Video Podcast resolutions and iPod not mixing?

When I go to export my video file from iMovie I change a few settings for output so that the video resolution is larger than 320x240. People have been telling me that they're not able to put the podcast on their video iPods. What do I have to do to get it to be able to go on their iPods?

OMG, thank you! someone who actually has the same problem as I do. Could you specify which podcasts don't sync?
By the way, the hosts are being lazy, they won't answer to this problem for some reason

Similar Messages

I am having trouble looking at video podcasts on my ipod touch. they are all greyed out. I have tried removing them and resyncing. this did not work. any ides?

I am having trouble looking at video podcasts on my ipod touch. they are all greyed out. I have tried removing them and resyncing. this did not work. any ideas?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all media and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Videos for iTunes and iPod

I have a lot of films I've downloaded in .avi format. I mostly watch them on my MacBookPro using the freeware VLC, but when it comes time to travel I'd like to have them ready to watch on my iPod Classic.
Is there a way to convert these .avi files not only to for the iPod (which I know I can do via "export" in Quicktime Pro) but also to play from within iTunes at the same quality level they are as .avi files?
Meaning, is it possible to have just one version of a video that will look as good on the 15" laptop monitor as well as an iPod Classic?
Also, if this is possible, is there a way to batch process all of these .avi files I have? With QT Pro I'd have to do it one by one.
Thanks...
Scott

Well if you can convert it and it still looks good on the "big" screen, then it will look fine on the iPod.
Frequently asked questions about viewing and syncing video with iTunes and iPod
http://support.apple.com/kb/HT1708
GUIDES TO: Converting Video for iPod - Mac & Window
http://forums.ilounge.com/showthread.php?s=&threadid=123067
The Complete Guide to Converting Video to iPod Format (Mac)
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-convert ing-video-to-ipod-format-mac/
See other tutorial articles over at iLounge...
http://www.ilounge.com/index.php/articles/tutorials/
Cheers,
Patrick

Video podcast syncs to iPod touch, but can't be found afterwards?

I have a number of podcasts on my iTunes. When these sync to my 3rd Generation IPOD Touch, the audio podcasts show up in the podcast list on the IPOD, but I have to search for the video podcasts as they are not on in any of the folders. This started happening when I upgraded to ios 5. Does anynoe else have this problem? Is there a fix?

Did you check under Videos icon instead of under Music icon?

Few bugs: Video podcasts name and 12 / 24 time format

As a gift for NY I got iPod nano 5th.
Of course device look great, but...
1) I am used to watch video podcasts (CNET) on iPod. My previous iPod nano (3rd) displays podcast's episode name if I click center button during playback. It shows time than episode name at the top of screen, very handy to watch a set of episodes. My new iPod nano (5th) displays only time. So, I need stop playback and go to episodes list to check "now playing" episode name, very frustrating. Is it a bag or stupid restriction?
2) Occasionally my new iPod nano (5th) lost 24 h time format and start display AM/PM. I can't recognize why it happen, but I should go to settings to correct this. And Pedometer daily activity bars graph always displays time in AM/PM despite of time format settings. Is it a bug?

If the solutions cannot be found in the iPod Nano 5th Gen. User Manual or Apple's Knowledge Base - http://support.apple.com/kb/index?page=search then it is time to call U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273).

How can I move someone's hair from one photo to another and place it on another person? I have gone through every instructional video you have and have not been able to master this

How can I move someone's hair from one photo to another and place it on another person? I have gone through every instructional video you have and have not been able to master this

Open picture B, the one you wish to select the hair from to add to the picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the hair. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the hair to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position the hair from picture B.
In the layers palette you should see picture A as the background layer, and the hair (B) on a separate layer.

Hi Def video is jumpy and will not play back smoothly in FCPX

I have the latest version of Final Cut Pro X only an older, but fully compatible IMac, and have a new Panasonic AG-Hmc 40P video camera. I have shot video on my Gro Prop Hero 2 and the playback of the unedited video is perfect, but as I scroll through the unedited footage shoot by the Panasonic, the video is jumpy and will not play back smoothly. The video plays perfectly on the the camera in play back mode, but in FCPX it is junk.
Do I have an incorrect setting that is doing this? I adjusted the palynack in preference but that made no difference. I need help?

FYI...
There's a hidden feature in Mac OS X Lion that you can use to convert your video footage to Apple ProRes with very little effort and to the right specifications...
Bring your video footage into your desktop or hard drive and then select all of them, and then right-right click on one of them to bring up the options menu... select ENCODE SELECTED VIDEO FILES. Mac OS X will take care of the rest for you automatically.
If this option doesn't show up, make sure to install those codecs I recommendad earlier...
ProApps QuickTime Codecs v1.0.1
http://support.apple.com/kb/DL1396

TS1382 I'd like to listen to just the audio portion of a itunes video podcast. I do not want the video in my library or on my ipod. Is there a setting which allow this?

Any help would be appreciated as I really want to hear the podcast on my Nano- not view it because I listen to these podcasts while I drive.

You can change the Media Type of the podcast to Music in iTunes from under the Podcast's Options tab of its Get Info tab., but other than that there aren't really any other options.
B-rock

Video podcast format for iPods

I created a video podcast and the RSS feed was successfully accepted by iTunes.
The first two episodes download through iTunes fine. The only problem is that the video file would not transfer to any video iPod. The first two episodes were 320x240 .mov files.
So, I read some sites and found out that it needed to be a .m4v file. I edit the show in iMovie. After finishing the third episode, I used iMovie to "Share to iPod" which I figured would format the file into a proper format for an iPod.
The 3rd episode is uploaded onto the RSS feed, but iTunes doesn't recognize this and make the file available for download. It still only has the first two episodes for download.
Any suggestions? Do I need to use Quicktime Pro and use that to convert the files?
If it helps, here is a link to the feed in iTunes.
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=214350353
Thanks for the help in advance.

I dont know about doing it the "easy" way with apps that do all the work for you. Here it is the "hard" manual way.
You should create a graphic specifically for this purpose and upload that JPEG file to the pace where your podcast episodes are hosted. Then you can post the URL of the picture into your RSS feed, in the top part where all the main info about your podcast is. It should look like this:
<itunes:image href="http://www.kutvfreshair.com/podcast/bloopersLogo.jpg" />
where the "href" is the http of your picture.
G5 dual 2.7 Mac OS X (10.4.2)

Touch syncs video podcast by wifi, but NOT by Mac itunes transfer

Trying to sync a video podcast from iTunes. (Brigitte Dale)
Oddly enough it downloads if selected through iTunes on the iTouch (2.2).
But gives the error about not transferring with Mac iTunes (v 8.0.2).
The videos are 28.49 fps, mpeg-4 (perian) 424 x 318 millions. about 2400 kbits/sec
Files are MOV.
Convert to IPOD format not available from right-click.
Selecting it in the advanced menu has no effect.

You are correct about things not adding up.
My ipod touch weirdly doesn't show up on the desktop or on itunes BUT it will always launch iphoto and ask if I want to download the two photos (which I downloaded from iphoto INTO the ipod, go figure).
Photos copy only one way - iTunes to iPod. Not the other way around. Could it be that your iPod is being treated as camera? You can disable your computer from recognizing the touch as a camera. See this article: http://support.apple.com/kb/TS1501
I have been synching my podcasts by using our house's wireless.
Wireless syncing is not supported. You can connect to iTunes and download, but you can't sync with your computer wirelessly.
As far as iTunes not recognizing your touch, a piece of software - Apple Mobile Device Services - needs to be operating correctly. See this article for help on troubleshooting problems: http://support.apple.com/kb/HT1747

Transfer Music + Videos + Podcasts + Photos from iPOd to iTunes

This is the same case of old PC crashing. I noticed there are a lot of ways of transferring music files to a new iTunes. Is there a way to do the same with video, podcasts and photo files as well?
iPOD video Windows XP

Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed above your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows. The procedure is a bit involved and was written long before iTunes 7 so it requires a little adaptation, also it won't recover playlists but if you're interested it's posted in this thread: MacMuse - iPod to iTunes
If you prefer something more automated then have a look at the third party utilities listed above they are generally quite straightforward and simple to use. Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.

Video Podcast issue with iPod Video

Hi
I just upgraded from 60GB photo to 80GB video and am having problems playing back some video podcasts. It plays back some but not others. The ones that don't work have audio but the video is jerky, i.e. it looks as if it is playing a still slideshow. I have checked the problem videos in iTunes and they play fine in there.
Regards, Simon Smith

If anyone knows of an answer to this problem, I'd be grateful as well... having the same thing happen with a couple of my video podcasts as well.
Cheers,
Darren

ITunes Not Responding and Ipod not Updating

Everytime I connect my Ipod to the usb, it shows up on itunes and as a drive. But when usually the ipod should be updating, it brings up a window saying itunes isn't responding,giving me options to send the error report or not, and then no matter which i choose, itunes closes and ipod does not update. Even if I reopen itunes, the difficulty happens again.Please help. I have updated my ipod with the latest updater and reinstalled iTunes.
THANKS

This may help -- not sure you've got the exact problem I had, but worth a try:
http://discussions.apple.com/message.jspa?messageID=1548774#1548774

TS1559 I must say I am very dissapointed with some of apples ethics. I have spent thousands of dollars on iphones and ipods not to mention hundreds in the itunes store, I now have a iphone for I cant even get wifi or bluetooth on?

I have tried every suggestion availiable. I have no service to my iphone 4 and would just like to use it as an ipod. I cannot connect to wifi no matter what I do, infact i can't even turn on wifi because it is will not move, like it is frozen or something. I am really choked that wifi and bluetooth are not availiable to me. I also dont not understand the reasoning in charging me 35 dollars to talk to someone about a products apple sold and provided me with. I have spent thousands of dollars on apple products over the last few years for kids, myself, and family, not to mention I have spent thousands in the Itunes store for these products that are of no use to me. It absolutely disgusts me! I also bought an i pod touch for my stepson four or five years ago. He came to me the other day and asked me if he could use one of my Ipods. I asked him where his was? He told me it never worked right from day one and kids being kids, he never told me. So I plugged it in charged it up and all it does is is make static when it's turned on. You cant even listen to music on it. with head phones or otherwise.

Do you have a question?

Adobe premiere elements 12 video is slow and does not match sound

after uploading the clip to edit into premiere elements 12 the video clip is slow, it doesnt match with the sound which is on point, when played back the video is choppy and skips a few clips, how to fix this please? this makes me reconsider actually buying this program, this does not happen with windows movie maker.

lingling1234
Could you please review the following and determine if you have been there and done the following.
At the onset, have you assure that you have the latest version of QuickTime installed on your computer with Premeire Elements 12?
If you go to Edit Menu/Preferences/Scratch Disks, where do you have the categories directed and how much free hard drive space is there?
Assuring project is set so that project preset (project settings) match properties of source media....
Open Premiere Elements 12 to its Expert workspace.
Go to File Menu/New/Project and Change Settings.
In the Change Settings area, change the project preset to
NTSC
DSLR
1080p
DSLR 1080p@ 29.97
Before you exit that area (in the last dialog that you see - new project dialog), make sure that you have a check mark next to "Force Selected Project Setting on This Project".
Back in the Expert workspace,
a. If you attach your camera to the computer with USB, the select Add Media/Videos from Flip or Camera/Video Importer.
In the Video Importer Source: locate your camera. Set the Save In:, put a check mark next to the videos you want imported, select the choice Add to Timeline, then hit Get Media.That should put your video in Project Assets as well as on the Timeline.
b. If you have your files saved to the computer hard drive, then use Add Media/Files and Folders to get you video into Premiere Elements Project Assets from where you drag your video to the Timeline.
Either way, do you see an orange line over the Timeline content (I am not talking about the orange line that runs horizontally through the clip). Hit the Enter key. Does the Timeline content play back in the Edit area monitor or does a Render dialog pop up? What does the playback look like and sound like in either case? Is anything improved at this point from what you were getting before?
If same as same as with the above, there would be series of questions about your computer environment.
We look forward to your results if you get a chance.
Thanks.
ATR

Video Podcast resolutions and iPod not mixing?

Similar Messages

Maybe you are looking for