Video podcast will not start

After I downloaded the video-Podcasts and I want to start them, nothing wil happen.
The audio-podcats are functioning okay.
I have got the latest version of Itunes en Quicktime player installed.
Who can help me?

When the Sync finishes, do you see a message saying something like "video xxxx has not been transferred to your iPod because it cannot be played on this iPod"? If so, you could try highlighting the video in question and clicking on *Advanced/Create iPod or iPhone version* (it will be different wording if you are using iTunes 7 or earlier!).
However, unless iTunes 8 has "improved" this feature, it takes along time to convert and it does not always work. I gave up with the conversions.
The "problem" is probably caused by the Podcast producer changing the format of their Podcasts, possibly for a good reason. Check first in iTunes or even on the Podcast producer's web site, do they have a different Podcast (of the same programme) especially for the iPod and you are downloading the wrong one?
(Out of interest, what is the vid Podcast you are referring to, did you subscribe to it in iTunes?)
After that, you could try contacting the Podcast's producers to let them know what has happened. Bear in mind though, that Podcasts are produced independently of Apple/iTunes and are intended for all makes of MP3, not just iPods. So they may not care that only iPod users cannot watch it.
Good luck.

Similar Messages

Video Podcasts Will Not Sync; Audio Podcasts Do

I recently upgraded my iPhone 4 to the ios 5. Now when I sync my iPhone to iTunes, my video podcasts will not sync. I have not changed any of my settings, and I noticed "All podcasts" is selected under Podcasts section. Audio podcasts sync fine. All was fine until I did the recent software upgrade. Any ideas? Thanks for your help.

They are there. They are now under the "Video" app on the first page of your device. Seems like a pointless change to me. It took me a couple of days to find mine, too.

Video podcast will not upload onto iPod. Dimension changed!problem!

I usually subscribe to a specific vid podcast but lately i have noticed that my ipod will not sync the new vid podcasts. it's very frustrating! i have had a closer look and realised that the vids that don't sync into my iPod have a larger dimension 852x480 compared to the old 480x270. This is an MPEG-4 file. What is the problem? What should i do? Can i adjust the dimension? if yes how? I'm not sure if this is the problem but if there are any suggestions i'd appreciate them.

When the Sync finishes, do you see a message saying something like "video xxxx has not been transferred to your iPod because it cannot be played on this iPod"? If so, you could try highlighting the video in question and clicking on *Advanced/Create iPod or iPhone version* (it will be different wording if you are using iTunes 7 or earlier!).
However, unless iTunes 8 has "improved" this feature, it takes along time to convert and it does not always work. I gave up with the conversions.
The "problem" is probably caused by the Podcast producer changing the format of their Podcasts, possibly for a good reason. Check first in iTunes or even on the Podcast producer's web site, do they have a different Podcast (of the same programme) especially for the iPod and you are downloading the wrong one?
(Out of interest, what is the vid Podcast you are referring to, did you subscribe to it in iTunes?)
After that, you could try contacting the Podcast's producers to let them know what has happened. Bear in mind though, that Podcasts are produced independently of Apple/iTunes and are intended for all makes of MP3, not just iPods. So they may not care that only iPod users cannot watch it.
Good luck.

Video podcasts will not go to video podcasts folder

I have a smokin new 80g ipod video. A video podcast i would like to watch will only show up in the regular podcast folder. The video podcast folder remains empty despite some effort. any ideas?

Well it came marked as movie. I changed it to music video. It now works on Ipod under music video file but why wont it go to Videopodcast file. Is it a problem from the podcaster?

Video Capture device will not start

P$ system runninf XP Home SP1a. The nVidia WDM video capture will not start. Any suggestions?

Yes. I tried the MGA and the vesa driver and it still goes back to the text login and console. Funny thing is that I can do a video control and change the color of the font - but I get no joy on the graphical interface!

Podcasts will not sync to Classic

I'm at a complete and utter loss.
One day updated podcasts stopped syncing to my iPod Classic. I've done everything I can think of, google searches, asking friends and can't come up with a solution.
Here's what I've tried:
-Checked my anti-virus software
-Rebooted
-Restored
-Uninstalled/Reinstalled iTunes
-Used a different USB port
-Used a different connector
-Tried different settings on iTunes, including selecting manual syncing.
I don't know if this problem is hardware vs. software. Right now here's what's happening. After one of the restores, I deleted all of my podcasts and resubscribed to see if that would help...it didn't. I can download audio and video podcasts onto iTunes, when I connect my iPod it indicates that it's syncing but my iPod states "no podcasts". I'm not sure if perhaps the podcasts are in a different folder under My Music, but last I checked the podcasts were in the Music>Podcast folder.
I don't know if I'm missing some vital step but I'm literally losing my mind trying to figure out what's happened and would love any/all suggestions.
One other thing. I ran the Sync Diagnostic on iTunes and it said that no iPod could be found. This is strange because when I do my restore, all of my old music library syncs, just nothing new.

Ah! That explains a lot, Video Podcasts are a mystery on the Classic!
Do you get any messages when you Sync these Podcasts? Some video Podcasts will not play on the iPod Classic and therefore they don't get transferred to the iPod. However, in that situation, I would expect you to see a message telling you something like "Some Podcasts were not transferred to the iPod because they cannot be played on this iPod."
You can't miss the message, so if you don't see it, the Podcasts must be on the iPod somewhere. However, I've noticed that video Podcasts can be almost anywhere on the iPod Classic, not sure why.
For instance, I have video Podcasts from different providers which are all in the iTunes U section in the iTunes library - even though they are not "educational." But, on the iPod, some of them are in the iTunes U section, while others are in the Music section. And guess what? The search facility does not find items in iTunes U! I have inspected the videos in iTunes but I'm unable to see why they should be in different sections of the iPod.
So, first of all, where are these videos in the iTunes library; Podcasts or iTunes U? This may give you a starter about where they are on the iPod and look (obviously) in the iTunes U on the iPod.
If you can't find them in iTunes U, try looking in the Video Playlists. Note, Video Playlists is separate from Playlists, so if necessary, place Video Playlists on your Main Menu. Even then, in the Video Playlists, all is not simple. Also on my Main Menu is Videos/Movies and some of my rogue video Podcasts are in there!
Example:
in the iTunes Library;
Library/iTunes U/History 106B
Library/iTunes U/Shulton: Old Spice (adverts)
both in the same section, next to each other.
Start from iPod Classic - Main Menu:
Videos/Movies/Shulton: Old Spice (- only)
Videos/Video Playlists/iTunes U/Shulton: Old Spice (- only)
Video Playlists/iTunes U/Shulton Old Spice (- only)
Playlists/iTunes U/History 106B (-only)
Spot the difference?
So in other words, I cannot find these Podcasts all in one place on the iPod - to put it another way - iTunes U in one section has Old Spice but not History, and iTunes U in another section has the History but not the Old Spice! I could go on, the History appears under some, but not all of the Music Menu subsections while the Old Spice is not on the Music Menu at all!
It's mind numbing! It's one area where Apple doesn't appear to have got it right and unfortunately, I don't think that it will ever be sorted out. Often, this issue can be as a result of how the Podcast producer tags their videos, which may explain why the problem has just started. But how anyone sorts that out is beyond me too because different models of iPod act in different ways.
So have a good look through your iPod for the missing episodes, good luck, let us know how you get on, do you find them?
Phil
P.S. On my Videos/Music Videos menu header, the iPod states "No Videos" but when I look in there, I find two videos! ??

HT1386 I have Mac itunes and a touch 2G. My wife has Win7 and touch 4G (both iOS 4.2.1). She got a new iphone, I now have her touch 4G, and am trying to sync it to my Mac itunes. The music and videos sync, but apps & podcast will not. All checked to syn

I have Mac itunes and a touch 2G. My wife has Win7 and touch 4G (both iOS 4.2.1). She got a new iphone, I now have her touch 4G, and am trying to sync it to my Mac itunes. The music and videos sync to the 4G, but apps & podcast will not. All are checked to sync. During sync, it gets to "determining apps to sync" then immediately goes to "finished syncing". No apps or podcasts from my Mac itunes are on the touch 4G.

You can only sync to one iTunes library but you can manage music and videos among different computer/libraries.
It appears that you are trying to sync with a different library.
- If you want to make the Mac you syncing computer:
--- Connect the iPod to the computer and make a backup by:
iOS: How to back up
--- Restore the iPod from that backup. Note that synced media like apps and music are not in included in the backup.

I am trying to download a video from the BBC iplayer and the downloader helper will not start. How can I solve this problem

I am trying to download video from the BBC iplayer and the download helper will not start. How do I get it to start?

No, this reply is not helpful. It simply generates this little gem:
"This service requires the conversion feature to be enabled.
Configure conversion ?"
And the same clicking on buttons that makes nothing happen and going around in circles with the escape key.

ITunes will not start up... Keeps giving Windows Error Message.... help!!

My Itunes will not start at all... When I try to start it I get a Windows Error Message saying below:
*iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.*
*In the Error Window The following is there...*
_AppName: itunes.exe AppVer: 8.0.1.11 ModName: quicktime.qts_
_ModVer: 7.55.90.70 Offset: 00990007_
Can Anyone help me as I can’t use my ITUNEs and am Handicapped when it comes transferring ITEM on and OFF my IPHONE...
Thanks

That error suggests you may have a QUicktime problem rather than an iTunes problem.
Have you installed any of the following:
ACE & K-Lite mega codecs package, QT alternative, Storm codec, WinAVI video converter, Mpcstar, (possibly starcodec pack, 3ivx)
If so uninstall them. They are bad news for Quicktime.
Then download the version of Quickime without iTunes:
http://www.apple.com/quicktime/download/win.html
Now Remove Quicktime using the method for Quicktime in this article (just Quicktime):
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
When you come to your C:\Windows\system32\ folder you can delete any file or folder with Quicktime in the name.
Restart you computer
Install the stand alone Quicktime and check if it starts.
If it does you are in a position to find out if iTunes is OK.

After Upgrade, Windows Service will not start automaticly

I just upgraded from 10.2 to 10.4. When I did the Windows File Service, will not start automaticly. I can start it manually, after a reboot. Any idea on how to fix this?

I am having the same problem on a clean install of Server 10.4.10, AFP & Web starts automatically on restart, but not Windows Service. This is the first time I have run into this, it starts fine on all other servers I administer. Then entry in /etc/hostconfig for SMBSERVER is set to "-YES-", there is no errors or messages of any kind in the console or system log, it just won't start.
This complicated with the problem I am having on the same server where I cannot connect via ARD after reboot without someone there physically plugging a monitor into the video port first (another open post I have - http://discussions.apple.com/message.jspa?messageID=5850246#5850246 ). So, doing maintenance at off-hours is almost unworkable.

System will not start

T60 will not start. While turning on and initiating system, it died suddenly. Even the battery light was not illuminated. Battery part# is FRU P/N 42T4504. Should the system still start with the AC adapter, even if battery has died? Are others having problems with this battery?

I had a similar problem, it ended up being much less of an issue than I originally thought.
THis was my problem, maybe its similar to yours.
When doing any type of CPU or GPU intensive work, such as video encoding, or even playing a flash application with lots of things going on, it would jsut die. Lights out, not even the battery or charging lights would come on. Pressing the power button would do nothing either. I had to unplug, take the battery out, put it back in, wait about 10 mins then restart and pray for no BSOD.
I thought it was the power source, but since it was just shutting off randomly, (a symptom of an overheating GPU or CPU) I decided to clean out the fan first (I was out of warrenty).
If that sounds like your problem, I recommend you try the following. If it doesn't fix it, then you're out about $15 and a half-hour of your time. If your machine is out of warrenty, or if you don't want to wait a couple weeks for your laptop to return from the depot, definitely try this. Its cheaper then paying for repairs, and cheaper then getting an assessment of the problem.
Go to a computer parts store, bought a good tube of thermal paste (cost like $15) and some compressed air. Get the good stuff if you have a good processor. It works much better than the stock stuff.
First unplug your laptop, take the battery out, then Unscrew the Screws at the bottom that hold the palmrest, Keyboard down (they'll be marked) then the screws that hold the bezel (not marked).
Once those are off, draw a quick sketch of the inside components, and as you take screws out, label on your sketch the size/colour of the screw, so everything goes back in correctly.
Then, you'll need to take the top left speaker out, and two metal 'arms' that hold the Fan in place. The fan should then pop out. If there's another screw I'm forgetting about, take it out too.
On the fan, your CPU and GPU, there will be old thermal paste. With a lint-free cloth, with a bit of 70% rubbing alcohol, clean the paste off. Be sure to use something that won't leave residue. Things like TP, kleenex, etc are bad. Coffee Filters work pretty well.
Now with the compressed air, spray out the inside of your laptop, spray the fan out well, and anything else that looks dusty.
Now put a bit of the thermal paste on the CPU and GPU, and pop the fan unit back in place, screw it in immediately. Put the rest of the components back together, and while you're at it, take the time to blow out your keyboard, as I'm sure its full of dust, crumbs ,hair, and other fun stuff.
This would likely solve your problem for under $20. And best yet, you don't have to ship your laptop away for a few weeks.
In my case, I thought there were bigger problems. After cleaning/replacing the fan, I haven't had an issue at all, its been a few months. I can encode video, run graphically intensive programs/games, etc. without an issue. CPU/GPU temps don't get nearly as bad as they did.
Hope that helps your problem.
T61 15.4" T9300 (2.5GHz 6MB L2) Windows 7 Professional x64 4GB Memory, NVidia Quadro NVS 140M

Compressor 1.2.1 will not start

I have FCP HD 4.5 Studio. I have created several projects using almost all the modules (except Cinema Tools) and everything has worked fine...until yesterday. Compressor 1.2.1 will not start and I don't know how else to get my finished video from FCP to DVD SP. I tried to export it as a standalone QT movie and let DVD SP do the work, but it says the bitrate is too high.
Any suggestions?
Thank you in advance,
Lloyd Lathrop

I downloaded the update from http://www.apple.com/support/downloads/compressorupdate.html (there are 2 updates that can be downloaded...just select the one you're using). I just ran the updater and it seemed to fix everything.
Hope this helps.
Lloyd
G5 dual 2G Mac OS X (10.4.4) 1.5GB RAM, 160G internal, 160GB Firewire, 120GB Firewire

Dowload help queues up but will not start. Any ideas?

My download helper places a download in the queue but will not start. I have a linux machine and a windows machine they are both doing the samething. A friend who has three computers has the same issue on all three. Any ideas. We have refreashed firefox. Reinstalled download helper and set all the updates. I have set all the conversion points as directed as well.

See:
*https://addons.mozilla.org/firefox/addon/video-downloadhelper/
<blockquote>We are aware of downloading issues when using Firefox 36.
We have been working for months on a 100% new version which works on Firefox 36+ (it does not work on Firefox 35 and below) and we just released a first test version. If you want to test this version and provide feedback on it, please follow this link.</blockquote>
You can find a beta version here:
*https://groups.google.com/forum/#!forum/video-downloadhelper-5

Adobe Premiere Elemens 9 will not start

Hello,
My system is Windows 7.
When I want to open a new, or want to start an existing project the programm will not start en I recieve this message:
I have uninstalled Premiere Elements 9 and after that installed it again.
But the message mentioned here above still appears.
Then I used the Premiere Elements exe file but still the same.
When I use the help file a message appears that says there is an update available.:
I click on "download now" but after a short moment appears "download failed"
Error nr. 16822
Who can give me a good advise.
Thanks very much

ad hessels
Is Premiere Elements 9 a new program for you - has it worked before but not now or has it never been used and/or worked before? It appears that you are trying to run the program on Windows 7 (64 bit assumed).
Right now the only thing that you want to be downloading for Premiere Elements 9 is the 9.0.1 Update. You can do that without Premiere Elements 9 opened with the following download from Adobe via this link
Adobe - Premiere Elements : For Windows : Premiere Elements 9.0.1 update
If you could get into the program, then you could do this update via a project's Help Menu/Update.
1. Do you have the latest version of QuickTime installed on your computer?
2. Are you running the program from a User Account with Administrative Privileges and also Run As Administrator applied?
3. What video card/graphics card does you computer use and is it up to date according to the web site of the manufacturer of the card?
Does your computer use 1 or 2 video card/graphics card?
4. Does the problem exist with and without the antivirus program disabled?
Several productive areas of troubleshooting that we may be exploring after more details are supplied include
1. Deactivation from within the program (if you can get into a project); uninstall the usual Control Panel route; ccleaner run through (regular and registry parts); reinstall with antivirus and firewalls disabled.
CCleaner - PC Optimization and Cleaning - Free Download
2. Deletion of the Adobe Premiere Elements Prefs file and/or the whole 9.0 Folder in which it exists.
3. Deletion of the BadDrivers.txt file.
Many of these ideas will require that you be using an active Folder Option for Show Hidden Files, Folders, and Drives.
4. Other
Please review and consider and then we can decide what next.
Thank you.
ATR

HELP urgently needed: My Sandberg FireWire for Laptop will not start on my T60

Let me start with information on my T60:
OS information: Microsoft Windows XP
OS version: 5.10.2600 Service Pack 2
Processor: x86 Family 6 Model 14 Stepping 8
Memory: 3.135.856 kb
BIOS version: 2.09 (79ETC9WW)
Machine type-Model: 1951A47
I have just got a new Sandberg FireWire for Laptop, a PC Card with 3 6-pins connectiont. After inserting the card in the PC Card slot, the Windows Device Manager tells me that there are problems with the card. Looking at the 1394 Card Properties the status says:
"This device cannot start. (Code 10) - Click Troubleshoot to start the troubleshooter for this device."
The troubleshooter did not solve my problem. I have tried disconnecting, re-connection, shut down Windows and start again etc.
At Sandberg Help Desk they tell me that I have two slots in my laptop, one with a 16 bits bus and another with a 32 bits slots, and I should use the latter. It seems that I can use the lower slide only in my laptop and I cannot push the card into the upper slide. There is not enough room for it.
Here is what I found on Lenovo's support site on my type & model:
PC Card
Conforms to the PC Card Standard 95
Type II slot
Both the 16-bit Release 2.1 card standard and the 32-bit CardBus card are supported.
Have a look at these screen captures.
What should I do to solve my urgent problem!?
Message Edited by pbl_ibm on 10-09-2008 05:10 AM
Message Edited by pbl_ibm on 10-09-2008 07:27 AM
Message Edited by pbl_ibm on 10-09-2008 07:45 AM
Message Edited by pbl_ibm on 10-09-2008 07:45 AM

garytr23 wrote:
Sounds to me like a driver configuration problem. Maybe something bad happened during driver install. I would recommend uninstalling the device from device manager by right clicking on it and hitting uninstall. Reboot the computer. Have a go at it again. Also, test your pcmcia port functionality by finding and plugging in a different card. See if that works. It might need repair.
Message Edited by garytr23 on 10-09-2008 09:41 AM
The status right now is:
The PC Card reader works on my T60
If I use a Firewire PC Card it will not start - as described above (on T60)
The PC Card work properly on my T61P - and I succeeded importing a video file from a digital camera using the Fireswire PC Card.
So what does a wise man do in this situation??
Please help me as I urgently need to know how to solve this serious issue!!
Have you got an idea? Can I import the video in another way??
Message Edited by perbuch on 10-12-2008 07:55 AM

Video podcast will not start

Similar Messages

Maybe you are looking for