Video podcast window only full-screen

Dear Common Wisdom:
I just upgraded to the new iTunes 9.0.
I used to be able to resize the window of my video playing podcasts so I can listen to them or watch them in the corner of my monitor while doing other work, but now it only runs in full-screen mode.
What gives?
How can I adjust my window size?
Thanks!
Kostas

Not sure if this will help, but on my ACR to the right of the Preview checkbox there is a window-double-arrow symbol that toggles full-screen mode in ACR so even if ACR started up in full-screen you could unmaximize it and then resize it somewhat smaller. I don't know how to start it up non-maximized in the scenario you describe because I don't use that scenario and my ACR starts up in whatever mode I last closed it, full-screen or not.

Similar Messages

Adobe Camera Raw window-Only full screen?

I use Elements 7.0. In an attempt to improve my photography, I’ve been concentrating on getting as close to a proper exposure in camera using zone system etc. To further get close to the appropriate exposure after the shot is taken, I’ve begun to shoot in raw. I’ve bought a couple of books, videos etc. and I’m getting the basics down fairly well.
I have one basic question. I’ve searched help both in Elements and within this forum and I can’t find anything that addresses my question.
When I select a nef image (Nikon D90) in the Organizer and go to “Edit” and then “Full Edit”, the Adobe Camera Raw box opens up in full screen with the selected image displayed. No part of the desktop is displayed, including the taskbar.
Is there a way to open up ACR that is not full screen? I’m so new that I still need to refer to help to figure out what certain sliders do. I have a 25.5 diagonal monitor, so I have the screen real estate to have a fairly large ACR window while at the same time displaying a help screen.
Thank you for your input.

Not sure if this will help, but on my ACR to the right of the Preview checkbox there is a window-double-arrow symbol that toggles full-screen mode in ACR so even if ACR started up in full-screen you could unmaximize it and then resize it somewhat smaller. I don't know how to start it up non-maximized in the scenario you describe because I don't use that scenario and my ACR starts up in whatever mode I last closed it, full-screen or not.

Youtube videos lag/freeze on full screen when mouse is inactive, but only in firefox.

I absolutely HATE IE, so I hope we can find a solution to my problem.
Pc info: Win 7 64 bit, 2.9 pentium with 4 gig ram
video: radeon HD 3800
Three days ago I was infected by some malware. While i had it i could not watch videos on youtube in full screen unless i constantly moved my mouse. I uninstalled the malware and it didn't help. I reinstalled videos card drivers (even tried the new beta drivers), firefox, adobe flash, java 32 and 64 bit, and performed these steps: http://techlogon.com/2012/06/04/flash-player-crashes-in-all-web-browsers/
I've reset Firefox, emptied cache in Firefox, and manually deleted all program temp folders I could find. Also, I have disabled all add-ons and plugins, and even ran Firefox in safemode. Nothing seems to work.
There may be a few things I've forgotten that I've tried.

well, in windows safe mode, it seems to play the video in full screen without the mouse moving, but while playing (normal or full screen) it either restarts the video several times or straight crashes the player.

Whenever I attempt to watch a video of any sort full screen on Firefox my screen turns white but I can hear the video playing.

When viewing pics or videos in FireFox, when screen is enlarged to full screen, page turns white. While I can still hear audio, no picture. I have seen similar posting in problem questions, but solutions have all been closed out.
== This happened ==
Every time Firefox opened

I have same problem when watching web video and going to full screen it turns white. Audio is still good. If I hit escape all goes back to viewing the video okay.
It occurs in Firefox 6.3 & 6.8.3, Internet Explorer 8, and Google Chrome. Windows Media Player WILL go to full screen okay.
I wished I could submit 2 pics: one of video and 1 of the white screen. But I can't so I'm just sending the white screen pic
kenlorf

Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?

Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
Any way to fix it?

only $99, i thought it was closer to $175.

Have reset Firefox & completed all of steps in "Flash video won't play full screen on YouTube, Facebook and other websites", but video still won't work. Help!

I have reset Firefox, completed all the steps in "flash video won't play full screen on YouTube, Facebook and other websites". And the video still won't play in full screen. It will play, but frequently stops or sound continues and picture freezes. I have noticed that if I continually move my mouse, it plays fine. All these videos play fine in IE and Chrome.

Some problems with Flash video playback can be resolved by disabling hardware acceleration in your Flash Player settings. (See [[Flash Plugin - Keep it up to date and troubleshoot problems|this article]] for more information on using the Flash plugin in Firefox).
To disable hardware acceleration in Flash Player:
#Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
#Right-click on the Flash Player logo on that page.
#Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
# Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. <br/> <br/>[[Image:fpSettings1.PNG]] <br/>
# Remove the check mark from '''Enable hardware acceleration'''.
# Click '''Close''' to close the Adobe Flash Player Settings Window.
# Restart Firefox.
This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
Does this solve the problem? Let us know.

Windowed to Full-screen takes 3 attempts

I'm working on a program, and one of the features I want is to be able to toggle between Full-screen and Windowed modes. I've searched these forums (and google) and saw a lot of the bug issues with full-screen implementations were from JDK 1.4, but haven't found if those bugs still exist. I also haven't found anyone that's encountering quite the same problem I'm having, which is:
When changing the window (JFrame) from windowed mode to full-screen, it does a minimize-maximize loop 3 times before it finally goes full-screen.
I thought it might've been related to the many other parts of the code I had written to handle this (namely key events for global hotkeys), but in the following demo which is a watered-down version of what I'm doing, I still get the same problem. Only difference between this and the actual program is the actual program uses an input-action mapping instead of a button.
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class ToggleTest extends JFrame implements ActionListener {
    private GraphicsDevice graphicsDevice;
    private DisplayMode origDisplayMode;
    private JButton myToggleButton;
    private boolean isFullScreen = false;
    public static void main(String[] args) {
        new ToggleTest();
    public ToggleTest() {
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        JPanel tmp = new JPanel();
        GraphicsDevice[] devices = GraphicsEnvironment.getLocalGraphicsEnvironment().getScreenDevices();
        graphicsDevice = devices[0];
        origDisplayMode = graphicsDevice.getDisplayMode();
        JLabel myLabel = new JLabel("Test fullscreen");
        tmp.add(myLabel);
        myToggleButton = new JButton("Toggle");
        myToggleButton.addActionListener(this);
        tmp.add(myToggleButton);
        getContentPane().add(tmp);
        setSize(800,600);
        setVisible(true);
     * Toggles the screen between full-screen and windowed.
     * Implemented as a method for re-usability with code
     * that doesn't trigger action commands.
    private void toggle() {
        if(isFullScreen) {
            //Set to windowed mode
            dispose();
            setUndecorated(false);
            setResizable(true);
            graphicsDevice.setFullScreenWindow(null);
            setSize(800,600);
            setLocationRelativeTo(null);
            setVisible(true);
            validate();
        } else {
            //set fullscreen mode
            dispose();
            setUndecorated(true);
            setResizable(false);
            graphicsDevice.setFullScreenWindow(this);
            setVisible(true);
            validate();
        isFullScreen = !isFullScreen;
    public void actionPerformed(ActionEvent e) {
        if(e.getSource() == myToggleButton) {
            toggle();
}I tried messing with the graphicsDevice.setDisplayMode method, but in examples I've seen, it made the whole screen go black and to the specified resolution of the supplied display mode. I'd rather keep the native resolution regardless of being in full-screen or windowed mode, and instead of having the setDisplayMode(origDisplayMode) in both the windowed and full-screen declarations, I just removed it (with no seemingly ill effects).
I also tried removing the setFullScreenWindow(this) and just resized the JFrame to the current resolution, removed the decorations, removed the ability to resize it, and set it at the upper left corner, and this was a step closer to what I wanted. There were no minimize-maximize incidents, however the start bar was still on top. Reading the javadoc said if fullscreen mode wasn't supported that it would simulate it (which could be the case as the computer I'm testing it on has integrated graphics).
Any help would be appreciated.

That would be nice.
Would also be nice to have the visualizer full screen on the secondary screen and leave the pimary screen alone.
Suggestions here -> http://www.apple.com/feedback/itunesapp.html

How to open a window in full screen mode using lf_fpm_navigation?

Hi Guys
For the following applications
ESS Application: HAP_START_PAGE_POWL_UI_ESS
MSS Application: HAP_START_PAGE_POWL_UI_MSS
When the user clicks on the appraisal document name, a seperate window(not full screen) is generated to display the Appraisal docuemnt.
The code is as follows:
COMP: HAP_START_PAGE_POWL_UI
Object : COMPONENTCONTROLLER
Method: FOLLOWUP_POWL
Generate the URL to be called.
    CALL METHOD cl_wd_utilities=>construct_wd_url
      EXPORTING
        application_name = 'HAP_MAIN_DOCUMENT'
        in_parameters    = lt_parameters
      IMPORTING
        out_local_url    = l_url.
    wd_this->url = l_url.
    wd_this->display_document( ).
In Method: DISPLAY_DOCUMENT
lv_alias = 'EMPLOYEE_DOCUMENT_UI_OBN'.
use FPM navigation
    ls_nav_key-key1 = 'HAP'.
    ls_nav_key-key2 = 'HAP_GENERIC_UI'.
    lr_fpm_navigation ?= lr_fpm->get_navigation( is_key = ls_nav_key iv_instance_sharing = abap_false ).
    CALL METHOD lr_fpm_navigation->get_key_from_alias
      EXPORTING
        iv_alias = lv_alias
      RECEIVING
        rv_key   = lv_key.
    lr_fpm_navigation->modify_parameters(
         EXPORTING
           id_target_key            = lv_key
           it_application_parameter = lt_appl_param
           it_business_parameter    = lt_business_param    ).
    lr_fpm_navigation->navigate( lv_key ).
Any idea how to open this window in full screen?
Highly appreciate your help.
Thank and Regards
Pramod

Hi Pramod,
This FPM navigation is achieved using settings made in Launchapd Customizing ( LPD_CUST ).
a) Execute Tran LPD_CUST
b) Go to Role HAP - Double Click to open it.
c) Open the second folder on the LHS menu - there you will find 2 entries
d) Click on second entry - in the entry setting you can see that it is configured for WD Application - HAP_MAIN_DOCUMENT
e) Click on button Show Advanced Parameters
f) There you will find a input box named as Window Features - here you can specify window features like
height=700,width=1100,position=center,menu=no,status=no,location=no,menubar=no,status=no,toolbar=no
save the settings come out and test ur app again.
change the height and width and other features as per ur req.
Regards
Manas Dua

RMBP, Chrome, Youtube: Video delays when in full screen

Hi all,
I have a retina Macbook Pro running Mac OS X 10.8.2, Chrome 25.0.1364.99. When I watch youtube videos there is normally no lag. Once I switch into full screen mode, there's a slight delay where instead of the video the screen will show a blank white screen before switching to the video.
This results in a slight 0.5-1s lag of the video behind the audio.
Opening the same video on Firefox and going to full screen doesn't result in this blank white screen and does not result in video lagging behind audio.
Any suggestions?
Thanks in advance.

Thank you,
it also worked for me
simonsglcfc wrote:
Had the exact same problem the past couple of days, was really frustrating as it was making videos play delayed in full screen and I tried searching for it everywhere but couldn't find any solutions.
Anyway, what I did has fixed it as a temporary workaround:
1. In Chrome, type chrome://plugins in the address bar
2. Click top right to expand +Details
3. Navigate to:
Adobe Flash Player (2 files) - Version: 11.6.602.171
Shockwave Flash 11.6 r602
Name:
Shockwave Flash
Description:
Shockwave Flash 11.6 r602
Version:
11.6.602.171
Location:
/Applications/Google Chrome.app/Contents/Versions/25.0.1364.99/Google Chrome Framework.framework/Internet Plug-Ins/PepperFlash/PepperFlashPlayer.plugin
Type:
PPAPI (out-of-process)
Disable
MIME types:
MIME type
Description
File extensions
application/x-shockwave-flash
Shockwave Flash
.swf
application/futuresplash
FutureSplash Player
.spl
Name:
Shockwave Flash
Description:
Shockwave Flash 11.6 r602
Version:
11.6.602.171
Location:
/Library/Internet Plug-Ins/Flash Player.plugin
Type:
NPAPI
Disable
MIME types:
MIME type
Description
File extensions
application/x-shockwave-flash
Shockwave Flash
.swf
application/futuresplash
FutureSplash Player
.spl
You need to disable the first of the two entries...which I have highlighted in Bold above.
Hope that helps.

Is it possible to set a finder window to full screen mode,..

... like mail, itunes and other apps? and if not, why not?
I have to say it took me a bit to get used to Lion, I began complaining all day until I decided to take some time to learn it, and now I like it very much, I see the advantages over 10.6.
But still, there are some things I don't know about, and the window of opportunity to take time to learn more has closed. And I don't know when it'll open again.
So, that's why I have joined the community, because now I'm trying to use everthing on full-screen mode, and as I was setting my desktops to work on a project in which I will be needing a lot of finder windows open with a lot of items each, I instantly asked myself:
Is it possible to set the finder windows to full screen? because I don't see any buttons.
Thanks 4 Your Time
R.D.B.

Thanks Don Archibald,
Yeah, that's what I'm doing at the moment. But I thought it would be nice to have the little full screen button just to press it so.
Besides, I'm still figuring out the finder windows' behaviour. I discovered that if you open a folder from a window that has the toolbar, the new folder would also open with a toolbar, even if you already had it set it up with just the status bar.
And one thing that still enervates me is that if you have a window with two items, and you press the green button to fit the borders up tight, instead of leavin' the 2 items in a horizontal arrangement, it moves one to the bottom and puts a slider. Arrgh.
Another thing I haven't understood is why one folder I have on the dock sometimes opens with a column layout instead of the icon layout I have arranged for it before. Totally random 4 now, can't find the why.
Anyway... I'm going to order some lapel pins about 2 flags I designed for two embassies. Anyone know a good place for doing that?

Safari status bar disappears. I have tried clicking on show status bar and it will only appear when I move the cursor to the top of the screen. I can not minimize the open page only full screen or close the browser. Any idea how the rectify this

Safari status bar disappears. I have tried clicking on show status bar, under the View tab and it will only appear when I move the cursor to the top of the screen. I can not minimize the open page, only full screen or close the browser. Any idea how the rectify this issue?

One enters and exits full-screen with control+command+F keys. This is on the View menu in Safari. Optionally, the green traffic light in your browser title bar, if you roll over it, has the full-screen control it it. While in full-screen mode with Safari, moving your mouse pointer virtually up, and off-screen reveals the Safari title bar again, and you can click the green traffic light to exit full-screen mode.
You can hide/show the status bar by simply typing command+/. This too, is on the Safari View menu. and in 10.10.1 — it works reliably for me.

When i'm watching a You Tube Video, i go to full screen on the video , and it scrambled.. I hear the music, but loose the video..can someone help me???

when I'm watching a You Tube Video, i go to full screen on the video , and it scrambled.. I hear the music, but loose the video..can someone help me???
== URL of affected sites ==
http://www.youtube.com/

John0618. Did you ever get a response or solution to problem? I have the same problem (starting about three months ago).

How do I maximize a window to full screen with one click?

How do I maximize a window to full screen with one click? Lion 10.7.4.

If it is a full sceen App, some are some aren't, just click the arrow icon in the upper right hand corner.

Safari window to full screen.

Yes, a simple user question. How to get my Safari window to full screen?

Drag window's upper left-hand corner to the screen's upper left-hand corner, click and drag bottom right-hand corner resize triangle, and drag to the screen's lower right-hand corner. Why anyone would want to do that is beyond me, but that's it. AFAIK, there's no command shortcut that does it.

Two Second Skip Switching Between Windowed and Full Screen Modes During Playback YouTube videos

I am finding that every video I watch skips two seconds every time I switch back and forth from Full Screen mode. Happens mostly with 720p videos in YouTube.
Can be replicated by pausing the video (also possible during playback, pausing it was just to determine how long the skip is), switching to Full Screen and back, noticing the two second change on the timer.
Main operating environment is Opera browser on Windows 7 (x86), Flash ver. 11.1.102.55 and 12beta. I have also been able to replicate the problem on Internet Explorer ver. 9.0.8112.16421

I see about 30-80 MB memory usage increase while switching to fullscreen and it is falling back while switching back to normal mode.
I think the "freeing" of the memory is to agressive and produces such "lags."
@Adobe: This should be optimized with the next versions.
Update:
With the Plash Player plugin (Firefox Nightly/Opera Next) it is worse and with Active-X (IE9) it seems to be ok.

Video podcast window only full-screen

Similar Messages

Maybe you are looking for