Video Quality-Compilation Video

I have a number of vacation videos that I created and burned to DVD. I've since ripped those DVDs for use with Apple TV. I'd like to now grab portions of each video and create and new "compilation" video. Will there be any noticeable decrease in video quality if I grab scenes from these rips and create a new iMovie project?

DVD's are "standard" definition MPEG-2 formats so it would depend on the sttings you used when you "ripped" them.
You'll need to make a 640X480 project.

Similar Messages

Apple tv video quality vs hd tv and high def dvd's

ok...i know it supports 1080i, but does the video quality of video in itunes really look good compared against say a blu-ray disc, or hdtv signals? i'm sure it will get better (with a hardware or software upgrade?) if its not close to high def quality but want to know what i'm in store for if i buy appletv now...thanks. PS: i currently have directv HD and a ps3 for blu-ray, and my tv's are all HD...

Based on my own testing, the distinctions between an HD-DVD movie (which are true 1080) and an Apple TV video converted as its own maximum settings (which is 720) is actually quite noticeable if you have a 1080 TV set, but at the same I don't consider it a show-stopper. I watch a lot of HD broadcast content that's only 720p, and it's still very good.
An HD-DVD or Blu-Ray DVD will normally be in 1920 x 1080 resolution (1080p or 1080i, generally depending on your equipment). The Apple TV's maximum resolution is 1280 x 720 (basically 720p). Therefore, even an original HD-DVD or Blu-Ray DVD converted to Apple TV will need to be scaled down to 720p for display on the Apple TV.
Further, Elgato EyeTV actually scales these down somewhat lower, so HDTV recorded content could be even worse-off, depending on the original source. The standard Apple TV export settings use a 960 x 540 frame in order to keep the bit-rate and frame rate within tolerances (since a 720p signal is approximately 60fps, and the bitrates will generally exceed 5-6 mbps, which pushes the limits of the Apple TV).
Even more interestingly, Elgato's new turbo.264 dongle will only encode in "Apple TV" format at a maximum resolution of 800 x 600 (and if you do the math you will realize that this will be considerably less for a 16:9 aspect ratio video).
The result is that videos converted from an EyeTV Hybrid are technically much worse off on the Apple TV than viewing the original source material. Whether this is significant enough to be noticeable will depend on your output medium, but on my 62" DLP, the difference is quite apparent (although still far superior to an SDTV signal).
You can get 1280 x 720 content to play back at 60fps at 5mbps bit-rates on the Apple TV by using ffmpeg-based encoders and manually selecting higher settings, although it's been hit-and-miss in my own testing, and of course it creates gargantuan files. Elgato and others have obviously tried to stay with the more conservative settings to ensure that they can guarantee the broadcast possible range of support.
In fact, although most of the standard encoder settings max out at 2.5-3.0 mbps, I've successfully pushed up to 6 mbps through the Apple TV, although such content has to be synced rather than streamed, since even an 802.11n network has a hard time keeping up (it worked, but there were some drop-outs and glitches in the process). Of course, 6mbps content is going to fill up the Apple TV hard drive pretty quickly as well (you'd only be able to fit around 11 hours on the internal 40GB hard drive).
The other thing to keep in mind with DVD movies is that they come from film, which is a 24fps source (based on the physical nature of film). As a result, the distinctions between a 720p and 1080i signal are less prevalant when dealing with film content, since you won't get the full 60fps HDTV capabilities anyway. Interlacing can still create some nasty side-effects, but it's far less of an issue when you're dealing with less than half of the normal frames.
In my own experiences, I have an Apple TV that is connected to a 1080p upscaling DLP TV (native 1080i input, internalized de-interlacing), and a second Apple TV that is connected to a 720p LCD TV. With the first Apple TV, I can notice the difference between 720p and 1080i output settings only when viewing photos, since the remainder of the standard content doesn't exceed 720p anyway. Further, because my TV de-interlaces a 1080i signal to 1080p, I don't get the flicker that is normally associated with a 1080i signal.
On the second Apple TV, I leave the setting to 720p, since that's the native resolution of the second TV, and I get noticeable interlacing-based flickering on the 1080i, particularly with photo slideshows (mostly in the transitions).

Upgrade Video Quality of Pervious Purchases

How do I upgrade the video quality of video purchases that I have already made? , now that all videos are being distributed at a higher quality (640x480)?

There's no upgrade. You'd have to buy them again.

IChat Video Quality vs. Bandwidth FAQ?

I have done some searching and have come across some video quality threads.
Most of my Video Conferencing is done between my Macbook or iMac 24 across Time Warner cable to another iMac 20. All running OSX 10.4.9.
It appears that the video quality will vary based on the upstream bandwidth availability. In my case I have 600-700kbps pretty consistently. This is pretty decent for a 1 person video conference. Not quite up to the standard I was hoping for but usable.
What is not even usable is doing a multi-person Video conference. In this case two local machines on the same wireless network and one machine across Time Warner cable (we use the same provider). When I bring the second local machine, the conference splits out properly but the video in each widow (other than my preview) is so blurry that it is completely useless.
I would be very curious as to the experience of others attempting to connect across the same service providers network. In this case we are connecting across Time Warner between Florida and Ohio. The performance should be rocking with at least 1MB upstream (I will have to check but I think I have 5MB up).
The other thing that I was wondering is if there is some way to tweak the iChat Video settings to force it into a specific video quality mode (and possible deal with some dropouts).
Sorry for the long post but I am hoping we can begin to compile information on bandwidth requirements and perfomance experienced with various service providers.
Thanks!
Jim

Thanks, I did both tweaks and the really improved the 3 way conference.
My speedtest is below and is on Bright House in Tampa. Note that the best that I achieve watching Connection doctor is in the 700 territors. I do tend to be able to deliver 20fps pretty consistently. But my bandwidth bounces around a lot. I am not a big fan of cable for quality and consistency.
[IMG]http://www.speedtest.net/result/145047165.png[/IMG]
Verizon FIOS is moving into my area and I believe they will offer much better speed than Bright House and certainly more consistency. RF is simply a nightmare to maintain.

Comparing video quality of AVCHD BluRay discs using Final Cut Pro Share vs Compressor

Up front, I will admit to being a newbie when it comes to using Final Cut Studio 3 and would appreciate some feedback from the Apple forum experts.
I have spent a lot of time trying to determine how to achieve an optimum group of Compressor 3.5.2 settings so that the playback video quality of an AVCHD BluRay disc is equal to or better than one created by using the simpler auto settings of FCPro Share, version 7.0.2.
When using Compressor’s auto/default maximum settings, I experienced the same error message reported in:
Error MessageDuring Creation of Blu-ray Disc in FCP and Compressor 3.5
https://discussions.apple.com/message/12073794#12073794
I have since made some Compressor AVCHD Discs with smaller bit rate settings and compared video quality with a single FCP Share AVCHD disc. Both seem to be equal in providing a very good video when viewed on my new Panasonic DMP BDT 310 BluRay player. However, the Compressor AVCHD discs show some motion artifacts not present with the FCPro Share version, especially when scrolling text or when objects are moving through the field of view, and visible artifacts are seen from a stationary chain link fence and other lattice work in the background of the video sample.
My sample video used for the comparisons between Compressor and FCP Share discs is a 21 minute duration home movie, originally captured from a mini DV, Canon HV30 1080i camcorder using ProRes HQ encoding(1440x1080), and dragged into FC Pro 7.0.2 timeline where 10 chapter markers have been inserted.
To create an AVCHD disc using FCPro Share, Markers are used to set the IN and OUT points, Select IN to OUT from the timeline, pull down File Menu Share, Select Create BluRay from options in pop out Share pane, and designate output device along with picture files for Background, Logo, and Title options. When these are completed, click on Export. My 21-minute video required almost two hours for encoding including about 10 minutes for burning. This accomplished on an iMac 3.06 GHz Intel Core 2 Duo.
To prepare this same 21-minute video for use with Compressor, I again Select IN to Out from the FCPro timeline, but this time use File Export as a QuickTime Self Contained movie including Chapter markers. Then Open Compressor, choose Create BluRay from Template pane, right click on the down arrow in the Batch window and load the QT self contained movie file. From there I went to the Inspector window and tried various combinations of bit rate settings along with Frame Encoder options such as Better or Best motion parameter controls.
I have tried the following combinations of Bit rate settings along with varying Frame Encoder controls and burned an AVCHD disc for each example:
Example A
Compressor set to 6 Mbps Average and 8Mbps Maximum, Frame Encoder settings OFF. Approximately 4 hours to encode although the time remaining estimator indicated a larger value of ~7 hours; not an accurate estimator at all.
Example B
Compressor set to 6 Mbps Average and 8Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motionadaptive)” settings. Approximately 4 hours to encode, not the 13 hours that were estimated.
Conclusion: Comparing A & B Compressor versions, Disc B showed some improvements in reducing motion artifacts over Disc A.
Example C
Compressor set to 13 Mbps Average and 15 Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motion adaptive)” settings. Multipass checked. DeInterlace was checked. Unknown hours to encode; about 8 hours done overnight..
Conclusion: Disc C showed some minor improvements reducing motion artifacts over Disc B
Example D
Compressor Auto settings,i.e., 15 Mbps Average and 17 Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motion adaptive)” settings. Multipass checked. Approximately 12 hours to encode, done overnight. Inserted disc next morning after the overnight encoding was completed, and a few minutes later an error message pane appeared that the maximum bit rate had been exceeded. This message was consistent with the Apple posted thread referenced above. Unfortunately the long overnight encoding was wasted.
It seemed to me that the best Compressor settings for suppressing the motion artifacts were displayed by the disc burned in Example C, i.e., 13/15 Ave/Max Mbps with“Better” Motion settings in the Frame Encoder.
However, when this disc was compared to the AVCHD Disc burned using the FCPro Share, the latter still seemed much better. I do not know what the auto bit rate values are as set in FC Pro, but for me, the quality is quite good AND the motion artifacts are significantly reduced, especially evident with the scrolling text.
Sorry about this long post, but I thought the detail would be necessary for the experts, and maybe helpful to others trying to get started in this BluRay arena. Did I misuse Compressor? I think the sample video exported as a self contained QT movie was the right thing to do? Not sure where I went wrong.
Thanks in advance for Feedback and Recommendations. For now, I’m going to stay with the simpler process using Final Cut Pro Share function.
BoBo

Thank You, Brad, for responding; glad to hear I'm not the only one having similar Compressor issues.
You may have hit on something. Perhaps Compressor's use of H.264 encoding was the reason for my motion artifacts? And perhaps Final Cut Pro Share retains the 1440x1080 quality as it burns the AVCHD BluRay disc?
I had Toast 10 for less than 30 days a couple of years ago, and was lucky to get a refund.
What version of Toast do you have? Wondering if new Toast 11 has improved previous bugs, especially upgrading its Chapter text, pictures, music. I would go back to Toast if it came close to mirroring DVD Studio Pro, or even iDVD capabilities.
Thanks,
BoBo

2009 Macbook to HDMI: Low quality/blurry video

I have a Macbook Pro from mid-2009, Apple's Mini Display Port to VGA Adapter, and a VGA Adapter to HDMI cable. My computer connects to the HDMI input on my TV just fine, but when I try to show a video that has been downloaded to my computer on the other display, the resolution of the video is good, but the video is not clear- the frames don't change quickly enough, even though it is set at 60 HZ. Will downloading Mountain Lion fix the solution? Or is my computer just too old? I've tried the same cables with my friend's 2011 or 2012 Macbook Air and the video on the display is seamless. Any help would be greatly appreciated.

Hi musketeer23,
If you are have issues with the video quality on an external device connected to your MacBook Pro, you may find the following article useful:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
- Brenden

MacMini - LG 32" (32LB75) Problem - Poor video quality and now no picture.

Hi there, apologies for the length of this post....
I purchased a mac mini 1.8Ghz with 2Gb RAM yesterday with a wireless keyboard and mouse and hooked it up to my 32" LG 32LB75 using VGA. On startup the display looked ok, I managed to click through the various Leopard initialisations. I bought the machine for use as a front room media player for mainly DivX movies and the occasional bit of music.
Once I had installed the DivX codec I opened a DivX file in Quicktime and selected "full screen mode." As soon as the movie started I became quite disappointed. The picture quality was quite pixelated ("noisy") and certainly not as good as when I play the same movie file from my old dell PC on the same LG tv (the dell PC has a 64Mb PCI radeon 7000 which connects to the tv using the same VGA port as the mac).
Anyway just to give the mac a fair go I thought I would try out some genuine quicktime video samples from the itunes store (this time viewed from front row)....again not brilliant.
So I thought I would investigate the screen resolution to see if I could improve things. It appeared the resolution was set to 1900 by 1200ish I say "ish" because I can't remember exactly. I then attempted to reduce the resolution and eventually I settled on one that looked quite clear with the font size big enough to be easily read. Again I tried the movie and there wasn't much (if any improvement). Whilst changing resolutions the screen would go blank for a few seconds but on one particular setting (can't remember exact numbers) the display went blank and never came back. The tv now just displays "no signal".
I despaired and connected the mac to a 17" Iiyama montior that I use with a PC and it worked ok. However each time I tried to "hot swap" back to the television I would end up with no picture.
I'm really disappointed because everything else about the mac I really like. Particularly the remote for frontrow which is precisely what I wanted it for. The problem is I've spent over £500 and now seem to have a lesser quality picture than I had to begin with (ignoring for the moment that I don't have any picture!!)
Anyway my questions are these, answers to any or all most appreciated.
1) what is the easiest way to get my mini to start displaying on my tv again?
2) what would the optimum resolution be? My television mentions 1366 x 768 in the manual
3) If the mini doesn't offer this resolution in the pick list is it advisable to "force it" using some alternative software (ie 3dexpress.de)?
4) Is the video quality affected by the software player? ie would VLC give better picture with DivX over quicktime/itunes/front row?
5) How likely is it that the video resolution of my new mac mini isn't "as good" as my old dell machine with its PCI graphics card?
6) Finally if I don't get results as good as my existing PC setup, how accomodating are apple with refunds? I bought it from a UK high-street apple store. The back of the receipt mentions a "14 day not satisfied" return policy but then goes on to say something about being "unopened"...which seems a little confusing. Ie how do you know if you're satisfied until you've actually used it?

Hi there
the solution was to remove the various display config files in leopard and then restart the machine, this got my display back on the tv (albeit off centre). To fix the "off centre issue" I used the LG "auto correct" feature from the remote control "menu > screen" options.
The apple support site describes how to remove the affected leopard display files here http://support.apple.com/kb/TS2213?viewlocale=en_US As you will see their resolution consists of 2 main steps, the first one involves starting your machine in safe mode, if this doesn't work then you proceed to the second step where you remove the files using a terminal prompt.
I didn't bother with the first step mainly because I don't think I can start my mac in safe mode since my only keyboard is wireless (bluetooth). So I connected the mac mini to a 17" LCD monitor (which thankfully did display the video signal ok) and removed all the listed files using terminal. I then shut the mac down, swapped the VGA cable back to the LCD tv restarted the mac and it detected the tv and set a resolution that worked. I then very carefully reduced the resolution down to one that was recommended by my tv (1300ish.. x 768ish??).
At this point I was back to having an acceptable signal but still a little off centre. So I used the TV remote, pressed menu, went into screen options and chose "auto correct". Picture then filled the screen perfectly.
The problem seems to be, leopard lists a bunch of resolutions that it believes your tv/display can handle but it would appear that in fact some of these resolutions are not supported by your TV and if you choose one of these your signal disappears and you can't get it back.
I would still say that I'm not 100% convinced with the mac mini's onboard graphics (I have a 1.8GHz version). I'm going to download some HD content and see if that improves things, but certainly my existing DivX collection looked a little sharper and clearer and better coloured using my old dell PC with its radeon PCI card. But the difference in picture quality is outweighed by the convenience of its size and the font row interface. I might tinker with putting Windows Media Center on it one day, perhaps that might improve things.

Macbook Pro to VIZIO LCD TV via HDMI Grainy Video Quality?

So when I bought my MacBook Pro back in July 2010, I purchased an assortment of accessories to go with it including a special third-party Mini DisplayPort to HDMI Adapter device off of eBay. The HDMI Adapter device works mostly the way I expected it to. That is, the video and audio signal coming out of the MacBook is channeled into the LCD TV display properly so that I can see the computer video display on the LCD TV and sound is also coming out of the TV too.
Just one minor annoyance: video quality. Actually, the picture is perfectly fine and beautiful, except for some reason I get weird video artifacts that are basically tiny specs that quickly fly across the screen very rapidly and they are all over the video display. Almost like the video signal is partially grainy or fuzzy or something.
I've tried to Google to see if anyone has reported any similar problems, but no luck. I wish I knew exactly what device in this process is the culprit of this behavior; i.e. either the MacBook, the HDMI Adapter, the HDMI Cable, or the LCD TV (Vizio SV470XVT 47" 1080p 120Hz LCD HDTV).
If anyone can help to possibly instruct me how to fix this problem or how to further diagnose the problem, I would greatly appreciate it.

For a 2010+ MBP you can connect with a Displayport to HDMI, which will include Audio.
With older MBP you will need a displayport to HDMI, if you want audio to the actually TV, then you will need to get a cable with either digital out from MBP to the HDMI, or USB audio mixed into the HDMI
eg
http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/

FCP Novice needs help with video quality and FCP 5!!

Hi,
I have a real problme that I cannot seem to fix. I think its because I am doing something really wrong!
I have a Sony HC42E MiniDV Camcorder which by default records video in full widescreen. I recorded several tapes this way and have now begun trying to edit them in FCP 5.04 (Tiger 10.4.6). Whenever I log and capture my clips they appear to be fuzzzy and unclear on the Mac monitor whilst being totally crisp and sharp on the camcorder viewfinder. I tried capturing using the DV PAL 48Khz Anamorphic Preset which keeps everything the right size (the final output needs to be true widescreen and not with black bars added) but the resulting video on screen is blurry and bitty. I then tried capturing using the DV PAL 720 x 576 normal preset and the video is a little clearer on the screen (for both presets I have chosen lower field dominance) but when I play back it plays back in widescreen on the mac canvas window but at 4:3 on the camera's viewfinder.
I then assumed that maybe this is just becuase the mac screen (CRT by the way) doesn't use fields. So I exported the sequence as a QT movie using DV PAL 16:9 and used quicktime (OS9 Classic - my compressor has never worked because of the dreaded "unable to connect to baackground process" problem which I've never managed to correct) to convert it to MPEG2. When I import this as an asset into DVD Studio pro 4 and set the track size to 16:9 it comes through at the right aspect ratio. However it looks blurry on screen. Thinking that this will be fine on a TV I burned the disc - inserted it into my DVD player (a good one!) and watched it on my new 32" widescreen TV (a good one!) and the picture qualitty is poor. Its so much blurrier and bittier than the original footage looks when played through the camcorder's viewfinder!
The final footaage looks like an old VHS recording that's a year or two old!
Does anyone know how I can capture my footage in FCP with the maximum quality, edit it without quality loss and the export it for DVD again without such significant quality loss whilst all the time keeping it at proper 16:9 widescreen?
Is there some presets I should be working to?
I'm tearing my hair out! Help!

Hi Guys,
thanx for your replies.
here's the latest:
Brian, I followed your instructions and the DVD burned successfully. However the video quality of the dvd when viewed on my TV ('ve tried on all 3 of my tvs now) is still a lot poorer than the quicktime movie that was imported into DVDSP4. When I play the original QT Movie on my Mac CRT monitor it looks a little blurry and grainy because I guess its non interlaced however when viewed on an external Video monitor it looks great - very sharp.
When I view the burned DVD on my television the picture quality looks like the non interlaced version of the original QT Movie that appeared on my Mac CRT and not the sharp interlaced (lower field) version that appeared on my external video monitor.
Its almost like taking a sharp jpeg into Photoshop and applying a gaussian blur of about 0.3 followed by jepg compression compressing it down to 5% quality!
I'm totally mystified. Can the conversion to Mpeg2 be removing all interlacing so that you get the less sharp computer monitor look? I just want the video on my final DVDs to be as good as the original source footage! I appreciate that along the way there might be loss of some quality but surely not that much?
Does this make sense to you guys or am I still doing something very wrong?
Robert: I have tried setting all manner of drives including a fresh external firewire HD with nothing on it (clean out of the box) but it doesn't seem to help.
Brian: I tried the no network suggestion a few months back but I'm not sure if I got it right. At the moment I have broadband through an external speedtouch usb modem and am also connected (occasionally although not for the last 3 months) via a crossover cable to my PCs ethernet card. When I last tried the No Network solution I had immense trouble getting my internet to work again! Can you please help me by directing me to the best ay to do this while protecting my internet settings?
any more help guys would be greatfully appreciated.

IPhone 6 Plus video quality is extremely poor when on Facetime and when sharing via text/message

I upgraded to the 6 plus from the 4S. Everyone that I facetime with and send videos to via text/message tells me how incredibly horrible the video quality is....especially in comparison to the way it was before I upgraded from the 4S to the 6Plus. These are people that I have always sent videos to and Facetimed with before, and they all say they can really tell a difference. So frustrating that my three year old iphone 4S is better than the new 6 plus 128gig that I just paid $500 for. We have little ones at home and this is one of the main things we use the phone for....to send vidoes and to Facetime with grandma and grandpa.
I'm on the same carrier (Verizon) that I have always been and have not changed anything. Is there a setting on the phone I can change that will help with this? I love the phone otherwise, but if it can't do this right, I'm going to return it and get my money back.
Can anyone help? Anyone experiencing this???
Thank you.

I have the same issue!! Why isn't there any answers to this problem? I became the laughing stock who owns a $1000 iPhone that can't share videos with family and friends. Please help!!!

How should I best import HD Videos from the new iPad to my mac without loosing video quality?

The new HD video on the new iPad is awesome, but it can eat up a lot of memory in no time. I would like to know what is the most recommended way to export my ipad movies to iLife on my mac without loosing image quality, so i can free up space on my iPad.
If I use iPhoto I notice that the file size of the video from the new iPad is a lot smaller then if I use iMovie to import the same video.
Example: I import a 53 second video from the new iPad to iPhoto and the imported file has a file size of 143 MB in iPhoto. (iphoto save the video as IMG_0048.mov)
I import the same video to iMovie manually and the imported file size is 843 MB in iMovie. BIG DIFFERENCE. (iMovie saves that same video as clip-2012-03-20 16;13;08.mov)
Now to really be confusing: I go to Image Capture program and locate the file manually on my iPad and is has the same name and file size is what is in iPhoto.
So either iMovie is making the File a lot larger when it imports to an event, or the file I'm looking at is actually the iPhoto version that I get because I sync with iPhoto.
The second issue that I have is that now I have 2 videos on my hard drive: one in iPhoto, and one in iMovie for a combined data storage of close to 1 GB.
I would like to be able to import ALL my iPad recording into iPhoto and then delete the video from the device when done.
But if I loose video quality, I'm not happy about that. Secondly, by importing video from my iPad into multiple iLife programs, I'm creating duplicates with sometimes different quality. Any suggestions? is there a setting in iPhoto that can do all this for me?
Robert

Don't use iphoto to deal with movies. it's not really meant for that. use Quicktime or iMovie to work with your videos

Why is playback video quality not as good as the source?

Hi. I'm not new to PrE but am new to the forum.
I've been using PrE 2 for about 7 years. I got a newer computer running Windows 7 and basically was forced to upgrade to PrE 12 because PrE 2 didn't run very well on the newer machine. Once I installed PrE 12, I was eager to jump into my first project on this machine.
I expected that with a newer machine and the latest software, I would get outstanding results--hopefully much better than what I always got with PrE 2 on the old machine. With PrE 2, it was not uncommon that the imported video seemed lossy on playback or for whatever other reason seemed not as good as the source video.
Unfortunately, the results on the new/new were no better than the old/old. So I switched to my wife's (even newer) machine running Windows 8 and got the same results. Then I thought that perhaps the output to DVD would be better than what I saw in the PrE editor. No dice.
The video quality of the source isn't the greatest (see below), but I expected that the PrE 12 would be no worse.
What went wrong?
Here's what i'm working with on the current project:
Machine 1:
HP EliteBook 8560w
Intel Core i7-2640M 2.8 GHz CPU
Window 7 Enterprise SP1
2 GB RAM
360 GB available HD space
Machine 2:
Dell Inspiron 3521
Intel Pentium 2117U 1.8 GHz CPU
Windows 8 Touchscreen
4 GB RAM
400+ GB available HD space
Video Source:
iPhone 4 video (MOV format)
Thanks for ANY help you can give me.
BTW, I noticed that Steve Grisetti is one of the frequent commenters on this forum. In case you're reading this, Steve, I want to thank you and Chuck E. for your PrE books. I purchased one several years ago and found it extremely helpful. And surprisingly, I found that with PrE 12 I could still use the book that I purchased before because most of it was still relevant to the new software. Still a great purchase!!

kcarter
Please excuse if I mention things you may already be aware of, but I did not want to take anything for granted.
The installed RAM on Machine 1 is too low for HD work, and I wonder about the processor on Machine 2 even though it has more installed RAM than that on Machine 1. For now, I will bypass the usual drills and get to the source media and project settings.
1. From what I can put together, your source media from iPhone 4 are 720p up to 30 frames per second. That usually translates into a variable frame rate which can be problematic for Premiere Elements. The variable can lead to audio out of sync, but not necessarily. If all else fails, then it is onto HandBrake or the like to change the variable into a constant frame rate.
2. One of the features of version 11 and 12 is the program taking over the setting of the project setting based on the properties of the first video drag to the Timeline. Some times it does it OK, sometimes not. When not, then you set the project preset manually yourself based on what you know to be the properties of your source media. Please refer to the following which includes how to set the project preset manually.
http://www.atr935.blogspot.com/2013/04/pe11-accuracy-of-automatic-project.html
Based on what I have read about the properties of the iPhone 4 video, I would suggest the project preset (assuming a NTSC set up)
NTSC
AVCHD
AVCHD-LITE 720p30
One of the important things to remember is that Premiere Elements 11 and 12 have as their default project preset
NTSC
AVCHD
Full HD1080i30
and not the NTSC DV Standard of versions earlier than 11.
When 11 and 12 do not get the automatic project preset correct, they do not give you the closest fit, rather they give you their
default NTSC AVCHD Full HD1080i30 which is not going to be appropriate for 720p video.
Classically it is written if you have the correct project preset you should have no colored line over the content when you bring the video to
the Timeline manually set. But, just the variable frame rate can trigger the unrendered indicator (orange instead of red in versions 11 and 12).
So, rendering the Timeline would be indicated to get the best possible preview under these circumstances.
Do you have the latest version of QuickTime installed on either of your computers?
More later.
ATR

Publish+Share signifcantly reduces video quality in Premiere Elements 13

As the title states, whenever I publish and share a video in Premiere Elements 13, the video quality is drastically reduced to an almost unwatchable level compared to the original video This is even the case before any effects are added to the video. If I add the media to the timeline and then directly publish+share before any changes are done, the video quality is still ruined. When I click play full screen in elements, the quality and resolution is exactly where I want it, but once again, when I share the video, it's essentially destroyed.
When I play the newly created video there is giant black space above, below and to the sides of the video (where there is none in the original) and movement in the movie causes the video to grain with black lines.
I have been playing around with settings and researching online for a long time now but I can't seem to find the solution. What I have been doing is going publish+share, ---> Computer, ---> AVI. Then in advanced settings the video codec is selected to DV NTSC, and the basic video settings which are locked in (which I can't change) are set to quality 100, width 720, height 480. The Aspect is D1/DV NTSC (0.9091). I have selected render at maximum depth. I have also tried saving it as MPEG and other video types but the result is the same.
Any help would be greatly appreciated. I understand that I am new and have lots to learn, but it seams so strange to me that the simple process of putting a video in Elements would essentially destroy it. Thanks again.

HSTompson
It was not until Mary Lou Frost posted in your thread today that I realized that I did not see and reply to your questions in post 4 of your thread (dated December 15, 2014). Sorry about that.
If you want to match up the properties of the export file with the properties of the Timeline source media, often you need to direct your attention to
a. Publish+Share/Computer/......and trying to match up the video (especially) and audio compressions of the import with those of the export choice.
b. A frequent cause of a difference between import file size and export file size is the bitrate used by these files. The higher the bitrate, the greater the quality, but
the larger is the file size. So, trying to match import file and export file bitrates is also on the agenda. See the preset's Advanced Button/Video Tab and the settings
there for bitrate. The units for bitrate will be either kbps kilobits per second (also seen as Kbps) or Mbps megabits per second. We can go into that further if necessary.
Premiere Elements allows for the setting of one project preset which should match the properties of the source files. If you have "mixed source files", setting up the
project can become a challenge. The rule of thumb that I typically use involves setting priorities...
1. If videos and stills, I will set for the properties of the video and then size (or let the project size) the still to the frame size of the video
2. If just stills, I try for 1920 x 1080 stills and import them using a DLSR 1080p project preset...that seems to give sharper end product results when doing burn to disc.
Please review and consider and let me know if I have targeted your questions. Any questions please do not hesitate to ask. I try to respond daily to questions, so, if you do not see a timely, response, please send me an Adobe Forum private message asking me "What happened to you?".
Best wishes.
ATR

Did Apple fix the video quality issue in iMovie '09?

I am a casual video editor and iMovie 08 had the perfect user experience / functionality for what I want to do.
However, the known video quality issue (throwing away interlaced scan lines) made the result unacceptable since I archive our family video on DVDs. I have been forced to use iMovie HD for that reason. I have tried tricks such as converting the original DV files to AIF and deinterlace prior to import into iMovie08 but that did not seem to work either.
So does anyone know if Apple fixed the video quality issue in iMovie '09.
MESSAGE TO APPLE IF YOU ARE LISTENING:
Please fix the video quality in iMovie09 if not already. Yes, the quality is ok for YouTube or Internet video but for those of us who want simple editing to archive our family video we cannot accept poor video quality. Dropping an interlace field effectively halves the vertical resolution. Thank you.

Please explain this in more detail when you say Adaptive Deinterlacer. Are you talking about another program? If so, what program and what are the specific steps.
Also, sounds like you are recommending imovie09. By saying to do the above, are you saying imovie09 still causes you too loose significant quality like imovie08? Are you saying you can use imovie08 or imovie09 with these steps to get high quality video or just imovie09? I guess I just need more specifics on how you do what you are describing and how imovie09 fits into this versus imovie08. I joined this whole discussion trying to figure out if upgrading imovie09 made a difference regarding the whole quality issue. I know it has more features, but I am more concerned about he quality of the video right now. Thanks.

Poor quality Skype Video Calls with good connectio...

suffering with Poor quality Skype Video Calls and also voice.
My connection is 8 mb Download and .6mp upload, my wife in another country has Fiber so is alot faster again.
I am using Windows 8.1 and also a Ipad Air, same issues on both.
The Windows Pc has a nice microsoft Hd webcam (not one of the cheapones) using a i7 pc with 16g of Ram and a Gaming Graphics Card.
There is very little software on the pc, a couple of games, no itunes, Downloading software and very little running in the background. I use Window Defender and Anti virus and have recently done a re instal of windows and everything is updated driver and software wise, including skype.
The Ipad is the Apple air.
When connecting to my Wife in the Uk the reception isnt great picture wise and after a little while gets bad and also disconects alot and then comes back with a worse picture and call quality. I have even had the bad connection pop up. I have ran speed tests at these points and all are showing fine.
I also have a issue when calling my Dads land line in the uk where he has trouble hearing what im saying, muffled and echos
I am a premium paying customer and started to get a bit frustrated.

@Furgan, in which country are you located? Some countries and ISP-s are shaping Skype traffic. One known country is Saudi Arabia for example.
If would help us if you could please reproduce the issue and provide logs as described in this link https://support.skype.com/en/faq/FA12321/how-do-i-create-log-files under Skype for Windows Desktop and attach it to your post?
Thank you

Video Quality-Compilation Video

Similar Messages

Maybe you are looking for