Video Scopes will not adjust

I did a search so if you have a link to answer this I'd love it. During capture, I want to use the FCP Video Scopes. I can get the waveform monitor and vectorscope to pop up and they show the info but I cannot adjust them. In clip settings, video, the adjustment sliders are not active, they are grey. Help?

I can get the waveform monitor and vectorscope to pop up and they show the info but I cannot adjust them. In clip settings, video, the adjustment sliders are not active, they are grey. Help? < </div>
The availability of these adjustment sliders is clearly explained in the manual. They are not active on digital transfers because DV files are merely being copied from one place to another, they are not processed.
Reading down the thread to where you finally get around to supplying the information we need to help you, your BetaSP has a built-in time base corrector that should have a remote panel on it for controlling the proc amp functions. If it does not, you got ripped off. If you do not know how to operate the proc amp, you will need the Sony's manual.
Unless your BetaSP is really a digiBeta, you will need conventional waveform and vector displays between the deck's analog output and your capture system to accurately portray the effects of any adjustments you make to phase, pedestal, luma, and chroma.
bogiesan

Similar Messages

I opened my iPhoto library today which was stored on an external hard drive and several of my videos now will not play. The weird thing is that each file shows a duration of 1 second and when I open them it just shows one frame. What the

I opened my iPhoto library today which was stored on an external hard drive and several of my videos now will not play at all. The weird thing is that each file shows a duration of 1 second and when I open them it just shows one frame. What the !&%$#@ Where did my original video files go?

Sounds like a good plan, you can never be to safe and having a second External HD is safer than one.
The only thing that I would do different, is setup the 3T as my TimeMachine Backup and then erase and move my Photos, Videos and perhaps even iTunes Media to the 1T. That way you will have room to backup both the Internal Hard Drive and the 1T External Hard Drive to the 3T using TimeMachine.
Take your time, study and use the > Time Machine - Frequently Asked Questions if you get stuck or aren't sure how to make the move.
Also see > iPhoto: How to move the Library folder to a new location
iMovie ’08: Storing or moving your video library to an external hard disk
and > iTunes for Mac: Moving your iTunes Media folder

My videos suddenly will not open or play in LR5. What can I do?

Mac OS 8.5, Lightroom 5
My videos suddenly will not open or play. They've worked properly until this afternoon. I deleted a video while it was still playing and have been unable to view any of them since. Still images are fine.
What can I do?

Do this:
- Plug in you ipod in you latop/Computer like usual and then hold the power btton and the home button at the same to and after you ipod should connect but once you connect restore it right away.
_ if that didn't work. Try going to the closes apple store in your location and tell them the problem your having with you ipad.

Sound on video's will not play through headset on iTunes

Hi All,
I can not get the sound on any video to play through my headset in iTunes, the music tracks in the library play fine. When I start a video I get the first 2 second of sound then it ceases and if I stop a video it will not restart. The video's are a mixture of commercial bought video's and H422 FCP videos converted to MP4.I am using iTunes 11.1.5 on OS X 10.8.5, any ideas ?

UPDATE:
The problem is not present on OS X 10.6.8 where the sound plays fine in iTunes 11.1.5 if this helps anyone

Iphone 3G has stopped playing video entirely. (will not take play videos taken on the iphone no longer play), unable to transfer to computer either. Says Parameter error when I try to copy or play file

My Iphone 3G has stopped playing video entirely. (will not take play videos taken on the iphone), unable to transfer to computer either. Says Parameter error when I try to copy or play file. very frustrating, not being able to access past videos taken at all. This has been going on for a while now

Have you done any of the basic troublshooting steps described in the User Guide (Appendix B) - Restart, Reset, Restore?

YouTube Video's will not load, is there a way to fix this?

I have flash installed and all YouTube video's will not load. In their place there is a black box when I right click on this box it says "movie not loaded..." and "about adobe flash player." All other flash related video's load fine it seems to be a problem only with YouTube. This problem persists into Google Chrome but not Internet Explorer.

This has been reported many times over the past 24 hours and if the solution hasn't been posted yet, one short-term workaround is to change from a regular session to a secure session.
Click in the URL and insert an s after http. In other words:
http://www.youtube.com/ ==> https://www.youtube.com/

Built Flash Video and will NOT show in Hosted Environment

Built Flash Video and will NOT show in Hosted Environment.
The files generated work on development machine. I posted the same
files in hosted environment and flash will not show. I first
thought it was Vista 64 IE 7 so I switched to XP IE7 and same
results. Still it is strange the falsh works locally. I am sure it
is something simple that I am missing. Any help would be
appreciated. Thank you.
Stan

Nickels55, I appreciate the response. Here are the
interesting facts. I had my hosting provider apply the mime type
and restart IIS. No flash video. I have Vista x64 Ultimate with I
think IIS 7 (the default IIS that comes with the OS.) The flash
video would not show in that environment until I applied the MIME
and then it WORKED. Yeah! But I still don’t have it working
on my web hosting provider with server Win2003. I thought it was
the hosting provider but I posted on my work server Win 2003 and
changed the MIME with a reset and could not get the video to work
there either.
I would like to try another angle here. Again I am using the
wizard to encode and publish the flash video. Maybe I don’t
have a settings correct. I can approach this a few ways.
1.) I can send my video to someone to post on their Win2003
server and see if they can get it going.
2.) Someone send me a short 3 second video that they produced
that they know it works on Win2003.
3.) Any other ideas? Surely someone in this universe has used
the flash wizard to encode a video and published to a Win2003
server. :)
I guess the other thing to note is when creating the flash
video I chose no controls (play, stop, pause). I want the video to
start when someone accesses the page for the first time.
Thank you for the help everyone.
Stan

I have a 5min. video that will not open.Osstatus error-54 appears. Can this problem be resolved, if so, HOW?

I have a 5 min. video that will not open the cause of which appears to be due to an osstatus-54 error. can this be resolved & if so, how?

It means that the orignal video file is missing which is not good news. How was the file placed on the backup hard drive? Can you select the file on the EHD and play it with Quicktime Player? That will tell you if the backup is a good backup.
OT

Mid 2011 21.5 inch iMac with lion video=freeze, will not restart for 30-60 minutes , today it took 14 hours before power button would restart it , is anyone else having a long restart after this problem?

mid 2011 21.5 inch iMac with lion video=freeze, will not restart for 30-60 minutes , today it took 14 hours before power button would restart it , is anyone else having a long restart after this problem?

Look in Activity Monitor (Applications - Utilities - Activity Monitor) and see if you have any runaway processes using a lot of %CPU.
I would also strongly recommend running Apple Hardware Test in Extended Mode. If it reports errors you can Google them or post them here.

Video Podcasts Will Not Sync; Audio Podcasts Do

I recently upgraded my iPhone 4 to the ios 5. Now when I sync my iPhone to iTunes, my video podcasts will not sync. I have not changed any of my settings, and I noticed "All podcasts" is selected under Podcasts section. Audio podcasts sync fine. All was fine until I did the recent software upgrade. Any ideas? Thanks for your help.

They are there. They are now under the "Video" app on the first page of your device. Seems like a pointless change to me. It took me a couple of days to find mine, too.

HT1414 On Ipad, I can open Sky/BBC news etc, but when I click on an article with video, it will not load. Any ideas

On my Ipad2 I can open Sky/BBCNews etc. but when I click on an article with video, it will not load. Any ideas
I also lost all content from my diary

If the video is in flash, then the iPad can't play it natively. You need to use different browser apps to access flash content. I see Puffin, iSwiffer recommended a lot.
You may also want to see if BBC has an app. things sometimes work better through an app than they do just through safari

My iPhone 4s will not adjust the potrait orientation

Hi,
My phone will not adjust the potrait orientation. It currently will just stay on vertical(potrait) and not move to horizontal(landscape). I also have the latest iphone update 7.0.3. Does anyone know if this is a bug or not? Or if there is an issue with my settings.
Thank You

nevermind already figured it out. If you go to you control center by swiping up on the home screen at the top right button you can lock/unlock the potrait orientation.

Video podcast will not upload onto iPod. Dimension changed!problem!

I usually subscribe to a specific vid podcast but lately i have noticed that my ipod will not sync the new vid podcasts. it's very frustrating! i have had a closer look and realised that the vids that don't sync into my iPod have a larger dimension 852x480 compared to the old 480x270. This is an MPEG-4 file. What is the problem? What should i do? Can i adjust the dimension? if yes how? I'm not sure if this is the problem but if there are any suggestions i'd appreciate them.

When the Sync finishes, do you see a message saying something like "video xxxx has not been transferred to your iPod because it cannot be played on this iPod"? If so, you could try highlighting the video in question and clicking on *Advanced/Create iPod or iPhone version* (it will be different wording if you are using iTunes 7 or earlier!).
However, unless iTunes 8 has "improved" this feature, it takes along time to convert and it does not always work. I gave up with the conversions.
The "problem" is probably caused by the Podcast producer changing the format of their Podcasts, possibly for a good reason. Check first in iTunes or even on the Podcast producer's web site, do they have a different Podcast (of the same programme) especially for the iPod and you are downloading the wrong one?
(Out of interest, what is the vid Podcast you are referring to, did you subscribe to it in iTunes?)
After that, you could try contacting the Podcast's producers to let them know what has happened. Bear in mind though, that Podcasts are produced independently of Apple/iTunes and are intended for all makes of MP3, not just iPods. So they may not care that only iPod users cannot watch it.
Good luck.

With purchased music videos they will not play, an error comes up"The requested URP was not fopund on thsi server", and video doesn't play?

I ahve purchased 5 music vidoes from iTunes and they will not play on my iPhone4. The error message that appears is:
"The requested URL was not fopund on this server"
I am not sure how to fix this so I can watch my videos?

It all depends on exactly how you move the library from one machine to the other. The database holding information about your library is normally in a folder called iTunes, with the media in a subfolder called iTunes Media. In this layout you can usually copy the entire iTunes folder from one machine to the other and it will work. If the media folder is split to a new location however then often the links to tracks will fail on a new computer.
You shoud find that the FindTracks script is able to repair the links in your library.
I'm not sure I know what is going on with the purchased music, however if you enable Edit > Preferences > Store > Automatic Downloads > Music you should be able to recover your past store purchases.
tt2

New Video iPod will not connect

I have a new video ipod that will connect on one computer but not the one I want to use. I have reloaded itunes several times and checked firewall. When I plug the ipod in the computer makes three dings. Is this an error code of some type? It will not show up in diagnostics and after trying it shuts down internet connection until computer is re-booted. It connects fine on the other computer. Has anyone got any answers? I have tried different plugs and it shows to charge just will not connect.
video Windows XP Sony Media Station Both computers

You want to check and see if the other computer has usb 2.0 first.
If it does try to reset the ipod while it is plugged into the computer. Reset is the menu and the center button on the ipod. Also make sure the hold switch is all white.
Also you want to make you that you try different usb ports.
If that doesn't work use msconfig type that into the search here on the support page let me know if this works.

Video Scopes will not adjust

Similar Messages

Maybe you are looking for