf cannot access http://website2.com/videos/originals/Grand_Opening.flv. A policy file is required, but the checkPolicyFile flag was not set when this media was loaded.
     at flash.display::BitmapData/draw()
     at mx.graphics::ImageSnapshot$/captureBitmapData()
     at modules.videoHandler::videoHandler/captureVideo()
     at modules.videoHandler::videoHandler/___videoHandler_LinkButton3_click()
i have the crossdomain file in the root directory of website2.com, and i have the folloing line of code in there
<?xml version="1.0"?>
<cross-domain-policy>
     <site-control permitted-cross-domain-policies="all" />
     <allow-access-from domain="website1.com"/>
     <allow-access-from domain="*.website1.com"/>
         <allow-http-request-headers-from domain="*.website1.com" headers="SOAPAction"/>
</cross-domain-policy>
any ideas on how to fix this problem???
my actionscript code is as follows
public function captureVideo():void{
     var snapshot:BitmapData = ImageSnapshot.captureBitmapData(videoPlayer.videoDisplay);
     initialThumbnail.source = new Bitmap(snapshot); //this is the image tag in my mxml
any help is greatly appretiated!!!!
thanks in advance!

any one with ideas???
i've been doing some more research... and found a possible solution... where i could send the video thru a server proxy... but the only thing is doing that might slow down my process... i was wondering if there was any other solution to this problem??

My ant video player after i updated to firefox four is now in the upper part of the screen where it opens up and i cant find out how to fix it

my ant video player after i updated to firefox four is now in the upper part of the screen where it opens up and i cant find out how to fix it

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

How can i make RealPlayer the default video player?

I use safari 3.0.4
When it accesses sites containing video, it plays it in Flash (eg YouTube)
How do I get safari to use realplayer instead? (Even my Firefox 2.0 uses flash) (I have RP 10)
I am teaching a course in media literacy and show some of the uploaded old tv commercials to my students. i want to show next year's class some of the same commercials, so i want to save the ones I find this year while they're available.
At school, I work on a pc, and it plays video back in RealPlayer which gives me a 'download' option, so i can save these commercials.
But when i find good clips at home, on my mac, all I can do is note the urls, then do it all again at school to get to them to download. it would be much easier if i could download them as I find them, then take them to school on my portable drive.
any solution?
Thank you
Elizabeth

At school, I work on a pc, and it plays video back in RealPlayer which gives me a 'download' option, so i can save these commercials
RealPlayer v. 11.0.0 (may still be in beta) now includes that Downloader - a very useful item!
It is a free download but they will ask for money in July. Must be why they call it RealPlayer Plus!
You can get it here:
http://uk.real.com/player/mac/
I have had it for a couple of weeks and have had no problems.
As for making RealPlayer the default video player, IMO that is not a good idea. There is a lot of stuff out there that RealPlayer would not be able to handle.
These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
It is known to work in the great majority of cases with Safari 3.0.4, QT 7.3 or 7.4 and OS 10.4.11. (If you are running Leopard, ensure that all plug-ins have been updated for OS 10.5.2, but please see my footnote).
Assuming you already run Tiger versions OS 10.4.9 or above (this has not yet been verified with Leopard) and have Quicktime 7.2 or above, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer 10 for Mac from http://forms.real.com/real/player/blackjack.html?platform2=Mac%20OS%20X&product= RealPlayer%2010&proc=g3&lang=&show_list=0&src=macjack
The new RealPlayer Plus (v.11) is still in beta and therefore free, but works well on Tiger. It includes a download function, and you can get that here:
http://uk.real.com/player/mac/
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs.
Adobe FlashPlayer should first be uninstalled using the appropriate uninstaller available here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157&sliceId=2 and then the latest version obtained from here: http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash and installed.
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS, but please see my footnote if you are running Leopard.)
In earlier versions than QT 7.1.3 in Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
You should also ensure, if you are running Tiger 10.4.11 or Leopard, that you have downloaded and installed the correct version for your Mac of Security Update 2007-009.1.1, which also deals with the Quicktime/Flash issues you may have experienced, such as the '?'. What happened was that both Quicktime as well as Adobe FlashPlayer tried to play the Flash video at the same time. This no longer happens. (N.B. Security Update 2007-009 1.1 requires both a restart and a permission repair.)
If you get problems with viewing video on a website try moving this file to your Desktop:
Hard drive/Library/Internet Plug-Ins/QuickTime Plugin.webplugin
and then restarting Safari. If all now works, you can trash that file.
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/
Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them) to enable Java.
Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz, and that you have selected 'Built in Audio'.
Important: Now repair permissions and restart.
You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.
FOOTNOTE
If you are running Leopard:
Some users have mentioned that the latest Flash Player (v.9.0.115.0) conflicts with Leopard, and that they have needed to revert to v. 9.0.47. This can be downloaded from here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14266&sliceId=1

How can I remove a video player?

Hi, awhile back I installed a video player, that I can't even remember the name of now, and it plays all my video's being watched over the web with this player now, it does give me the option to use original player, but you have to be lightning quick to click it and even then sometimes it won't. Its driving me nuts! I hate it! Can anyone tell me please how to maybe find this program and delete it. And what is the default video player on the Mac supposed to be?
Thanks so much.

From the Safari menu bar, select
Help ▹ Installed Plug-ins
Besides the following, what plugins are listed?
iPhotoPhotocast
Java
QuickTime
Shockwave Flash
WebKit built-in PDF

Lack of All format playable Video player with Full Screen STRETCH feature

I am a big fan of Nokia and i know Windows phone is the world best smart phone.im using Lumia 820. but in my highend Lumia devices lack of a
All format playable Video player (like mkv etc.)officially from Nokia or Microsoft.pls this is very important thing for all Lumia user for HD movie experience.pls update current video player.now I'm using Moli player but there is 1
vital feature is missing...this is Full Screen STRETCH...when i play movie using Moli player on my phone screen upper and lower portion appear black bar.It mean Ascept ratio not match.This is very important for full screen movie exp.But this
feature is also available on Android MX player.
So,I request you please update current video player with
Full Screen STRETCH feature for windows phone user.Thank you.

Hello,
You should ask in the
Windows Phone forums on the Microsoft Community forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Creating a FLV video player with full screen option

> This message is in MIME format. Since your mail reader
does not understand
this format, some or all of this message may not be legible.
--B_3258016930_5977304
Content-type: text/plain;
charset="ISO-8859-1"
Content-transfer-encoding: 8bit
Hi!
I am trying to create a video player that will allow full
screen functions
like what we can see on youtube. I know how to create the
window and the pop
up but the only problem I am having is having the original
video in the
small screen to pause or go silent when the full screen mode
is activated.
How can get it done?
Thank you.
°K.
--B_3258016930_5977304
Content-type: text/html;
charset="ISO-8859-1"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>Creating a FLV video player with full screen
option</TITLE>
</HEAD>
<BODY>
<FONT FACE=3D"Arial"><SPAN
STYLE=3D'font-size:12.0px'>Hi!<BR>
<BR>
<BR>
I am trying to create a video player that will allow full
screen functions =
like what we can see on youtube. I know how to create the
window and the pop=
up but the only problem I am having is having the original
video in the sma=
ll screen to pause or go silent when the full screen mode is
activated. How =
can get it done?<BR>
<BR>
Thank you.<BR>
<BR>
<BR>
<B>°K.<BR>
</B> </SPAN></FONT>
</BODY>
</HTML>
--B_3258016930_5977304--

Hello,
You should ask in the
Windows Phone forums on the Microsoft Community forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Video player - bug(?)

Similar Messages

Maybe you are looking for