Video review great- but renders with some video changed to stills. Why?

I am editing Video on Photoshop CC.
I have done three, no problem. But this project, the review shows my video, but when I render it, a bunch of Video is just a frozen initial still. I have rendered in three different formats- all with the same problem.
All the best
Benentt

We can't know. You have not provided any useful details about your source files, render settings, system info, screenshots of the timeline and whatnot.
Mylenium

Similar Messages

Static image looks fine in media pane but renders with problems

I have a project in which I am placing a few static JPGs over the video portion for a few seconds at a time here and there to illustrate certain things a speaker is touching on. The JPGs are usually not quite big enough to cover the entire frame of the media pane, so I end up having to resize them and make them bigger to either cover the rest of the video that’s still showing, or to effectively ‘crop out’ a portion of the JPG that I don’t want to see in the final output.
Everything looks fine in the media pane. The problem arises when I output the final video to FLV. Some of the JPGs look fine – just as they did in the media pane preview. But a lot of them end up showing portions that I had cropped out, or even portions of the video that I know were covered up. It appears completely random. And when I re-export and try again, sometimes the problem disappears.
Windows XP SP3
Adobe Premiere Elements 9.0
Export format: FLV

One JPG sample is 960x720 pixels.
The Project Preset Frame Size is 1280x720 pixels.
For this particular sample, I stretch the JPG so that the text at the bottom of it falls below the media pane (since both the JPG and the project have the same pixel height). It becomes a little more pixelated, but that's fine. Sometimes it does get cropped out of the final FLV, sometimes it doesn't...

How to copy an IDOC with some minor changes with programming

Hello,
I get frequently a lot of IDOCS who need some minor changes. I'm looking for coding that will act as if you are using transaction WE19.
Who can help?

In short, the customer wanted the functionality of the WEDI transactions to see the incoming data from suppliers. this data should be shown not converted. for our own peace we didn't want those idoc's to be converted along the route to their destination without any visible trace so we wanted new idocs with the converted data. finally the customer (functional consultants mostly) agreed to see the data in it's transported form with the use of XI. (there was a no go from the maintenance departement to do the conversion in XI because of the excessive use of SAP tables).
So, a helpfull tool to copy and along the way change some items within an IDOC
using programming is no longer needed. but I still am interesting to know.

At first firefox great but now with what you have with it i think it sucks big time. now i have to look for something better. sorry

if i had a phone number i would call but you have no number. WHY?????????

Mozilla (like most developers of free software) doesn't provide phone support. However, if there are specific problems you are having with Firefox we'd love to hear about them and help you resolve them. You can let us know here and our community of staff and volunteers will help you.

Sqlplus connects locally but not with tns after changing "log on as"

I can connect to the DB from locally with "sqlplus system/password" however I can't with "sqlplus system/password@mysid".
the only thing we changed was in the service. We changed the service -> properties -> Log On values from "Local System Acount" to "This account" with a valid login and password.
RMAN now works to a NAS drive but getting to the DB is not working. When we had "local System Account" selected, we could get to the DB but RMAN could not reach the NAS drive.
Can anyone help? Oracle 11gR2 on Windows server 2008.
Thanks

Thank you for the help. I fixed it my not only changing all the services to that same user, but I added the user to the administrators and ora_dba groups. Now we can use the NAS drive and get to it from TNS.

HT4053 i have downloaded moves from iphone to pc but cannot watch some of them, any idea why?

i can see some of my movies but others are not supported files, any ideas on why when they were all taken on iphone

When I hover over cover flow it says I have 12851 songs but when I click nothing happens.
When I hover over artists or albums it says 'no artists/albums'.
I can upload again from my CDs but just wondering if there is anything to do. I live abroad so all my CDs are in storage.

Had some old movies from reel to reel on a vcr. i converted these to mp4 format using pinnacle video capture, quality was not great but it was decent enough on my computer. when i placed these on my ipad it was much worse and very choppy. i have handbra

had some old movies from reel to reel on a vcr. i converted these to mp4 format using pinnacle video capture, quality was not great but it was decent enough on my computer. when i placed these on my ipad it was much worse and very choppy. i have handbrake and thought i could maybe change the movie so i could play it on ipad but dont know what dimensions or framerate etc. currently the movie on the computer is in 640 x 480 mpeg 4 aac. thanks derek

Jon,
What Julianne said at first about re-linking made perfect sense and I followed it easily, had actually already been there. But in my situation now, it didn't have any effect. The directory of folders which had already been added were still just as they were, and the outstanding balance are not in the desired position. And the folders which had been brought in earlier today when I clicked "synchronize folder", were still missing all the metadata.
Maybe this means I need to start over, and I'm fine about doing that that, but I don't know what it takes to accomplish that. I'm concerned now that any changes I make out of guesswork could only make the problem harder to resolve. It just feels to me like something I did at the beginning just wasn't right, and now it's a tangle.
Can you advise?
Thanks,
Gary

LR4 Video = Aperture Knockoff - Great --- But knock it off RIGHT !

Hi.....
I dont particularly like Aperture. But I have been using it for a while now to organize my video-rushes.
Particularly trimming the H264 prior to transcode is amazing.
So I saw that LR4 had gotten video capabilities and downloaded the beta.
Great work Adobe. Must say. Really like to be able to WB my clips in Lightroom prior to transcoding. Super.
However, what use is Lightroom really If I cant:
1) Export to a Real-World codec. (You offer H.264 or DPX - Latter is GREAT but a little overkill for an H264 source that doesn't need to go commercial)
2) Import the trimmed clip (with the trims) directly into Premiere Pro or other apps. (I can drag the clip from LR4 directly into PPRO but PPRO will NOT adapt the in and outpoints which is totally stupid ;-)))
The way LR4 implements Video capabilities is an exact knock-off of Aperture 3.
What I ask is that if you have the audacity to so clearly copy Apples features why dont you copy them 100%....
Aperture has the following feature " Export Version " This feature will save the trimmed version of the Movie WITHOUT re-compresing(Re-Encoding). It will save the trimmed version to WHATEVER codec the original file is.
So one can cut off start and ending and SAVE the H264 as an independent movie WITH NO RE-ENCODING. I have Tripple checked it.. Re-saved that timmed file 10 times (Meaning 10 Generations of re-saving).
Putting all 10 inside AE and comparing with difference Mattes yields a black background which means, if you composition background is black, that there is NO differences. IF Aperture would indeed re-encode the 10th generation
re-save of the H264 would look horrible, NOT SO.
Adobe, your Premiere Crew holds the opinioin that ABOVE (Saving an H264 without Re-Compressing) cannot be done without quality loss.) That is why the "Save Trimmed Version" in Premiere Pro does NOT save H264-Trimmed versions but the whole file.
They claim that the movie would loose quality as PPRO would to re-encode. That IS NOT SO. Aperture and Apple have been doing it for a while now.
I know that this is ADVANCED technology and it is difficult to figure out. But perhaps if your engineers cannot figure this one out, you could at least give LR4 Video Users the ability to export the trimmed movie to ProRes or other useful codecs.
Thanx for reading

99jon wrote:
Why not stick to Premiere Pro and set your in and out points there?
Using Lightroom simply adds to the workflow, with another stage of rendering.
I will always transcode.... Working with H264 is NOT an option for professional editing, Speedwise, it is TOOOOOO slow...
I need ProRes. If Lightroom could export to ProRes I could transcode ONLY the core´part of the clip and not the whole clip with extraneous beginnings and endings.
As of now, I'll just transcode everything coming off the FlashCard to prores. Then view it in the Finder. I would LOVE to copy the Flash card to the hard drive (Or import directly) then use LR4 as my Librarian GREAT FOR META DATA. Then transcode ONLY the part I need to ProRes...
Been doing this in Aperture, since V3 came out. And this is a VERY effiecient workflow. Premiere Pro iS NOT A LIBRARIAN where Lightroom is.
TO bad, adobes departments arent really communicatiung with each other. If LR4 developers would just have ONE meeting with the Premiere Pro department, adobe would gain ALL Premiere Pro users for Lightroom in the blink of an eye....
I could just export to DPX(LR4 does that) which I do every now and then, but ProRes is just as good and takes up 10x less HD space... So LR4 def. would benefit GREATLY from being able to export to ProRes.
Besides, LR4 USES Adobe Media Encoder and its presets to convert to DPX and etc... So WHY ON EARTH would adobe limit to DPX and H264... Lazyness ????

Audio no longer syncs with video thanks to some frame changes I made - HELP

I had frame issues with a feature-length movie recorded at 24p and edited on a 24fps timeline. My early settings led to a repeat frame every 3 frames. I have since changed the pulldown, though I don't know from what to what to be honest. Maybe it WAS 2:3:2:3 and now it's 2:3:3:2, or the other way around. Not sure at this point.
I made other changes, too. I found a setting to change from interlaced to progressive, which only made sense since my footage was captured on the progressive setting on the Panasonic DVX100. So I changed that, too.
I may have changed another setting or two as well until the video looked more accurate and lost the 'flicker' or 'jerky' appearance on long, tracking shots.
Through all these changes, the audio didn't suffer anything. Now, with a new audio mix from my sound engineer, the dialogue matches perfectly for the first several minutes, but by the end of the movie, it is off by several seconds. I have tried to revert to my original video settings to see if I can sync the video and audio, but I have had absolutely no success. Even the earlier audio mixes that kept sync through the video changes are now out of sync.
And the movie's length has not changed.
HOWEVER... my music selections have held their positions perfectly throughout. I am at my wit's end with this and I am, no doubt, lacking in explanation to expect one of you experts out there to solve my problem. Anyone who is willing to take a shot at this, please let me know!
I should mention, too, that I have opened a backup copy of the movie from another hard drive - a backup copy saved before any of the video settings were altered. And that file has the same problems, too. I'm frustrated with the way Final Cut handles system preferences and doesn't adjust to the preferences of the individual file, but rather the last saved settings. Makes it difficult to backtrack.
Again, thank you for struggling through this tome and accept my gratitude in advance for any effort given to assist me!
Justen
Message was edited by: prov

It's going to be very important for you to figure out what format your video was captured in. You have almost definitely been editing at a frame rate that was different from the frame rate of your video, which is why you were seeing problems with panning. Have you been watching the video on an external television or just on your computer screen? Chances are there isn't a quick fix for this issue. You're either going to have to learn about this technical stuff or you need to find someone who knows about it who can troubleshoot with you in person. I've written a little bit about editing in 24p on my website. This post is a good start. http://www.kylegilman.net/2007/03/01/24p-headaches/
<Edited by Moderator: Insert Disclaimer to URL>
DISCLAIMER: I may receive some form of compensation, financial or otherwise, from my recommendation or link.
Your audio was probably not recorded in Pro Tools, it was edited and mixed in Pro Tools. How was your audio recorded on set? Did you have microphones going into the camera or did you record into a separate machine like a DAT player or a hard disk recorder?
My advice for now, not really knowing exactly what the problem is, and assuming the timecode on your imported AVI files matches the timecode on your DV tapes is to do a batch capture of your sequence straight from the DV tapes, capturing using the DV NTSC 48 kHz Advanced (2:3:3:2) Pulldown Removal preset. This will at least ensure that your video is at the correct frame rate. Unfortunately it won't ensure that your audio will sync up.
Also, have you tried changing the speed of your mixed audio to either 99.9% or 100.1%? This will not be a complete fix because you still probably have some duplicated frames in your video, but it might put it back in sync.
And make sure you have a back up of your project and media before you do anything else.

I recently updated my iPhone to 5.0.1. My update went great, but when updating my wifes, all her photos and videos were lost. Is there a way to retrieve them?

I recently updated my iPhone. My update went great, but after updating my wifes, all her pictures and videos were missing. Is there a way to retrieve them?

Was a backup done prior to the update? If so, restore the backup.
As designed, the Camera Roll on the iPhone is temporary storage. Copy the pictures/videos off to the computer the device normally syncs with then sync the desired pics/vids back to the device via iTunes.

Wireless video link example works with antenna only but not with SMA to SMA cable

I am trying to run wireless video link example https://decibel.ni.com/content/docs/DOC-22728 . It works fine if I use install antennas on my Tx and Rx USRPs. But it does not work if I use SMA to SMA cable to connect Tx and Rx USRPs. Can somebody guide me what is the reason why it is only workng with antennas but not with SMA to SMA cable.
Thanks
JK

I connect the 30 dB attenuator at RF input port of Rx USRP. But it does not work completely.
Without connecting attenuator i was not able to receive any thing on my Rx VI although it shows waveform. But after connecting attenuator receiver some times receive text messages and some times not. Also it does not work at all for images and for video it works partially but gives some error related to memory full after few mins.
I want to know why this example works completely without any problem if I use antennas, and why it does not work perfectly if i use sma to sma cable for connecting transmit and receive usrps.
Please guide
Thanks
JK

Video chat not working with some people

Okay so iChat 4.0.7 works fine on my computer with video chat but when I do video chat with some people on my buddy list alone just me and that person I invite him/her and him/her invites me. But it always says to these people:
"Starting Video Chat" then after that it says:
THERE WAS A COMMUNICATION ERROR DURING YOUR CHAT every time I do it. Before that it never did this and all of a sudden...? ...makes no sense!
And it works fine with everyone else. And she's not even blocked.

Hi,
Can you send us a copy of the Log.
It contains several parts
A Header listening date and such
A Failure paragraph listing the Error log code.
A possible long section that looks like repeats about posts and INVITES and such
Lastly a section starting "Binary Images for iChat" and continues with a list of everything that is started up on you Mac.
We (I) don't need or Want the last section.
Old Logs are stored in your Home Folder/Library/Logs/iChatConnectionErrors by date and time
Expanded Log with Comments
Not all are this long.
More Info http://www.ralphjohns.co.uk/page16a.html
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
10:09 PM Thursday; April 16, 2009

When trying to import music files I get a error message that says "importer reported a generic error" I'm using windows 7, DellPC, installed premiere elements 13 2 days ago. Also when previewing and editing video,screen looks great but when I transfer to

When trying to import music files I get an error message Thea says "importer reported a generic error". Also when editing video, screen views look great but when I transfer to PC or flash drive video quality is very poor. Any suggestions?

chansen232
Premiere Elements 13 on Windows 7 (presumed 64 bit).....
1. Music files and error message...are these music files from iTunes? If so, convert them to .wav in iTunes to convert them to wav version, and then import the .wav version into Premiere Elements 13 project using Premiere Elements 13 Expert workspace's Add Media/Files and Folders/Project Assets from where you drag the wav version to the Soundtrack.
The following are the instructions for the iTunes converting
http://support.apple.com/en-us/HT1550
If any problems with the instructions, please let me know, and I will go through them with you.
2. How you set up the project and the export settings that you select greatly influence your end product result.
a. What are the properties of the source media?
b. What project preset did you (manually) or the project (automatically) set to match the properties of the source media.
(If you do not know, please tell us what you see for the readings of Editing Mode, Timebase, Frame Size, Pixel Aspect Ratio - even
if the fields look grayed out.)
c. For your export...Publish+Share/Computer/and then what? And what preset? Did you use the default settings of the preset or did you
customize the export settings of the preset under the preset's Advanced Button/Video Tab and Audio Tab?
Let us start here and then decide what next.
Thanks.
ATR

IChat Video Audio: works with some iMacs not others

I have this strange problem.
I can chat with everyone.
I can video and audio with some but not all.
A person I can video or audio chat with can video and audio chat with our mutual friend.
I cannot video or audio chat with the mutual friend.
All machines are iMacs OS 10.4.10 with latest updates.
There was no problem until 2 weeks ago.
Does anyone have a suggestion as to how to solve this problem?
thank you in advance.

Presuming all have got their System Preferences > Quickitme > Streaming set to 1.5Mbps and restarted IChat then...
Change the way the ports are opened in the routing device
http://www.ralphjohnsuk.dsl.pipex.com/page15.html#CertainBuddy
5:02 PM Thursday; August 23, 2007

I own an iPod Classic. In iTunes, some podcast videos cant be played on teh iPod, so I set it to convert the video to the right format for the iPod. It used to work perfectly, but now for some reason, it doesnt convert properly! When I play the video,

I own an iPod Classic. In iTunes, some podcast videos cant be played on teh iPod, so I set it to convert the video to the right format for the iPod. It used to work perfectly, but now for some reason, it doesnt convert properly! When I play the video, it is just a white screen, but the sound can be heard. Can anyone help??????

Your source video file is probably muxed.
Neither QT Pro or iTunes has the ability to successfully encode a muxed video file with audio. You'll end up with video and no audio.
See: iPod plays video but not audio of some exported files.
You'll need to use some other third-party software to do the conversion. There's a handful of software available. Just search the forums and you'll find many titles mentioned.
Try MPEG Streamclip.

Video review great- but renders with some video changed to stills. Why?

Similar Messages

Maybe you are looking for