Video player update issue on Satellit P850-12x - build version different

Videoplayer update on Satellit P850-12x
Anyone else had problems with this?
The installer complains about source and target build versions being different

Maybe the information in this thread would help you:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=71240
Usually such error message appears because the Toshiba Player is already updated.

Similar Messages

Why are Java and Video Player updates appearing in Safari

Today these fake Java and Video Player update pop ups started appearing in Safari 6.2.4, in OS 10.8.5. The Java updates say I need version 13 which doesn't exist and the video player pop ups are gray with a red square that resemble the Adobe colors. These are popping up on almost every page I load in Safari.
I've looked in the Launch Daemons folder and that other Launch folder that keeps being recommended in the post that says I don't need to download anything and there is nothing out of the ordinary there. How do I stop these pop ups?
Tracy

The update alerts are indeed fake, and are intended to dupe you into installing malware or disclosing private information so that your identity can be stolen.
You might get the alerts when visiting a website that has been hacked. Don't visit the site again. If applicable, notify the site administrator of the problem, but don't send email to an unknown party.
If you get the alerts when visiting more than one well-known website, such as Google, YouTube, or Facebook, then they may be the result of an attack on your router that has caused you to get false results from looking up the addresses of Internet servers. Requests sent to those sites are redirected to a server controlled by the attacker. It's possible, but less likely, that the DNS server used by your ISP has been attacked.
Back up all data.
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
          8.8.8.8
          8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. If the fake update alerts stop, see below. Otherwise, ask for instructions.
The router's documentation should tell you how to reset it to the factory default state. Usually there's a pinhole switch somewhere in the back. It may be labeled "RESET." Insert the end of a straightened paper clip or a similar tool and press the button inside for perhaps 15 seconds, or as long as the instructions specify.
After resetting the router, quit the web browser and relaunch it while holding down the shift key. From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Do the equivalent if you use another browser. Open the Downloads folder and delete anything you don't recognize.
Then go through the router's initial setup procedure. I can't be specific, because it's different for every model. The key points are these:
1. Don't allow the router to be administered from the WAN (Internet) port, if it has that option. Most do.
2. Set a strong password to protect the router's settings: at least ten random upper- and lower-case letters and digits. Don't use the default password or any other that could be guessed. Save the password in your keychain. Any password that you can remember is weak.
3. If the router is wireless, or if you have a wireless access point on the network, use "WPA 2 Personal" security and set a different strong password to protect the network. If the router or access point doesn't support WPA 2, it's obsolete and must be replaced.
During the time the router was compromised, you were redirected to bogus websites. If you ever connected to a secure site and got a warning from your browser that the identity of the server could not be verified, and you dismissed that warning in order to log in, assume that your credentials for the site have been stolen and that the attacker has control of the account. This warning also applies to all websites on which you saw the fake update alerts.
Check the router manufacturer's website for a firmware update.
If you downloaded and installed what you thought was a software update, ask for instructions.

Import a video player made in flash cs4 into flash builder 4

I want to import a video player made in flash cs4 into flash builder 4. Are there any pitfalls that i should be aware of?

pdf is not a supported file type in flash.

I keep getting a message about video player update. What's going on? Why do I need this? Prove that I do - too many viruses out there to just download something

A page keeps popping up saying FIREFOX wants me to download this video player. I'm leery of downloading anything these days with the Heartbleed virus out there

If you get a pop-up message asking to update or install other software then such a message is likely a scam and you should never respond to such an alert to avoid getting infected with malware.
You should only update Firefox via "Help > About" or by downloading and installing Firefox from the Mozilla server and never via a pop-up or link on a web page.

Adobe Flash Player Update Issues

I am working on a Macbook Air with OS X Yosemite 10.10.2.
I get a notification daily that my Flash Player is out of date, even when I do the install and complete it successfully it notifies me again that it is out of date.
Any suggestions?
Thanks,
Jessica

Is this Safari?
You may need to completely uninstall and then reinstall Flash Player to get it to notice that you've updated.
Uninstall Flash Player | Mac OS
Then please use the offline installer to re-install:
http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
If that still doesn't work, any additional details (browser, version, etc) you can provide would be useful in giving you a better answer.
Thanks!

Flash Player Update Issue

When trying to do update of Flash Player on a Mac 10.6.8 with Intel processor, I get a box that reads "Convert Text" with a list of word type programs like Microsoft Word Excel etc. ??

Can you try updating from this page?
http://get.adobe.com/flashplayer

Please help... flash player updating issues...

trying to update version 6.0r25... i downloaded the installer
for version r79, and when i run it, it says it cant locate the
plugins folder... so when i try to install without it, or make a
folder for it, the install program just freezes up....
have tried unsuccessfully to install for the last 10-15
minutes, and same problem.. just continues to freeze..
could you please help with assistance on this matter..
thanks so much..

I suspect this is a Yahoo problem. They'll need to update
their Flash Plaeyr detection. I wrote about it yesterday in several
threads on this forum, and in my blog at
http://bentimagemedia.com/.
You should contact them immediately and let them know.
I ran a quick test and I had no problem using chat in FireFox
with the FP10 plugin. It only failed when I tried it in IE6 with
the FP10 ActiveX control (see below). Make a note of this when you
contact yahoo.
In the meantime, I'll see if we have any connections at yahoo
that we can ping on our side..
<<PS: Please note that I also have 'Adobe Flash Player
9 ActiveX' installed as I use Firefox 3.0.3 on a Windows XP SP3
system and sometimes some website components don't function without
this ActiveX software.>>
This is incorrect. The Flash Player ActiveX control is only
used with IE Windows. All other browsers and platforms use the
Flash Player plugin.
Regards,
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player/Digital Editions
Adobe

Video controller updating issue

I Have mobile intel(R) 915GM/GMS 910 GML Express Chipset Family in windows XP SP3.Recently I upgraded the OS to windows 8.1Pro.But the video controller is not support this.What can I do？

Hi
please also check you motherboard specification whether you can upgrade your chipset or add external graphic card driver which supported with Windows 8.1, you can ask your PC manufactured or Mainboard manufactured for this advance information.
This information maybe can give you some basic idea which processor should you have, regarding graphic card you can "bing" it which graphic card supported by your mainboard and Windows 8.1
http://www.intel.com/support/graphics/sb/CS-033838.htm?wapkw=windows+8.1+faq
This is the minimum requirement for Windows 8.1
http://windows.microsoft.com/en-us/windows-8/system-requirements

Raise your hand if you want better Native Video Player support on iPhone!

Please submit a bug/enhancement report to Apple if you would like them to remove the restriction on iPhone's ability to playback native video inline (as opposed to ALWAYS going fullscreen). This is handy for a number of application:
1. Using actionscript and stageWebView, you can control the native video player by issuing javascript calls to content embedded in an html page. (see http://www.yeahbutisitflash.com/?p=3968 for a good tutuorial)
Likewise, you can have your movie react to events happening in the native video player (time index, finished playing, etc.) by doing the reverse (again, http://www.yeahbutisitflash.com/?p=3996 is a great read for how to get started doing this)
2. You can allow the user to send video content to an Apple TV (or maybe a future iTV?) without releasing app functionality. ie: the user doesn't get locked into a full-screen state on his or her device.
The ONLY reason AIR lacks interactivity with the native player on iOS is because the Obj-C UIwebview webview.allowsInlineMediaPlayback property is set to "NO" by default on the iPhone (it is set to "YES" on the iPad and everything I described above works beautifully!)
From what I gather, in Xcode, you simply set this UIwebview propterty to "yes" along with adding "webkit-playsinline" to the html video tag in order to permit an app to play back video inline on the iPhone. I suggested to Apple they remove the restriction, perhaps requiring the html tag alone for inline playback.
If you agree that AIR should have improved native video handling, please submit a bug/enhancement report to Apple bugreport.apple.com Having this "restriction" lifted will ensure we can produce quality Universal media apps with identical functionality on both iPad and iPhone platforms.
Thanks for reading!

What's an ECR?
I filed a bug report with Apple. I guess I'm satisfied with the response (is all I can say due to standard NDA) But from what I've read elsewhere on the 'net, the more reports that come in regarding an issue, the more it gets escalated.
Do you have an iPad example demonstrating these capabilities? The StageWebView videos players I've seen always had limited control over the video.
I have an app in development with these capabilities fully functional and very stable. Unfortunately, javascript control of native video in a stageWebView is hobbled on the iPhone due to the restriction I describe above. Specifically, the functions all work except for the vid.play() js command, which will always trigger a full-screen playback. Poop. I guess I will go for an iPad-only soft launch and put the iPhone/universal version on the back burner.

Adobe Flash Player Update Service Error Message

I am using Windows Vista 7.
Every hour I receive an Adobe Flash Player 11.6r602 Update Service Error Message.
How do I get rid of it?

This will most likely be fixed in the next Flash Player update, so check regularly for a new version at http://forums.adobe.com/community/flashplayer/announcements
[topic moved to Flash Player forum]

Newbie. local video player issue, please help.

Hi,
I have been using Dreamweaver CS3 for a few months but I can't seem to figure out my problem and was hoping someone here with much more wisdom could please help me.
I am creating a local site, just for use on my personal computer, to better organize my computer as well as my life.
I am trying to link some videoes I have on my computer so that when I click on them they will open in my default media player (VLC), however I seem to only be able to get them to open on another webpage.
ie. I click on my morning workout video and instead of it opening in VLC player my site goes to a new page that plays the video there (with no controls). Is there a way I can get my video player to open the local file instead of it being sent to a new page? The files are in .avi, .mp4, .mp3, .flv, .mpeg format.
I know I could simply find all the files individually when I want to watch them but that would defeat the purpose of creating this site to organize my computer.
This issue is driving me crazy. I would really appreciate any and all help! Thank you!

Yes, I hope they will provide that option in the software update asap.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

Hi i'm using firefox nightly after today's flash player update im facing this error "style error #2134" when playinf videos on some websites tell me about inf

Hi, i'm using firefox nightly.
After today's flash player update im facing this error "style error #2134" when playinf videos on some websites. Tell me about info i have to provide to solve this problem. Thanks

Hello,
I am not a Flash developer, but based on my search, this particular error 'style error #2134' means that the Flash video / game that you are viewing is not able to store data on the local storage (your machine).
Can you please check the setting described in the Adobe KB [http://helpx.adobe.com/flash-player/kb/error-2134-cannot-create-sharedobject.html Enable Storage for Flash Player], to see if this helps in resolving the issue.
Thank you

Latest flash player update 11.2.202.229 causing player for forcefully buffer full video content.

Hi,
Been using the flash player for years on various websites, and over the past few days hundreds of videos have stopped working - seemingly related to computers / browsers with the latest flash player update.
Video just won't play at all - instead of playing, it starts to buffer the whole video file, but mostly never manages to complete and play.
Am I alone here - or is this a wider issue?
Here is just one example video that will not play with the latest version - http://www.vintra.co.uk/Client-Script-Libraries/Thurleigh_Investment_Management_Q1_Preview _1.htm
Regards
Stewart

Hi Chris,
Thanks very much for the fast response. I have tried installing the 11.3 beta update onto a local PC, and this does seem to resolve the issue.
And now the inevitable question...
When is 11.3 likely to get rolled out?
No doubt this is a tricky question for you to answer - but roughly, is this days/weeks/months away. I just could do with a vague idea, as we can cope with it for a day or two, but otherwise I'm going to need to come up with an alternative. My whole business is based around online video in one form or another - and everyone with the latest update can no longer use it - hence big problem for us.
Many Thanks
Stewart

An image changing to FLV Video Player in AJAX Update Panel

Hi,
I'm trying to design part of a website can seen as video gallery. I have videos related to subcategories; and subcategories that related to categories.
I was using popups but now want to change it. Simply, firstly there are images and descriptions(in an update panel) of videos on page. After clicking thumbnail, the region includes thumbnail and description wil be changed to FLV video player.
Outside of updatepanel player is working good. but when i move it into updatepanel; doesn't working in IE. Because JS code (AC_FL_RunContent(.....)) is not working in updatepanel. Tried another script (like alert('hello!');), it's working. I think i have problem with the function named AC_FL_RunContent(...). It's working as i want, if open page with Firefox.
Looked for this in google. Visited many pages, but never find a solution for this nor source of problem. I hope someone can help me
Using ASP.Net. I'm attaching my tree structure and codes below:
Default.aspx
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default"%>
<!
DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" //www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
<
html xmlns ="http://www.w3.org/1999/xhtml">
<
head id="Head1" runat="server">
<title>Untitled Page</title>
<link href="StyleSheet.css" rel="stylesheet" type="text/css"/>
<script type ="text/javascript">
function
MM_CheckFlashVersion(reqVerStr,msg){
with (navigator){
      var isIE = (appVersion.indexOf("MSIE") != -1 && userAgent.indexOf("Opera") == -1);
      var isWin = (appVersion.toLowerCase().indexOf("win") != -1);
      if (!isIE || !isWin){
        var flashVer = -1;
        if (plugins && plugins.length > 0){
            var desc = plugins["Shockwave Flash"] ? plugins["Shockwave Flash"].description : "";
            desc = plugins["Shockwave Flash 2.0"] ? plugins["Shockwave Flash 2.0"].description : desc;
            if (desc == "") flashVer = -1;
            else{
              var descArr = desc.split(" ");
              var tempArrMajor = descArr[2].split(".");
              var verMajor = tempArrMajor[0];
              var tempArrMinor = (descArr[3] != "") ? descArr[3].split("r") : descArr[4].split("r");
              var verMinor = (tempArrMinor[1] > 0) ? tempArrMinor[1] : 0;
              flashVer = parseFloat(verMajor + "." + verMinor);
        // WebTV has Flash Player 4 or lower -- too low for video
        else if (userAgent.toLowerCase().indexOf("webtv") != -1) flashVer = 4.0;
        var verArr = reqVerStr.split(",");
        var reqVer = parseFloat(verArr[0] + "." + verArr[2]);
        if (flashVer < reqVer){
            if(confirm(msg))
              window.location = http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash;
function callFLVP(){
AC_FL_RunContent('codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,0,0','width','320','height','240','id','FLVPlayer','src','FLVPlayer_Progressive','flashvars','&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamName=./VideoGallery/serpende&autoPlay= false&autoRewind=false','quality','high','scale','noscale','name','FLVPlayer','salign','lt','pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movie','FLVPlayer_Progressive');
</
script>
<
script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
</
head>
<body onload="MM_CheckFlashVersion('7,0,0,0','Content on this page requires a newer version of Adobe Flash Player. Do you want to download it now?');">
<form id="form1" runat="server">
      <ajaxToolkit:ToolkitScriptManager ID="ScriptManager1" runat="server" />
      <div>
        <asp:UpdatePanel ID="UpdatePanel1" runat="server">
        <ContentTemplate>
            <asp:Literal ID="thumbLiteral" runat="server"></asp:Literal>
        </ContentTemplate>
        <Triggers>
            <asp:AsyncPostBackTrigger ControlID="showvideoButton" EventName="Click" />
        </Triggers>
        </asp:UpdatePanel>
        <asp:Button ID="showvideoButton" Text="Video" runat="server" onclick="showButton_Click"/>
     </div>
   </form>
</
body>
</
html>
Default.aspx.cs
public partial class _Default : System.Web.UI.Page
     protected void Page_Load(object sender, EventArgs e)
          thumbLiteral.Text = "<img src id=\"imgThumb\" src=\"./VideoGallery/small/serpende.jpg\" />";
     protected void showButton_Click(object sender, EventArgs e)
          string strNoScriptBlock = "";
          strNoScriptBlock += "<noscript>";
          strNoScriptBlock += "<object classid=\"clsid:D27CDB6E-AE6D-11cf-96B8-444553540000\" codebase=\"http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,0,0\" width=\"320\" height=\"240\" id=\"Object1\"><param name=\"movie\" value=\"FLVPlayer_Progressive.swf\" /><param name=\"salign\" value=\"lt\" /><param name=\"quality\" value=\"high\" /><param name=\"scale\" value=\"noscale\" /><param name=\"FlashVars\" value=\"&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamName=serpende&autoPlay=false&a utoRewind=false\" /><embed src=\"FLVPlayer_Progressive.swf\" flashvars=\"&MM_ComponentVersion=1&skinName=Clear_Skin_1&streamName=serpende&autoPlay=fal se&autoRewind=false\" quality=\"high\" scale=\"noscale\" width=\"320\" height=\"240\" name=\"FLVPlayer\" salign=\"LT\" type=\"application/x-shockwave-flash\" pluginspage=\"http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash\" /></object>";
     strNoScriptBlock += "</noscript>";
     string strScriptBlock = "";
     strScriptBlock += "<script>";
     strScriptBlock += "callFLVP();";
     strScriptBlock += "</script>";
     ScriptManager.RegisterClientScriptBlock(this, typeof(string), "strScriptBlock", strScriptBlock, false);
     thumbLiteral.Text = strNoScriptBlock;

Let's check this first;
If you have problems with current Shockwave Flash plugin versions then check this:
* see if there are updates for your graphics drive drivers
'''https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration'''
* disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
'''https://forums.adobe.com/message/4468493#TemporaryWorkaround'''
* disable hardware acceleration in the Flash plugin
'''https://forums.adobe.com/thread/891337'''
See also:
* '''http://kb.mozillazine.org/Flash#Troubleshooting'''

My ant video player after i updated to firefox four is now in the upper part of the screen where it opens up and i cant find out how to fix it

my ant video player after i updated to firefox four is now in the upper part of the screen where it opens up and i cant find out how to fix it

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Video player update issue on Satellit P850-12x - build version different

Similar Messages

Maybe you are looking for