Video Quality on dvdsp Menus

Hi Ive just moved from iDVD to DVDSP
and noticed the Quality of the Video on DVDSP Menus looks very poor compared to Video on menus
IDVD?

What are you doing with the menus? What sort of video are you bringing in?
To get the best quality, you should send your standard definition video through Compressor and create a MPEG-2 file. Create your overlay file in Photoshop. Bring both files into DVD SP and define your button areas. Do not add any text or graphics with DVD SP.

Similar Messages

4x3 DVDSP Menus from 16x9 anamorphic video

Title: 4x3 DVDSP Menus from 16x9 anamorphic video
Goal: Create 4x3 scaled videos from 16x9 anamorphic asset
Asset: NTSC - CCIR 601 / DV ( 720 x 480 ) from Sony DCR SR-300
Solution:
Create a sequence; cmd-0 to see settings;
Turn on Pixel Aspect Ratio anamorphic 16:9 ( this makes the Canvas look like wide screen )
Select custom frame size; Set WidthxHeight 480x480 ( Canvas now looks 4:3)
Because:
Pixels are 16:9 so while 640x480 is in 4:3 ratio, the pixels are wide so the frame is wide
Meaningfully mnemonically: 480 is three-quarters of 16 so reducing the frame width to 480 gives you fewer pixels wide but the wider pixels push the outside dimensions of the canvas to the 4:3 you need for the DVDSP menu display.
Caveat:
When loading a clip into the sequence, say No to setting the Seq Settings to the Clip settings.
You've customized the sequence and you don't want the clip to change you sequence customization.
Verification:
I saved this as a QT Ref Movie; loaded it to a DVDSP 4:3 Menu and it looked the way I expected.

4:3 Menus from 16:9 clips

Video quality of burned DVD way inferior to content viewed in iDVD program

I notice the video and menu quality on my burned DVD is VASTLY inferior to video and menu quality when viewing menus and content in the iDVD program while building the presentation.
Having encoded at "Professional Quality" to a single layer DVD which didn't look so good, a number of posts in this forum suggested that "Best Performance" actually renders the best video quality.
I'm using high-quality media from Verbatim so that's not a problem. The DVD's burn fine.
The content -- all high-quality QT movies with great resolution, color and crisp text and animation, look great in and of themselves, and when viewed in the iDVD program. The menus and clips embedded in the scene select buttons, all look crisp and clean.
Burned to DVD however, the video looks noticeably "worn" and the clips in the buttons lack any kind of crispness or resolution. Definitely disappointing. The animations look herky-jerky.
Anyone know what the problem is?

Hi
No iDVD has a fixed quality - as old time TVs
• PAL 625 lines (720x576)
• NTSC 520 lines (720x480)
so Your Mac screen are way higher resolution.
There are NO HD version of iDVD - yet
*DVD bad quality*
copy of an answer on a similar question - may be of help
the iMovie 08 & 09 don't apply
There are two problems in this question.
• iDVD
• iMovie'08 or 09
iDVD - can only handle Standard definition TV quality - NO version can handle HD !
SD-TV
EU - PAL system = 625 lines analog display (no pixles) 25fps
US - NTSC system = 520 lines and 29.97 fps
That's the best iDVD can do.
iMovie up to version HD 6 - could handle interlaced video (displaying every second line
first then start over with the rest - 25fps = 50 frames of interlaced video
less flickering.
iMovie'08 and 09 has destroyed this by deleting every second line
Result a resolution of
PAL 312 lines
NTSC 260 lines
So photos displayed this way will look crappy.
Improvment
Use iMovie HD 6 or FinalCut Express or Pro
Else only way I know of to get "full" quality is by using other tools all together.
Roxio Toast™ 10 Pro (incl BR-component) and here the included FotoMagico™ for SlideShows.
Toast™ also can burn Blue-Ray - even on standard DVD (but much less eg 20 min movie)
These BR-DVDs Can only be playbacked on a Blue-Ray Player (eg PlayStation 3)
But they look super.
A more specific part reg. FinalCut
I do in FC-Express or Pro
• Export out as a QuickTime .mov file
• Not selfcontained (not important but saves time and spaces)
• NO QUICKTIME CONVERSION (Important)
I use
• Verbatim DVD-R disks
• Burn at a reduced speed x1 or x4 recommended by many)
• Secure a minimum of 25Gb free space on internal boot hard disk for 4x3 SD video
and my guess is that I would secure 5 - 6 times more for 16x9 HD
(Still no version of iDVD can do HD)
Yours Bengt W

Problem with video, Quality gets all messed up

I'm burning a video thats about an hour and even minutes long, with about 3 short little extra videos on there that are about five minutes long each
I burned the DVD with best quality.
The Menus are fine, and two of the short videos are fine
but after like 5 minutes on the main video, it starts to get all distorted and chopy and all this green distortion comes up and its just a mess
I would burn it with best performance, but it says its to long for that
I NEED HELP!!

QT and FCP show you different colors. You need to go into QT and enable FCP color compatibility. I believe it is in the SHOW MOVIE PROPERTIES, then the VIdeo track, then VISUAL SETTINGS. Somewhere in there.
Shane

2 questions: Video quality and another...

Hey everyone! Newbie to the forum but I have two questions
1.) I decrypted DVD and converted them (along with other videos) to .MP4 files using Videora iPod Converter. Yet the video quality when connected to the TV is not as good... is there a way I could change this? Perhaps a different program?
2.) I was also wondering, since you can see the video playing on TV, is there a way you could show the menus and everthing else (games, notes, etc.)??? I have iQuiz and that'd be fun to do on the TV!
Thanks much. Love the products Apple!!!
KennyG

In general, the only thing you can get to appear on a television screen is video content. There are a couple of third party docks that will show some menus (Griffin, DLO). But currently, not notes or games.

Last-minute help! Video quality drops after burn

I'm exporting a video out of FCP using Compressor, saving directly to the DVD format for burning inside DVD Studio Pro. When I preview the video inside DSP, it looks amazing. After I finish burning the disc and view it in DVD Player, the video quality looks horrible.
See a screenshot here:
http://www.door62.com/temp/DVD-quality.jpg
The one on the left is DVD Player, the one on the right is the preview inside DSP.
Any advice? This is actually ridiculously last-minute... Any help would be hugely appreciated

I have been having simliar trouble, esp. with textured backgrounds in the video.
Specifically, someone sitting in a board room delivering a short message (2 minutes) on camera. The background is a textured wood panel with a continuously changing color gradient.
I encode in Compressor, NTSC lower field, 2-pass VBR, 6.1 Mbps avg., 7.2 Mbps max., AIF audio. I have also tried a number of bit rate variations including CBR and AC3 audio.
I drop the clip in a DVDSP track and it looks fine in simulator. Also open the m2v in QT Pro, it looks fine.
After building, I check the TS_Folder in Apple DVD Player, and the background pulses, shifting from light to dark and is filled with artifacts. It looks even worse on a set-top player.
I have had problems like this a number of times, and end up having to use other programs on Windows to get around it. Kind of a pain.
Has anyone else seen anything like this?
G5 Dual 2.3 GHz Mac OS X (10.4.8) 2.5 GB RAM, ROM v5.2.4f1
G5 Dual 2.3 GHz Mac OS X (10.4.8) 2.5 GB RAM, ROM v5.2.4f1

Video Bitrate too high, even reducing video quality

I'm having difficulties on building a DVD9 that I need to send to the factory.
Even though I reduced the video quality from 6.6 to 6.4, the problem still happens.
Does anybody have any idea of how to make this thing build, without converting the 2.0 audio to .ac3?
Is the problem, anyhow related to the Max Bitrate, on VBR?
If yes, using a 6.5Mbps CBR will my problem be solved? The quality of the video will be harmed? How bad?
Here are the specifications:
Space occupied: 7.3 GB
Main video:
Duration: 85'
Encode: mpeg2 One pass VBR
Average Bitrate: 6.4Mbps
Max Bitrate: 7.5Mbps
Audio: 2.0 PCM
5.1 Dolby .ac3
Making of:
Duration: 15'
Encode: mpeg2 One pass VBR
Average Bitrate: 6.3Mbps
Max Bitrate: 7.4Mbps
Audio: 2.0 PCM
Menus
3 motion Menus with .ac3 audio
3 static Menus with .ac3 audio

There is a tutorial on the proper settings for AC3 encoding at; http://www.kenstone.net/fcphomepage/a_packwarmouth.html
The tutorial is on A.Pack, which has been since folded into Compressor, but the settings are the same. If its done right, the ac3 file will sound identical to the PCM file.
BTW when you provided audio samples for the client to listen to did you tell them, "This is the compressed ac3 file, and this is the PCM file." Or did you correctly tell them, "Listen to these two files, sample A and sample B, and tell me which sounds better, or do they sound the same." And obviously you cannot have them look at the files because one will be significantly smaller than the other.

Comparing video quality of AVCHD BluRay discs using Final Cut Pro Share vs Compressor

Up front, I will admit to being a newbie when it comes to using Final Cut Studio 3 and would appreciate some feedback from the Apple forum experts.
I have spent a lot of time trying to determine how to achieve an optimum group of Compressor 3.5.2 settings so that the playback video quality of an AVCHD BluRay disc is equal to or better than one created by using the simpler auto settings of FCPro Share, version 7.0.2.
When using Compressor’s auto/default maximum settings, I experienced the same error message reported in:
Error MessageDuring Creation of Blu-ray Disc in FCP and Compressor 3.5
https://discussions.apple.com/message/12073794#12073794
I have since made some Compressor AVCHD Discs with smaller bit rate settings and compared video quality with a single FCP Share AVCHD disc. Both seem to be equal in providing a very good video when viewed on my new Panasonic DMP BDT 310 BluRay player. However, the Compressor AVCHD discs show some motion artifacts not present with the FCPro Share version, especially when scrolling text or when objects are moving through the field of view, and visible artifacts are seen from a stationary chain link fence and other lattice work in the background of the video sample.
My sample video used for the comparisons between Compressor and FCP Share discs is a 21 minute duration home movie, originally captured from a mini DV, Canon HV30 1080i camcorder using ProRes HQ encoding(1440x1080), and dragged into FC Pro 7.0.2 timeline where 10 chapter markers have been inserted.
To create an AVCHD disc using FCPro Share, Markers are used to set the IN and OUT points, Select IN to OUT from the timeline, pull down File Menu Share, Select Create BluRay from options in pop out Share pane, and designate output device along with picture files for Background, Logo, and Title options. When these are completed, click on Export. My 21-minute video required almost two hours for encoding including about 10 minutes for burning. This accomplished on an iMac 3.06 GHz Intel Core 2 Duo.
To prepare this same 21-minute video for use with Compressor, I again Select IN to Out from the FCPro timeline, but this time use File Export as a QuickTime Self Contained movie including Chapter markers. Then Open Compressor, choose Create BluRay from Template pane, right click on the down arrow in the Batch window and load the QT self contained movie file. From there I went to the Inspector window and tried various combinations of bit rate settings along with Frame Encoder options such as Better or Best motion parameter controls.
I have tried the following combinations of Bit rate settings along with varying Frame Encoder controls and burned an AVCHD disc for each example:
Example A
Compressor set to 6 Mbps Average and 8Mbps Maximum, Frame Encoder settings OFF. Approximately 4 hours to encode although the time remaining estimator indicated a larger value of ~7 hours; not an accurate estimator at all.
Example B
Compressor set to 6 Mbps Average and 8Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motionadaptive)” settings. Approximately 4 hours to encode, not the 13 hours that were estimated.
Conclusion: Comparing A & B Compressor versions, Disc B showed some improvements in reducing motion artifacts over Disc A.
Example C
Compressor set to 13 Mbps Average and 15 Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motion adaptive)” settings. Multipass checked. DeInterlace was checked. Unknown hours to encode; about 8 hours done overnight..
Conclusion: Disc C showed some minor improvements reducing motion artifacts over Disc B
Example D
Compressor Auto settings,i.e., 15 Mbps Average and 17 Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motion adaptive)” settings. Multipass checked. Approximately 12 hours to encode, done overnight. Inserted disc next morning after the overnight encoding was completed, and a few minutes later an error message pane appeared that the maximum bit rate had been exceeded. This message was consistent with the Apple posted thread referenced above. Unfortunately the long overnight encoding was wasted.
It seemed to me that the best Compressor settings for suppressing the motion artifacts were displayed by the disc burned in Example C, i.e., 13/15 Ave/Max Mbps with“Better” Motion settings in the Frame Encoder.
However, when this disc was compared to the AVCHD Disc burned using the FCPro Share, the latter still seemed much better. I do not know what the auto bit rate values are as set in FC Pro, but for me, the quality is quite good AND the motion artifacts are significantly reduced, especially evident with the scrolling text.
Sorry about this long post, but I thought the detail would be necessary for the experts, and maybe helpful to others trying to get started in this BluRay arena. Did I misuse Compressor? I think the sample video exported as a self contained QT movie was the right thing to do? Not sure where I went wrong.
Thanks in advance for Feedback and Recommendations. For now, I’m going to stay with the simpler process using Final Cut Pro Share function.
BoBo

Thank You, Brad, for responding; glad to hear I'm not the only one having similar Compressor issues.
You may have hit on something. Perhaps Compressor's use of H.264 encoding was the reason for my motion artifacts? And perhaps Final Cut Pro Share retains the 1440x1080 quality as it burns the AVCHD BluRay disc?
I had Toast 10 for less than 30 days a couple of years ago, and was lucky to get a refund.
What version of Toast do you have? Wondering if new Toast 11 has improved previous bugs, especially upgrading its Chapter text, pictures, music. I would go back to Toast if it came close to mirroring DVD Studio Pro, or even iDVD capabilities.
Thanks,
BoBo

MacMini - LG 32" (32LB75) Problem - Poor video quality and now no picture.

Hi there, apologies for the length of this post....
I purchased a mac mini 1.8Ghz with 2Gb RAM yesterday with a wireless keyboard and mouse and hooked it up to my 32" LG 32LB75 using VGA. On startup the display looked ok, I managed to click through the various Leopard initialisations. I bought the machine for use as a front room media player for mainly DivX movies and the occasional bit of music.
Once I had installed the DivX codec I opened a DivX file in Quicktime and selected "full screen mode." As soon as the movie started I became quite disappointed. The picture quality was quite pixelated ("noisy") and certainly not as good as when I play the same movie file from my old dell PC on the same LG tv (the dell PC has a 64Mb PCI radeon 7000 which connects to the tv using the same VGA port as the mac).
Anyway just to give the mac a fair go I thought I would try out some genuine quicktime video samples from the itunes store (this time viewed from front row)....again not brilliant.
So I thought I would investigate the screen resolution to see if I could improve things. It appeared the resolution was set to 1900 by 1200ish I say "ish" because I can't remember exactly. I then attempted to reduce the resolution and eventually I settled on one that looked quite clear with the font size big enough to be easily read. Again I tried the movie and there wasn't much (if any improvement). Whilst changing resolutions the screen would go blank for a few seconds but on one particular setting (can't remember exact numbers) the display went blank and never came back. The tv now just displays "no signal".
I despaired and connected the mac to a 17" Iiyama montior that I use with a PC and it worked ok. However each time I tried to "hot swap" back to the television I would end up with no picture.
I'm really disappointed because everything else about the mac I really like. Particularly the remote for frontrow which is precisely what I wanted it for. The problem is I've spent over £500 and now seem to have a lesser quality picture than I had to begin with (ignoring for the moment that I don't have any picture!!)
Anyway my questions are these, answers to any or all most appreciated.
1) what is the easiest way to get my mini to start displaying on my tv again?
2) what would the optimum resolution be? My television mentions 1366 x 768 in the manual
3) If the mini doesn't offer this resolution in the pick list is it advisable to "force it" using some alternative software (ie 3dexpress.de)?
4) Is the video quality affected by the software player? ie would VLC give better picture with DivX over quicktime/itunes/front row?
5) How likely is it that the video resolution of my new mac mini isn't "as good" as my old dell machine with its PCI graphics card?
6) Finally if I don't get results as good as my existing PC setup, how accomodating are apple with refunds? I bought it from a UK high-street apple store. The back of the receipt mentions a "14 day not satisfied" return policy but then goes on to say something about being "unopened"...which seems a little confusing. Ie how do you know if you're satisfied until you've actually used it?

Hi there
the solution was to remove the various display config files in leopard and then restart the machine, this got my display back on the tv (albeit off centre). To fix the "off centre issue" I used the LG "auto correct" feature from the remote control "menu > screen" options.
The apple support site describes how to remove the affected leopard display files here http://support.apple.com/kb/TS2213?viewlocale=en_US As you will see their resolution consists of 2 main steps, the first one involves starting your machine in safe mode, if this doesn't work then you proceed to the second step where you remove the files using a terminal prompt.
I didn't bother with the first step mainly because I don't think I can start my mac in safe mode since my only keyboard is wireless (bluetooth). So I connected the mac mini to a 17" LCD monitor (which thankfully did display the video signal ok) and removed all the listed files using terminal. I then shut the mac down, swapped the VGA cable back to the LCD tv restarted the mac and it detected the tv and set a resolution that worked. I then very carefully reduced the resolution down to one that was recommended by my tv (1300ish.. x 768ish??).
At this point I was back to having an acceptable signal but still a little off centre. So I used the TV remote, pressed menu, went into screen options and chose "auto correct". Picture then filled the screen perfectly.
The problem seems to be, leopard lists a bunch of resolutions that it believes your tv/display can handle but it would appear that in fact some of these resolutions are not supported by your TV and if you choose one of these your signal disappears and you can't get it back.
I would still say that I'm not 100% convinced with the mac mini's onboard graphics (I have a 1.8GHz version). I'm going to download some HD content and see if that improves things, but certainly my existing DivX collection looked a little sharper and clearer and better coloured using my old dell PC with its radeon PCI card. But the difference in picture quality is outweighed by the convenience of its size and the font row interface. I might tinker with putting Windows Media Center on it one day, perhaps that might improve things.

Macbook Pro to VIZIO LCD TV via HDMI Grainy Video Quality?

So when I bought my MacBook Pro back in July 2010, I purchased an assortment of accessories to go with it including a special third-party Mini DisplayPort to HDMI Adapter device off of eBay. The HDMI Adapter device works mostly the way I expected it to. That is, the video and audio signal coming out of the MacBook is channeled into the LCD TV display properly so that I can see the computer video display on the LCD TV and sound is also coming out of the TV too.
Just one minor annoyance: video quality. Actually, the picture is perfectly fine and beautiful, except for some reason I get weird video artifacts that are basically tiny specs that quickly fly across the screen very rapidly and they are all over the video display. Almost like the video signal is partially grainy or fuzzy or something.
I've tried to Google to see if anyone has reported any similar problems, but no luck. I wish I knew exactly what device in this process is the culprit of this behavior; i.e. either the MacBook, the HDMI Adapter, the HDMI Cable, or the LCD TV (Vizio SV470XVT 47" 1080p 120Hz LCD HDTV).
If anyone can help to possibly instruct me how to fix this problem or how to further diagnose the problem, I would greatly appreciate it.

For a 2010+ MBP you can connect with a Displayport to HDMI, which will include Audio.
With older MBP you will need a displayport to HDMI, if you want audio to the actually TV, then you will need to get a cable with either digital out from MBP to the HDMI, or USB audio mixed into the HDMI
eg
http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/

FCP Novice needs help with video quality and FCP 5!!

Hi,
I have a real problme that I cannot seem to fix. I think its because I am doing something really wrong!
I have a Sony HC42E MiniDV Camcorder which by default records video in full widescreen. I recorded several tapes this way and have now begun trying to edit them in FCP 5.04 (Tiger 10.4.6). Whenever I log and capture my clips they appear to be fuzzzy and unclear on the Mac monitor whilst being totally crisp and sharp on the camcorder viewfinder. I tried capturing using the DV PAL 48Khz Anamorphic Preset which keeps everything the right size (the final output needs to be true widescreen and not with black bars added) but the resulting video on screen is blurry and bitty. I then tried capturing using the DV PAL 720 x 576 normal preset and the video is a little clearer on the screen (for both presets I have chosen lower field dominance) but when I play back it plays back in widescreen on the mac canvas window but at 4:3 on the camera's viewfinder.
I then assumed that maybe this is just becuase the mac screen (CRT by the way) doesn't use fields. So I exported the sequence as a QT movie using DV PAL 16:9 and used quicktime (OS9 Classic - my compressor has never worked because of the dreaded "unable to connect to baackground process" problem which I've never managed to correct) to convert it to MPEG2. When I import this as an asset into DVD Studio pro 4 and set the track size to 16:9 it comes through at the right aspect ratio. However it looks blurry on screen. Thinking that this will be fine on a TV I burned the disc - inserted it into my DVD player (a good one!) and watched it on my new 32" widescreen TV (a good one!) and the picture qualitty is poor. Its so much blurrier and bittier than the original footage looks when played through the camcorder's viewfinder!
The final footaage looks like an old VHS recording that's a year or two old!
Does anyone know how I can capture my footage in FCP with the maximum quality, edit it without quality loss and the export it for DVD again without such significant quality loss whilst all the time keeping it at proper 16:9 widescreen?
Is there some presets I should be working to?
I'm tearing my hair out! Help!

Hi Guys,
thanx for your replies.
here's the latest:
Brian, I followed your instructions and the DVD burned successfully. However the video quality of the dvd when viewed on my TV ('ve tried on all 3 of my tvs now) is still a lot poorer than the quicktime movie that was imported into DVDSP4. When I play the original QT Movie on my Mac CRT monitor it looks a little blurry and grainy because I guess its non interlaced however when viewed on an external Video monitor it looks great - very sharp.
When I view the burned DVD on my television the picture quality looks like the non interlaced version of the original QT Movie that appeared on my Mac CRT and not the sharp interlaced (lower field) version that appeared on my external video monitor.
Its almost like taking a sharp jpeg into Photoshop and applying a gaussian blur of about 0.3 followed by jepg compression compressing it down to 5% quality!
I'm totally mystified. Can the conversion to Mpeg2 be removing all interlacing so that you get the less sharp computer monitor look? I just want the video on my final DVDs to be as good as the original source footage! I appreciate that along the way there might be loss of some quality but surely not that much?
Does this make sense to you guys or am I still doing something very wrong?
Robert: I have tried setting all manner of drives including a fresh external firewire HD with nothing on it (clean out of the box) but it doesn't seem to help.
Brian: I tried the no network suggestion a few months back but I'm not sure if I got it right. At the moment I have broadband through an external speedtouch usb modem and am also connected (occasionally although not for the last 3 months) via a crossover cable to my PCs ethernet card. When I last tried the No Network solution I had immense trouble getting my internet to work again! Can you please help me by directing me to the best ay to do this while protecting my internet settings?
any more help guys would be greatfully appreciated.

IPhone 6 Plus video quality is extremely poor when on Facetime and when sharing via text/message

I upgraded to the 6 plus from the 4S. Everyone that I facetime with and send videos to via text/message tells me how incredibly horrible the video quality is....especially in comparison to the way it was before I upgraded from the 4S to the 6Plus. These are people that I have always sent videos to and Facetimed with before, and they all say they can really tell a difference. So frustrating that my three year old iphone 4S is better than the new 6 plus 128gig that I just paid $500 for. We have little ones at home and this is one of the main things we use the phone for....to send vidoes and to Facetime with grandma and grandpa.
I'm on the same carrier (Verizon) that I have always been and have not changed anything. Is there a setting on the phone I can change that will help with this? I love the phone otherwise, but if it can't do this right, I'm going to return it and get my money back.
Can anyone help? Anyone experiencing this???
Thank you.

I have the same issue!! Why isn't there any answers to this problem? I became the laughing stock who owns a $1000 iPhone that can't share videos with family and friends. Please help!!!

How should I best import HD Videos from the new iPad to my mac without loosing video quality?

The new HD video on the new iPad is awesome, but it can eat up a lot of memory in no time. I would like to know what is the most recommended way to export my ipad movies to iLife on my mac without loosing image quality, so i can free up space on my iPad.
If I use iPhoto I notice that the file size of the video from the new iPad is a lot smaller then if I use iMovie to import the same video.
Example: I import a 53 second video from the new iPad to iPhoto and the imported file has a file size of 143 MB in iPhoto. (iphoto save the video as IMG_0048.mov)
I import the same video to iMovie manually and the imported file size is 843 MB in iMovie. BIG DIFFERENCE. (iMovie saves that same video as clip-2012-03-20 16;13;08.mov)
Now to really be confusing: I go to Image Capture program and locate the file manually on my iPad and is has the same name and file size is what is in iPhoto.
So either iMovie is making the File a lot larger when it imports to an event, or the file I'm looking at is actually the iPhoto version that I get because I sync with iPhoto.
The second issue that I have is that now I have 2 videos on my hard drive: one in iPhoto, and one in iMovie for a combined data storage of close to 1 GB.
I would like to be able to import ALL my iPad recording into iPhoto and then delete the video from the device when done.
But if I loose video quality, I'm not happy about that. Secondly, by importing video from my iPad into multiple iLife programs, I'm creating duplicates with sometimes different quality. Any suggestions? is there a setting in iPhoto that can do all this for me?
Robert

Don't use iphoto to deal with movies. it's not really meant for that. use Quicktime or iMovie to work with your videos

Why is playback video quality not as good as the source?

Hi. I'm not new to PrE but am new to the forum.
I've been using PrE 2 for about 7 years. I got a newer computer running Windows 7 and basically was forced to upgrade to PrE 12 because PrE 2 didn't run very well on the newer machine. Once I installed PrE 12, I was eager to jump into my first project on this machine.
I expected that with a newer machine and the latest software, I would get outstanding results--hopefully much better than what I always got with PrE 2 on the old machine. With PrE 2, it was not uncommon that the imported video seemed lossy on playback or for whatever other reason seemed not as good as the source video.
Unfortunately, the results on the new/new were no better than the old/old. So I switched to my wife's (even newer) machine running Windows 8 and got the same results. Then I thought that perhaps the output to DVD would be better than what I saw in the PrE editor. No dice.
The video quality of the source isn't the greatest (see below), but I expected that the PrE 12 would be no worse.
What went wrong?
Here's what i'm working with on the current project:
Machine 1:
HP EliteBook 8560w
Intel Core i7-2640M 2.8 GHz CPU
Window 7 Enterprise SP1
2 GB RAM
360 GB available HD space
Machine 2:
Dell Inspiron 3521
Intel Pentium 2117U 1.8 GHz CPU
Windows 8 Touchscreen
4 GB RAM
400+ GB available HD space
Video Source:
iPhone 4 video (MOV format)
Thanks for ANY help you can give me.
BTW, I noticed that Steve Grisetti is one of the frequent commenters on this forum. In case you're reading this, Steve, I want to thank you and Chuck E. for your PrE books. I purchased one several years ago and found it extremely helpful. And surprisingly, I found that with PrE 12 I could still use the book that I purchased before because most of it was still relevant to the new software. Still a great purchase!!

kcarter
Please excuse if I mention things you may already be aware of, but I did not want to take anything for granted.
The installed RAM on Machine 1 is too low for HD work, and I wonder about the processor on Machine 2 even though it has more installed RAM than that on Machine 1. For now, I will bypass the usual drills and get to the source media and project settings.
1. From what I can put together, your source media from iPhone 4 are 720p up to 30 frames per second. That usually translates into a variable frame rate which can be problematic for Premiere Elements. The variable can lead to audio out of sync, but not necessarily. If all else fails, then it is onto HandBrake or the like to change the variable into a constant frame rate.
2. One of the features of version 11 and 12 is the program taking over the setting of the project setting based on the properties of the first video drag to the Timeline. Some times it does it OK, sometimes not. When not, then you set the project preset manually yourself based on what you know to be the properties of your source media. Please refer to the following which includes how to set the project preset manually.
http://www.atr935.blogspot.com/2013/04/pe11-accuracy-of-automatic-project.html
Based on what I have read about the properties of the iPhone 4 video, I would suggest the project preset (assuming a NTSC set up)
NTSC
AVCHD
AVCHD-LITE 720p30
One of the important things to remember is that Premiere Elements 11 and 12 have as their default project preset
NTSC
AVCHD
Full HD1080i30
and not the NTSC DV Standard of versions earlier than 11.
When 11 and 12 do not get the automatic project preset correct, they do not give you the closest fit, rather they give you their
default NTSC AVCHD Full HD1080i30 which is not going to be appropriate for 720p video.
Classically it is written if you have the correct project preset you should have no colored line over the content when you bring the video to
the Timeline manually set. But, just the variable frame rate can trigger the unrendered indicator (orange instead of red in versions 11 and 12).
So, rendering the Timeline would be indicated to get the best possible preview under these circumstances.
Do you have the latest version of QuickTime installed on either of your computers?
More later.
ATR

Publish+Share signifcantly reduces video quality in Premiere Elements 13

As the title states, whenever I publish and share a video in Premiere Elements 13, the video quality is drastically reduced to an almost unwatchable level compared to the original video This is even the case before any effects are added to the video. If I add the media to the timeline and then directly publish+share before any changes are done, the video quality is still ruined. When I click play full screen in elements, the quality and resolution is exactly where I want it, but once again, when I share the video, it's essentially destroyed.
When I play the newly created video there is giant black space above, below and to the sides of the video (where there is none in the original) and movement in the movie causes the video to grain with black lines.
I have been playing around with settings and researching online for a long time now but I can't seem to find the solution. What I have been doing is going publish+share, ---> Computer, ---> AVI. Then in advanced settings the video codec is selected to DV NTSC, and the basic video settings which are locked in (which I can't change) are set to quality 100, width 720, height 480. The Aspect is D1/DV NTSC (0.9091). I have selected render at maximum depth. I have also tried saving it as MPEG and other video types but the result is the same.
Any help would be greatly appreciated. I understand that I am new and have lots to learn, but it seams so strange to me that the simple process of putting a video in Elements would essentially destroy it. Thanks again.

HSTompson
It was not until Mary Lou Frost posted in your thread today that I realized that I did not see and reply to your questions in post 4 of your thread (dated December 15, 2014). Sorry about that.
If you want to match up the properties of the export file with the properties of the Timeline source media, often you need to direct your attention to
a. Publish+Share/Computer/......and trying to match up the video (especially) and audio compressions of the import with those of the export choice.
b. A frequent cause of a difference between import file size and export file size is the bitrate used by these files. The higher the bitrate, the greater the quality, but
the larger is the file size. So, trying to match import file and export file bitrates is also on the agenda. See the preset's Advanced Button/Video Tab and the settings
there for bitrate. The units for bitrate will be either kbps kilobits per second (also seen as Kbps) or Mbps megabits per second. We can go into that further if necessary.
Premiere Elements allows for the setting of one project preset which should match the properties of the source files. If you have "mixed source files", setting up the
project can become a challenge. The rule of thumb that I typically use involves setting priorities...
1. If videos and stills, I will set for the properties of the video and then size (or let the project size) the still to the frame size of the video
2. If just stills, I try for 1920 x 1080 stills and import them using a DLSR 1080p project preset...that seems to give sharper end product results when doing burn to disc.
Please review and consider and let me know if I have targeted your questions. Any questions please do not hesitate to ask. I try to respond daily to questions, so, if you do not see a timely, response, please send me an Adobe Forum private message asking me "What happened to you?".
Best wishes.
ATR

Video Quality on dvdsp Menus

Similar Messages

Maybe you are looking for