Video Posting Problems

When I post a video through Instagram, iOS Messenger, Snapchat, or Facebook the app either says it's unable to or just crashes out of the app I'm on. What to do? I can't restore my iPod thought.

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Similar Messages

785gt-63e video post problems...

well, actually the title is deceiving... the on board video works like a champ so far...
it's the pci-e that seems dead...
tried two different cards, a 4650 and a 5670... same results for both - fan spins, card looks "alive" but no video... neither card needs it's own power supply, both draw power from the pci-e slot...
bios is set to "pci-e" for primary...
4 2gb sticks of g-skill old pc800 ram, and 635 propus quad all powered by some 3 year old rosewill 550 watter... not sure how good/clean the rail voltage is... same psu powered the same "guts" along with about 7hdd's on the cheapie ecs board that just got replaced...
again, on board video works like a champ... just having no luck getting video out of anything from the pci-e slot...
please help, and thank you

amd 635 propus 2.9 quad
785gt-63e
gskill pc 800, 2gb x 4
sapphire 4650
rosewill 550w 18A on the +12 rail (a bit low)
i'm not up to drives and the rest of the system yet... just have the board in the case with ram plugged in, all the minor case connectors hooked up etc...
i get nice quick boot with on board video and all 4 ram chips plugged in... i get video and can fool around in the bios etc... but no video with/from either a 4650 or 5670...

Problems with Youtube videos posted through Facebook

On my iPad1, since installing iOS5, happens this:
when I'm on Facebook, accessed through Safari (I'm not accessing through Fbook app), I can see all messages and Youtube videos posted by my friends. Only problem is that the Youtube videos are now much larger and they cover comments made by my friends and also the chances to Comment, share etc etc that are usually found under videos or pictures posted. Obviously this did not happen with the previous iOS.
Any suggestions ??
thanks

nobody really can answer this question, have posted a lot of questions in a forum. did a full restore, no backups, to no avail. i hope apple will do something about this. i hate to see youtube thumbnails covering some texts in facebook. by the way, have you already had this fixed?

MSI K7N2 Delta-ILSR, Mouse problem & Video off problem solved!!!

I find the following information that I collected very interesting at the very least...
Here goes...
The video off problem that I was having was directly linked to the mouse. Here, let me explain the video off problem. In the BIOS Have the Standby mode set to S3. The problem occurred when I started windows, then went into standby, then started back up, then restarted the computer, the monitor would act as if it were in sleep mode, or rather there was no signal being sent to the monitor. Well the odd way I fixed that is by plugging in a standard 2 button PS/2 mouse. Also this fixed the issue with the mouse sometimes not working in windows.
Here is how I tested.
Logitech MX700 Cordless Optical Mouse, PS/2 & USB= failed.
Logitech iFeel Optical Mouse, USB= failed.
Microsoft Cordless Ball Mouse, PS/2= failed.
Standard Artec (Cheapy brand) Ball Mouse (With no wheel), PS/2= All issues fixed, and passed.
When I said failed I do not mean they didn't work, I mean they sometimes didn't work and also caused the Video off problem after restarting the computer.
Obviously it isn't the ports (PS/2 or USB) that are the problem, it is more like the mouse itself, and the amount of buttons in particular. As you can see above the only mouse that works correctly is the one that only has 2 buttons, the rest has 3 or more buttons along with a Wheel. The MX700 has 8 buttons + wheel, WOW!
Anyways I figure out it was the mouse, and not the memory.
Obviously MSI needs to make a patch for this mouse problem.
I'm still having a hard time believing that the mouse caused the video not to work, but it is true! I spend well over 5 hours testing this crap. Every time with the mice with more then 3 buttons it messed up, and every time with the 2 button old fashion mouse it worked flawlessly!
MSI, get to work on a new BIOS to fix this mess!!! :]
BioHaz

Quote
Originally posted by Raven_
hi
its possible to use an ps/2 mouse AND a usb mouse at the same time.
i used the ps/2 mouse in windows and the usb mouse when playing games.
you can get some trouble if you do it the way i did it.
i was in windows surfing and the pointer just jumped all over the screen.
when i looked on the other side under a table a friends little kid played with the usn mouse. )
bye
LOL, that isn't what I'm talking about.
There seems to be a problem with my motherboard accepting mice with more then 2 buttons. It works the first time, but if you restart the computer, the video goes off. If you have both installed, it still messed up.
BioHaz

IPod Video Known Problems?

Hi all,
I've had a series of issues with my iPod Photo that have caused me to return it in favour of an iPod video. However, I am a little disenchanted with iPod and want to be fully informed before swapping products.
What are COMMON PROBLEMS with the iPod video, and what should I be aware of?
Also, what kind of videos does it play?
Windows XP

Thanks! I know that by posting here, the replies will be biased, but that's okay. I really do want to hear the horror stories, because I've had one with my current iPod.
Some 60GB iPods with video have video playback
problems. This should be resolved by a software
update in the future.
Could you elaborate on this? It sort of raises red flags in my mind.
I saw the stats on the video playback but appreciate that you have posted them, although perhaps I should have been more clear in my question.
What about ripped/downloaded videos? (Or does it not matter, so long as they are in the correct format?)
- B
Windows XP

Video Sync Problems in iTunes 11.1/ios 7

I have recently upgraded to ios 7 for my iPad and iPhone, and iTunes 11.1. I added two new videos to iTunes (.m4v format) and now when I try to sync with my iPad it seems to hang forever on "Waiting for changes to be applied" and then gives me an error message that the videos are not of a format that can be played on the iPad. This is odd since I already have .m4v videos on my iPad that play just fine. Moreover, I deselected some videos and they do not delete from my iPad as well. Is anyone else encountering this? I have seen some posting regarding music files and playlists not syncing, but nothing about movie files.

I've had video syncing problems (not with music though) when I updated my iPhone 4s to the new IOS 7, but I finally figured it out. What I did was I plugged my 4s in to my computer (Windows 7, 64-bit), then opened iTune (11.1.3.8), clicked on my iPhone tab on the upper right, under "Summary" put a 'check' in the Manually sync music & videos.
Looking at the picture above, notice the: Movies, Music Videos, and Home Videos; are now available. Before this method, these three wasn't there. These are all in the original Videos app for the iPhone. I hope this help you guys too.

Video transfer problem from pc to ipad A1219

video transfer problem from pc to ipad A1219

ArinC
You have posted your issue in Using Apple Support Communities whose topic is 'How to use this forum software's interface, features and/or how to find what you wish'. It is a relatively low traffic and inappropriate forum for your problem. I will ask our Hosts to move it to " Using iPad " where it may get a more rapid response from your fellow users.
best luck
ÇÇÇ

IChat AV video conferencing problems since update

I've noticed that may of us have posted problems we have been having with video chatting (error -8). Nobody has really brought this up but haven't you all noticed that we all started having this problem with iChat since we downloaded Tiger 10.4.10? Or maybe the recent security update of earlier this week.
My question is, if the updates did create the problems, how likely is it that Apple will realize this glitch and patch it up?

I wish I could say this problem only involves Intel Macs or OS X 10.4.10, but I think some of the problems I'm seeing may occur on PowerPC Macs with whatever version of the OS, or Intel Macs running 10.4.9 too.
If an Apple update is the culprit, or even partially responsible, it may be an update that came shortly before, or independently of, 10.4.10 and applies to all Macs regardless of CPU.
Really want to find a solution. Anyone know what the dreaded 'Chat ended with error -22' is really about? Is it bandwidth or blocked ports? Both? Neither?
One case where it was indeed an Intel Mac running 10.4.10, the user gave me the log (I'm a network admin.)
LONG!!!
Date/Time: 2007-06-25 12:01:40.857 -0700
OS Version: 10.4.10 (Build 8R2218)
Report Version: 4
iChat Connection Log:
AVChat started with ID 2345649240.
0x15cf4f00: State change from AVChatNoState to AVChatStateWaiting.
film20202: State change from AVChatNoState to AVChatStateInvited.
0x15cf4f00: State change from AVChatStateWaiting to AVChatStateConnecting.
film20202: State change from AVChatStateInvited to AVChatStateConnecting.
0x15cf4f00: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -22
film20202: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -22
Video Conference Error Report:
@SIP/Transport.c:121 type=4 (00000000/0)
[OPTIONS sip:m.0 SIP/2.0
From: sip:192.168.2.2:5061;tag=1241026963
To: sip:m.0
Call-Id: 11827946916754-ping-192.168.2.2
Cseq: 16570 OPTIONS
User-Agent: COOL/4.6.8.5225 SIPxua/2.9.2.1008 (WinNT)
Contact: sip:192.168.2.2:5061
Via: SIP/2.0/UDP 192.168.2.2:5061;rport
Content-Length: 0
@SIP/Transport.c:121 type=4 (00000000/0)
[NOTIFY sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP m.2:12030;branch=z9hG4bK665e117b3c04d95c
Max-Forwards: 70
To: "film20202" <sip:[email protected]>;tag=1664437433
From: "u0" <sip:[email protected]>;tag=582698565
Call-ID: 1c0c82e2-234e-11dc-9955-df3f510a13c4@192-168-2-116
CSeq: 3 NOTIFY
Contact: <sip:[email protected]:12030>;isfocus
Event: conference
Subscription-State: terminated;reason=noresource
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:121 type=4 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP m.0;branch=z9hG4bK07a5a4c25d70f416
To: "u0" <sip:[email protected]>;tag=582698565
From: "film20202" <sip:[email protected]>;tag=1664437433
Call-ID: 1c0c82e2-234e-11dc-9955-df3f510a13c4@192-168-2-116
CSeq: 2 BYE
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:121 type=4 (00000000/0)
[NOTIFY sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP m.2:12030;branch=z9hG4bK1a8188f243b61051
Max-Forwards: 70
To: "film20202" <sip:[email protected]>;tag=1664437433
From: "u0" <sip:[email protected]>;tag=582698565
Call-ID: 1c0c82e2-234e-11dc-9955-df3f510a13c4@192-168-2-116
CSeq: 2 NOTIFY
Contact: <sip:[email protected]:12030>;isfocus
Event: conference
Subscription-State: active;expires=3600
User-Agent: Viceroy 1.2
Content-Type: application/conference-info+xml
Content-Length: 199
[<c-i v="0" st="f" en="sip:[email protected]">
c<h>i</h><m t="a"/><m t="v"/>
c<h>o</h><m t="a"/><m t="v"/>
</c-i>
@SIP/Transport.c:121 type=4 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP m.0;branch=z9hG4bK5e00cc4917db1e81
To: "u0" <sip:[email protected]>;tag=582698565
From: "film20202" <sip:[email protected]>;tag=1664437433
Call-ID: 1c0c82e2-234e-11dc-9955-df3f510a13c4@192-168-2-116
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]:12030>;isfocus
Expires: 3600
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:121 type=4 (00000000/0)
[ACK sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP m.2:12030;branch=z9hG4bK20acbda544dd5992
Max-Forwards: 70
To: "film20202" <sip:[email protected]>;tag=1664437433
From: "u0" <sip:[email protected]>;tag=582698565
Call-ID: 1c0c82e2-234e-11dc-9955-df3f510a13c4@192-168-2-116
CSeq: 1 ACK
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:121 type=4 (00000000/0)
[INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP m.2:12030;branch=z9hG4bK5b54ffe477e75480
Max-Forwards: 70
To: "film20202" <sip:[email protected]>
From: "u0" <sip:[email protected]>;tag=582698565
Call-ID: 1c0c82e2-234e-11dc-9955-df3f510a13c4@192-168-2-116
CSeq: 1 INVITE
Contact: <sip:[email protected]:12030>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 540
[v=0
o=thomasgaebel 0 0 IN IP4 m.2
s=u0
c=IN IP4 m.2
b=AS:2147483647
t=0 0
a=hwi:70:1:1249
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 12033 RTP/AVP 12 3 0
a=rtcp:12034
a=rtpmap:3 GSM/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpID:657976981
m=video 12031 RTP/AVP 126 34
a=rtcp:12032
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 15:352:288
a=framerate:20
a=RTCP:AUDIO 12034 VIDEO 12032
a=pogo
a=fmtp:126 imagesize 0 rules 20:160:120:160:120
a=rtpID:1751016345
Video Conference Support Report:
@SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 192.168.2.2:5061;received=76.173.0.71
To: <sip:m.0>;tag=501410465
From: <sip:192.168.2.2:5061>;tag=1241026963
Call-ID: 11827946916754-ping-192.168.2.2
CSeq: 16570 OPTIONS
Contact: <sip:[email protected]>;isfocus
Allow: INVITE, ACK, OPTIONS, BYE, CANCEL, MESSAGE, REFER, SUBSCRIBE, NOTIFY, INFO
Allow-Events: conference, refer
Accept: application/sdp, message/sipfrag, application/conference-info+xml
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP m.2:12030;branch=z9hG4bK665e117b3c04d95c
To: "film20202" <sip:[email protected]>;tag=1664437433
From: "u0" <sip:[email protected]>;tag=582698565
Call-ID: 1c0c82e2-234e-11dc-9955-df3f510a13c4@192-168-2-116
CSeq: 3 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:1218 type=1 (00000000/0)
[BYE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP m.0;branch=z9hG4bK07a5a4c25d70f416
Max-Forwards: 70
To: "u0" <sip:[email protected]>;tag=582698565
From: "film20202" <sip:[email protected]>;tag=1664437433
Call-ID: 1c0c82e2-234e-11dc-9955-df3f510a13c4@192-168-2-116
CSeq: 2 BYE
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP m.2:12030;branch=z9hG4bK1a8188f243b61051
To: "film20202" <sip:[email protected]>;tag=1664437433
From: "u0" <sip:[email protected]>;tag=582698565
Call-ID: 1c0c82e2-234e-11dc-9955-df3f510a13c4@192-168-2-116
CSeq: 2 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:1218 type=1 (00000000/0)
[SUBSCRIBE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP m.0;branch=z9hG4bK5e00cc4917db1e81
Max-Forwards: 70
To: "u0" <sip:[email protected]>;tag=582698565
From: "film20202" <sip:[email protected]>;tag=1664437433
Call-ID: 1c0c82e2-234e-11dc-9955-df3f510a13c4@192-168-2-116
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]>
Event: conference
Expires: 3600
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP m.2:12030;branch=z9hG4bK5b54ffe477e75480
To: "film20202" <sip:[email protected]>;tag=1664437433
From: "u0" <sip:[email protected]>;tag=582698565
Call-ID: 1c0c82e2-234e-11dc-9955-df3f510a13c4@192-168-2-116
CSeq: 1 INVITE
Contact: <sip:[email protected]>
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 412
v=0
o=RandallMBPro 0 0 IN IP4 m.0
s=u0
c=IN IP4 m.0
b=AS:2147483647
t=0 0
a=hwi:1092:2:2000
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12
a=rtcp:16387
a=rtpID:1083281016
m=video 16384 RTP/AVP 126
a=rtcp:16385
a=rtpmap:126 X-H264
a=RTCP:AUDIO 16387 VIDEO 16385
a=fmtp:126 imagesize 0 rules 20:160:120:160:120
a=framerate:20
a=rtpID:945981792
@:0 type=2 (00000000/0)
[VCVIDEO_INCOMINGATTEMPT]
[3]
@SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 180 Ringing
Via: SIP/2.0/UDP m.2:12030;branch=z9hG4bK5b54ffe477e75480
To: "film20202" <sip:[email protected]>;tag=1664437433
From: "u0" <sip:[email protected]>;tag=582698565
Call-ID: 1c0c82e2-234e-11dc-9955-df3f510a13c4@192-168-2-116
CSeq: 1 INVITE
Contact: <sip:[email protected]>
User-Agent: Viceroy 1.2
Content-Length: 0
@SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 100 Trying
Via: SIP/2.0/UDP m.2:12030;branch=z9hG4bK5b54ffe477e75480
To: "film20202" <sip:[email protected]>
From: "u0" <sip:[email protected]>;tag=582698565
Call-ID: 1c0c82e2-234e-11dc-9955-df3f510a13c4@192-168-2-116
CSeq: 1 INVITE
User-Agent: Viceroy 1.2
Content-Length: 0
Powermac G4 Mac OS X (10.4.7)
Powermac G4 Mac OS X (10.4.7)

Video rendering problems

Photoshop CS6 stops working while rendering a HD Basic video. I am using windows 7 32 bit with photoshop CS6.

4 GBP ram and 300 GBP free spac on the hard drive.
Sent from my Galaxy S®IIICurt Y <[email protected]> wrote:Re: Video rendering problems
created by Curt Y in Photoshop General Discussion - View the full discussion
How much RAM and free hard drive space do you have?
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4553876#4553876
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4553876#4553876. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

MacPro Early 2008 Display/Video Card Problem

*Hello, I have a Dual Quad-Core 2.8Ghz MacPro (Early 2008) with the stock ATI Radeon HD 2600 XT 256MB Video Card. I believe I am having the exact same symptoms listed on the topic "Mac Pro 2008 Video Card Problem".*
*MacPro has been working fine. Until one day, I power it on and the display stays black. There is nothing you can do besides holding down the power button and rebooting the computer. I have tried to do this many times and the display will not come up. I have also tried resetting the VRAM and PRAM settings - still did not work. I have had my MacPro for about one year and a half. It is in very good condition (no damage/no liquid/no overheating). From time to time, you power on the computer and the display works! It is very random. I am scared to turn off the computer or put it to sleep as this can also trigger the problem.*
*I did not get the extended AppleCare (the MacPro itself already cost me about $3400!) I tested the Cinema Display and it is fine, therefore the problem is not coming from the display.*
*I went to the Apple Store and they kept my MacPro for one night. Called me the next day telling me it was going to cost me approximately $800 in order to fix this problem. They claimed that either my Bluetooth module or my Main Logic Board was causing the display not to show. I am out of warranty, and I think it is very expensive. I am doing my research online in order to try and find a cheaper solution. After reading the discussions and checking out some other websites. I have a few questions:*
*If I buy a NEW* ATI Radeon HD 2600 and install it in my MacPro - will it fix my problem?*
*OR - I also heard about the ATI Radeon HD 4870 - Is that graphic card compatible with my MacPro - will that resolve the problem?*
*Do you think I should give it a shot? Are there any other things I can try?*
*I am thinking that I should try to replace the graphic card first and see if that is causing the problem instead of replacing the Main Logic Board right away (which will cost me over $500)*
*Please let me know of any thoughts that come in mind. I really need some support. I am a college student studying Audio Engineering and I use my MacPro everyday on Pro Tools and Logic. This machine is my life.*
*Thank You,*
*Kevin C.*

Glad you solved your problem Gaunja. Here's an update on my own.
When last heard from I had diagnosed the failure of my displays to boot up to graphics card problem in my early 2008 Mac Pro with my stock ATI Radeon HD 2600 by swapping out the same card from my son's Mac Pro and seeing the displays boot up fine. Before heading off to the Apple store for a new card I reinstalled my suspect video card just to see what would happen. The displays booted up fine. Now, two weeks later, again no video display--black screens--no signal from the graphics card. I rebooted the computer several times to no avail and was, again, about to head off to the Apple store for a new card. This time "just to see what would happen" I moved the graphics card to another slot and bingo, the displays are up. What can be determined from my experience to date?
1. The graphics card is flirting with death. Like a patient unwilling to die, through a mysterious force, it rallies to live another day.
2. The slot the card came installed in is unreliable--it's dirty, there's a spec of dust in there, a contact has degraded after two years, or some other slot related fault. Note that, until the card failed for the first time, it had never been removed from it's slot, the computer was treated gently, and it operated in a very clean environment.
If anyone has another theory about what may be happening here please feel free. I fully expect the displays to go dark again at some point as my suspicions are that it's the card itself that is the problem. The two replacement cards I'm considering are the ATI Radeon HD 4870 or the Nividia Geo Force GT120. I've read that both work with the early Mac Pros. Some complain that the ATI card is noisy and expensive. Based of Gaunja's post and others I think the Nividia card will suit my needs, be quieter, and cost less. But, for now, my stock ATI Radeon 2600 lives!
Just one man's experience with the "Mac Pro display, black screen" problem.

890FXA-GD65 No Video/Post

MB: MSI 890FXA-GD65
Video: XFX HD-685X-ZNFR Radeon HD 6850
Memory: 2x Generic 4 GB DDR3 1333
Power: Diablotek UL Series PSUL775 775W
CPU: AMD Phenom II X4 955 Black Edition Deneb 3.2GHz Socket AM3 125W Quad-Core Processor
HD: Western Digital WD Black WD1002FAEX 1TB 7200 RPM SATA
BluRay: SAMSUNG Black Blu-ray Combo SATA Model SH-B123L
CPU Fan: Sunbeam Twister 120 CW-TWI-120-SV 120mm x 2 MFDB CPU Cooler
Setup: I RMAd my last board due to flakey USB/WiFi. All other components worked well. I got a different board which looks used. The first blue PCI-E clip was half-broken off out of the box. 24 pin ATX, 6 pin PCI-E power and 8 pin CPU power all plugged in. All fans turn on including graphics card, 3 case fans and both CPU fans. HDD spins up. BluRay eject works. All 8 blue LEDs turn on.
Problem: No video posts to my big screen.
Troubleshooting: I have pulled it out setting the MB on bare cardboard, re-seated the CPU a couple times, switched the memory around both sticks to all 4 slots, tried a different video card, unplugged all USB peripherals and SATA drives and reset the BIOS. Same cable/monitor works fine with my laptop, both HDMI and DVI.
Any steps I might be missing? Wife is fed up with having no media PC and I doubt she will be willing to wait another month to get the board RMAed a second time.

Quote
Problem: No video posts to my big screen.
what display is this?
how the VGA is connected to it?
do you select proper input source?

'Source play' and 'audio-video sync' problems with PE8 on fast WIN7 64 bit computer

I am transferring Hi8 videos, about 2 hours long, to my WIN7 64 bit computer with PE8. [Dell Mobile Precision M4400 Computer Workstation (Intel Core 2 Duo T9900 500GB/4GB); NVIDIA Quadro FX 770M, 512MB] I seem to have several problems:
First, after importing the file (.avi), I get a message about ‘dropped frames.’
Secondly, when I try to play the video in the source monitor, the audio plays but the video doesn’t; it only shows the first frame [this is after waiting until the video is ?recognized? ] I can use the shift-arrow key and see that the video is there.
Thirdly, I can play the .avi file in other players, e.g., avidemux or PE pro CS5 on another computer. There, I see that the audio and video are not in sync; the audio can be up to 300 ms ahead of the video (as determined using avidemux).
Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

"I think you're telling me you're using a backwards compatible Digital8 camcorder to capture your video as DV-AVIs. Is that right?" YES
"Are you using Premiere Elements to do this capturing?" YES, AS ABOVE PE8
"Go to the File menu and select Properties. It should show a standard DV codec being used for your video and audio."
WMP v12 is dumb. Under properties, media, it says 'video.' However, avidemux gave me the information state above: video -- Codec 4CC: dvsd, frame rate: 29.971 fps; audio -- codec: PCM, channels: Stereo, frequency: 48 kHz.
So, back to the Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

MacBook Pro 15" video card problems (i think)

Can anyone tell me if this is indeed a video card problem?
MBP 15" info (Dec. 2011)
Processor 2.4 GHz Intel Core i7
Memory 4GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
OS X Lion 10.7.5
This is what happened:
I use my mbp heavily because I edit a lot of videos with Premiere. I also use lightroom / photoshop alot + games. I also installed Parallels desktop late 2013. I don't know if that is relevant but anyway. Everything started late 2013 (a little after installing parallels actually) when there are moments when the audio wouldn't work and I couldn't adjust the volume. It would come back anyway so i didn't mind it. Then the fans were on high speed for little activity. After that the keyboard backlight couldn't be adjusted and wouldnt work. I ignored all of these cuz i wasn't troubling me at the time. In January i left for france to study - I use bike all the time and once stupidly placed my laptop on the basket going to school (rough roads). I had a class with html so I had to open Parallels, my teacher pointed out the fans and how loud they were. That day, parallels desktop said i must upgrade to windows 9 or it will restart every 2hours. I didn't of course. I didn't have time to.
After that (a few days later i think) my laptop would randomly turn into a black screen but it's still on (the power LED is on) I tried turning it off by pressing down the power button and then turning it back on. It worked the first time. During the first week, the frequency of it happening grew. It would do it almost 3 times a day. during that same week I tried to do an SMC reset. It fixed the keyboard light, fans and audio but not the black screen thing. It just keeps on happening around 1-3 times a day. It only happens when I'm using it btw, never when I just leave it. ALSO, after a few days, it would take longer hours to open my mbp again. I mean, the screen would turn black. i would turn it off, then on again. I will ONLY hear the hard drive moving but no startup sound and no grey screen and apple logo. nothing.
The following weeks after that, I asked a friend to help me out. He suggested that I install gfxCardStatus because he said it might be my video card. He instructed that I keep it on intergrated only. So I installed that and did what he said I thought it worked for a while because the black screens stopped happening (even when gfx keeps on going back to dynamic) BUT NOW, MY LAPTOP WOULD FREEZE (not turn black). I'd shut it down using the power button but it still takes me hours to open it again. Sometimes, I'd wait for the battery to drain because it would startup when i charge it (sometimes)
I tried doing AHT as well to confirm the video card problem, but the results are no problems found. I really don't want to replace my logicboard here in france. everything is more expensive here. ;__;
Today I uninstalled parallels to see if that might have had anything to do with my problem now but i think that's just wishful thinking.
Can somebody tell me if this is really about the video card? Thank you

Your appointment at the genius Bar in an Apple Store (anywhere in the world) for an evaluation is FREE, in warranty or out. Those guys put their hands on these Macs all day every day, and they are especially good at Physical and Power problems.
Ask them.

Video signaling problem caused by 1.9, 2.0 BIOS (pointing out a BIOS problem)

Hi, i have a problem with the video signal. At random times when i boot up my computer, the computer would power up but there is no signal to the monitor. there is no hdd activity (via the hdd led) and nothing seems to be happening just that the fans are whirring. i have to unplug the computer then plug it again then turn it up again which sometimes repeats the problem. This is very irritating! So i did a little bit of troubleshooting:
1. I changed video cards. I used a SAPPHIRE ati radeon 9600XT fireblade and a LEADTEK GF4 ti4200. Both cards were causing the same problem and when i used both cards to another computer, there is no problem. = NOT A video card problem
2. used differnt kinds of drivers Cat 3.10, 4.10, 4.20 (omega and official) does not seem to do anything (which also i believe the drivers are OS dependent and its the bios of the vid card that starts up the vid card)
3. upgraded from 1.9 to 2.0 BIOS. still the same problem
4. reverted from 2.0 to 1.7 BIOS. the problem ended.
BTW, the board is 865PE-Neo2 - S. on a Intel 2.6Ghz C, 512MB TwinMos ram with m-tec chips, 80gb hdd, enermax 300w psu
so ive' solved the problem, and i just wanted to point out that there is a problem with 1.9, 2.0 BIOS. (havnt tried the 1.8 tho)

Wish I had seen this thread 2 weeks ago, but you did save me from buying a new graphics card. That was the last step (before chucking this mobo completely) in my attempts to fix the same problem. It didn't bother me too much, except I also couldn't get any DVD player (tried 3) to work. Would boot sometimes and at others gave a blue screen video error.
Flashing to bios 1.7 was the only thing that fixed it. Tried different memory, updating software, various combinations of drives, etc. For the record I tried bios 1.8, 1.9, 2.0, and 2.1. Not sure what about those updates causes problems but there definitely is something wrong.
Thanks.

The Video Out Problem...Fixed?

I know Wikipedia can be edited by virtually anyone with membership and an opinion, but I had to know.
It said that an itunes update 1.0.2 fixed the video out problem...does that mean that videos can now be connected to a TV and play on the TV? They fixed that?
I am still ever in the market for the nano, just waiting until the right ammount of money to purchase one. Thanks

I think it is currently working according to this knowledgebase article: http://docs.info.apple.com/article.html?artnum=300233
That is, for the new Nano, you can use the older iPod Universal Dock (ie the normal one that has been available for a couple of years) together with an iPod composite video cable or an SVideo cable (ie all currently-available stuff you may have already bought for a previous-series video iPod), OR you can use the brand new "Apple Universal Dock" with the brand new Apple Composite AV Cable or with the (new) Apple Component AV Cable, OR you can use one of those brand new Apple AV Cables directly with the Nano (without the new Apple Universal Dock).
What you cannot do is connect an old video cable or accessory, which was expecting to get composite video from the RCA/audio jack on the Nano, because it looks like (on the new Nano and the Classic) the audio out jack is now just for audio out and video is only available via the dock connector on the iPod.
ted.h.

Video Posting Problems

Similar Messages

Maybe you are looking for