Video purchases won't play on ipad

I've purchased approximately 10 shows on my Ipad and experiences an interuption in the download. When I tried to continue the download the system told me that the content in unavailable. This is frustrating since I paid for the videos for my kids for a roadtrip. Is there a way to recover these downloads. The help on the apple site brought me the to same unavailble message.
Thanks

Hi there,
You may find the two articles below helpful.
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
-Griff W.

Similar Messages

Why is the music on my iPod randomly not letting me play? all my good ones are the ones I purchased won't play, my storage is fine. I tap on the song but it skips to a completly different song on iPod but not laptop

Why is the music on my iPod randomly not letting me play? all my good ones are the ones I purchased won't play, my storage is fine. I tap on the song but it skips to a completly different song on iPod but not laptop. For example both versions of Til' I Collapse by Eminem won't play on my iPod but on laptop, same with Born this Way by Lady Gaga

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate.

My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate. When I "Preview In Browser" through Edge it plays (I have created a shape and used the "play video full screen" snippet) in full screen mode just fine. When I "Preview Site In Browser" through Muse and click on the shape to PLAY VIDEO FULL SCREEN, it does nothing. I am new to both programs and can't figure out why it will work out of the preview window in Edge and won't work when I publish to Muse. Does anybody have an answer or a work-around for me?

Hi Watch this video,
If this is what you need, you can get it here [[zazaalaza's]].mulib - Google Drive

My tv shows that I have purchased won't play. It says loading, then says authorizing then it says A error has occured loading this content. I just bought apple tv brand new. Any suggestions?

My tv shows or movies that I have purchased won't play at all. It says loading, then it comes up and says authorizing. Then it says "An error has occured loading this content." I just bought this apple tv and gone over and over pluging it in and setting it up thinking I did something wrong but I don't think it's that. Like I said I can see all my shows and movies but just can't get anything to play. Please help me. Any suggests?

This is happeningto you as well?

Video Podcasts Won't Play under 7.3.2.6

Just installed new itunes and quick time and numerous previously downloaded and newly downloaded video podcasts won't play. You can see the opening frame on the small screen at bottom left if you click but when you try to play, the screen goes green, purple or other color and starts to vertically roll (like old tvs used to do) with foggy images. Strangely other video podcasts (old and new)do play. One example of podcast that does not play is Photoshop Killer Tips; one that does play is Adobe Photoshop Quick Tips.
Computer has plenty of space and has been cleaned of temporary files, defragged, etc.

And this is when going to videos-->video podcasts, right? Do they even show up there at all?
btabz

Video clips won't play back after capture

I am a long-time user of Premiere Elements, currently using version 9.0. I am capturing video clips from the same videocamera that I've used in previous versions of PE. My video clips won't play back after I capture them. The clip is in my "media" area, but when I try to play it back, the audio plays but the picture remains frozen on the starting image. What is happening?

It is a Sony Handycam DCR-HC28, mini DV, using a firewire connection.
Operating System is Windows XP Pro, Service Pack 3, system specs are SATA 2 RAID 1 with dual 1 TB hard drives. 4 GB RAM. As far as how fast my processor is, I looked on my invoice and it says, "Intel Core2 processor Q6600 (2.4 Ghz, 1066 FSB) with Quad Core technology and 8 MB cache, 4 GB DDR2 SDRAM at 800 MHz.
I defragmented my hard drive before beginning and have 779 GB or 83 percent free space on hard drive.
I have not placed my video clips on the timeline yet so don't know if there is a red line on top, indicating it hasn't been rendered. I merely wanted to play back my clip to set "in" and "out" points. This has never happened before in my long history of using Premiere Elements. Would prefer not to have to go back to PE 8, as that was a disaster.

Help! Video's won't play. It says playing on AirPlay on 'null'. What should I do?

Help! Video's won't play. It says playing on AirPlay on 'null'. What should I do?

Hi I upgraded my iPhone on iOS 6.1 now it keeps on turning off and on. What would I do?

Video from iPhone won't play on iPad

I received a video from iPhone in an email but iPad won't play it? Any way to get it to play on iPad.

I appreciate what you are both saying -- but it is not the music that is the problem. The video itself is NOT blocked - you can view it on a computer -- but when you try to view it on ipad/iphone the message says, "not available on this platform". Here is a link to a video I did in Elements 9 on Tuesday:
http://youtu.be/06TaM22SkdE
Here is the link to the video done last night in 11:
http://youtu.be/h353KBGkodU
The "raw files" are both adobe flash.flv -- it's just not making sense...
Thank you!!!

YouTube Videos and others won't play on iPad mini after upgrade to iOS 7.0.2, any suggestions?

I upgraded my iPad mini to the iOS 7.0.2 software and now videos (YouTube, USA Today, etc) won't play. I have already done a restart (holding down the menu button and on button) and eern after restart, videos won't play. Any suggestions?

when u do a restore it deletes off everything on the device, including software. then it reinstalls the software from a new download package. this will ensure ur device isnt getting the same glitch in its system that ur current software has if that is the issue. when u restore from the backup u made AFTER uve done the 'restore ipad' that will put all of ur stuff back onto the ipad. i would suggest deleting off the youtube app b4 doing the back up and then readding it after the restore and restore from back up phases. if all of that doesnt work, youtube is the one with the problem and u should contact them.

Mp4 from After Effects won't play on iPad Air

I have a series of mp4 vids - some are exported from Premiere, others, After Effects - CS6 Win7 x64.
They all play in iTunes, but the vids from AE won't play on the iPad. Even when I sync them the iPad identifies them as unplayable.
Any ideas what could cause this?
Thanks.

There's a million different things that could be wrong with your MP4 settings. You'll need to post all the compression parameters for anyone to assess the problem properly.
The easiest solution, and one which will give you better quality video anyway, is to use Adobe Media Encoder to do your compressions, rather than After Effects. It has iPad presets built right in, too.

Converting MP4 video to download and play on ipad Air

I have a few MP4 videos that I want to download to my ipad Air and show as my video portfolio.
I have researched this and there are so many answers but none seem to work. (tried like 4 of them already and still choppy video!)
I can't seem to find the right format to convert the videos so they work!
My import settings on itunes are : AAC Encoder: iTunesPlus (128kbps (mono)/256kbps (stereo), 44.100 Khz VBR optimized for MMX/SSE2)
I have VLC to convert the videos to m4v format but when I load them into itunes and then into my ipad, they show but the playback is choppy and no audio.
If anyone out there can give me the right formula to use in my VLC converter I would appreciate it:
Encapsulation- MP4/MOV
Video-
Codec: H.264
Bitrate: ?
Frame Rate: ?
Resolution: Width: 1280 or 720?
Height: ?
Audio-
Codec: MPEG 4 Audio (AAC)? or MPEG Audio?
Bitrate: 128?
Channels: 2?
Samplerate: 44100 or 48000?

I am having the same issue using VLC 2.1.3 - video conversion from mpg to mp4 won't play in Quicktime and are choppy when played back on my iPad Air. I don't use iTunes to upload but access them directly with FileBrowser App.

HT1420 I song I have purchased won't play on the computer which it is authorized for.

I have purchased a song from the iTunes store but it won't allow me to play it. It says I need to authroize my computer and when I do that it says it is already authorized but still won't play the song I downloaded. What can I do?

Welcome to the Apple Community.
Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app) on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

Video/Movie won't play when exported as a PDF.

Hello,
I am creating an interactive PDF using CS5 to display video work. Unfortunately, the video won't play when exported as an interactive PDF, I am just left with blank space. I find this very odd as it plays in preview and also when exported as a SWF but that file type is unsuitable for the project.
Initially when I exported it I got this message: "One or more of the interactive elements are clipped in ways the pdf files can't reproduce...." Obviously, I have ensured the file is resized correctly and also tried .mov, .mp4 and also .flv file types with no success. I have also checked the simple things like ensuring all the right boxes are ticked when I export.
This is not the first time I have embedded video but it is the first time without success despite following the same pattern. Any ideas as to why this would be and how to fix it?
Thank you,
Laura

Use Flv or f4v format, after you have placed video into your layout, make sure that you don´t scale or crop video frame at all.
(Whren you File > Place a video, you will have a loaded cursor with video icon. Click the empty spot on page with loaded cursor, don´t draw a rectangle or click on the top of some exisiting frame)
It´s important that you have your video in 100% encoded size in your layout. If you need to scale or crop it, load that video into Adobe Media Encoder and do it there, and re-encode the video to the correct size and shape aftrwards.
Adobe Media Encoder ships with InDesign.

Video podcasts won't play, cause ipod to freeze

Hi there,
My 5.5g ipod won't play video podcasts. I've downloaded several different ones, made sure the "TV Out" is turned off, and played with several other settings, all to no avail. When I open one from the video>video podcasts menu, the screen goes black, sometimes it says "Loading" with the little "play" arrow in the top left corner, and that's all I get. It freezes, and I have to reset.
I've also tried restoring the ipod to factory conditions, which didn't work. The podcasts play in iTunes, so that's not the problem.
This thread
http://discussions.apple.com/thread.jspa?messageID=8969818&#8969818
also seems to describe my problem, but I can't find a solution there.
Anybody have any ideas for how to fix this? Thanks!

It's up to the producers of the podcast whether they make their video podcasts iPod compatible or not. It's certainly not a requirement for an iTunes Podcast feed which is, perhaps, unfortunate. You could try sending the producer feedback but even if they take any notice it won't affect podcasts you've already downloaded. The *Make iPod compatible version* rarely works (somthing to do with whether audio & video are separate or multiplexed to start with). I suggest you download SUPER which is capable of converting almost anything to an iPod version. You have to navigate through a bunch of links before you get to the actual download, but it is there - just ignore the links to other commercial software on the way, SUPER is free.
tt2
PS. On my current setup SUPER generates the odd error message while running but still produces a working output file...
Message was edited by: turingtest2

Help!! video clips won't play in slide show

I have a 40 minute Aperture slide show presentation that contains a few video clips (time-lapse videos, etc). It played well last summer. However, now that I am about to present the show tomorrow I can't get the video clips in the show to play. They have all been located and connected to the original files. If I double click on individual video clips they will play in the browser window but they won't play in my slide show. Any ideas? I'm in panic mode!
Aperture 3.4.5.

What happened since last yoear? Have you reinstalled the system at some point? Maybe you had last year additional video codecs installed? Flip4Mac, Perian?
Do your videos play in QuickTime Player, when your export them to the DeskTop?
Are your videos iPhone videos? In that case you may have a problem with
Also, if you recently run a cleaner utility that cleared the caches, you now may have a missing com.apple.xpchelper.cache in /System/Library/Caches .
This has been known to cause videos from stopping to play. This file will only be recreated by reinstalling MacOS X, but you can force its recreation by a Terminal command. See:
Re: Library doesn't play MOV-files on one computer, no problems on another.
Regards
Léonie

Video purchases won't play on ipad

Similar Messages

Maybe you are looking for